Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

O-RING

Active
SPE7L1-26-T-07T6Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation for the procurement of one O-ring, identified by NSN 5331-01-670-1078 and part number 391 2882 499 from Eaton Corp Fluid Power Opns. The order is managed under purchase request 7018203990 with a required delivery date of September 4, 2026, and a delivery timeframe of five days after order. Shipping is FOB Origin and the destination for inspection and acceptance is Fort Bragg, North Carolina. The agreement mandates strict adherence to DLA technical and quality requirements, specifically referencing RA001, RP001, and RQ011. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 to protect the item from ultraviolet rays using waterproof, greaseproof, opaque bags. Marking must follow MIL-STD-129, including a specific instruction not to bend the item. Hazardous materials shipping must comply with IP025, and the shipment must be sent via the fastest traceable means.

General Info

Procurement of one Eaton O-ring for delivery to Fort Bragg by September 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

2530 TAYLOR STREET BLDG NUMBER 2530, FORT BRAGG, NC, 28310, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-07T6 RFQ

PDF•18 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
CHELSEA CUNNINGHAM
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
EATON CORP FLUID POWER OPNS 19954 P/N 391 2882 499
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018203990 0001 EA 1.000
NSN/MATERIAL:5331016701078
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:HB CUSH/DUNN THKNESS:A
UNIT CONT:BE OPI:M
SPE7L1-26-T-07T6
SECTION B
PR: 7018203990 PRLI: 0001 CONT’D
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:20 -20 Do not bend
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
BULK BREAK POINT:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
MARKFOR
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
M/F: (TCN) W8002S62440402
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
SPE7L1-26-T-07T6
SECTION B
PR: 7018203990 PRLI: 0001 CONT’D
Need Ship Date:00/00/0000 Original Required Delivery Date:09/04/2026
SPE7L1-26-T-07T6 NSN/Part Number: 5331-01-670-1078 Quantity: 1 EA Purchase Request: 7018203990QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
ADJUSTING DEVICE, BE
Solicitation # SPE7L5-26-T-5327
Contract SPE7L5-26-T-5327 is a solicitation issued by the Department of Defense Land Supplier Operations Engines for the procurement of 45 units of a belt-chain tension adjusting device, identified by NSN 2920-41-003-1054. This item is classified as a Commercial Off The Shelf critical application item, with associated part number 2205423-0 from Laborde Products, LLC and Steyr Motors Australia. The contract specifies a delivery timeframe of 147 days after order, with an original required delivery date of November 19, 2026, and a need ship date of February 16, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement incorporates strict technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. It prohibits the use of Class I ozone depleting chemicals and restricts the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking is required. The solicitation falls under NAICS code 336310 and adheres to the DLA Master List of Technical and Quality Requirements, including provisions for covered defense information.
LAND SUPPLIER OPNS ENGINES

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
Federal
EXILF21 Integrated Battery Pack Supplier
FA5270 18 Cons Pk

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336310
New
Federal
29--FILTER ELEMENT,FLUID
Solicitation # SPE7L326U0742
DLA Land and Maritime is soliciting quotes for the procurement of 145 fluid filter elements under NSN 2910015900735. This is a small business set-aside opportunity under NAICS code 336310, with a delivery requirement of 74 days after the order is received. The procurement may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate total of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 21 units and an estimated 12 orders per year, with shipments destined for various CONUS and OCONUS DLA depots. The approved source for this item is 15852 4209901. Interested parties must submit their quotes electronically by the deadline of September 22, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled through the provided electronic channels.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
Federal
29--ACTUATOR,ELECTRO-MECHA
Solicitation # SPE7L326U0744
DLA Land and Maritime is soliciting quotes for the procurement of 52 electro-mechanical actuators under NSN 2910016265028. This small business set-aside opportunity, identified by solicitation number SPE7L326U0744, may result in an automated Indefinite Delivery Contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 7 units, with an estimated two orders per year. Items must be delivered to various CONUS and OCONUS DLA Depots within 74 days after the order is placed. The approved source for this requirement is 5DR61 9534. Interested parties must submit their quotes electronically by the deadline of September 22, 2026, as hard copies of the solicitation and technical drawings are not available.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
Federal
29--SENSOR,EXHAUST GAS,
Solicitation # SPE4A526T406Y
DLA Aviation is soliciting quotes for the procurement of two exhaust gas sensors under NSN 2990015286145. This requirement, identified by solicitation number SPE4A526T406Y, specifies a delivery timeline of 137 days after the order is received, with shipments directed to DLA Distribution W1A8. The procurement falls under NAICS code 336310 and is managed by the Department of Defense office located in Richmond, Virginia. Eligible sources may submit electronic quotes by the deadline of September 15, 2026. The contract identifies several approved sources, including 062W0, 07482, 1B6R3, and 97424. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled electronically through the provided procurement channels.
DLA Aviation

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
Federal
29--PUMP,FUEL,METERING AND
Solicitation # SPE7L426U1227
This procurement solicitation, issued by DLA Land and Maritime under solicitation number SPE7L426U1227, is for the acquisition of 121 fuel metering pumps, identified by NSN 2910015707447. The contract is structured as a Small Business Set Aside and may result in an Automated Indefinite Delivery Contract with a one-year term or a total value ceiling of 350,000.00. There is a guaranteed minimum quantity of 18 units, with an estimated two orders per year. Delivery is required within 126 days after receipt of order to various CONUS and OCONUS DLA Depots. Approved sources for this requirement include 11083 and 1EFH8. This is a request for quote that must be submitted electronically by the deadline of September 22, 2026. No hard copies of the solicitation or technical drawings are available, and all interested responsible sources are encouraged to submit their quotes via the provided electronic links.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
Federal
GOVERNOR,DIESEL ENG
Solicitation # N0010426QJA95
This solicitation is for the repair of a diesel engine governor, with an offer due date of September 9, 2026. The government requires a Repair Turnaround Time of 110 days, measured from the physical receipt of the asset to final government acceptance. Failure to meet this timeline will result in a per-unit, per-month price reduction, the amount of which must be specified by the contractor in their quote. Key requirements include Government Source Inspection and adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. The contract is issued as a bilateral agreement requiring the contractor's signed acceptance. Additionally, the government may exercise an option to increase the quantity of supplies at the specified unit price. Only authorized distributors of the original manufacturer's item will be considered for the award.
Navsup Weapon Systems Support Mech

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 336310
New
DIBBS
Supply of Stator Assembly, Pump (NSN 2915-00-449-9118)
ASC SUPPLIER OPER AE AND AF DIV

POSTED

5 days ago

DEADLINE

in 24 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-07A6
This contract is a solicitation for the procurement of 12 O-rings under solicitation number SPE7L1-26-T-07A6 for the Department of Defense Land Supply Chain. The items must be manufactured by an accredited manufacturer listed in the PRI Qualified Manufacturer List or Qualified Products List. Delivery is required within five days after receipt of order, with performance taking place in Portsmouth. The contract mandates strict adherence to technical and quality requirements, including the prohibition of asbestos and class I ozone depleting chemicals. Items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent ultraviolet deterioration. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, and all hardware must be produced according to the current revision of the applicable military or consensus part standards.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336310
New
DIBBS
RETAINER, BALL
Solicitation # SPE7MC-26-T-249H
This contract is for the procurement of four brass ball retainers, identified by NSN 4820011894693 and part number 10420 from Flywheel Supply LLC, for use in indicator liquid level model 104-A. The order is issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-249H, with a required delivery date of August 31, 2026, and a delivery window of 20 days. The items are designated as critical application items and must be shipped FOB Origin to the USS MCCampbell DDG 85. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Inspection and acceptance will take place at the destination, and the contract requires compliance with the DLA Master List of Technical and Quality Requirements.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336310
New
DIBBS
VALVE, CROSSFEED FUEL
Solicitation # SPE7MC-26-T-248W
This contract is for the procurement of 122 units of crossfeed fuel valves, identified by NSN 4820010537990. The item is a restricted source component requiring engineering source approval from the government design control activity, with associated part numbers from Lockheed Martin Corporation and Parker-Hannifin Corporation. The delivery is scheduled for 434 days after order, with a required delivery date of November 23, 2027, shipping FOB Origin to DLA Distribution San Diego. The agreement is subject to several technical and quality requirements, including CMMC Level 2 self-assessment, covered defense information protocols, and specific DLA packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. As a critical application item, it requires strict adherence to configuration change management and the removal of government identification from any non-accepted supplies.
SAN DIEGO

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336310
New
DIBBS
PARTS KIT, ENGINE FU
Solicitation # SPE7L1-26-T-567C
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of two engine fuel parts kits under National Stock Number 2910-01-653-9861. The contract requires delivery within 20 days after receipt of order and is categorized under NAICS code 336310. Performance is designated for Virginia Beach, Virginia, with the primary point of contact being Kristina Derry. The agreement is subject to specific technical and quality requirements as outlined in the DLA Master List, including packaging standards and the removal of government identification from non-accepted supplies. The solicitation period opens on September 3, 2026, with a response deadline of September 9, 2026, under solicitation number SPE7L1-26-T-567C.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in about 21 hours
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
BRACKET, DOUBLE ANGLE
Solicitation # SPE7L1-26-T-07V7
This contract is for the procurement of four double angle brackets, identified by NSN 5340-00-935-8821 and part number TA149D12-13-8. The order requires delivery within 20 days, with a required delivery date of August 28, 2026. Shipping is FOB Origin, and the destination for inspection and acceptance is Fort Stewart, Georgia. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging must comply with DLA requirements and MIL-STD-129, with specific instructions to use ASTM D3951 for non-hazardous materials. All technical and quality requirements are subject to the DLA Master List, and shipments must be sent via the fastest traceable means, excluding parcel post.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
STANDOFF, THREADED, SPAC
Solicitation # SPE7L1-26-T-07U0
This contract is a solicitation for the procurement of one threaded spacing standoff, identified by NSN 5340016842104 and part number 936334 from DRS Sustainment Systems, Inc. The order is issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-07U0. Delivery is required within 10 days after order, with a required delivery date of September 3, 2026. The shipment is destined for the US Army A Co 501st DSB 1st BDE 1AD in Hohenfels, Germany, and must be sent via the fastest traceable means, excluding parcel post. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with MIL-STD-129 and ASTM D3951, unless the material is hazardous, in which case requirement IP025 applies. The terms specify FOB Origin, with both inspection and acceptance occurring at the destination. There is no allowed quantity variance for this item.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-07S1
This contract is a solicitation from the Department of Defense Land Supply Chain for the procurement of one helical compression spring, identified by NSN 5360-01-615-6606 and Kubota Tractor Corp part number 15841-5317-0. The order is designated under purchase request 7018203965 with a required delivery date of September 4, 2026, and a delivery window of five days. The agreement specifies that shipping must be handled via the fastest traceable means, excluding parcel post, with delivery and acceptance occurring at the destination. The item is to be shipped to the Letterkenny Army Depot in Chambersburg, Pennsylvania. Compliance with DLA packaging requirements, MIL-STD-129 marking standards, and specific technical quality requirements is mandatory for the fulfillment of this order.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
CORD, GLOW PLUG
Solicitation # SPE7L1-26-T-07S0
This solicitation, identified as SPE7L1-26-T-07S0, is issued by the Department of Defense Land Supply Chain for the procurement of one glow plug cord, part number 5340-01-537-1189. The contract requires delivery within five days after receipt of order and is to be performed in Chambersburg, Pennsylvania. The response deadline for this requirement is September 21, 2026. The procurement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract includes a provision for the removal of government identification from any non-accepted supplies. The primary point of contact for this acquisition is Isabelle Szulewski.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-07W1
This contract is for the procurement of 299 O-rings under solicitation SPE7L1-26-T-07W1, identified by NSN 5331-01-513-7062. The items must be manufactured according to the current revisions of SAE AS3582 and SAE AMS3304J standards. Delivery is required within 133 days, with a final required delivery date of August 15, 2027, shipping FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. Strict quality and environmental compliance is required, including the prohibition of Class I ozone-depleting chemicals and the intentional addition of mercury. Because the items are susceptible to ultraviolet ray deterioration, they must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Sampling and inspection will be conducted at the destination following MIL-STD-1916 or ASQ H1331, and all marking and packaging must adhere to MIL-STD-129 and MIL-STD-2073-1E.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-07X1
This contract is for the procurement of ten helical compression springs, identified by NSN 5360004033451 and part number 45416 from Triumph Engine Control Systems LLC. The order is issued by the Department of Defense Land Supply Chain with a required delivery date of August 27, 2026, and a delivery window of 20 days. Shipping is FOB Origin with destination inspection and acceptance, requiring the fastest traceable means of transport to Naval Base Ventura County. Compliance with several technical and quality requirements is mandatory, including DLA packaging standards, the removal of government identification from non-accepted supplies, and specific documentation for source approval. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Offerors not listed as approved sources must obtain and submit OEM source approval and technical data packages to the DLA.
Spring Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-07S2
This contract is for the procurement of one protective dust and moisture seal plug, identified by NSN 5340015371188 and Kubota Tractor Corp part number 16851-9601-0. The order is managed under solicitation SPE7L1-26-T-07S2 with a required delivery date of September 4, 2026, and a delivery timeframe of five days after order. The item is to be delivered FOB Origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania, using the fastest traceable shipping method. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging following ASTM D3951 for non-hazardous materials. It explicitly prohibits the use of Class I ozone-depleting chemicals and requires compliance with the DLA Master List of Technical and Quality Requirements. Inspection and acceptance will take place at the destination.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
HINGE, BUTT
Solicitation # SPE7L1-26-T-07U2
This contract is for the procurement of one butt hinge, identified by NSN 5340016805202 and part number 936031 from DRS Sustainment Systems, Inc. The item is designated as a restricted source item requiring engineering source approval by the government design control activity. Delivery is required within 20 days, with a required delivery date of September 3, 2026, and shipping is set as FOB Origin with inspection and acceptance occurring at the destination. The shipment is destined for the US Army A Co 501st DSB in Hohenfels, Germany, and must be sent via the fastest traceable means. Compliance with DLA master lists for technical and quality requirements is mandatory, including specific packaging standards such as MIL-STD-129 and RP001. If the material is hazardous, it must follow IP025 requirements; otherwise, it should be commercially packaged according to ASTM D3951.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
HANDLE, MANUAL CONTROL
Solicitation # SPE7L1-26-T-07T4
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of eight manual control handles under part number 5340-01-614-0173. The contract requires delivery within five days after receipt of order and adheres to specific DLA packaging and quality requirements, including the removal of government identification from any non-accepted supplies. The solicitation, identified as SPE7L1-26-T-07T4, was posted on September 8, 2026, with a response deadline of September 21, 2026. It falls under NAICS code 332722 and is managed by Isabelle Szulewski. Technical and quality standards are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7L1-26-T-07U9
This solicitation issued by the Department of Defense Land Supply Chain is for the procurement of two hand cranks, specifically valve crankshafts, under part number 5340-01-108-8658. The contract requires delivery within 105 days after the order is placed and is categorized under NAICS code 332510. Performance of the contract is designated for New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements as outlined in the DLA Master List, including specific packaging standards and the removal of government identification from non-accepted supplies. Notably, the item contains technical data subject to ITAR and EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
New
DIBBS
ANODE, CORROSION PREVEN
Solicitation # SPE7L1-26-Q-1609
This contract is a firm fixed price solicitation for the procurement of one corrosion preventative anode, identified by NSN 5340-01-724-4266 and part number 120744M from Cathelco Ltd. The item must adhere to source controlled drawing 1X4F3 AMSCBDOC and meet specific technical and quality requirements, including the prohibition of class I ozone depleting chemicals and compliance with CMMC Level 2 self-assessment and covered defense information standards. Delivery is required within 165 days after the order, with inspection and acceptance occurring at the destination. The shipment is destined for the USS Zumwalt DDG 1000 and must be transported via traceable means, excluding parcel post. Packaging must comply with DLA requirements, specifically RP001 and MIL-STD-129, with hazardous materials following IP025 or non-hazardous items following ASTM D3951. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331, and all military property must be marked in accordance with MIL-STD-130N.

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L1-26-T-07U7
This contract is for the procurement of four spur gears, identified by NSN 3020-01-384-2223 and Moog Inc. part number 85020000-02. The acquisition is managed by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-07U7. Delivery is required within 144 days, with a need ship date of September 8, 2026, and an original required delivery date of January 3, 2027. The terms specify FOB Origin with inspection and acceptance occurring at the destination. Packaging must adhere to ASTM D3951 and MIL-STD-129, while following DLA packaging requirements for procurement. All supplies must comply with the DLA Master List of Technical and Quality Requirements, including the removal of government identification from non-accepted supplies. Shipments are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS