Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

O-RING

Active
SPE7L3-26-T-225MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of three O-rings, identified by NSN 5331-01-521-3766 and Parker Hannifin part number 801929. The order requires delivery within five days ADO, with shipping handled via the fastest traceable means to designated locations in San Diego and National City, California. Inspection and acceptance will occur at the destination. The supplier must adhere to strict material and packaging standards, specifically prohibiting the intentional addition of mercury or mercury-containing compounds except where functionally required. Due to the risk of ultraviolet degradation, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. All packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements.

General Info

Procurement of three O-rings for delivery to San Diego and National City, California.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

3755 BRINSER ST STE 1, SAN DIEGO, CA, 92136-5299, USA

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-225M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUSA
Contacts
LEE MILLER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
This item has been approved by the Packaging Supervisor/ Packaging Lead to manually exclude from the First Destination Packaging (FDP) Program.
These items are not candidates for Standard Commercial Packaging.
PARKER HANNIFIN CORPORATION 84561 P/N 801929
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7L3-26-T-225M
SECTION B
PR: 7017895743 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017895743 0001 EA 3.000
NSN/MATERIAL:5331015213766
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
PRES MTHD:33 CLNG/DRY: PRESV MAT:
WRAP MAT: CUSH/DUNN MAT: CUSH/DUNN THKNESS:
UNIT CONT:BV OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N36128
SWRMC MAC-MO
COMMANDING OFFICER
3755 BRINSER ST STE 1
SAN DIEGO CA 92136-5299
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N36128
SWRMC MAC-MO SHIPPING/RECEIVING
U. S. NAVAL STATION
401 W 8TH ST GATE38 BLDG3155 BAY20
NATIONAL CITY CA 91950
US
M/F: (TCN) N552626210L080
RDD:
PROJ: 6FB TP 1
SUPP ADD: N36128 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: 2L FC: F3
Need Ship Date:00/00/0000 Original Required Delivery Date:08/14/2026
SPE7L3-26-T-225M NSN/Part Number: 5331-01-521-3766 Quantity: 3 EA Purchase Request: 7017895743QTY: 3 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE4A6-26-T-26LQ
This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of two units of preformed packing under part number 5330-01-043-1258. The contract requires delivery within 482 days after receipt of the order. It mandates strict adherence to DLA technical and quality requirements, including specific packaging standards, configuration change management, and the use of approved sampling methods such as MIL-STD-1916 or ASQ H1331. The agreement includes critical safety and security mandates, such as the application of Covered Defense Information and CMMC Level 2 self-assessment. It strictly prohibits the use of asbestos and the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components like batteries or sensors. While Item Unique Identification is not required by the service customer, the contractor must comply with all specified measuring, test equipment, and source approval documentation requirements.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-114P
This contract specifies the procurement of a gasket with NSN 5330-01-439-4956 and part number 3079B, totaling 715 units to be delivered within 99 days under Solicitation SPE7L3-26-T-114P. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-approved chemical reagents. Portable devices containing mercury must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. The use of ozone-depleting chemicals is strictly prohibited, and no asbestos as defined by FED-STD-313 is allowed. The gasket is designated as a critical application item and must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking required. Packaging must also adhere to DLA’s packaging requirements and be palletized appropriately. Delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The sole delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of May 21, 2026, and the original required delivery date of November 13, 2026. Unit pricing and total value are specified, and compliance with all regulatory, environmental, and safety standards is mandatory.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE4A5-26-Q-0728
This contract is a firm fixed price solicitation for 40 plain seals, identified by NSN 5330-01-535-9908. Due to warranty and guarantee requirements for the F138 Engine under the C-5 RERP Program, this is a single-source acquisition restricted to GE Engine Services Distribution, LLC. The delivery timeline is set for 171 days after the order is received, with the destination and acceptance point located at DLA Distribution Warner Robins in Georgia. The procurement includes strict technical and quality mandates, including CMMC Level 2 self-assessment and the protection of covered defense information. Because the items are susceptible to ultraviolet ray deterioration, they must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. All packaging and marking must adhere to MIL-STD-129 and DLA packaging requirements, while item unique identification is not required.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
PACKING ASSEMBLY
Solicitation # SPE7L3-26-U-0734
This solicitation, identified as SPE7L3-26-U-0734, is issued by the Department of Defense Land Supplier Opns Vehicle Spt for the procurement of 27 packing assemblies under NSN 5330-01-352-1203. The contract is a total small business set-aside under NAICS code 339991, with a required delivery timeframe of 97 days after the order is placed. The agreement mandates strict adherence to DLA technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. It prohibits the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components, and strictly forbids the use of asbestos in all supplied items.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-159A
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 33 units of preformed packing under part number 5330-01-652-7618. The contract requires delivery within 168 days after receipt of order and is categorized under NAICS code 339991. Performance is to take place in New Cumberland, Pennsylvania. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification, complete specific DOD export-control training, and be approved by the DLA controlling authority.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
CAP, PROTECTIVE, DUST
Solicitation # SPE7M4-26-Q-1018
This solicitation, issued by the Department of Defense Fluid Handling Division under number SPE7M4-26-Q-1018, is for the procurement of 424 protective dust and moisture seal caps, identified by NSN 5340-00-208-2195. The item is classified as a commercial product and must adhere to specific technical and quality requirements, including DLA packaging standards and MIL-STD-130N for identification marking. Critical item source inspection is required for this procurement. The contract mandates strict environmental compliance, specifically prohibiting the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components like batteries or sensors. Additionally, the item must not utilize Class I ozone depleting substances. Performance is centered in Jacksonville, and responses are due by September 10, 2026.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE4A6-26-T-26HW
This contract is for the procurement of one gasket, identified by NSN 5330-01-381-2551 and Northrop Grumman part number 156C604H01. The item is classified as a commercial product and must be delivered within 20 days. Delivery is FOB Origin, with inspection and acceptance occurring at the destination. The shipment is destined for the US Army in Hohenfels, Germany, and must be sent via the fastest traceable means, excluding parcel post. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and RP001. Because the item is subject to deterioration from ultraviolet rays, it must be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the supplier must ensure that no mercury or mercury-containing compounds are intentionally added to the hardware.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUND
Solicitation # SPE7L3-26-T-224L
This solicitation is for the procurement of 46 spiral wound gaskets, identified by part number M24716TYI53711-5787605-210 and NSN 5330-01-400-2797. The contract is issued by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with a delivery requirement of 154 days after receipt of order. Performance is located in Tracy, California, and the solicitation is managed by Susan Diamond. The supplier must adhere to strict technical and quality standards, including DLA packaging requirements and MIL-STD-130N for identification marking. Critical material restrictions are in place, explicitly prohibiting the intentional addition of mercury or mercury-containing compounds and requiring all supplied items to be completely free of asbestos. Compliance with the DLA Master List of Technical and Quality Requirements and FAR 52.246-15 certificate of conformance procedures is mandatory.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L3-26-T-224W
This solicitation is for the procurement of one plain seal, identified by National Stock Number 5330-01-695-2928, for the Department of Defense Land Supplier Operations Vehicle Support. The contract requires delivery within 20 days after the order is placed. The item must be completely free of asbestos, and any alternative materials must be approved according to specific contractual clauses. The supplier must adhere to technical and quality requirements RA001, RP001, and RQ011, which include the removal of government identification from non-accepted supplies and specific DLA packaging standards. Because the item falls under federal supply classifications susceptible to ultraviolet degradation, it must be packaged in a medium duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117 specifications. These requirements apply to all delivery methods, including direct vendor delivery and foreign military sales.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE4A5-26-T-405H
This solicitation, issued by the Department of Defense ASC Supplier OEM Division, is for the procurement of five O-rings under National Stock Number 5331-00-252-6045. The contract requires delivery within five days after the order is placed. The procurement is governed by NAICS code 339991 and is managed by primary point of contact Patrick Oconnor. The supplier must adhere to specific technical and quality requirements as outlined in the DLA Master List, including strict packaging standards and the removal of government identification from non-accepted supplies. Additionally, the contract mandates that all items be free of asbestos and prohibits the use of Class I ozone-depleting chemicals, requiring any substitute chemicals to be submitted for official approval.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
RETAINER SLEEVE, SEA
Solicitation # SPE7L3-26-T-096Y
The contract pertains to the procurement of a retainer sleeve, sea, identified by NSN/Part Number 5330-01-676-6586, with a quantity of one unit requested under Purchase Request 7017351463. The solicitation, issued under number SPE7L3-26-T-096Y, was posted on July 1, 2026, and responses are due by July 13, 2026. This is a federal solicitation managed by the Defense Logistics Agency under the Department of Defense, with no set-aside designation specified. The performance location and point of contact details are not provided, and the contract is conducted under a U.S. federal procurement framework. Interested parties can access the full solicitation through the DIBBS website using the provided UI link.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-06Y7
This solicitation, number SPE7L1-26-T-06Y7, is issued by the Department of Defense Land Supply Chain for the procurement of 314 O-rings under NSN 5331-01-433-5391. The contract requires delivery within 154 days after order and specifies that the items be delivered to Tracy, ZIP 95304-5000. The procurement is governed by NAICS code 339991 and incorporates specific technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Strict material prohibitions are in place, forbidding the use of Class I ozone-depleting chemicals, asbestos, and the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The manufacturing process identifies a metal casting method, which requires specific tooling. Contractors are directed to coordinate with the appropriate Aviation or Land and Maritime supply chain assistance teams for sourcing and tooling information.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE7L3-26-T-224R
This contract is a solicitation for the procurement of one wiring harness, identified by NSN 6150-01-658-5196 and Oshkosh Defense part number 4302142. The order is issued by the Department of Defense under solicitation number SPE7L3-26-T-224R with a required delivery date of August 27, 2026. Delivery is required within 20 days after order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The item must be delivered to the Distribution Management Office in Twentynine Palms, California. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, and shipments must be sent via traceable means rather than parcel post. The contract specifies a zero percent quantity variance and requires palletization in accordance with DLA procurement requirements.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
HUB, WHEEL, VEHICULAR
Solicitation # SPE7L3-26-T-224U
This contract, identified by solicitation number SPE7L3-26-T-224U, is a small business set-aside for the procurement of 26 vehicular wheel hubs under National Stock Number 2530-01-588-3866. The requirement specifies critical application items, specifically referencing Timken Corporation and Meritor Heavy Vehicle Systems parts. The delivery is scheduled for approximately 102 days after award, with a target need date of March 17, 2026, and a destination for shipment at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement incorporates strict technical and quality requirements managed through the DLA Master List. Suppliers are prohibited from using Class I ozone-depleting chemicals in any delivered items, and any necessary substitutes must receive prior approval. Packaging must adhere to specific standards, including MIL-STD-129 for marking and labeling, and must comply with FED-STD-313 or ASTM D3951 depending on whether the material is classified as hazardous. All items are subject to inspection and acceptance at the destination, with terms set for FOB Origin.
Other Motor Vehicle Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L3-26-T-224B
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 16 units of structural frames under part number 2510-01-678-1687. The contract requires delivery within 260 days after order and is managed under NAICS code 332999. Performance is designated for Bremerton, Washington, with the primary point of contact being Matthew Curry. Compliance requirements are stringent, including CMMC Level 2 certification for third-party assessment and adherence to DLA master technical and quality requirements. The contract strictly prohibits the use of Class I ozone-depleting chemicals and mandates specific DLA packaging and government identification removal protocols. Furthermore, the project involves technical data subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized handling training to access restricted data.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326291
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L3-26-T-224K
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 74 plain encased seals, identified by NSN 5330-01-112-1527 and part number 3039000 from Cummins Inc. The contract requires that the items contain no asbestos as defined by FED-STD-313 and mandates a delivery timeframe of 5 days after the order is placed. The procurement is subject to DLA packaging requirements and specific technical and quality standards outlined in the DLA Master List. Additionally, the contract includes a requirement for the removal of government identification from any supplies that are not accepted. The place of performance is located in Texarkana, Texas, and the solicitation is categorized under NAICS code 326291.
Rubber Product Manufacturing for Mechanical Use

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7L3-26-T-224Z
This contract is for the procurement of five cable assemblies, identified by NSN 5995-01-676-8254 and part number FMA111415JK-1 from Winchester Interconnect CM CA, Inc. The agreement specifies a delivery timeframe of 20 days after receipt of order, with a required delivery date of August 27, 2026. Shipping is set as FOB Origin and must be delivered to the distribution point at Fort Irwin, California, using the fastest traceable means. The contract mandates strict adherence to DLA packaging requirements and military specifications, specifically MIL-STD-2073-1E for delivery preparation, MIL-STD-129 for marking, and MIL-DTL-12000 for preservation of cables, cords, and wires. Additionally, the supplier is prohibited from using Class I ozone-depleting chemicals in the production of these items. Inspection and acceptance will take place at the destination.
Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7L3-26-T-225N
This contract is a solicitation for the procurement of one knob, identified by NSN 5355006872713 and Lockheed Martin part number 8415200-501. The agreement is managed by the Department of Defense under the Land Supplier Operations Vehicle Support agency, with a required delivery date of June 10, 2026, and a delivery timeframe of five days after the order. The shipment is to be delivered FOB Origin to the Air Force Supply Control Receiving facility at Robins AFB, Georgia, using the fastest traceable means. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. It explicitly prohibits the use of Class I ozone-depleting chemicals in the production of the item. Quality control measures include destination inspection and acceptance, with a zero percent quantity variance allowed. Documentation for source approval and specific labeling requirements are mandatory for compliance.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
PUMP, FUEL, ELECTRICAL
Solicitation # SPE7L3-26-T-224J
This contract, identified as SPE7L3-26-T-224J, is for the procurement of one electrical fuel pump, part number 4941173 from Cummins Inc, under NSN 2910-01-595-9022. The delivery is required within five days after order, with a required delivery date of September 8, 2026. The shipment is destined for HQ HSC ASG Kuwait at Camp Arifjan, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, specifically citing ASTM D3951 and MIL-STD-129 for marking and labeling. Technical and quality requirements are governed by the DLA Master List, and the contract includes a specific provision for the removal of government identification from non-accepted supplies. The procurement is managed by the Department of Defense Land Supplier Operations Vehicle Support.
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details