Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

O-Ring / Preformed Packing Manufacturing and Supply

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates the manufacture and delivery of 524 units of O-rings or preformed packings identified by NSN 5331-01-226-8749, requiring strict adherence to applicable military specifications. All items must be packaged and marked in full compliance with MIL-STD-129 standards to ensure uniformity and traceability within the defense logistics system. The work is assigned under NAICS code 332618, indicating classification within other fabricated metal product manufacturing, and is structured as a subcontract within the Department of Defense’s supply chain. Performance of the contract is designated to occur at New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, though the specific location of the contractor is not specified. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, leaving a narrow window for proposal submission. The contracting activity is listed under LAND SUPPLIER OPNS ENGINES, indicating this effort supports engine-related logistics operations.

General Info

524 O-rings per military specs to be delivered to New Cumberland, PA by July 30, 2026 for defense engine logistics.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINES

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 524 units of O-rings or preformed packings (NSN: 5331-01-226-8749) compliant with military specifications, including MIL-STD-129 packaging and marking.

Similar Contracts

Same NAICS industry code

Supply of Straight-Headed Pins (NSN: 5315016057397)The contract calls for the manufacture, quality assurance, packaging, and delivery of 89 straight-headed pins designated by NSN 5315016057397, following strict military specifications NASM20392 Rev 01 and NASM5673 Rev 1, with full compliance to the DLA Master List, MIL-STD-129 for labeling and packaging, and ASTM D3951 for commercial packaging standards. All work must adhere to the required technical and procedural benchmarks to ensure interoperability and reliability within defense systems, and the product must be delivered to the specified performance location in New Cumberland, Pennsylvania, with zip code 17070-5002. This is a small business set-aside subcontract under the SBA program, categorized under NAICS code 332618, reserved exclusively for small businesses as defined by the FAR 19.5 regulations. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense. All submissions must be made through the designated DIBBS platform, and suppliers are expected to demonstrate not only technical capability but also full compliance with federal contracting requirements for small business participation.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

PIN, STRAIGHT, HEADEDThe contract specifies the procurement of 89 straight-headed pins identified by NSN 5315-01-605-7397 under solicitation SPE4A6-26-T-07VH, with a total value based on a unit price for each item and a required delivery within 165 days from the award date. The items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-129 and ASTM D3951, though DLA requirements take precedence. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise defined, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The product must conform to NASM20392 Rev 01 and NASM5673 Rev 1, with bare item marking and identification per RQ017, and government identification removed from non-accepted items under RQ011. Inspection and acceptance occur at origin, with no variance allowed in quantity. Packaging must adhere to RP001 DLA packaging standards and be palletized accordingly, shipped FOB origin to the delivery address in New Cumberland, Pennsylvania. The contract is a Total Small Business Set-Aside under NAICS code 332618, with a response deadline in July 2026 and delivery required no later than March 7, 2027.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

PIN, STRAIGHT, HEADEDThe contract specifies the procurement of a single straight-headed pin with part number 901-236-625-275 and NSN 5315-01-649-4032, quantity of one unit, to be delivered within five days under FOB origin terms with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply strictly with MIL-STD-2073-1E and MIL-STD-129, including specified preservation methods and marking requirements, with no special marking needed. The item is designated as a critical application item for The Boeing Company and is subject to non-tailored quality requirements under ISO 9001:2015, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stated. Technical and quality requirements referenced by R or I numbers are incorporated by authority of the DLA Master List, and the revision in effect at the solicitation or award date controls depending on acquisition size. Unit of issue is each, and the delivery destination is CAMP LEMONNIER, DJIBOUTI, under a joint task force contract with transportation governed by DLAD procedure notes. Item unique identification is not required per customer request, and all documentation must align with DLA packaging standards and government-specific identification protocols. The contract was posted on July 20, 2026, with a response deadline of July 28, 2026, under solicitation SPE4A0-26-T-3952, managed by the Department of Defense’s Aviation Supply Chain ESOB.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 11 hours ago

DEADLINE

PIN, STRAIGHT, HEADLEThe contract specifies the procurement of 31 units of a straight, headless pin identified by NSN 5315-01-555-1099 and part number MS20253-4-550, manufactured in accordance with Drawing NR 81205 AS20253 Revision 1 dated 05/30/2001. Delivery is due in 113 days FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the manufacturer’s location. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted under MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified; critical attributes require Verification Level VII or AQL 0.1, major attributes Level IV or AQL 1.0, and minor attributes Level II or AQL 4.0. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements RP001, and all marking and labeling must adhere to physical identification standards RQ017. The item is designated as a critical application item, and all government identification must be removed from non-accepted supplies per RQ011. The delivery destination is DLA Distribution San Joaquin in Tracy, CA, with a required ship date of November 19, 2026, and the original delivery date was October 14, 2026. The contract is issued under solicitation SPE4A6-26-T-07WY, with unit of issue in each, and all terms override any conflicting standards unless explicitly amended.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

ROPE, WIREThe contract specifies the procurement of one unit of rope, wire with NSN 4010-01-732-4216, valued at $815.00, under solicitation SPE4A5-26-T-295W, with delivery required within 20 days after award, by July 14, 2026, to be shipped FOB origin to the Explosive Ordnance Disposal Group 1 at 3500 Attu Rd, Building 104, San Diego, CA 92155-5584. All items must be packaged in accordance with ASTM D3951, but DLA Master List of Technical and Quality Requirements supersede any conflicting requirements, and packaging must be marked and labeled per MIL-STD-129 with unit of issue and quantity per unit pack clearly indicated. Palletization must conform to RP001 DLA Packaging Requirements for Procurement. Sampling for inspection must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with zero non-conformances required in the sample lot unless otherwise specified; attributes are to be classified as Critical, Major, or Minor with corresponding verification levels or AQLs, and manufacturers may choose attribute or variable inspection methods. Physical identification of bare items must comply with RQ017, and government identification must be removed from non-accepted supplies per RQ011. Inspection and acceptance occur at origin, and the contractor must maintain a quality assurance system compliant with SAE AS9003 or ISO 9001 tailored to AS9003. The item is designated as a critical application requiring CMMC Level 2 cybersecurity self-assessment, with safeguarding of covered defense information governed by 252.204-7008 and NIST SP 800-171 DOD assessment requirements. Transportation must be traceable, and parcel post is prohibited. Contractors must comply with hazardous material labeling under 29 CFR 1910.1200 and prohibition of hexavalent chromium per 252.223-7008, and adhere to employment equity, anti-trafficking, and eligibility verification clauses. Invoices must be submitted via WAWF. The contractor must represent its size and socioeconomic status, including UEI

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Cotter Pin Manufacturing and SupplyThe contract seeks the manufacture and supply of 1,923 cotter pins adhering strictly to military specifications, encompassing all stages from production to final delivery. The items must be properly packaged and labeled in compliance with defense standards and delivered to Tracy, California, with the zip code 95304-5000 as the designated place of performance. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, and falls under the NAICS code 332618 for other fabricated metal product manufacturing. The solicitation was posted on July 19, 2026, with responses required by July 27, 2026, indicating a tight turnaround for potential vendors to submit proposals. Participation is expected to meet exacting quality and documentation requirements typical of defense-related supply contracts.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Wire Rope Assembly Manufacturing & DeliveryThe contract requires the manufacture, inspection, packaging, marking, and delivery of 62 units of wire rope assembly identified by NSN 4010-01-490-1932, all in strict compliance with DLA technical, quality, export, and military packaging standards. The work must be performed under a total small business set-aside as defined by the SBA, with the North American Industry Classification System code 332618, ensuring eligibility is limited to small businesses. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating the primary location where delivery and fulfillment must occur. The solicitation was posted on July 19, 2026, and responses are due by July 27, 2026, providing a eight-day window for submission. The contracting organization is the ASC Supplier Operations OEM Division under the Department of Defense, and the contract type is a subcontract, meaning it is awarded under a larger prime contract framework. All deliverables must meet exacting military specifications, including proper marking and packaging to ensure safe transport and compliance with export regulations. The contract is accessible via the DIBBS portal, and while no point of contact is listed, bidders are expected to adhere fully to the technical and procedural requirements outlined by DLA standards.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Spring Manufacturing (Compression Springs)The contract involves the manufacture and delivery of helical compression springs adhering to military specifications, ensuring all technical, dimensional, and performance requirements are met. Compliance with approved packaging and labeling standards is mandatory to support secure handling, traceability, and deployment within military supply chains. This subcontract is issued under NAICS code 332618 and is managed by the Department of Defense through the LAND SUPPLIER OPNS ENGINES agency, with performance required at APO 09494-4640. The solicitation was posted on July 19, 2026, and responses must be submitted by July 30, 2026, with no set-aside designation applied. All work must be completed in accordance with federal defense procurement protocols to meet operational readiness standards.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

PIN, COTTERThe contract is for the procurement of 1,923 cotter pins with NSN/Part Number 5315-01-603-1394 under solicitation SPE4A6-26-T-07MP, issued by the Defense Logistics Agency’s ASC Commodities Division. The requirement mandates strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. All technical data associated with this item is subject to export control under ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure to foreign persons, regardless of location. Access to this controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received explicit approval from DLA. Delivery is due within 169 days of award, with performance occurring in Tracy, California, 95304-5000. The solicitation was posted on July 19, 2026, with responses due by July 27, 2026, under the NAICS code 332618, and the primary point of contact is Michael Jefferson at michael.1.jefferson@dla.mil or 804-240-3923.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

FIBER ROPE ASSEMBLYThe contract is for the procurement of three Fiber Rope Assemblies with NSN/Part Number 4020-01-647-7020, under solicitation SPE8EE-26-T-2117, with a response deadline of July 30, 2026, and a required delivery within five days of award. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and incorporates export control protocols under ITAR or EAR, prohibiting any unauthorized disclosure or transfer of technical data to foreign persons, including foreign nationals within the U.S., and requiring prior approval from the Department of State or Commerce. Access to this controlled data is restricted to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA training and questionnaire. The delivery location is Seal Beach, California, with the Defense Logistics Agency enforcing packaging standards and requiring removal of government identification from non-accepted supplies. The contracting office is under the Department of Defense, and the point of contact is Philip Ferrara, with cybersecurity compliance at CMMC Level 2 required for all third-party assessors involved.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

PIN, LOADINGThe contract issued under solicitation number SPE4A5-26-T-295A requires the delivery of four units of part number 5315-01-605-5417, identified as a Critical Application Item from Hamilton Sundstrand Corporation with P/N 1809-24-6M. Delivery is mandated within 256 days with FOB origin terms, and inspection and acceptance occur at the destination. The quantity variance is strictly zero percent, meaning no over or under shipment is permitted. Packaging must comply with MIL-STD-2073-1E, utilizing preservation method 33, dry preservation, and be marked according to MIL-STD-129 without any special marking codes. Palletization follows DLA’s packaging requirements, and the delivery address is DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103. Transportation instructions are governed by DLAD Proc Notes C19 and C20. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions controlled by the solicitation or award date depending on contract size. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels set at VII, IV, and II for critical, major, and minor attributes respectively unless otherwise specified. Attributes not explicitly defined are treated as major. Zero non-conformances are required in the sample lot unless the contract allows otherwise. Measuring and test equipment must be calibrated and documented, and source approval requests require full documentation as per RC001. Physical identification of bare items must meet RQ017 standards. The unit of issue is each, and the NSN corresponds to the ANSI X12 unit as defined by DLA. The contract was posted on July 19, 2026, with a response deadline of July 27, 2026, and the primary point of contact is Rasulbek Kilichev.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

PIN, QUICK RELEASEThe contract pertains to a quick-release pin, identified by part number 9M635-4-02 and NSN 5315-01-475-9622, with a requirement for four units to be delivered within 393 days of contract award, with a mandated ship date of August 25, 2027. Delivery is FOB origin, and no quantity variance is permitted. The item is classified as a critical application component and must comply with stringent quality and technical standards referenced in the DLA Master List, including configuration change management, packaging per MIL-STD-2073-1E and DLA Packaging Requirements, and marking per MIL-STD-129 with no special marking required. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances accepted unless otherwise stated, with attributes assigned verification levels or AQLs as specified. Item Unique Identification is not required per customer request, and the part has no shelf life. The product is to be delivered to the DLA Distribution facility at New Cumberland, PA, and transportation procedures must align with DLAD procurement notes. Only approved suppliers—The Boeing Company, Northrop Grumman Systems Corporation, and Avibank Mfg., Inc.—are authorized to fulfill this requirement under the referenced specification SPE4A6-26-T-07TB.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

Product Verification Testing (PVT) ServicesThe contract requires the execution of Product Verification Testing (PVT) to validate the performance and compliance of filter assemblies against the military specification MIL-S-901 and Procurement Note E05, ensuring these components meet stringent defense standards for reliability and durability under operational conditions. This work is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for businesses certified by the Small Business Administration, with the North American Industry Classification System code 541380 indicating engineering and technical services. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is issued by the Department of Defense under the organization name LAND SUPPLIER OPNS ENGINES. All testing activities are to be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000, and interested parties must submit their responses through the DIBBS portal using the provided solicitation number SPE7L5026Q0157.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Packaging, Labeling, and Marking (MIL-STD-129 & MIL-STD-2073-1E)The contract requires comprehensive military-compliant packaging, barcoding, and labeling of filter assemblies in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards for delivery to the Defense Logistics Agency. All work must adhere to federal military specifications for documentation, marking, and shipment readiness, ensuring full traceability and compliance throughout the supply chain. The performance location is designated as Tracy, California, with a ZIP code of 95304-5000, and the work is classified as a total small business set-aside under the SBA program, indicating exclusive eligibility for small businesses as defined by the Small Business Administration. The NAICS code 561910 indicates the nature of the work falls under Other Support Activities for Transportation, reflecting the logistical and packaging services required. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is structured as a subcontract opportunity managed by the Department of Defense under the Land Supplier Operations Engines organization. Bidders must be prepared to meet exacting military packaging and labeling requirements and must submit proposals via the DIBBS portal using the provided solicitation number SPE7L526Q0157.

Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

Cybersecurity Compliance & CUI Protection (NIST SP 800-171)The contract requires the implementation and maintenance of robust cybersecurity controls to safeguard Covered Defense Information in full alignment with NIST SP 800-171 and DFARS 252.204-7012 requirements. This includes establishing, documenting, and continuously enforcing security measures across information systems to ensure the confidentiality, integrity, and availability of controlled unclassified information. Compliance must be maintained throughout the contract lifecycle with regular assessments, incident reporting, and remediation of identified vulnerabilities to meet federal defense standards. This is a small business set-aside subcontract under NAICS code 541512, exclusively available to small businesses as defined by the SBA. Performance is required at a designated location in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with the contracting activity under the Department of Defense through LAND SUPPLIER OPNS ENGINES. All work must be executed in accordance with federal acquisition regulations and defense cybersecurity mandates, with no exceptions permitted for non-compliant practices or undocumented controls.

Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

Supply Chain Traceability Documentation & ComplianceThe contract requires full supply chain traceability for all components used in filter assembly, ensuring strict adherence to DFARS regulations and military documentation standards. The contractor must maintain detailed, auditable records that trace every part from origin through final assembly, guaranteeing compliance with defense procurement requirements and enabling full transparency across the supply chain. This includes accurate labeling, serialization, and documentation of material sources, manufacturing processes, and quality control data to meet military-grade integrity expectations. This is a total small business set-aside under NAICS code 541611, specifically designated for small businesses by the SBA, with performance based in Tracy, California, 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026. It is structured as a subcontract under the Department of Defense's Land Supplier Operations Engines organization, with all documentation and compliance activities expected to align with federal defense supply chain protocols. Failure to meet traceability requirements will result in non-compliance and potential contract failure.

Administrative Management and General Management Consulting Services

POSTED

about 11 hours ago

DEADLINE

Manufacturing of Fluid Filter Assemblies (NSN 2910-01-422-7809)The contract calls for the full manufacturing and assembly of seven fluid filter units per military specifications, encompassing every phase from design and fabrication to testing and comprehensive documentation, all requiring formal approval from government engineering sources. Performance of the work is centered in Tracy, California, with the final deliverables expected to meet stringent defense standards under the NSN 2910-01-422-7809. The effort falls under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA to promote small business participation in federal procurement, and is classified under the NAICS code 332996 for other fabricated metal product manufacturing. The opportunity is issued by the Department of Defense under the organizational name Land Supplier Opns Engines, with a response deadline of July 27, 2026, and was posted on July 20, 2026. Although the solicitation number is not listed, the contract is structured as a subcontract and is accessible via the DIBBS platform. No point of contact is provided in the data, indicating that all inquiries must be directed through the official procurement portal. The absence of specified city, state, or country in the office address suggests that the administrative office may be centralized, but the physical production and delivery must be completed at the designated performance location in Tracy.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

FILTER ASSEMBLY, FLUIDThe contract pertains to the procurement of seven fluid filter assemblies with NSN 2910-01-422-7809 under solicitation SPE7L5-26-Q-0157, which is a total small business set-aside classified under NAICS code 336390. Delivery is required within 525 days of award, and the place of performance is specified as Tracy, California, with Mary Rowley designated as the primary point of contact. The item is a restricted source requiring government engineering source approval, and compliance with the DLA Master List of Technical and Quality Requirements is mandatory, incorporating all referenced R and I numbers. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds in or on the supplied hardware, except for specified functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. For non-origin equipment manufacturers, the offeror must submit comprehensive documentation per MIL-T-31000, including all manufacturing drawings and specifications, detailed process and operation sheets outlining critical procedures and inspection criteria, identification of all sources performing critical operations such as forgings and castings, and purchase order copies if available. A shock test extension report compliant with MIL-S-901 and formatted per DI-ENVR-80706 is also required. If original OEM drawings are unavailable, the offeror must provide an engineering analysis detailing how their design was derived, and if reverse engineering was employed, a full report of the methodology must be submitted, including sample counts, measurement techniques, all collected data, justifications for dimensional deviations, and acceptance rationale, to be forwarded to the engineering support activity for review. The solicitation is open for response until July 27, 2026, and all submissions must fully address these technical, quality, and compliance obligations.

Other Motor Vehicle Parts Manufacturing

POSTED

about 11 hours ago

DEADLINE

PUMP, FUEL, METERINGThe contract is for the procurement of ten fuel metering pumps with NSN 2910-01-688-5763 under solicitation SPE7L5-26-T-4527, issued by the Department of Defense through the Land Supplier Operations Engines organization. Deliveries are due within 156 days of award, and responses must be submitted by July 31, 2026. The item falls under NAICS code 336310 and is subject to strict export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons anywhere, including foreign nationals employed by U.S. companies or subsidiaries. Access to this controlled data requires prior approval from DLA, including valid US/Canada Joint Certification Program status, completion of DLA-specific training on export-controlled data handling, and successful submission of the DLA export-controlled data questionnaire. The contractor must also comply with DLA packaging guidelines, removal of government identification from non-accepted supplies, and applicable CMMC Level 2 cybersecurity requirements as a certified third-party assessment organization. All technical and quality specifications referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling unless amended. The primary point of contact is Mary Rowley, reachable via email and phone provided.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 11 hours ago

DEADLINE

Small Business Subcontracting and Accelerated Payment ComplianceThe contract seeks advisory services to ensure compliance with federal requirements governing small business subcontracting and accelerated payments to small business subcontractors under Department of Defense obligations. The work centers on providing expert guidance to uphold regulatory standards related to subcontracting plans, reporting obligations, and timely payment practices mandated for small business participants. The services must align with the NAICS code 541611, which classifies management consulting services, emphasizing strategic advisory functions specific to subcontracting compliance frameworks. Performance of the work is required in Phoenix, Arizona, with a response deadline of July 30, 2026, and the solicitation posted on July 19, 2026. While no specific set-aside designation is identified, the focus on small business subcontractors implies a strong emphasis on meeting federal small business participation goals. The contracting activity falls under the Land Supplier Operations Engineers organization within the Department of Defense, indicating this effort supports defense supply chain integrity and equitable economic opportunity for small businesses. Interested parties must respond through the designated DIBBS platform before the stated deadline to be considered for award.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

DLA Bid Submission and Compliance SupportThe contract requires support in preparing and submitting compliant bids through the DLA’s DIBBS system, with a focus on ensuring full alignment with federal acquisition regulations. This includes managing SAM.gov registration and compiling all necessary FAR and DFARS documentation to meet federal contracting requirements. The work is classified as a subcontract under NAICS code 541211, which categorizes it within professional, scientific, and technical services. Performance is designated to occur in Phoenix, Arizona, with a zip code of 85043, indicating the operational focus of the task. The solicitation was posted on July 19, 2026, and the response deadline is set for July 30, 2026. The contracting activity is managed by the Department of Defense under the organization Land Supplier Opns Engines, underscoring its defense-related nature. All submissions must be made through the official DIBBS platform, and bidders are expected to have established experience with federal bid processes, documentation rigor, and compliance frameworks. There is no specified set-aside classification, meaning the opportunity is open to all qualified entities, and successful performance hinges on accuracy, timeliness, and adherence to all regulatory standards outlined by the DLA.

Offices of Certified Public Accountants

POSTED

DEADLINE

Hazardous Material Labeling and Compliance ServicesThe contract calls for the provision of hazard communication labels and full compliance support for packaging to meet OSHA and DFARS standards, ensuring that all hazardous materials are properly labeled and documented in accordance with federal regulations. This subcontract is specifically scoped to support safe handling, storage, and transportation of hazardous substances through accurate, compliant labeling systems and ongoing regulatory adherence. The work must be performed at the designated place of performance in Phoenix, Arizona, with a zip code of 85043, and the contractor is expected to deliver services that align with the North American Industry Classification System code 541690, which covers other scientific and technical consulting services. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, and the contracting office is under the Department of Defense through LAND SUPPLIER OPNS ENGINES, indicating a defense-related procurement requirement.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Leaf Spring Manufacturing and SupplyThe contract entails the manufacture and supply of 196 leaf springs designated by NSN 5360011190798, all of which must fully comply with applicable military specifications and delivery standards. The work is being procured as a subcontract under the Department of Defense, specifically managed by LAND SUPPLIER OPNS ENGINES, with performance required to be completed at a location in Phoenix, Arizona, zip code 85043. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, with the NAICS code 332999 indicating the procurement falls under other fabricated metal product manufacturing. All components must meet stringent quality and technical requirements to ensure compatibility and reliability in military applications.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Product Verification Testing (PVT) Sample ManagementThe contract calls for the management and submission of Product Verification Testing (PVT) samples to ensure compliance with government requirements before initiating full-scale production. This includes coordinating all logistics related to sample preparation, transportation, and documentation to meet regulatory timelines and standards. The work must be executed with precision to facilitate timely government approval, requiring thorough attention to detail in recordkeeping and communication throughout the verification process. The effort is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. The solicitation is administered by the Department of Defense under the agency name LAND SUPPLIER OPNS ENGINES, with performance centered in Tracy, California, at the ZIP code 95304-5000. The North American Industry Classification System code is 541380, indicating the work falls under other scientific and technical consulting services. The posting date is July 19, 2026, with a strict response deadline of July 30, 2026. Interested parties must submit their proposals through the designated DIBBS portal before the deadline to be considered for award.

Testing Laboratories and Services

POSTED

DEADLINE