Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

O-Ring Fabrication and Manufacturing

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and manufacturing of 19 high-precision, asbestos-free O-rings for the DLA Weapons Support Land Supply Chain. The components must be produced according to NSN 5331-01-455-7990 dimensions and RA001 technical requirements. Acceptable production methods include industrial rubber molding or machining, though additive manufacturing is strictly prohibited. The selected provider must maintain ITAR/EAR compliance and hold US/Canada Joint Certification Program certification. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 23, 2026.

General Info

Fabricate 19 precision O-rings for DLA by October 23, 2026, in Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

326150 - Urethane and Other Foam Product (except Polystyrene) Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-1131.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

O-RING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures high-precision O-rings for prime contractors delivering DLA Weapons Support Land Supply Chain contracts. Fabricates O-rings to NSN 5331-01-455-7990 dimensions and RA001 technical requirements using industrial rubber molding or machining; additive manufacturing is prohibited. Requires ITAR/EAR compliance and US/Canada Joint Certification Program (JCP) certification. Delivers 19 finished, asbestos-free O-rings.

Similar Contracts

Same NAICS industry code

Packaging Cushioning Material SupplierThis subcontract involves the supply of specialized packaging cushioning material for prime contractors working on Department of Defense projects under Construction and Equipment Containers. The supplier is required to provide eight units of material matching NSN 8145013533277, ensuring full compliance with MIL-STD-2073-1E and the DLA Packaging Requirements for Procurement RP001. The contract specifies a delivery timeline of 167 days with shipping terms set as FOB Origin. Performance for this requirement is centered in Tracy, California, under NAICS code 326150. Interested parties must have responded by the deadline of October 26, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Custom Protective Foam Inserts for Electric ContainersThis subcontract, issued by Construction and Equipment Containers for the Department of Defense, involves the fabrication and supply of 37 sets of custom-cut protective foam inserts. These inserts must be manufactured to P/N 14513 specifications to secure electric components within shipping containers for DLA Troop Support projects. The contractor is required to ensure that material density meets all technical requirements and that the foam blowing agents used contain no Class I ozone-depleting chemicals. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326150, with the place of performance located in Tracy, California. Interested parties must respond by October 26, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Supply of Polyimide Foam Thermal Insulation Blocks (NSN 5640-01-371-3262)This small business set-aside subcontract through the General Services Administration involves the manufacture and supply of open-cell polyimide foam thermal insulation blocks under NSN 5640-01-371-3262. The contractor is responsible for producing 200 Type II faced panels measuring 36.0 by 24.0 by 2.0 inches, featuring Class 1 fibrous glass cloth facing. All materials must strictly adhere to MIL-DTL-24688 Revision A Amendment 1 and QPL-24688 standards, and the provider must supply OSHA/GHS compliant Safety Data Sheets. The agreement specifies delivery of the units FOB Destination to Vista, California, with performance associated with the Kansas City area. Managed by the Supply Chain Management Contracting Division of the GSA/FAS/GSS/QSCB, the contract falls under NAICS code 326150. The solicitation period is brief, with a posting date of October 14, 2026, and a response deadline of October 20, 2026.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

NSN 5640013713262; INSULATION BLOCK, THERMAL

Solicitation # 47QSSC26Q7586

Solicitation 47QSSC26Q7586 is a brand name or equal procurement for 200 sheets of thermal insulation blocks under NSN 5640013713262. The required material must be an open-cell polyimide foam, Type II faced panel, Class 1 fibrous glass cloth faced, with nominal dimensions of 36.0 inches in length, 24.0 inches in width, and 2.0 inches in thickness. All products must comply with MIL-DTL-24688 Revision A Amendment 1 and QPL-24688. This is a total small business set-aside under NAICS 326150, and because it falls under the Simplified Acquisition Threshold, the nonmanufacturer rule does not apply. The contract is an all-or-none award based on the lowest evaluated price among responsible offerors who pass administrative and technical acceptability screenings. To be considered valid, quotes must include the completed Request for Quote document and the MIL STD 129R compliance form submitted via email to the designated point of contact. Delivery is FOB Destination, CONUS, with a primary shipping location in Vista, California. Strict adherence to packaging and marking standards is required, including MIL-STD-129R for military deliveries and the provision of OSHA/GHS compliant Safety Data Sheets with each transport package.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

Sound Controlling Boards

Solicitation # 47QSSC-26-Q-0266

The General Services Administration, Supply Chain Management Contracting Service Center, is soliciting quotes for the procurement of 395 sheets of Sound Controlling Board under solicitation 47QSSC-26-Q-0266. The required materials must be new, open-cell polyimide foam faced panels (Type II, Class 2) measuring 48.0 by 24.0 by 1.5 inches, conforming to MIL-DTL-24688 Revision A Amendment 1 and QPL-24688. Delivery is required within the Continental United States to Norfolk, Virginia, and must comply with MIL-STD-129R marking and labeling standards, as well as GSAM provision 552.211-73. This is not a small business set-aside, though HUBZone price evaluation preferences apply. Award will be based on the Lowest Price Technically Acceptable (LPTA) mechanism. To be eligible, vendors must be registered for Purchase Orders via EDI or the OMS Vendor Portal and submit all technical specifications and completed administrative forms via email to kristi.riley@gsa.gov by October 19, 2026, at 5:00 PM EDT. Failure to complete all required administrative fields or provide technical specifications will result in the offer being excluded from further consideration.

Gsa/fas/gss/qscbd/assisted Contracting Branch B

POSTED

DEADLINE

Manufacture and Supply of MIL-PRF-6855F Nonmetallic TubingThis subcontract involves the manufacture and supply of nonmetallic tubing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the extrusion or molding of synthetic rubber tubing in strict accordance with MIL-PRF-6855F(1) and MIL-PRF-6855/4A(1) standards. The contractor is responsible for performing First Article Testing as specified in MIL-R-6855E Table VII and maintaining full compliance with QAP 16236. The final delivery consists of 183 feet of tubing, which must be accompanied by a First Article Testing report and detailed shelf-life documentation. All materials must be packaged according to MIL-STD-2073-1E and MIL-STD-129 guidelines. The project falls under NAICS code 326150 and is associated with performance activities located in New Cumberland.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

CUSHIONING MATERIAL

Solicitation # SPE8ED-27-T-0070

Solicitation SPE8ED-27-T-0070 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment Containers, for the procurement of two units of cushioning material (NSN 8135-01-280-2879). The contract requires delivery within 20 days after order, with shipping, inspection, and acceptance all occurring at the point of origin. Quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by October 19, 2026. The award process may be automated, and a price evaluation preference is available for certified HUBZone Small Business Concerns. The contractor must adhere to strict quality and security standards, including ISO 9001:2015 certification for the manufacturer's inspection system and compliance with CMMC Level 2 and NIST SP 800-171 for cybersecurity. Technical data associated with this item is subject to export control under ITAR or EAR regulations. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with specific requirements for shelf-life marking and hazardous material labeling per the Hazard Communication Standard. Additionally, the contract incorporates the Buy American and Balance of Payments Program, requiring disclosure for any non-domestic materials used.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Open Cell Foam Joint System Manufacturer/SupplierThis subcontract opportunity is for a manufacturer and supplier to provide a complete, integrated bridge joint system for prime contractors operating within the MoDOT St. Louis District. The scope of work involves the manufacture of cellular polyurethane foam impregnated with hydrophobic polymer and water-based emulsion, featuring a factory-applied fuel-resistant silicone coating. Additionally, the supplier is responsible for providing factory-fabricated watertight transition assemblies, ASTM C 881 epoxy adhesive primers, and ASTM D 5893 silicone sealant bands, with all components delivered directly to the designated MoDOT sites. The solicitation is categorized under NAICS code 326150 and was posted on October 6, 2026. Interested parties must submit their responses by the deadline of October 20, 2026, at 3:00 PM. This contract ensures that all critical materials for the bridge joint systems meet specific technical standards and are delivered as a comprehensive package to support infrastructure projects in Missouri.

MODOT ST LOUIS DISTRICT

POSTED

DEADLINE

Open Cell Foam Joint System

Solicitation # MODOT SL 0000000088SL

The Missouri Department of Transportation St. Louis District is soliciting bids for an Open Cell Foam Joint System under solicitation number MODOT SL 0000000088SL. The contract runs from the date of award through October 31, 2027, with options for two additional one-year extensions. The required system must be provided by a single manufacturer and consist of cellular polyurethane foam impregnated with 100 percent hydrophobic polymer and factory-coated with fuel-resistant silicone, field-applied epoxy adhesive primer meeting ASTM C 881, and field-applied silicone sealant bands meeting ASTM D 5893. The system must maintain a temperature service range of -40 to 185 degrees Fahrenheit and offer a working range of 50 percent in both tension and compression. Awards will be granted to the lowest and best bid that complies with all mandatory specifications and Missouri statutes, utilizing a multiattribute scoring method. Bidders must submit their proposals via the MissouriBUYS portal or as sealed hard copies by October 20, 2026. Key requirements include compliance with the Domestic Products Procurement Act, with a 10 percent preference for U.S.-manufactured goods, and adherence to nondiscrimination and drug-free workplace laws. All pricing must be FOB destination freight prepaid, including all packing and handling charges. Payments will be made in arrears, and the state reserves the right to use a state purchasing card for transactions.

MODOT ST LOUIS DISTRICT

POSTED

DEADLINE

SEAT-VL URETHANE — 4820000543850 — N0010426QNE45

Solicitation # N0010426QNE45

Solicitation NO0014-26-Q-NE45, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a total small business set-aside for the procurement of Seat-VL Urethane (NSN 4820-00-054-3850). The material is designated as Special Emphasis Level I Scope of Certification material because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. The seats must be manufactured from MD71-GG Mearthane (Graphite Filled Urethane) by Mearthane Products Inc. and must adhere to strict chemical and mechanical properties, including specific hardness, tensile strength, and water absorption limits. The contract requires a one-year warranty from the date of delivery and a 120-day delivery window with FOB destination terms. The contractor must maintain a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025. Rigorous traceability is mandatory, requiring each seat to be permanently marked per MIL-STD-792 to link the part to its specific heat, lot, or batch certification data. Key deliverables include a Certificate of Compliance and material certification test reports, which must be submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Packaging and marking must strictly follow MIL-STD-2073-1 and MIL-STD-129 standards.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Engine Inlet Bellmouth Housing FabricationThis subcontract involves the fabrication of the Engine Inlet Bellmouth Housing, Male (Part Number: 4106AS0275), supporting prime contractors for the Navy NAWC PMA-262/MQ-4C Program Office. The project requires the use of urethane or specialized foam molding processes to engineer components specifically for the AE3007H Turbofan Engine Inlet, utilizing molding equipment designed for aircraft maintenance specialized equipment. Managed by the Navair Warfare Ctr Aircraft Division under the Department of Defense, the work is performed in Lakehurst. The opportunity was posted on September 2, 2026, with a response deadline of November 1, 2026, and falls under NAICS code 326150.

Navair Warfare Ctr Aircraft Division

POSTED

about 1 month ago

DEADLINE

Engine Inlet Bellmouth Housing, Male

Solicitation # N68335-26-R-1113

The Naval Air Warfare Center Aircraft Division, specifically the PMA-262/MQ-4C Program Office, is issuing a sources-sought request for information under solicitation number N68335-26-R-1113. The agency is seeking industry feedback and comments regarding the capability to manufacture the Engine Inlet Bellmouth Housing, Male, identified as part number 4106AS0275. Production must align with the Navy Technical Data Package and 3D CAD data file 3673310M01110-11. If the requirement is eventually awarded, the Navy intends to provide the existing part mold as Government Furnished Equipment during the period of performance. This request is for information and planning purposes only and does not constitute a formal solicitation or a promise of a future award. Interested parties must provide administrative details, company experience, technical manufacturing information, and rough order of magnitude pricing and schedules for quantities of one, five to ten, and twenty or more units. The response deadline is November 1, 2026. The project falls under NAICS code 326150 and is associated with the Department of Defense, with the place of performance located in Lakehurst, New Jersey. Amendment 0001 was issued specifically to update the time zone in the RFI attachment.

Navair Warfare Ctr Aircraft Division

POSTED

about 1 month ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Freight Forwarding Services (California to Australia)This subcontract for Freight Forwarding Services involves providing transport and logistics management for prime contractors supporting DLA Weapons Support Land Supply Chain projects. The scope of work requires the management of international transit and customs clearance for supplies moving from a facility in California to the Joint Logistics Unit in Bandiana, Australia. The selected provider must ensure all shipments strictly adhere to DLA shipping and marking standards for international transit and guarantee delivery to the final destination. To be eligible, the contractor must hold authorized International Freight Forwarder status and maintain full compliance with both United States export laws and Australian import regulations. This opportunity falls under NAICS code 488510 and is associated with the Department of Defense. Interested parties should note the response deadline of October 26, 2026.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Supply of Coupling Clamps (NSN 5340-01-684-1596)This subcontract involves the manufacture or procurement of two certified specialized coupling clamps for prime contractors supporting the DLA Weapons Support Land Supply Chain. The components must strictly adhere to NSN 5340-01-684-1596 and Part Number AS5355/1-15B in compliance with AS5355 standards. All deliverables must meet RP001 packaging and MIL-STD-129 marking requirements to ensure proper handling and identification. The contract mandates strict adherence to the Buy American Act and the Berry Amendment regarding material sourcing. Additionally, the provider must maintain cybersecurity compliance in accordance with DFARS 252.204-7012. This opportunity falls under NAICS code 332999 and is managed by the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

DLA Compliant Packaging and Shipping ServicesThis subcontract for DLA Compliant Packaging and Shipping Services involves providing specialized military-grade packaging, labeling, and palletization for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires strict adherence to DLA standard RP001 for palletization and MIL-STD-129 for marking. Additionally, the contractor must apply hazardous material labeling in accordance with 29 CFR 1910.1200 using industrial labeling systems and MIL-SPEC packaging materials. The final deliverable is a fully packaged shipment prepared for FOB Origin transit to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488510 and is managed by the Department of Defense. Interested parties must respond by October 26, 2026.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Fabrication of Blank Panels (NSN 5340-01-619-9451)This subcontract involves the manufacture and supply of three precision blank panels for the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating the panels to match Part Number 12562458-01 and ensuring they meet the specifications for NSN 5340-01-619-9451. Production must be carried out using precision metal fabrication equipment and performed in New Cumberland. Compliance is mandatory regarding the DLA Master List of Technical and Quality Requirements (RA001) and DFARS 252.204-7012. The project falls under NAICS code 332312 and is managed under the Department of Defense. The response deadline for this requirement is October 26, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Oxygen Clean Packaging ProviderThis subcontract involves providing specialized packaging, sealing, and marking services for the DLA Weapons Support Land Supply Chain. The selected provider must utilize an oxygen-clean facility to process 30 O-rings, ensuring they are sealed in waterproof, greaseproof, and opaque bags according to MIL-DTL-117, Type II, Class C, Style 1 standards. The scope of work specifically requires the execution of IP042 oxygen clean packaging, MIL-STD-129 marking, and RP001 palletization in compliance with MIL-STD-2073-1E. The project is managed under NAICS code 488510 and will be performed in Tracy, California. Interested parties must submit their responses by October 26, 2026, to support prime contractors in meeting the rigorous Department of Defense specifications for these critical components.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

O-Ring Supplier (NSN 5331-01-718-7596)This subcontract involves the procurement of 30 specialized O-rings to support prime contractors for the Department of Defense under the DLA Weapons Support Land Supply Chain. The supplier is responsible for manufacturing or sourcing the components in strict accordance with NSN 5331-01-718-7596 and FSC 5330/5331 specifications. To ensure quality and environmental compliance, all materials must be UV-resistant, asbestos-free, and produced without the use of Class I ozone-depleting chemicals. The contract requires full adherence to the Buy American Act and the Berry Amendment. Once produced, the 30 O-rings must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Interested parties must respond by October 26, 2026, under NAICS code 326199.

All Other Plastics Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Fluid Filter Elements (NSN 2940004321761)This subcontract involves the procurement and supply of 556 Fleetguard Reservoir type filter elements, specifically Type A/S32M-13, to support prime contractors delivering DLA supply contracts for the M911 Commercial Heavy Equipment Transporter. The items must be provided according to manufacturer specifications and adhere to strict packaging and labeling standards, including ASTM D3951, RP001, and MIL-STD-129. Managed by the DLA Weapons Support Land Supply Chain under the Department of Defense, the contract requires full compliance with the Buy American Act and the Berry Amendment. The designated delivery terms are FOB Origin with the final destination being Hill AFB.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services supports the DLA Weapons Support Land Supply Chain. The scope of work involves providing specialized packaging and marking for prime contractors, specifically focusing on the preparation of brackets for delivery to DLA Distribution DDSP New Cumberland. All activities must strictly adhere to established military and federal standards, including RP001 for packaging, MIL-STD-129 for marking and labeling, and FED-STD-313 and TQ requirement IP0 for the handling of hazardous materials. The opportunity is categorized under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note that the response deadline is October 26, 2026. The final deliverables must be fully packaged, labeled, and prepared for shipment to the designated facility in New Cumberland, Pennsylvania.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Precision Fabrication of Mounting Brackets (NSN 5340-01-727-9810)This subcontract involves the precision fabrication of 10 custom mounting brackets for the DLA Weapons Support Land Supply Chain. The manufacturer must adhere strictly to NSN 5340-01-727-9810 and RA001 technical requirements, while ensuring full compliance with the Buy American Act and the Berry Amendment. Completed units are to be delivered FOB Origin to DLA Distribution DDSP in New Cumberland, Pennsylvania. To be eligible, the contractor must hold US/Canada Joint Certification Program certification for ITAR/EAR and have completed a CMMC Level 2 self-assessment. The project falls under NAICS code 332312 and is managed under the Department of Defense. Interested parties must respond by October 26, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 13 hours ago

DEADLINE

Defense-Standard Packaging and PalletizationThis subcontract for Defense-Standard Packaging and Palletization supports the DLA Weapons Support Land Supply Chain by providing military-grade packaging, marking, and palletization services for prime contractors. The scope of work requires the processing of 20 hardware units using MIL-SPEC preservation and cushioning materials. All deliverables must strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and requirement RP001 for palletization. The project involves FOB Origin shipment to DLA Distribution DDSP New Cumberland, located in New Cumberland. This opportunity falls under NAICS code 561910 and was posted by the Department of Defense. Interested parties must note the response deadline of October 26, 2026.

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Rigid Connecting Link FabricationThis subcontract involves the fabrication of 20 rigid connecting links for prime contractors supporting the DLA Weapons Support Land Supply Chain. The units must be manufactured according to Goodrich PN 252-266 and NSN 5340-01-722-1449 specifications, adhering strictly to the DLA Master List of Technical and Quality Requirements. The project requires the use of precision machining equipment capable of meeting aerospace tolerances. Additionally, all materials used in production must comply with the Buy American Act and the Berry Amendment. Performance for this contract is centered in New Cumberland, Pennsylvania.

POSTED

about 13 hours ago

DEADLINE

Product Verification Testing (PVT) ServicesThis subcontract for Product Verification Testing services supports prime contractors delivering to the DLA Weapons Support Land Supply Chain. The scope of work involves performing both destructive and non-destructive testing on Lever Assembly samples, strictly adhering to the requirements outlined in Procurement Note E05. The successful provider must deliver comprehensive PVT test reports and certified samples to ensure compliance with quality standards. Due to the technical nature of the requirements, the contractor must possess specialized material testing equipment and maintain active ITAR registration to access necessary technical data. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by October 30, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS