Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

O-RING

Active
SPE7M4-26-T-361YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of synthetic rubber O-rings, identified as commercial items and critical application hardware. The items must be manufactured by an accredited manufacturer listed on the PRI Qualified Manufacturer List or Qualified Products List and must adhere to the current revisions of MIL-DTL-25988/1B and SAE AMS-R-25988B. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplies. The total requirement consists of 1,220 units across two line items, with 420 units destined for DLA Distribution Depot Oklahoma and 800 units for DLA Distribution Depot Hill. Delivery is required within 14 days, with specific ship dates in September and January 2027. Packaging must comply with MIL-STD-2073-1E and RP001, specifically requiring medium duty, waterproof, greaseproof, opaque bags to protect the items from ultraviolet rays. Inspection and acceptance will occur at the destination.

General Info

Procurement of 1,220 synthetic rubber O-rings meeting MIL-DTL-25988/1B and SAE AMS-R-25988B standards.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE7M4-26-T-361Y.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SYNTHETIC RUBBER
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
SPE7M4-26-T-361Y
SECTION B
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRODUCT SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED MANUFACTURER (FOR COMPONENTS) AND/OR ASSEMBLED BY AN ACCREDITIED MANUFACTURER OR ACCREDITED ASSEMBLING DISTRIBUTOR (FOR ASSEMBLIES) AS LISTED IN THE PRI QUALIFIED MANUFACTURER LIST (QML)OR QUALIFIED PRODUCTS LIST (QPL) FOR THIS STANDARD. THE QML OR QPL IS AVAILABLE AT WWW.EAUDITNET.COM.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-25988/1B REVISION NR B DTD 06/29/2021 PART PIECE NUMBER: M25988/1-030
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS-R-25988B REVISION NR B DTD 06/01/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017777155 0001 EA 420.000
NSN/MATERIAL:5331003818930
DELIVERY (IN DAYS):0014
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
SPE7M4-26-T-361Y
SECTION B
PR: 7017777155 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/06/2027 Original Required Delivery Date:10/27/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017777155 0002 EA 800.000
NSN/MATERIAL:5331003818930
DELIVERY (IN DAYS):0014
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M4-26-T-361Y
SECTION B
PR: 7017777155 PRLI: 0002 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE7M4-26-T-361Y
SECTION B
PR: 7017777155 PRLI: 0002 CONT’D
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:09/15/2026 Original Required Delivery Date:10/27/2026
SPE7M4-26-T-361Y NSN/Part Number: 5331-00-381-8930 Quantity: 420 EA Purchase Request: 7017777155QTY: 1220 Delivery: 14 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
PIN, COTTER
Solicitation # SPE4A0-26-T-4443
This contract is for the procurement of one cotter pin, identified as a commercial item with NSN 5315-01-672-6011 and part number MS24665-705. The item must adhere to the technical and quality requirements specified in the DLA Master List, including specific packaging standards under ASTM D3951 and MIL-STD-129, and marking requirements per MIL-STD-130N. Sampling and inspection shall be conducted at the destination according to MIL-STD-1916 or ASQ H1331. The delivery is required within five days, with the original required delivery date set for August 4, 2026. The shipment is designated as FOB Origin and is destined for the USALRCTR Bavaria in Vilseck, Germany. This acquisition is managed by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-4443.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE, NONELECTRICAL
Solicitation # SPE8E4-26-T-2159
This contract is for the procurement of 394 feet of non-electrical, corrosion-resistant 18-8 round steel wire with a diameter of 0.188 inches. The material must be supplied in whole foot lengths between 8 and 16 feet. Key technical requirements include compliance with SAE AMS-S-7720B and ASTM A700 for preservation and packing. A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment and must be forwarded to the DLA Troop Support Contracting Officer. Strict marking and eligibility requirements apply, including continuous identification markings such as the DLA contract delivery order number, NSN, and manufacturer details. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. The delivery is set for FOB Origin with a quantity variance of plus or minus 10 percent, and the final product must be delivered to DLA Distribution San Joaquin in Tracy, California.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332618
New
DIBBS
PIN, SHOULDER, HEADLE
Solicitation # SPE4A6-26-T-21TC
This contract is for the procurement of 20 units of a shoulder pin for a headle, identified by NSN 5315-01-665-4166 and part number 571-0460-202-16141. This is a source-controlled critical application item that must be manufactured and tested according to specific limited rights data. Only vendors with existing access to this data or those who can provide traceability to approved sources are eligible to quote, and a Source Approval Request package is required for new applicants. The agreement specifies a delivery timeframe of 10 days after order, with shipping handled via the fastest traceable means to Fort Leonard Wood, Missouri. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements. The contract also incorporates various technical and quality requirements, including the removal of government identification from non-accepted supplies and strict configuration change management.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, SHOULDER, HEADLE
Solicitation # SPE4A6-26-T-15UL
Solicitation SPE4A6-26-T-15UL, issued by the Department of Defense ASC Commodities Division, is a request for the procurement of 20 headless shoulder pins. The items are identified as Commercial Off-The-Shelf (COTS) critical application items, specifically CFM International Inc part number 301-547-803-0 and NSN 5315011805719. The contract specifies a delivery timeframe of 114 days after receipt of order, with an original required delivery date of November 30, 2026, and a need ship date of December 13, 2026. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution Depot Oklahoma at Tinker AFB. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for source approval (RC001), packaging (RP001), and the removal of government identification from non-accepted supplies (RQ011). Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization must adhere to RP001. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Administrative requirements include the use of Wide Area WorkFlow (WAWF) for electronic invoicing and payment requests. The solicitation incorporates various FAR and DFARS clauses covering small business representations, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in about 7 hours
View Details
NAICS: 332618
New
DIBBS
WIRE, NONELECTRICAL
Solicitation # SPE8E4-26-T-2162
This contract is for the procurement of non-electrical music-grade carbon spring steel wire with a diameter of 0.036 inches and a length of 1,445 feet. The order consists of 18 coils delivered FOB Origin to DLA Distribution Cherry Point. The material is designated as a critical application item and must comply with ASTM A228/A228M and SAE AMS2806 standards. Strict compliance with the Qualified Suppliers List for Distributors (QSLD) is required for award eligibility. Suppliers must provide a Certificate of Quality Compliance with every shipment and adhere to detailed marking and packaging requirements per MIL-STD-129 and ASTM A700. All wire must be supplied in whole feet lengths, and specific identification markings, including the contract delivery order number and heat/lot numbers, must be applied via stamping, stenciling, or tags.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-21VK
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 34 headless straight pins under NSN 5315-01-453-8331. The contract requires delivery within 163 days after the order is placed and is managed under solicitation number SPE4A6-26-T-21VK. Performance is designated for Tracy, California, with the primary point of contact being Susan Barlow. The agreement is subject to rigorous technical and quality standards, including DLA packaging requirements, quality conformance inspections, and inspection and acceptance at origin. Notably, the contract involves the handling of covered defense information and requires compliance with CMMC Level 2 certification. Additionally, the technical data is subject to strict export controls under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and specific training to access the data.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-21ZM
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 100 units of straight headed pins, identified by NSN 5315-01-679-4857. The contract requires delivery within 158 days after receipt of order and specifies that the place of performance is in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and quality standards, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract contains stringent export control regulations under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to handle technical data.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, SHOULDER, HEADED
Solicitation # SPE4A7-26-T-686L
This solicitation, numbered SPE4A7-26-T-686L, is for the procurement of 120 units of headed shoulder pins under NSN 5315-13-118-8953. The contract requires delivery within 84 days after order and is managed by the Department of Defense ASC Supplier Oper AE and AF Div. Key compliance requirements include DLA packaging standards, cybersecurity maturity model certification level 2 self-assessment, and strict adherence to covered defense information protocols. Because this is a restricted source item, it requires engineering source approval by the government design control activity. Alternate offerors must provide comprehensive documentation, including detailed drawings, process sheets, and identification of critical process sources. Quality assurance is governed by specific sampling methods such as MIL-STD-1916 or ASQ H1331, and a shock extension report per MIL-S-901 is required. If original equipment manufacturer drawings are unavailable, the offeror must submit a detailed engineering analysis report or a full reverse engineering procedure.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADED
Solicitation # SPE4A6-26-T-22AL
This contract is for the procurement of five headed, grooved pins, identified as a critical application item with NSN 5315-01-720-9287 and Sig Sauer Inc part number 4600569NG. This is a source-controlled item that must be manufactured and tested according to specific limited rights data. Vendors must have access to this data or provide traceability to approved sources, and a source approval request package is required for those seeking approval. The agreement specifies a delivery timeframe of 130 days, with a need ship date of January 10, 2027, and an original required delivery date of April 8, 2027. Inspection and acceptance occur at the origin, and the items must adhere to strict sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, with delivery directed to the DLA Distribution New Cumberland facility in Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-21VR
This solicitation, identified as SPE4A6-26-T-21VR, is for the procurement of two quick release pins under NSN 5315-01-719-3466. The contract is issued by the Department of Defense through the ASC Commodities Division, with a required delivery timeframe of 20 days after order. Performance is designated for Camp Pendleton, California. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and physical item marking. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, emphasizing zero non-conformance for acceptance. Additionally, the contract requires CMMC Level 2 certification and strict compliance with ITAR and EAR export controls, limiting the distribution of technical data to approved contractors with US/Canada Joint Certification Program certification.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
Federal
Space Guard Beast Wire Mesh Guarding System Security Cages
Solicitation # W91ZLK26QA018
The Army Contracting Command-Aberdeen Proving Ground is soliciting quotes for Space Guard Beast Wire Mesh Guarding System Security Cages or an equal alternative to secure high-value laboratory equipment. This procurement is a 100 percent Total Small Business Set-Aside under NAICS code 332618. The government intends to award a single Firm-Fixed-Price contract to the Lowest Priced Technically Acceptable offeror who meets all specifications detailed in the Purchase Description. Interested vendors must be registered in the System for Award Management and submit their signed and dated proposals via email by August 26, 2026, at 12:00 PM ET. Proposals must include the company name, point of contact, and CAGE code, with the subject line referencing solicitation number W91ZLK-26-Q-A018. All technical questions must be submitted by August 24, 2026, at 1:00 PM ET.
W6QK Acc-Apg Director

POSTED

about 22 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332618
New
DIBBS
Synopsis For Multi Leg Sling 3940-01-541-0894
Solicitation # SPE8EG-26-Q-0007
The contract solicitation SPE8EG-26-Q-0007 seeks the procurement of 2,000 units of SLING, MULTIPLE LEG (NSN 3940-01-541-0894), with optional quantities of 1,000 and 2,000 additional units, to be delivered within 220 days after award. This is a fixed-price, total small business set-aside solicitation evaluated under the Lowest Price Technically Acceptable (LPTA) methodology, where technical acceptability is a threshold requirement and cost determines award. The contractor must comply with stringent cybersecurity mandates, including CMMC Level 2 certification and implementation of NIST SP 800-171 controls to safeguard Controlled Unclassified Information and Federal Contract Information, with mandatory compliance reporting through the Supplier Performance Risk System. Technical and quality requirements are governed by MIL-STD-130N for unique item identification, MIL-STD-129 for shipment marking, and MIL-STD-2073-1E for packaging, including adherence to DLA-specific packaging codes and preservation standards. The contractor is responsible for ensuring all items are marked with machine-readable UIDs, free of unauthorized mercury or mercury compounds except for specified functional exceptions, and must coordinate with NSWC IHD DET PICA to obtain serial numbers prior to delivery. Inspection occurs at origin for all items, while acceptance is at destination, with the Government conducting first article and production lot testing at its designated facilities. Export-controlled technical data subject to ITAR or EAR is involved, requiring vendor compliance with DLA’s Joint Certification Program, specialized training, and strict handling protocols. Invoicing must be conducted exclusively through WAWF using electronic document types specified by regulation. The contract includes option clauses for increased quantities and requires strict adherence to subcontracting limitations, with no more than 50% of work allowable to subcontractors in certain cases. Compliance with whistleblower protections, labor standards, anti-human trafficking measures, and prohibitions on certain foreign-made technologies and software is mandatory. All proposals must be submitted electronically via DIBBS by August 20, 2026, and failure to meet any technical, quality, or regulatory requirement will result in rejection, with award made solely to the lowest-priced acceptable offer.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK DI
Solicitation # SPE7M3-26-T-8588
Solicitation SPE7M3-26-T-8588 is a federal request from the Department of Defense Fluid Handling Division for seven units of a Quick Disconnect Coupling Half, identified by NSN 4730-00-729-5736. The delivery requirement is 160 days after order, with a response deadline of September 4, 2026. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must disclose any non-domestic materials to comply with the Berry Amendment and Buy American Act. The contract prohibits the use of covered telecommunications equipment and additive manufacturing unless specifically authorized. All contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Small business joint ventures must provide specific representations and certifications, and those unable to quote by the deadline should submit a No Bid response with an anticipated quote date to avoid requirement cancellation.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-364G
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 69 O-rings under NSN 5331-01-350-3175. The contract requires delivery within 150 days after receipt of the order and specifies that all items must be free of asbestos. Performance is centered in Tracy, California, with the response deadline set for September 4, 2026. The procurement is subject to several technical and quality requirements, including DLA packaging standards and special oxygen cleaning and packaging in accordance with MIL-STD-1330. Additionally, the contract mandates inspection and acceptance at the origin and incorporates guidelines for configuration change management and the handling of covered defense information.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
COUPLING, SHAFT, FLEXIBL
Solicitation # SPE7M4-26-T-362Z
This contract is for the procurement of 11 flexible shaft couplings, identified by NSN 3010-01-046-1953. These critical application items feature a bonded rubber design with an overall length of 4.125 inches and an outside diameter of 4.625 inches. The couplings include specific bore diameters and keyway dimensions for both ends, with the first end measuring 1.3750 inches and the second end measuring 0.8750 inches. Approved part numbers include General Electric 1405M66P01 and Emerson Power Transmission 2297836 or 30EEFB. The agreement specifies a delivery timeframe of 164 days, with a required delivery date of November 17, 2026, and a need ship date of February 16, 2027. Shipping is FOB Origin with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. Compliance is required for DLA packaging standards, MIL-STD-129 marking, and strict prohibitions against the intentional addition of mercury or mercury-containing compounds.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, TUBE TO BOSS
Solicitation # SPE7M3-26-T-8570
This contract is for the procurement of 1,945 steel tube-to-boss elbows featuring a zinc chromate finish and a 90-degree flow angle. The components transition from a 1/2 inch nominal OD tube size to a 3/8 inch nominal OD tube size and are classified as critical application items. Technical specifications are governed by SAE J1453-3 and SAE J1453-1-2012 standards. Due to the inclusion of O-rings, the items have a non-extendable shelf life of 180 months. The agreement specifies that inspection and acceptance will occur at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Delivery is required within 168 days, with a need ship date of February 16, 2027, and a final required delivery date of March 23, 2027, to DLA Distribution San Joaquin in Tracy, California.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 326122
New
DIBBS
ADAPTER, STRAIGHT, TU
Solicitation # SPE7M3-26-T-8585
This contract is a solicitation for the procurement of 21 straight tube adapters, identified by NSN 4730-01-583-7271. The items must be manufactured by an accredited manufacturer or assembled by an accredited distributor listed in the PRI Qualified Manufacturer List or Qualified Products List. Technical specifications are governed by SAE AS1037H and SAE AS4841D, and the contract strictly prohibits the use of Class I ozone depleting chemicals. The delivery is set for 164 days after order, with a required delivery date of March 10, 2027, to the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Inspection and acceptance will take place at the destination, and the shipment is designated as FOB Origin.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE7M4-26-T-364B
This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of 21 machine screws under NSN 5305014080413. The requirement specifies part number 1647715-8 from Mission Systems Davenport Inc. Delivery is required within 164 days, with a need ship date of February 16, 2027, and an original required delivery date of May 11, 2027. The items are to be delivered FOB Origin and will undergo inspection and acceptance at the destination. The supplier must adhere to strict packaging and labeling standards, including ASTM D3951 and MIL-STD-129, while following DLA packaging requirements for procurement. All technical and quality requirements are governed by the DLA Master List. Shipments are to be directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The solicitation is identified by number SPE7M4-26-T-364B and falls under NAICS code 332722.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M4-26-T-363L
This contract is for the procurement of 193 fluid filter elements under solicitation SPE7M4-26-T-363L, identified by NSN 2940014798459. The requirement is set aside for Service-Disabled Veteran-Owned Small Businesses and specifies parts from Pacific Consolidated Industries LLC or Brighton Cromwell LLC. Delivery is required within 127 days, with a need ship date of January 10, 2027, and a final delivery destination at DLA Distribution Depot Hill in Utah. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Environmental restrictions are in place prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The items are designated as critical application items, and inspection and acceptance will occur at the destination.
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-363T
Solicitation SPE7M4-26-T-363T is a federal request from the Department of Defense Fluid Handling Division for 11 units of a non-metallic hose assembly, identified by NSN 4720-01-008-7036. The delivery requirement is 186 days after receipt of order, with a response deadline of September 4, 2026. Offerors must provide manufacturer CAGE codes and source details, and are encouraged to submit quantity ranges to accommodate potential demand volatility. Compliance requirements include strict adherence to domestic material restrictions such as the Berry Amendment and the Buy American Act, as well as a representation that no covered telecommunications equipment will be provided. Small business joint ventures must submit specific representations and certifications. Additionally, all contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized by the contracting officer.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
SLEEVE, FLARED, TUBE FIT
Solicitation # SPE7M4-26-T-363J
This contract is for the procurement of steel flared tube fitting sleeves with a .312 inch nominal tube size, conforming to SAE aerospace standards for 37 degree flared fluid connections. The items are designated as commercial products and must be produced by an accredited manufacturer or distributor listed on the PRI Qualified Manufacturer List or Qualified Products List. The contract prohibits the use of Class I ozone depleting chemicals and requires adherence to specific sampling methods, such as MIL-STD-1916 or ASQ H1331, with zero-based sampling plans for acceptance. The requirement consists of two line items totaling 531 units under NSN 4730-00-433-33375, with delivery specified as 189 days after order. Shipping is FOB Origin with inspection and acceptance occurring at the destination. Deliveries are split between DLA Distribution Depot Oklahoma at Tinker AFB and the DDSP New Cumberland Facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, FUEL PRE
Solicitation # SPE7M4-26-Q-0982
This contract is for the procurement of three fuel pressure tube assemblies, identified by NSN 4710-01-125-2833 and part number 74A586734-1003. The item is designated as a critical application item associated with The Boeing Company and Northrop Grumman Systems Corporation. The agreement is established as a firm fixed price contract with a delivery timeline of 273 days after order. The supplier must adhere to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling, with DLA master list requirements taking precedence. Government furnished property tooling located at AMARG may be required to support production. Inspection and acceptance will occur at the destination, with shipments directed to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
PLUG, ROTARY, VALVE
Solicitation # SPE7M4-26-T-361U
This contract is a solicitation for the procurement of 14 rotary valve plugs, identified by NSN 4820013151045 and associated with Leslie Controls part numbers 24573N and N695300058. The order is managed by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-361U. Delivery is required within 140 days, with a specified need ship date of January 19, 2027, and a final required delivery date of December 4, 2028. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a critical prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Quality and technical requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333618
New
DIBBS
PARTS KIT, ENGINE FU
Solicitation # SPE7M4-26-T-327L
The contract is for a Parts Kit, Engine Fuel Fuel Pump with NSN 2910-00-355-7669, quantity of 190 units, under solicitation SPE7M4-26-T-327L, issued by the Defense Logistics Agency’s Fluid Handling Division as a Total Small Business Set-Aside under NAICS code 333618. Delivery is required within 191 days of order placement, with an original delivery date of April 6, 2027, and a need-to-ship date of February 28, 2027. Items are to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with no variance allowed in quantity. The unit price is $190.00 per unit, totaling $36,100, paid via Wide Area WorkFlow using an Invoice and Receiving Report for this fixed-price supply contract. The kit involves casting or forging components, and if the contractor lacks required tooling, they must contact DLA for assistance. Packaging and preservation must strictly comply with MIL-STD-2073-1E Appendix D for kits, with all marking, labeling, and barcoding per MIL-STD-129, including no special marking designation. Palletization must follow DLA’s RP001 packaging requirements. The contractor must implement cybersecurity measures per CMMC Level 2 Self-Assessment and safeguard covered defense information as required by DFARS 252.204-7012, along with compliance to NIST SP 800-171 through a DoD assessment. The contract includes clauses prohibiting hexavalent chromium, ensuring hazardous material handling per OSHA, prohibiting covered telecommunications equipment, and enforcing whistleblower rights, employment eligibility verification, combating trafficking, and equal opportunity for workers with disabilities. Offerors must be registered in SAM with a valid UEI and CAGE code, certify as a small business, and provide affirmations regarding subcontracting and cyber compliance. All proposals must be submitted electronically through DIBBS by August 20, 2026, with no physical submissions accepted. Inspection and acceptance occur at the delivery point, and the contractor assumes full responsibility for compliance with all technical, quality, and regulatory requirements referenced in the DLA Master List of Technical and Quality Requirements.
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 7 hours
View Details