Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

O-RING

Active
SPE7L1-26-T-945CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 3,705 O-rings identified by NSN 5331-01-071-6500 under solicitation SPE7L1-26-T945C, with a delivery deadline of 74 days after award. All hardware must conform to the current revision of the governing military or consensus standards, and previously manufactured items built to earlier but當時有效的 versions of those standards remain acceptable. The item must be packaged and sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. The O-rings must be free of asbestos, and any substitutes must be approved under Clause L30 and Provision 4 conditions. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revision controls based on solicitation or award date depending on acquisition type. Full and open competition applies, and the place of performance is Hill AFB, Utah.

General Info

Procure 3,705 NSN 5331-01-071-6500 O-rings,-deliver in 74 days, comply with MIL-DTL-117, no asbestos, zero defects.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-945C for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristie Fown
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
FULL AND OPEN COMPETITION APPLY
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE
SPE7L1-26-T-945C
SECTION B
PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE
BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN
MILITARY SALES (FMS) AND STOCK SHIPMENTS.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5331-01-071-6500 Quantity: 3,705 EA Purchase Request: 7017601881QTY: 3705 Delivery: 74 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
PACKING MATERIAL
Solicitation # SPE7L3-26-T-170N
This contract pertains to the procurement of packing material designated by NSN 5330-01-413-1737, with a quantity of 40 units, under solicitation SPE7L3-26-T-170N. The material must comply with stringent packaging standards outlined in MIL-STD-2073-1E, including specific packaging methods, materials, and containment requirements, and must be marked in accordance with MIL-STD-129 without special marking codes. The packaging must additionally conform to DLA’s procurement guidelines, ensuring the use of a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, particularly for items susceptible to UV degradation. Hazardous materials regulations are strictly enforced: ozone-depleting chemicals are prohibited without exception, and mercury or mercury-containing compounds are banned unless explicitly permitted in functional components like batteries, fluorescent lamps, or specialized instruments, with additional safety measures required for contained mercury devices. Delivery is FOB origin with a 151-day delivery window, and no variance in quantity is permitted. Inspection and acceptance occur at the destination facility in Tracy, California, with shipping instructions and transportation protocols governed by DLA procedure notes C19 and C20. The contract mandates adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions tied to the solicitation or award date depending on acquisition size. The item is classified as a critical application item, and the supply must be delivered by January 19, 2027, to meet the original required delivery date of February 23, 2027. All packaging, labeling, and handling must align with federal supply classifications and DLA directives, ensuring interoperability and compliance across Defense Logistics Agency supply chains.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-943J
The contract is for a single O-RING with NSN 5331-01-378-8578, required for delivery within 20 days ADO under solicitation SPE7L1-26-T-943J, issued on August 9, 2026, with proposals due by August 20, 2026. The item is to be delivered to Fort Bragg, North Carolina, and the solicitation is managed by the Department of Defense’s Land Supply Chain through Kristina Derry at DLA. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, where technical specifications referenced by R or I numbers are incorporated by full text from the DLA website. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for approved functional uses such as batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. All non-accepted supplies must have government identification removed prior to return, and the NAICS code 339991 applies to this procurement.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
RING, WIPER
Solicitation # SPE7L4-26-U-1078
The contract is for the procurement of 5,349 units of a RING, WIPER with NSN 5330-01-493-5202 under solicitation SPE7L4-26-U-1078, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Deliveries are required within 97 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV deterioration, as stipulated for direct vendor delivery, foreign military sales, and stock shipments. All packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The product must be free of asbestos as defined by FED-STD-313 and palletization must meet DLA packaging standards. Sampling and inspection for conformance must follow MIL-STD-1916 or ASQ H1331 Table 1, or an approved zero-based sampling plan, with critical, major, and unspecified attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in the sample lot unless otherwise stated. The manufacturer may elect attribute or variable inspection under MIL-STD-1916, and MIL-STD-105 or ASQ Z1.4 may only be used to determine sample size, not acceptance criteria. Hazardous materials packaging and shipping must comply with IP025. The unit of issue is each, and the contract is issued under DLA Direct, CONUS coverage. The supplier for this item is Greene Tweed & Co Inc, part number 87582. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and the contract is subject to standard DoD procurement procedures and unit of issue conversions.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-168G
This contract specifies the procurement of 24 gaskets identified by NSN 5330-01-396-1030 under solicitation SPE7L3-26-T-168G, with a delivery requirement of 84 days ADO. The contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and amendment dates. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to protect against UV degradation of Federal Supply Classifications 5330/5331, applicable to direct vendor delivery, foreign military sales, and stock shipments. Strict prohibitions ban intentional addition of mercury or mercury-containing compounds to any supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, or NAVSEA-approved chemical reagents; portable devices containing mercury must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. The use of Class I ozone-depleting chemicals is forbidden, superseding all specifications except SPE7L3-26-T-168G, and any substitute chemicals require prior approval. Items must be asbestos-free, with previously accepted asbestos-containing parts no longer acceptable unless approved under Clause L30 and Provision 4 conditions. Configuration changes require formal engineering change proposals or variance requests, and certificates of conformance are authorized unless overridden by a quality assurance letter of instruction. MIL-STD-130N governs identification marking of government property, and full and open competition applies. The solicitation was posted August 9, 2026, with responses due August 20, 2026, and performance is centered in Tracy, California.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET AND PREFORMED P
Solicitation # SPE7L3-26-T-169U
The contract is for a GASKET AND PREFORMED PACKING SET with NSN 5330-00-786-5239, requiring delivery of 61 units within 165 days of award. It is a total small business set-aside under FAR 19.5, with a NAICS code of 339991, and is procured by the Department of Defense through the Land Supplier Operations Vehicle Support organization. The solicitation number is SPE7L3-26-T-169U, issued on August 9, 2026, with responses due by August 20, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the item is subject to DLA packaging standards. The gasket and preformed packing set involves technical data controlled under ITAR or EAR, restricting export and disclosure to foreign persons, including overseas employees and subsidiaries, unless authorized by the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaire, and have received explicit approval from the controlling DLA authority. Additionally, the supplier must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified as a third-party assessment organization, and the contract applicability includes covered defense information as defined in RD002. All government identification must be removed from non-accepted supplies, and delivery is to New Cumberland, PA, 17070-5002, with Susan Diamond as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, GAS
Solicitation # SPE7L3-26-T-170F
The contract solicitation is for 136 units of a gas seal identified by NSN 5330-00-975-0888, with a delivery requirement within 90 days of award. The item must be free of asbestos, and any alternative materials or substitutions must comply with Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must meet DLA procurement standards, and government identification must be removed from non-accepted supplies. Covered Defense Information provisions apply, and all items must comply with MIL-STD-130N for identification marking. The solicitation number is SPE7L3-26-T-170F, posted on August 9, 2026, with responses due by August 20, 2026. The contracting activity falls under the Department of Defense, specifically the Land Supplier Operations Vehicle Support office, with performance located in Bremerton, Washington, 98314-6001. Primary point of contact is Susan Diamond, reachable via email and phone provided.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAIN
Solicitation # SPE7L3-26-T-169Q
The contract pertains to the procurement of 734 units of a packing with retainer item identified by NSN 5330-00-601-4932 and part number 600-0000-1/2, supplied exclusively by Parker Hannifin Corporation of San Diego, CA. The item is classified as a commercial item and must comply with strict material restrictions, including a complete prohibition of asbestos as defined by FED-STD-313 and the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents approved by NAVSEA. Portable devices containing mercury must be shock-proof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. All packaging and manufacturing must adhere to the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Government identification must be removed from non-accepted supplies, and covered defense information protocols apply. The solicitation number is SPE7L3-26-T-169Q, with a response deadline of August 20, 2026, and a required delivery within 62 days of award. The place of performance is Robins AFB, GA, and inquiries should be directed to Susan Diamond at DLA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-328B
The contract pertains to the procurement of 1,094 O-RINGS with NSN 5331-00-618-0800 under solicitation SPE7M4-26-T-328B, issued by the Department of Defense’s Fluid Handling Division. The requirement is fully competitive and governed by applicable military or federal specifications, with technical and quality criteria referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed as per RQ011. The contract also incorporates provisions related to covered defense information under RD003. Delivery is required within 165 days after order, with performance to occur at Robins Air Force Base, Georgia, zip code 31098-1887. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and the primary point of contact is Blake Tushar, reachable via email or phone provided. This procurement falls under NAICS code 339991 and is managed through the DLA’s eProcurement system.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7L1-26-T-945G
The contract pertains to Production Lot Testing for NSN 0001S00000062 with a quantity of 1,378 units, requiring the contractor to conduct and document testing in accordance with the technical data package, ensuring all actual test results and tolerances are clearly displayed. The contractor must prepare a Production Lot Test Report labeled with the contract and lot numbers, present it to the Quality Assurance Representative for review, and attach required documentation to all shipments including DD Form 1222 and DD Form 250/iRAPT signed by the QAR, a copy of the contract, all relevant test reports, material and process certifications, inspection and operation method sheets, and drawings used in manufacturing the tested sample, with appropriate markings to restrict public disclosure and limit government use as necessary. The solicitation number is SPE7L1-26-T-945G, issued by the Department of Defense under the Land Supply Chain, with a response deadline of August 20, 2026, and a delivery requirement of 145 days after contract award. The place of performance is New Cumberland, PA, and the primary point of contact is Robert Warne, reachable via email and phone as provided.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAINER
Solicitation # SPE7L3-26-T-170D
This contract, identified by solicitation number SPE7L3-26-T-170D, requires the supply of 1,284 units of PACKING WITH RETAINER under NSN 5330-01-014-4316, with delivery due within 150 days after award. The item must comply with stringent packaging standards, including encapsulation in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, particularly for Federal Supply Classifications 5330/5331 that contain National Stock Numbers vulnerable to sunlight exposure. This packaging requirement applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. The contract prohibits the intentional use of mercury or mercury-containing compounds in direct contact with the supplied hardware, except for specific functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and chemically specified reagents approved by NAVSEA; when mercury-containing portable lamps or instruments are permitted, they must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. All items must be asbestos-free and any alternatives to previously approved asbestos-containing components require formal approval per SPE7L3-26-T-170D. The supplied goods must also be marked in accordance with MIL-STD-130N for U.S. military property identification, and government identification must be removed from any non-accepted supplies. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and compliance with CMMC Level 2 self-assessment is mandatory to meet cybersecurity standards. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and performance is to be delivered to Robins AFB, Georgia, under the oversight of the Department of Defense's Land Supplier Operations Vehicle Support office.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L3-26-T-168J
This contract specifies the procurement of a plain seal with part number 623-00015-5, supplied by Parker-Hannifin Corporation and Denison Hydraulics UK, under the national stock number 5330-01-324-7020. A total of 39 units are required at a unit price of $39.00, for a total contract value of $1,521.00, with delivery due within 97 days FOB origin. The item is designated as a critical application item and is strictly prohibited from containing any asbestos as defined by FED-STD-313. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, requiring medium duty, waterproof, greaseproof, opaque packaging for all direct vendor deliveries, foreign military sales, and stock shipments. Marking must follow MIL-STD-129 with no special marking codes applied, and palletization must adhere to DLA packaging requirements. Inspection and acceptance occur at the destination, with zero variance permitted in quantity. The shipment is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of July 9, 2026, and an original delivery deadline of December 5, 2026. The contract is a total small business set-aside under NAICS code 339991, issued by the Department of Defense under solicitation SPE7L3-26-T-168J.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L3-26-T-169D
The contract pertains to the procurement of 20 units of a SEAL, PLAIN ENCASED item identified by NSN 5330-01-631-6176, with a delivery requirement of five days after order placement. All supplied items must be free of asbestos, and any prior components containing asbestos are strictly unacceptable unless an alternate material is formally approved under Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The solicitation number is SPE7L3-26-T-169D, issued on August 9, 2026, with responses due by August 20, 2026. The purchase request number is 7017786031, and the place of performance is Fort Bliss, Texas, with a ZIP code of 79918-2527. The contracting office is under the Department of Defense, specifically the Land Supplier Operations Vehicle Support, and the primary point of contact is Lee Miller, reachable at lee.miller@dla.mil or 614-216-3422. The NAICS code is 339991, indicating a federal procurement under a non-set-aside framework.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-943E
The contract pertains to a non-NSN item with part number 5GQU3FMRB1003N1820A3E10B3SSP1P8 sourced from COTTERMAN CO USA located in Croswell, Michigan, with a total quantity of two units to be delivered in 20 days. Delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling, with palletization adhering to DLA’s RP001 packaging requirements, and packaging unit quantity specified as one per unit pack. The destination for delivery and marking is Camp Carroll, Waegwan, Korea, under the W50YED code, with transportation governed by DLAD Proc Notes C19 and C20. The contract reference is SPE7L1-26-T-943E, with an original required delivery date of August 7, 2026, and a purchase request number of 7017798068. The unit price is not provided but the total cost is implied as two units at the listed price line, with government use indicators and procurement details including the DLA point of contact and contract type classified as a solicitation.
All Other Miscellaneous Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L1-26-T-944L
This contract specifies the procurement of one unit of a box and accessories identified by NSN 2540015981937 under solicitation SPE7L1-26-T-944L, with a required delivery within five days of award and a firm delivery date of August 4, 2026. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications including ASTM D3951 for packaging. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements, with hazardous materials packaged according to TQ requirement IP025 if classified per FED-STD-313. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly permitted by the specification. The item is to be delivered FOB origin with no quantity variance permitted, inspected and accepted at destination, and must be shipped via the fastest traceable means, excluding parcel post. Shipping instructions direct delivery to the DLA Distribution Management Office in Yermo, California, with an alternate parcel post address in Barstow, California. The unit of issue is each, priced at $1.00, with total value of $1.00, and the contract includes strict government-use identifiers and tracking data for logistics coordination.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CLAMP, HUB
Solicitation # SPE7L1-26-T-947J
The contract pertains to the procurement of six CLAMP, HUB units under solicitation SPE7L1-26-T-947J, with a firm delivery deadline of 20 days after order placement. The acquisition is governed by stringent Department of Defense standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, where the applicable revision is controlled by the solicitation issue date. Cybersecurity requirements mandate CMMC Level 2 certification through an approved Third-Party Assessment Organization, ensuring robust information protection practices. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program credential, complete mandatory DOD export control training, and receive explicit approval from DLA to access controlled data, with DFARS 252.225-7048 fully applicable. Additionally, government identification must be removed from any non-accepted supplies. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 333613. Point of contact is Kristina Derry, reachable via email and phone provided.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336350
New
DIBBS
DISK ASSEMBLY
Solicitation # SPE7L1-26-T-945B
The item under contract is a disk assembly manufactured through a forging process, with stringent technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. Critical welding per Drawing 10861595 must meet specifications outlined in Drawing 12479550, including mandatory preproduction submission of the contractor’s welding procedure specification. Inspection and acceptance must occur at the manufacturer’s facility, with technical verification required—count, kind, and condition inspections are prohibited. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified, and critical, major, and minor attributes are assigned verification levels or AQLs as defined. The product is classified as a critical application item and must not contain Class I ozone-depleting chemicals; any substitutes require prior approval. Configuration changes require formal engineering change proposals or variance requests. Packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129, with specific materials and methods detailed, and palletization aligned with DLA requirements. Final delivery is FOB origin, with no tolerance for quantity variance, and the item must be delivered by January 11, 2027, to the DLA distribution facility in New Cumberland, Pennsylvania. The solicitation is set aside for Women-Owned Small Businesses under NAICS code 336350, with unit price of $58.00 for a total of 58 units, and the contract data references the full technical documentation controlled by multiple drawing revisions dating back to 1965 and updated through 2022.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L1-26-U-0557
The contract pertains to the procurement of a power supply with part number TH-4322, supplied by Arnold Magnetics Corporation under solicitation SPE7L1-26-U-0557, with a total quantity of 10 units at a unit price of $10.00, delivered FOB origin within 127 days. The item is covered under a Total Small Business Set-Aside and is classified as a critical application item. It must comply with DLA packaging requirements including MIL-STD-2073-1E and MIL-STD-129 for marking, and all bare items must be marked with the contract number, NAWC CAGE code, and part number unless superseded by technical drawings. Technical and quality requirements are incorporated by reference from the DLA Master List, and sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited except for specific functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical analysis reagents specified by NAVSEA, and any portable items containing mercury must include shockproof construction and secondary containment per NAVSEA 5100-003D. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and cybersecurity compliance requires a CMMC Level 2 self-assessment. The NSN is 6130014614336, the unit of issue is EA, and the inspection and acceptance points are at destination with zero variance allowed on quantity.
Motor and Generator Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332111
New
DIBBS
GUIDE, CAM FOLLOWER, FO
Solicitation # SPE7L1-26-T-946Y
The contract pertains to the procurement of a Guide, Cam Follower, Folding Floor, identified by NSN 5340-01-540-4920 and part number 7017777897, with a quantity of 64 units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered provisions including packaging standards, removal of government identification from non-accepted supplies, and qualified products or manufacturers lists. The item must comply with stringent quality assurance protocols, including mandatory Certificates of Quality Compliance and Metal Certification, which are to be submitted as part of the Contract Data Requirements Lists. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. Technical documentation, including drawings and quality assurance provisions, is referenced under Revision D of the Technical Data Package dated through 2025. Delivery is FOB origin with inspection and acceptance occurring at destination, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with no special marking. The product must be palletized according to DLA packaging directives and shipped to the designated facility in Tracy, California. The delivery deadline is 116 days from contract award, with an original required delivery date of April 7, 2027, and a need ship date of February 5, 2026. The unit price is $64.00, resulting in a total contract value of $4,096, and the solicitation was issued under SPE7L1-26-T-946Y with responses due by August 20, 2026.
Iron and Steel Forging

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
INJECTOR ASSEMBLY, F
Solicitation # SPE7L1-26-T-946Q
The contract is for one fuel injector assembly, part number 4928260 with NSN 2910-01-710-6138, designated as a critical application item under solicitation SPE7L1-26-T-946Q. The item must be delivered in a single unit within 20 days, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined including unit container E5 and intermediate container E5. Palletization must follow RP001 DLA packaging requirements, and no special marking is required. The delivery destination is the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia, but parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The original required delivery date is August 10, 2026, and the contract includes project code ZH9 TP 2 and government-use identifiers for tracking. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 336310 for motor vehicle parts manufacturing, managed by the Department of Defense's Land Supply Chain.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
PROPELLER SHAFT WIT
Solicitation # SPE7L1-26-T-944M
The contract pertains to the procurement of a propeller shaft with a universal joint, identified by NSN 3010-01-122-5657 and part number 13026540, supplied by GE Aviation Systems LLC and Whippany Actuation Systems LLC. Eight units are required to be delivered within 165 days from the order date, with delivery terms set as FOB origin and inspection and acceptance occurring at the destination. The items must be packaged in strict compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling. Packaging must follow RP001 DLA Packaging Requirements for Procurement and be palletized accordingly. The contract includes mandatory compliance with CMMC Level 2 cybersecurity self-assessment and applies to covered defense information as outlined in RD002. Pricing is fixed at $8.00 per unit for a total of $64.00, with zero variance allowed in quantity. The delivery destination is DLA Distribution Red River in Texarkana, TX, with the required ship date set for February 2, 2027. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, whose controlling revision depends on the acquisition type and solicitation amendment dates. The contract is issued under solicitation SPE7L1-26-T-944M, with a primary point of contact at DLA for inquiries.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 322219
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-944J
This contract under solicitation SPE7L1-26-T-944J specifies the procurement of 52 units of a COVER, ACCESS item with NSN 5340-01-322-3592, to be delivered FOB origin within 74 days of contract award with no variance allowed in quantity. All items must comply with strict technical, quality, and packaging standards including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with no special markings required. The product is classified as a critical application item and must adhere to the technical drawing revision B dated 01/20/2023. Zero tolerance is enforced for non-conformances in sampling, requiring zero defects under MIL-STD-1916 or comparable zero-based plans, with attributes assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract prohibits the use of ozone-depleting chemicals and mercury or mercury-containing compounds in any part of the product, preservation, packaging, or marking, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents, all of which must incorporate secondary containment if used. Packaging must meet DLA’s requirements including palletization and shipping standards, with delivery directed to the specified warehouse in Tracy, CA. The contract enforces configuration change management and requires formal requests for any deviations or waivers. Quality assurance allows for a Certificate of Conformance unless overridden by a Quality Assurance Letter of Instruction. This is a total small business set-aside under NAICS 322219 with full and open competition, and all documentation references the DLA Master List of Technical and Quality Requirements. The delivery deadline is December 6, 2026, with an original ship date of November 3, 2026.
Other Paperboard Container Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-943K
The contract is for a single helical compression spring identified by NSN 5360-01-248-1585, with a delivery requirement of 10 days after award. The solicitation number is SPE7L1-26-T-943K, issued on August 9, 2026, with responses due by August 20, 2026, under a federal procurement process managed by the Department of Defense’s Land Supply Chain. The item is intended for performance at Fort Bragg, North Carolina, and the procurement falls under NAICS code 332613 for spring manufacturing. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions controlled by the solicitation issuance or award date depending on acquisition type. Packaging must comply with DLA packaging standards and any non-accepted supplies must have government identification removed prior to return. The primary point of contact is Kristina Derry, reachable via email and phone provided, and all relevant information is accessible through the DIBBS portal.
Spring Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L1-26-T-945T
This contract pertains to the procurement of 50 units of a firearm component identified by NSN/Part Number 0001S00000053 under solicitation SPE7L1-26-T-945T, with a delivery deadline of 300 days after contract award. The item is subject to stringent technical, quality, and compliance requirements under the DLA Master List of Technical and Quality Requirements, including configuration control via engineering change proposals and variance requests. The supplier must meet tailored quality standards applicable to both manufacturers and non-manufacturers and comply with inspection and acceptance procedures conducted at origin. Components must be sourced from qualified products or manufacturers listed on approved QPLs or QMLs, and the supplier must adhere to DLA packaging specifications. The item is classified as a Category I munition, requiring compliance with militarization protocols and the removal of government identification from non-accepted items. The contract imposes strict controls on technical data, classifying it as subject to ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons regardless of location. Only DLA contractors with JCP certification, completed export control training, and official DLA authorization may access this data. The use of ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval. The supplier must also maintain CMMC Level 2 certification as a C3PAO and hold phosphate coating supplier certification. All work must comply with the technical and quality provisions referenced in the DLA Master List, with revisions determined by the solicitation issue date. The point of contact for inquiries is Miguel Acevedo, and performance is to occur in New Cumberland, PA.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details