Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

O-RING

Awarded
SPE7L5-26-T-4335Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of 10 O-Rings with NSN 5331-12-361-2057 under solicitation number SPE7L5-26-T-4335, with a response deadline of July 20, 2026, and a required delivery within 79 days after award. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must be stripped of government identification if not accepted. The contract explicitly prohibits the use or incorporation of Class I ozone depleting chemicals, overriding any conflicting specification requirements without relieving product performance obligations; any substitute chemicals require prior approval unless already authorized. Asbestos is strictly forbidden in all supplied items, and any alternative materials must be approved under Clause L30 and Provision 4 conditions. The place of performance is Tracy, California, 95304-5000, and the contracting office is under the Department of Defense’s Land Supplier Operations Engines. Primary point of contact is Brent Bowman, reachable via email and phone provided. The solicitation is categorized under NAICS code 339991 and is open to federal entities.

General Info

Procure 10 O-RINGS NSN 5331-12-361-2057 by July 20, 2026, via DLA solicitation SPE7L5-26-T-4335.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$1,359

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

SEASERVE LOS ANGELES LLCView Profile

Award Issued Date

Documents

(2)

SPE7L526P2650.pdf

PDF

SPE7L5-26-T-4335.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseAwarded
Posted

Solicitation

Amendment 1

Contract was updated

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUSA

Full Description

Show more
DLA award SPE7L526P2650 posted on DIBBS. Awardee: SEASERVE LOS ANGELES LLC (CAGE 8YS20) Total Contract Price: $1,359.00 Award Date: 08-17-2026 Solicitation: SPE7L5-26-T-4335 Line items: - O-RING (NSN/Part 5331123612057, PR 7014131890)

Similar Contracts

Same NAICS industry code

NAICS: 326299
New
Federal
USCG Base Miami Beach Replacement Fenders
Solicitation # 31020PR260000231
The United States Coast Guard Base Miami Beach Facilities Engineering division is soliciting quotations for a firm-fixed-price contract to procure three high-performance, foam-filled marine fenders. These fenders must have a nominal diameter of 5 feet and a length of 8 feet, featuring a 100 percent closed-cell, cross-linked PE/PU foam core and a minimum 1.0 inch reinforced elastomeric polyurethane skin in non-marking marine black. All internal tension components, including the central chain/pipe assembly, swivel end fittings, and bow/anchor shackles, must be constructed exclusively from Type 316 stainless steel. The fenders must meet specific performance standards, including a minimum energy absorption of 136 ft-kip and a maximum reaction force of 101 kip, with quality assurance backed by an active ISO 9001 certification and recognized marine classification society approval such as ABS. This procurement is a 100 percent total small business set-aside under NAICS code 326299. The selected contractor will be responsible for providing technical data, mill test reports for all stainless steel hardware, and certified performance verification reports. Delivery is FOB Destination to USCG Base Miami Beach, Florida, and must be coordinated with a 48-hour arrival notification. Fabrication cannot begin until the Contracting Officer's Representative provides written approval of all submittals, which are due within 15 calendar days of the award. Award will be based on the best value, defined as the lowest evaluated price among technically acceptable offerors who meet the specified technical and past performance criteria.
Base MIAMI(00028)

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-Q-2418
Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.
Battery Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 9 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS