Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

O-Ring Supply (NSN 5331001733022)

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 616 specialized O-rings under NSN 5331001733022 for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for producing the units and packaging them in medium duty, waterproof, greaseproof, and opaque bags. Quality assurance must be maintained through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 standards. The completed order is to be delivered to DLA Distribution centers located in Albany, Georgia, and Oklahoma. This procurement falls under NAICS code 325212 and is managed by the Department of Defense. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

General Info

Manufacture and supply 616 specialized O-rings for DLA Weapons Support Fluid Handling Division.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

325212 - Synthetic Rubber Manufacturing

Place of Performance

ALBANY, GA, 31704-1128, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-2447.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

O-RING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized O-rings for prime contractors delivering DLA Weapons Support Fluid Handling Division contracts. Manufactures O-rings to NSN 5331001733022 specifications, utilizing medium duty, waterproof, greaseproof, opaque bags for packaging. Adheres to zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Delivers 616 units of O-rings to DLA Distribution centers in Albany, GA and Oklahoma.

Similar Contracts

Same NAICS industry code

Synthetic Rubber Packing Retainers (Packing Backup Rings)This subcontract involves the manufacture and supply of 417 synthetic rubber packing retainers, specifically packing backup rings under NSN 5330-01-0069491, for prime contractors supporting DLA supply contracts. The parts must be produced from asbestos-free synthetic rubber in accordance with FED-STD-313 and undergo quality sampling and inspection following MIL-STD-1916 or ASQ H1331 standards. Each end item is required to be packaged and sealed in medium duty, waterproof, greaseproof, and opaque bags. The contract is issued by the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle SPT, with the place of performance located at Robins Air Force Base. The procurement falls under NAICS code 325212. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Bearing Seal Supplier (NSN 5330-00-0766458)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations, requires the provision of 69 asbestos-free bearing seals, specifically NSN 5330-00-0766458. The supplier is responsible for manufacturing or sourcing these seals in strict compliance with the Buy American Act and the Berry Amendment. All items must be delivered FOB Origin to the DLA Distribution Depot Hill in Utah. To ensure quality and standardization, the seals must be packaged in medium-duty, waterproof, greaseproof, and opaque bags according to MIL-DTL-117 and marked in accordance with MIL-STD-129. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 325212, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

Supply of Pneumatic Tire Wheel Segments (NSN 2530-01-450-3126)This subcontract involves the supply of seven pneumatic tire wheel segments, identified by NSN 2530-01-450-3126, for prime contractors working on Department of Defense procurement projects. The agreement mandates that no Class I ozone-depleting chemicals be used in the production process and requires strict adherence to MIL-STD-2073-1E packaging standards. Quality assurance is governed by FAR 52.246-1 and 52.246-2 destination inspection standards to ensure all units meet federal requirements. The contract is managed under the DLA DIST SAN JOAQUIN agency with the place of performance located in Tracy, California. All seven units must be delivered by May 10, 2027. The procurement falls under NAICS code 325212 and was posted on November 4, 2026, with a response deadline of November 16, 2026.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of O-Rings (NSN 5331-00-951-3231)This subcontract involves the procurement or manufacture of two specialized O-rings under NSN 5331-00-951-3231 for the Department of Defense, specifically supporting the DLA Weapons Support Land Supply Chain. The contractor must ensure all units meet strict technical specifications, with a specific prohibition against using additive manufacturing unless prior authorization is granted. All hazardous materials must be packaged in accordance with 29 CFR 1910.1200, and the final delivery is set as FOB Destination to Joint Base Pearl Harbor. The opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026. It falls under NAICS code 325212 and is intended for prime contractors operating within the defense supply chain.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Fuel Cell Component Materials (Tier 2 Supplier)This subcontract, managed by the Department of Defense under agency F3YCCF 448 Scmw, establishes a Tier 2 supplier relationship for the procurement of raw materials and specialized components used in US Air Force KC-135 fuel cell projects. The scope of work involves the production and delivery of high-performance materials, specifically fuel-resistant polymers, synthetic rubbers, and specialized adhesives integrated with chemical-resistant polymers and high-strength aerospace textiles. To ensure flight safety and quality, the supplier must strictly adhere to aerospace grade material standards and provide comprehensive material certifications, including Certificates of Conformance. The contract is categorized under NAICS code 325212, with a response deadline set for December 4, 2026. Performance of the contract is centered in zip code 73145.

F3YCCF 448 Scmw

POSTED

DEADLINE

RUBBER SHEET, SOLID

Solicitation # SPE7M2-27-T-0566

Solicitation SPE7M2-27-T-0566 is a request for quotations issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 546 solid rubber sheets. The items must adhere to MIL-PRF-15624H Class III specifications, measuring 36 inches long, 36 inches wide, and 0.062 inches thick. This is a critical application item with a non-extendable shelf life of 180 months. Each sheet must be marked in red with the specification, contract number, and shelf life cure and expiration dates. The procurement is conducted under the First Destination Transportation program with delivery terms set as FOB Origin, and the original required delivery date is June 30, 2027, with a need ship date of April 26, 2027. The contract requires strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirements. Inspection and acceptance will occur at the destination. The solicitation is a total small business set-aside under FAR 19.5, though some sections of the documentation contain conflicting notes regarding set-aside status. Key regulatory requirements include the Buy American Act, DFARS cybersecurity reporting for covered defense information, and prohibitions on the use of mercury and hexavalent chromium. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

NONMETALLIC SPECIAL SH

Solicitation # SPE8E5-27-T-0394

Solicitation SPE8E5-27-T-0394 is a small business set-aside request for quotations issued by the DLA Troop Support Construction and Equipment office for 412 feet of nonmetallic special shaped rubber sections. The materials must adhere to Federal Specifications and Ordnance Corp drawings, with a mandatory minimum length of 10 feet per section. Delivery is required within 167 days after order, with a target delivery date of March 4, 2027, shipping FOB Origin to the DDSP New Cumberland facility in Pennsylvania. The procurement includes a quantity variance allowance of plus or minus 10 percent. Compliance requirements are stringent, requiring a Certificate of Quality Compliance and adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, offerors must have an approved US/Canada Joint Certification Program certification and DLA authority approval to access export-controlled data subject to ITAR or EAR regulations. Additionally, the contract mandates CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DIBBS portal by November 9, 2026, and payment will be processed electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Rubber Strip Manufacturer (NSN 9320016988235)This subcontract involves the fabrication and supply of 45 units of specialized rubber strips, identified by NSN 9320016988235, for prime contractors supporting Department of Defense supply contracts through Depot Oklahoma. The manufacturer must utilize specific rubber compounding and molding equipment to ensure all units are produced in strict accordance with the DLA Master List of Technical and Quality Requirements. Critical compliance measures include the application of special marking code 32 for shelf-life tracking and adherence to MIL-STD-2073-1E and MIL-STD-129 for all packaging and marking. Performance will take place at Tinker AFB, with the solicitation posted on October 28, 2026, and a response deadline set for November 9, 2026.

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0355

Solicitation SPE8E5-27-T-0355 is a fixed-price procurement for 45 units of rubber strips, identified by NSN 9320016988235. The contract is issued by the Defense Logistics Agency (DLA) for delivery to the DLA Distribution Depot Oklahoma at Tinker AFB. Key delivery milestones include a need ship date of October 31, 2026, and an original required delivery date of February 2, 2027, with a delivery window of 46 days after receipt of order. The terms are FOB Origin, and both inspection and acceptance will occur at the destination. This is a critical application item with strict shelf-life and environmental requirements. The rubber strips are classified as Code C non-extendable items with a total shelf-life of three months; materials must have at least 85% of this shelf-life remaining upon delivery. Storage and shipment must be maintained in a temperature-controlled environment between 40 and 85 degrees Fahrenheit. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, specifically utilizing special marking code 32 for shelf-life. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and the First Destination Transportation program. Payment and receiving reports must be processed electronically via the Wide Area WorkFlow (WAWF) system. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS).

POSTED

DEADLINE

Supply of Nonmetallic Synthetic Rubber HoseThis subcontract involves the supply of 264 feet of bulk nonmetallic synthetic rubber hose to prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The required product is a wire-reinforced hose with a 2-inch internal diameter that must conform to the General Specification for Hose, Synthetic Rubber, Wire Reinforced. Additionally, the manufacturer is responsible for applying shelf-life markings on all unit packs in accordance with MIL-STD-129, Section 5.2.1. The contract falls under NAICS code 325212 and specifies New Cumberland as the place of performance. Interested parties should note the response deadline of November 9, 2026, for this procurement effort.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

O-Ring Supply (NSN 5331-01-013-9653)This subcontract involves the manufacture and supply of 138 asbestos-free O-rings for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be produced according to NSN 5331-01-013-9653 specifications and delivered FOB Origin to Tracy, California. The contractor is required to adhere to strict quality assurance and packaging standards, including MIL-STD-1916 or ASQ H1331 for quality, and MIL-STD-2073-1E and MIL-STD-129 for marking. All items must be sealed in MIL-DTL-117 waterproof, greaseproof, and opaque bags. Additionally, the supplier must maintain full compliance with the Buy American Act and the Berry Amendment.

All Other Plastics Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing specialized military-grade packaging, marking, and palletization services for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 1,863 tube caps to be delivered via FOB Origin shipment. All activities must strictly adhere to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization, utilizing specific unit and intermediate container configurations. The project is categorized under NAICS code 333613 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this specialized logistics requirement supporting prime contractors on DLA projects.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Manufacturer of Steel Tube Caps (NSN 4730013592430)This subcontract involves the manufacture and delivery of 1,863 steel tube caps for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the components using precision machining or forming equipment to ensure full compliance with technical standards SAE J1453-3 and SAE J1453-1-2012. The agreement mandates strict adherence to the Buy American Act and prohibits the use of Class I ozone depleting chemicals during production. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

POSTED

about 7 hours ago

DEADLINE

Metal Tube Assembly Manufacturer/SupplierThis subcontract involves the manufacture and supply of 11 metal tube assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The supplier is responsible for ensuring all units meet NSN 4710016052191 specifications and adhere to strict logistics requirements, including ASTM D3951 packaging, MIL-STD-129 marking and labeling, and RP001 palletization. Performance for this contract is based in San Diego, California. To qualify, the contractor must maintain DFARS compliance for the safeguarding of covered defense information and complete a CMMC Level 2 self-assessment. The opportunity was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supplier of Critical Application Breathing Air HosesThis subcontract involves the supply of five critical application breathing air hoses for the DLA Weapons Support Fluid Handling Division. The required hardware must match NSN 4720014540367 and Hydraflow part number 57207-5. Delivery is specified as FOB Origin to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. The supplier must adhere to strict regulatory standards, including the Berry Amendment, the Buy American Act, and MIL-STD-129 marking requirements. Additionally, the contractor is required to complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. The response deadline for this opportunity is November 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

Ball Valve Parts Kit Manufacturing and SupplyThis subcontract involves the manufacture and supply of specialized ball valve parts kits for NSN 4820016773949 to support prime contractors delivering for the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for sourcing or producing components that strictly adhere to the DLA Master List of Technical and Quality Requirements, with final delivery to Tracy, California. Rigorous quality and security standards are mandatory, including quality control certifications per SAE AS9003 or ISO 9001 and cybersecurity compliance with NIST SP 800-171. Additionally, all items must be packaged with Hazard Warning Labels in accordance with DFARS 252.223-7001. Responses for this opportunity are due by November 16, 2026.

Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720-00-274-9356)This subcontract involves the supply of nine nonmetallic hose assemblies, identified by NSN 4720-00-274-9356, for the Department of Defense DLA Weapons Support Fluid Handling Division. The selected provider is responsible for manufacturing or sourcing these assemblies and ensuring they are delivered to the specified destination in New Cumberland. The contractor must maintain strict adherence to DLA Technical and Quality Requirements as well as DLAD standards. Furthermore, the agreement mandates full compliance with the Buy American Act and the Berry Amendment to ensure regulatory alignment with domestic sourcing requirements.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 7 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The contractor is responsible for providing specialized packaging for hardware using medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117 to protect against ultraviolet ray deterioration. Additionally, the scope includes palletization and marking services that must adhere to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. The final deliverables consist of fully packaged and marked retainers prepared for shipment to the DLA Distribution Depot Oklahoma. Performance for this contract takes place at Tinker AFB, zip code 73145-8000. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 561910.

Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

Manufacture and Supply of Packing Retainers (MS27595-112)This subcontract involves the manufacture and supply of 863 packing retainers, part number MS27595-112, for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the units in accordance with the DLA Master List of Technical and Quality Requirements and ensuring all products meet Buy American Act compliance. Quality assurance must be verified using MIL-STD-1916 or ASQ H1331 zero-based sampling plans. The completed order of 863 units is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. This procurement falls under NAICS code 332721 and is managed by the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Nonmetallic Hose Raw Material SupplyThis subcontract involves the supply of raw nonmetallic tubing and polymer stock to prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The materials must strictly adhere to the technical specifications of NSN 4720015221198 and be delivered as certified raw material stock. The supplier is required to ensure that no mercury or mercury-containing compounds are intentionally added to the materials and must provide all necessary Material Safety Data Sheets and hazard warning labels. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 326199.

All Other Plastics Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Nonmetallic Hose Assembly FabricationThis subcontract involves the fabrication of six nonmetallic hose assemblies for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The manufacturer must adhere strictly to NSN 4720015221198 specifications, ensuring that no mercury is intentionally added to the products. Additionally, the use of additive manufacturing is prohibited unless specific authorization is granted. The contractor is responsible for the complete delivery of the assemblies, which must be marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E. Performance for this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for November 16, 2026.

Rubber Product Manufacturing for Mechanical Use

POSTED

about 7 hours ago

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the manufacture and supply of nine nonmetallic hose assemblies, specifically part number 7019023597, for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The supplier is responsible for ensuring all units are packaged according to RP001 and marked in compliance with MIL-STD-129, while strictly adhering to the technical and quality standards outlined in RA001. The project is categorized under NAICS code 339999, with the place of performance located in New Cumberland. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 5, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS