Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

O-RING

Active
SPE7L1-26-T-860CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 240 O-rings with NSN 5331-01-734-8727 under solicitation number SPE7L1-26-T-860C, with a response deadline of August 3, 2026, and delivery required within 186 days of award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Packaging must comply with DLA standards, and all items must be free of asbestos and ozone-depleting chemicals, with any substitutions requiring prior approval unless explicitly authorized. Government identification must be removed from non-accepted supplies, and covered defense information provisions apply. Documentation for source approval requests must be submitted as required. The place of performance is New Cumberland, Pennsylvania, with Robert Warne of the Department of Defense’s Land Supply Chain as the primary point of contact, reachable via email and phone provided. The NAICS code is 333618, and this solicitation is issued by a federal agency under the Department of Defense.

General Info

Procure 240 O-rings NSN 5331-01-734-8727 by Aug 3, 2026, deliver in 186 days, DLA standards, no asbestos or ozone-depleting chemicals.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

333618 - Other Engine Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Robert Warne
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5331-01-734-8727 Quantity: 240 EA Purchase Request: 7017385430QTY: 240 Delivery: 186 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333618
New
DIBBS
CONNECTING ROD, PISTONThe contract is for the procurement of 22 connecting rods and pistons with NSN 2815-01-271-5119 under solicitation SPE7L5-26-T-4536, issued by the Department of Defense through the Land Supplier Operations Engines office. Delivery is required within 131 days to the DLA Distribution Red River receiving facility in Texarkana, Texas, with FOB origin terms and no variance allowed in quantity. The item is designated as a critical application component, and manufacturing may involve casting or forging, requiring potential tooling support that the government does not possess; contractors must submit a Casting and Forging Assistance Request if needed. Packaging must strictly comply with MIL-STD-2073-1E, including heat-sealed barrier bags for cleanliness and adherence to preservation method 33, using approved materials and packing codes, while marking follows MIL-STD-129 with special code 24 indicating open inspection eligibility. DLA’s Prime Initiative mandates minimized plastic packaging without compromising protection. The unit of issue is each, at a fixed price of $22.00 per unit, totaling $484.00, with inspection and acceptance occurring at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I codes, with the applicable revision determined by the solicitation issue date. The contract’s point of contact is Bradley Evans, and full details are accessible via the provided DIBBS link.
LAND SUPPLIER OPNS ENGINES

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
BRACKET, ENGINE MOUN
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
CAMSHAFT, ENGINE
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
O-RING
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
SPRAY TIP, FUEL INJECTI
LAND SUPPLIER OPNS ENGINES

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, INTAThis contract specifies the procurement of a filter element with part number 01319257 and NSN 2940016815047 under solicitation SPE7LX-26-U-8919, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement covers 108 units to be delivered FOB origin within 41 days, with no variance allowed in quantity, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containerization, with marking adhering to MIL-STD-129 and no special marking codes required. The contract explicitly prohibits the use of Class I ozone-depleting chemicals in any component or process, overriding any conflicting specification requirements, and requires prior approval for all alternative substances. It is a total small business set-aside under NAICS code 333618, with technical and quality requirements incorporated by reference from the DLA Master List, governed by the revision effective on the solicitation issue date. The unit of issue is each, and while the quantity is listed as estimated, it is fixed at 108 units with no flexibility for adjustment.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
HOUSING, MECHANICALThis contract pertains to the procurement of housing and mechanical components under solicitation SPE7LX-26-U-8902, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The item, identified by NSN 3040-01-579-4844 and part number 5007686, is subject to strict compliance with DLA’s packaging and identification standards, including Item Unique Identification (IUID) per MIL-STD-130 and labeling requirements under MIL-STD-129. Packaging must adhere to ASTM D3951, but DLA’s Master List of Technical and Quality Requirements supersedes any conflicting standards. The unit of issue is each (EA), with a quantity of 25 units, priced at $25.00 per unit, totaling $625.00. Delivery is due within 130 days under FOB Origin terms, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract is a total small business set-aside under NAICS code 333618, with a response deadline of August 5, 2026, and no guaranteed purchase by the IDC due to estimated quantities. All packaging and palletization must conform to DLA’s RP001 requirements, and government identification must be removed from non-accepted supplies per RQ011. Contact for inquiries is Theodore Misiolek, with primary email and phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
CORE, RADIATOR
LAND SUPPLIER OPNS ENGINES

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
LINKAGE, ADJUSTABLE
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
Federal
28--LINKAGE,ADJUSTABLE
DLA Land And Maritime

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
Federal
29--SPRAY TIP,FUEL INJECTI
DLA Land And Maritime

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
Federal
29--FILTER ELEMENT,INTA
DLA Land And Maritime

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 335931
New
DIBBS
TERMINAL BOXThis contract issued by the Defense Logistics Agency specifies the procurement of a Terminal Box with NSN 5940016626042, under solicitation SPE7L1-26-T-859G, requiring one unit to be delivered within ten days FOB origin with no quantity variance permitted. The item is designated as a critical application item for Oshkosh Defense LLC, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with compliance controlled by the revision in effect on the solicitation issue date. The product must not contain any Class I ozone-depleting chemicals, and any substitutes must be pre-approved unless explicitly permitted by specification. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA’s packaging guidelines, and no special marking required. Delivery is directed to the Distribution Management Office at MCAS Kaneohe Bay, Hawaii, with transportation governed by DLA procedural notes C19 and C20. The contract includes detailed logistics identifiers including freight shipping and mark-for addresses, mission code M02211, and project code TP 2, with an original required delivery date of July 16, 2026. All units are specified in the DoD authorized unit of issue, and the contract’s financial terms reflect a unit price of $1.00 for a total value of $1.00. Government-specific codes and administrative identifiers are provided for internal processing, including IPD, DIC, and FC codes, and contract performance is supervised by Kristina Derry of the Department of Defense’s Land Supply Chain.
Current-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTINGThe contract pertains to the procurement of a single mounting plate, identified by NSN 5340-01-508-3732 and part number 7139998, under solicitation SPE7L1-26-T-857W. The item is to be delivered in one unit within 20 days of contract award, with delivery terms set at FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, methods, and marking requirements without special markings. The item is not classified as hazardous, and palletization must adhere to DLA packaging standards. Delivery is directed to the Distribution Management Office at Camp Kinser, Japan, with transportation governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications, with the applicable revision controlled by the solicitation issue date. The purchase request number is 7017559669, and the required delivery date is July 17, 2026. The contract is under the Department of Defense’s Land Supply Chain, with the primary point of contact being Michael Nordahl, and the solicitation response deadline is August 3, 2026.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThe contract is for the procurement of 36 helical compression springs, identified by NSN 5360-00-998-3455 and part number WA-2958, supplied by Breeze-Eastern LLC under the solicitation number SPE7L1-26-T-857A. The item is classified as a commercial item of a type and designated as critical application, requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 requirements. Delivery is set for five days after award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The goods must be shipped via traceable freight methods only, not parcel post, to the designated receiving point at Hill AFB, Utah, under RDD 777 and Project AWP TP 1. The original required delivery date is July 20, 2026, and the item is subject to government use codes and procurement controls. The unit of issue is each, priced at $36.00 per unit, with a total contract value of $1,296.
Spring Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKETThis contract pertains to the procurement of a gasket with part number 2208-F-370 and NSN 5330-01-161-9964, with a required quantity of three units. The item must strictly comply with federal standards prohibiting the use of asbestos as defined in FED-STD-313. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The gasket must be delivered within five days after award to Fort Hood, Texas, 76544. The solicitation number is SPE7L1-26-T-857D, posted on July 21, 2026, with responses due by August 3, 2026. The procurement is administered by the Department of Defense’s Land Supply Chain under NAICS code 339991, and all supplies must be free of government identification if not accepted. Primary point of contact is Kristina Derry, reachable via email or phone at the provided details.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326211
New
DIBBS
WHEEL ASSEMBLY, PNEUThe contract specifies the procurement of a single pneumatic wheel assembly with part number 2530-01-665-3350 under solicitation SPE7L1-26-T-858X, requiring delivery within 10 days to a military facility in Iwakuni, Japan, with FOB origin terms and no tolerance for quantity variance. The item is classified as a Type I shelf-life item with a strict 60-month non-extendable lifespan, requiring adherence to MIL-STD-129 for shelf-life markings and MIL-STD-2073-1E for packaging, with preservation conforming to MIL-DTL-4 standards for non-aircraft tires. All packaging and palletization must comply with DLA’s RP001 requirements, and government identification must be removed from non-accepted supplies. Sampling must follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless stated otherwise. The use of Class I ozone-depleting chemicals is expressly prohibited, and any substitutions require prior approval. Inspection and acceptance occur at the destination, and the item must be marked with the special shelf-life code 32. Technical and quality requirements are governed by the DLA Master List, with compliance mandatory, and units of issue follow DoD authorized standards. The contract was posted in July 2026 with a response deadline in August 2026, and the required delivery date is set for July 17, 2026.
Tire Manufacturing (except Retreading)

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
COVER, DIALThe contract pertains to the procurement of one unit of a COVER, DIAL with NSN 5355-00-953-5506 under solicitation SPE7L1-26-T-856Z, issued by the Department of Defense's Land Supply Chain. The item is classified under NAICS code 327999 and is subject to DLA Packaging Requirements for Procurement, incorporating all applicable technical and quality standards identified by R or I numbers as defined in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. Compliance with these standards is mandatory, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The supplier must ensure the item does not contain Class I ozone-depleting substances, in alignment with DLA technical and standardization directives from a 1993 meeting. Delivery is required within five days after date of award to Hill AFB, Utah, zip 84056-5713. The primary point of contact is Kristina Derry, reachable via email and phone listed in the contract data, and responses must be submitted by August 3, 2026. No government identification is to be removed from non-accepted supplies as per regulatory protocol.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEALThis contract pertains to the procurement of 24 units of a specific item identified by NSN 5330-99-379-1132 and part number G413/4604/14, supplied by KNDS DEFENCE UK LIMITED under solicitation SPE7L1-26-T-859D. The item has been specifically excluded from the First Destination Packaging Program and is not eligible for standard commercial packaging, requiring instead compliance with MIL-DTL-117, Type II, Class C, Style 1, meaning it must be sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation. Packaging must follow MIL-STD-2073-1E with specific preservative methods, cushioning material, and unit container specifications, while marking must adhere to MIL-STD-129 with the special code “20 – Do Not Bend.” The item is subject to the DLA Master List of Technical and Quality Requirements, with any referenced R or I numbers governing its technical and quality standards. Delivery is required within five days of order placement, FOB origin, with no tolerance for quantity variance. The shipment must be sent by the fastest traceable means, excluding parcel post, to the designated DLA depot in Texarkana, Texas, with a required delivery date of July 20, 2026. The contract specifies that hazardous materials packaging standards apply and includes detailed government tracking information, including project code TP 1 and government use identifiers.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
RACK, STORAGE, SMALLThe contract is for the procurement of 16 units of a small storage rack system under solicitation SPE7L1-26-T-859J, a total small business set-aside with NAICS code 332994, issued by the Department of Defense’s Land Supply Chain. Each unit is priced at $16.00, with a total contract value of $256.00, and delivery is required FOB origin within 20 days of the order, with inspection and acceptance occurring at the destination. The item is identified by NSN 1095-01-710-8626 and must comply with precise packaging standards per MIL-STD-2073-1E, including specific materials for wrapping, cushioning, and containment, as well as marking in accordance with MIL-STD-129 and palletization as defined by DLA Packaging Requirements. Supply chain traceability documentation must be retained by the contractor per DLA Procurement Note C03, and government identification must be removed from non-accepted items. Two separate deliveries are scheduled, one for July 16, 2026, and another for July 20, 2026, both destined for Fort Carson, Colorado, with transportation logistics governed by DLA Procurement Notes C19 and C20. The contract includes strict quantity controls with zero variance tolerance, and the point of contact for inquiries is Zane Zwayer.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRANThis contract pertains to the procurement of one branched wiring harness with part number 4389581 and NSN 6150016585192, issued under solicitation SPE7L1-26-T-859A by the Department of Defense through the Land Supply Chain. Delivery is required within five days of contract award, with shipment originating from the supplier’s location and delivered FOB origin to the Marine Wing Support Squadron 373 in San Diego, CA. The item must comply strictly with DLA packaging standards defined in MIL-STD-2073-1E and MIL-STD-129 for marking, and must not be shipped via parcel post. The unit of issue is each (EA), with no quantity variance permitted. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must adhere to the revision in effect on the solicitation issue date. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions require prior approval unless explicitly authorized by the specification. Packaging and palletization must follow DLA’s procurement guidelines, with specified intermediate containers and preservation methods. The required delivery date is July 22, 2026, and the item is designated for government use only with associated military logistics codes. The point of contact for inquiries is Kristina Derry, and the solicitation response deadline is August 3, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to the procurement of a single gasket item identified by NSN 5330-01-681-2991 under solicitation SPE7L1-26-T-859H, with a required delivery within 20 days after award. The item is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. It must comply with MIL-STD-130N for identification marking and be packaged in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1 to protect against UV degradation, applicable to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. The gasket must be free of asbestos and any substitute materials must be formally approved under clause L30 and provision 4 conditions. Use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification but not exempting compliance with other product requirements. The item carries a non-extendable shelf life of 180 months per RS001 for TYPE I (CODE Y). Full and open competition applies, and the solicitation is managed by the Department of Defense’s Land Supply Chain with Kristina Derry as the primary point of contact, with responses due by August 3, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR CThis contract pertains to the procurement of one unit of a vehicular bracket designated by part number LS1104696 and NSN 2590-01-661-6799, issued under solicitation SPE7L1-26-T-858F by the Department of Defense through the Land Supply Chain. The item must be delivered within five days to Fort Benning, Georgia, FOB origin, with no variance allowed in quantity and inspection and acceptance taking place at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes applied. The bracket must be palletized in accordance with DLA standards and shipped via traceable freight methods, explicitly excluding parcel post. Ozone-depleting chemicals are strictly prohibited in manufacturing or incorporation, and any substitute materials require prior approval unless already authorized by specification. The delivery is linked to a specific government shipment identifier, with a required delivery date of July 22, 2026, and the supply chain point of contact is Kristina Derry. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to the supply of two gaskets identified by NSN 5330-01-664-7095 under solicitation SPE7L1-26-T-859B, with a response deadline of August 3, 2026, and a required delivery within five days of award. All supplies must comply with the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on procurement scale. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1—using a medium duty, waterproof, greaseproof, opaque bag—to protect items from UV degradation, and this applies to direct vendor delivery, foreign military sales, and stock shipments. The gaskets must be free of asbestos, and any alternative materials require formal approval under Clause L30 and Provision 4 conditions. Mercury or mercury-containing compounds are strictly prohibited unless part of functional components like batteries, fluorescent lights, weapons systems, or specified reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment system per NAVSEA 5100-003D. All items must be marked in compliance with MIL-STD-130N for U.S. military property identification, and government identification must be removed from non-accepted supplies. The contract is managed by the Department of Defense’s Land Supply Chain, with performance occurring in West Bath, Maine, and primary point of contact being Kristina Derry.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details