This Solicitation opportunity from Department Of Defense was posted on June 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

O-RING

Closed

SPE7M4-26-T-178LFederal

Submission Closed06/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332618

New

DIBBS

53--PIN,QUICK RELEASE

Solicitation # SPE7L1-26-T-11C8

This contract is a solicitation for the procurement of 11 quick release pins, identified by NSN 5315-01-727-6779. The requirement is issued by the Department of Defense Land Supply Chain and is designated as a total small business set-aside under NAICS code 332618. Delivery is required within 57 days, with a required delivery date of September 3, 2026, and shipment is to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract specifies a zero percent quantity variance and requires compliance with various DLA master lists for technical, quality, and documentation requirements.

POSTED

DEADLINE

Supply of O-Rings (NSN 5331-01-181-4941)

POSTED

DEADLINE

Supply of O-Rings (NSN 5331-01-007-4895)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Specialized Wire and Connector Supply

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Stainless Steel Tensioner Belt

Defense Logistics Agency

POSTED

DEADLINE

Supply of Straight Headless Pins (NSN 5315-01-552-1148)

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of PRI-Accredited Synthetic Rubber O-Rings

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-392R

This contract is for the procurement of synthetic rubber O-rings, specifically part number MS29513-155 under NSN 5331005293723. The requirement consists of two line items totaling 451 units, with 225 units destined for DLA Distribution New Cumberland and 226 units for DLA Distribution Barstow. The items must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturer List (QML) or Qualified Products List (QPL) and must adhere to SAE AS29513 and SAE AMS-P-5315C standards. Key technical requirements include a non-extendable shelf life of 180 months and a strict prohibition on the intentional addition of mercury or asbestos. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, utilizing medium-duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Delivery is required within 105 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination.

FLUID HANDLING DIVISION

POSTED

DEADLINE

SWA GING SLEEVE, WIRE

Solicitation # SPE4A6-26-R-XD83

Solicitation SPE4A6-26-R-XD83 is a Total Small Business Set-Aside issued by the DLA Aviation ASC Commodities Division for the procurement of wire rope swaging sleeves (NSN 4030004315537). The requirement may result in multiple Simplified Indefinite-Delivery Contracts (SIDC) with a five-year term or an aggregate ceiling of 350,000 dollars. The scope includes a guaranteed minimum of 173 units (where one unit equals 100 each) for the first base year, with potential delivery orders ranging up to 1,050 units and a monthly wartime rate of 56 units starting 30 days after award. Technical requirements specify that the sleeves must be zinc coated per ASTM B633 and packaged according to MIL-STD-2073-1E and MIL-STD-129. Due to the nature of the technical data, offerors must maintain an approved US/Canada Joint Certification Program certification to comply with ITAR or EAR export controls. Additionally, the contract requires CMMC Level 2 cybersecurity certification. Awards will be based on the most advantageous offer, considering price, past performance, and quoted delivery, with past performance weighted more heavily than delivery. Inspection and acceptance will occur at the source, and all invoicing must be processed through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-393Z

Solicitation SPE7M4-26-T-393Z is a Request for Quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 663 O-rings under NSN 5331-01-007-4895. The items are identified as commercial products and are designated as critical application items. They must adhere to specific technical standards, including SAE AS3209C Revision C and SAE AMS7276J Revision J. Additionally, the items are subject to Qualified Products List requirements maintained by the Performance Review Institute. The required delivery timeline is 170 days, with a need ship date of September 10, 2026, and an original required delivery date of August 9, 2027. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah. The contract imposes strict material and environmental restrictions, prohibiting the use of class I ozone-depleting chemicals, asbestos, and the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001, with a specific requirement for Special Marking Code 32 to denote a non-extendable shelf life of 240 months. Offerors must comply with the Buy American Act and the Berry Amendment, and they are prohibited from using additive manufacturing processes unless authorized. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Quotations were due by September 21, 2026, under NAICS code 332618.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-09N5

Solicitation SPE7L1-26-T-09N5, issued by DLA Land and Maritime, is a request for quotations for 1,330 O-rings (NSN 5331-01-107-4950) designated as critical application items. The procurement falls under NAICS code 332618 and requires delivery to Robins AFB, Georgia, within 126 days. This is a Qualified Products List (QPL) and Qualified Manufacturers List (QML) item, meaning the supplier must be an accredited manufacturer or distributor and provide specific identification details, including manufacturing and source CAGE codes, item name, service identification, and test numbers. The items must have a non-extendable shelf life of 180 months and be entirely free of asbestos. Strict packaging and material standards apply, including the use of opaque barrier bags to protect against UV rays and cushioning material to prevent deformation. All marking must comply with MIL-STD-129, and packaging must follow MIL-STD-2073-1E and DLA RP001 requirements. The contract prohibits the use of class I ozone-depleting chemicals and mercury compounds. Offerors must comply with the Buy American Act and the Berry Amendment, with a reduced threshold of 150,000 dollars. Submissions are handled via the DIBBS system, and the government may utilize a HUBZone price evaluation preference for award. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28UT

Solicitation SPE4A6-26-T-28UT is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 15 plain tapered pins, identified by NSN 5315-01-453-8363 and part number 845-7016077-X-071. This item is designated as a critical application item and must be produced according to technical drawing TDP Rev A Gen 2, basic drawing 53711 7016077, revision XA. The procurement is governed by NAICS code 332618 and includes a price evaluation preference for SBA-certified HUBZone small business concerns. Delivery is specified as FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a delivery window of 141 days. The contract mandates strict quality and technical compliance, requiring the manufacturer's inspection system to meet SAE AS9003 or ISO 9001 standards. Inspection and acceptance will occur at the origin per RQ009, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with a specific prohibition on mercury or mercury compounds. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information and CMMC Level 2 certification.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

General Info

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

DDCT-S 540 FIRST STREET SE, CORPUS CHRISTI, TX, 78419-5255, USA

Set-Aside

NONE

Documents

(1)

SPE7M4-26-T-178L.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 11

Solicitation

Response DeadlineJun 22

Deadline has passed

Submission Closed

06/22/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressUSA

Contacts

Blake Tushar

contact@example.gov

+1 (555) 000-0000

Full Description

O-RING
O-RING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
P/N M83248/1-255
IDENTIFY TO:
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
THE (QPL) DOCUMENT IS PUBLISHED AND MAINTAINED
BY THE PERFORMANCE REVIEW INSTITUTE,
161 THRON HILL ROAD,WARRENDALE, PENNSYLVANIA
15086-7527. TO VIEW CONTRACTORS CURRENTLY
APPROVED BY (PRI) GO TO http://www.p-r-i.org http://www.p-r-i.org
THE MANUFACTURER FOR THE QPL ITEM MUST BE APPROVED FOR THE QPL ITEM AT THE TIME OF THE CONTRACT AWARD.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
SPE7M4-26-T-178L
SECTION B
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY NO ASBESTOS AS DEFINED IN FED-STD-313 IS PERMITTED IN THIS ITEM THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE NSN/Part Number: 5331-00-554-0990 Quantity: 563 EA Purchase Request: 7017133691QTY: 563 Delivery: 168 days ADO