Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

O-RING

Active
SPE7L1-26-T-948LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 435 O-RINGS with NSN/Part Number 5331-01-170-9114 under solicitation SPE7L1-26-T-948L, issued by the Department of Defense’s Land Supply Chain. Deliveries are required within 164 days after order, and responses must be submitted by August 21, 2026. All supplies must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and solicitation amendments. The items must be free of asbestos and any use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements; alternative materials require prior approval. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. Documentation for source approval requests must follow RC001 guidelines, and covered defense information provisions apply. The place of performance is Tracy, California, with Kristie Fown as the primary point of contact.

General Info

Procure 435 O-rings, NSN 5331-01-170-9114, deliver by 164 days, no asbestos or ozone-depleting chemicals, Tracy, CA.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-948L for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristie Fown
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5331-01-170-9114 Quantity: 435 EA Purchase Request: 7017777144QTY: 435 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
Supply of Plain Seal (NSN: 5330-01-511-5641)
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L0-26-Q-0297
The contract is for the supply of 720 units of a gasket identified by NSN 5330-01-207-6449, with a delivery requirement within 120 days after award. The item must be free of asbestos, and any alternative material or substitution must be formally approved under Clause L30 and Provision 4 conditions. Technical and quality standards referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a subsequent amendment supersedes it. The solicitation number is SPE7L0-26-Q-0297, posted on August 10, 2026, with responses due by August 24, 2026. The contracting activity is under the Department of Defense, specifically the Land Supply Chain ESOC Buys office, with point of contact Kylie Proskurenko reachable via email and phone. The purchase request number is 7017674860, and all supplies must be delivered without any government identification markings if rejected. The procurement is administered through the DIBBS system, with the official solicitation page accessible via the provided URL.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M2-26-Q-0733
This contract pertains to the procurement of a restricted-source item identified by NSN 5330-00-786-5492, with a quantity of 14 units, under solicitation SPE7M2-26-Q-0733. The item requires engineering source approval by the government design control activity and must comply with stringent packaging, documentation, and traceability standards set forth in DLA’s Master List of Technical and Quality Requirements. All supplies must adhere to prohibitions against ozone-depleting chemicals and intentional use of mercury or mercury-containing compounds, except for specific functional applications like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemically specified reagents approved by NAVSEA; portable mercury-containing items must also meet shock-proof and dual-containment standards per NAVSEA 5100-003D. Item markings must include the contract number, NAWC CAGE code, and part number unless overridden by technical drawings, and all bare items must conform to NAVAIR aircraft launch and recovery equipment traceability requirements. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized DLA approval may access this data. Manufacturing and non-manufacturing entities must hold SAE AS9100 accreditation and meet non-destructive testing (NDT) accreditation requirements. Submission of a First Article Testing Report, Production Test and Inspection Report, and Certificate of Quality Compliance is mandatory, with surplus materials deemed unacceptable. Delivery is due 449 days after award, and all technical data and requirements are governed by the solicitation version in effect on the issue date, with updates controlled by any subsequent amendments. The place of performance is San Diego, CA, with Victoria Payne at DLA as the point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC ST
Solicitation # SPE7L1-26-T-949M
The contract specifies the procurement of four nonmetallic strip seals identified by NSN 5330-01-649-5588 under solicitation SPE7L1-26-T-949M, with a required delivery within five days after order. The item is classified as a commercial item and must be free of asbestos, with any alternative materials requiring approval per Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item is subject to MIL-STD-130N for identification marking of U.S. military property and covered defense information protocols. The place of performance is Anniston, Alabama, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-328M
The contract specifies the procurement of a synthetic rubber gasket with an outside diameter of 5.063 inches, an inside diameter of 1.875 inches, and a thickness of 0.125 inches, classified as a critical item requiring source inspection and compliance with stringent technical and quality standards. The item is defined by a military or consensus non-government standard, and all units manufactured after the solicitation date must conform to the current revision of that standard, with past revisions accepted only for previously manufactured hardware. The gasket must be free of asbestos as defined in Fed-Std-313 and must not contain intentional mercury or mercury compounds except in specific exempted applications such as batteries or instrument sensors, with additional containment requirements for portable devices. It carries a non-extendable 36-month shelf life under Type I Code Q requirements, and each unit must be permanently marked every three feet with the specification number, revision, type, class, and cure or manufacture date in accordance with MIL-STD-190, including approved colors and environmental resistance. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1 to protect against UV degradation. Palletization follows DLA packaging requirements, and all markings must include the special code 32 indicating Type I shelf life. The item is subject to inspection and acceptance at destination, with a delivery window of 87 days from the contract award and a required delivery date of December 31, 2026. The contractor must certify material compliance, understand bare item marking requirements, and deliver 215 units FOB origin under a firm fixed price of $215.00 each, totaling $46,225.00. The delivery address is the DLA Distribution New Cumberland Facility, and transportation logistics must adhere to DLAD Procurement Notes C19 and C20. The solicitation number is SPE7M4-26-T-328M, with a response deadline of August 21, 2026, and the item falls under Federal Supply Class 5330 with NSN 5330-01-126-8850.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
RETAINER ASSY
Solicitation # SPE7M4-26-T-329D
The retainer assembly, identified by NSN 5330-00-525-6138 and quantity of 126 units, is solicited under contract SPE7M4-26-T-329D with a response deadline of August 21, 2026, and a required delivery date 95 days after award. This item is classified as a commercial item and strictly prohibits the use of asbestos as defined in FED-STD-313. All technical and quality requirements applicable to this procurement are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Government identification must be removed from non-accepted supplies in accordance with RQ011. The procurement is administered by the Department of Defense’s Fluid Handling Division, with performance located at Tinker AFB, Oklahoma, and primary point of contact Rory O’Reilly at dla.mil. The NAICS code 339991 applies, and the solicitation is issued through the DLA eProcurement portal.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
C-SEAL
Solicitation # SPEFA5-26-Q-0069
The contract specifies the procurement of 21 units of C-SEAL, identified by NSN/part number 5331-LN-003-3716, under solicitation number SPEFA5-26-Q-0069, with a firm fixed price and no variance allowed in quantity. Delivery is required within 30 days after award, with inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements, ensuring unit of issue and quantity per unit pack match the contract specifications. The item is to be shipped to the freight address at Fleet Readiness Center DLA in Cherry Point, North Carolina, while the parcel post address is for administrative use. The required delivery date is February 26, 2027, associated with purchase request 7017339509. The contract emphasizes adherence to all DLA Master List of Technical and Quality Requirements, which supersede ANSI standards where applicable. The solicitation was posted on August 10, 2026, with responses due by August 17, 2026, and the point of contact is Tanya Whitney, reachable via email and phone provided.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7L1-26-T-947T
The contract is for two nonmetallic seals identified by NSN 5330-01-692-9075 under solicitation SPE7L1-26-T-947T, with a required delivery within 20 days of award. The item is classified as a commercial item and must be free of asbestos, with any alternative materials requiring approval under Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item must also be marked in accordance with MIL-STD-130N for U.S. military property identification, and government identification must be removed from non-accepted supplies. Covered defense information potentially applies, and packaging and handling must adhere to DLA packaging standards. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, and performance is due at Davis Monthan AFB, Arizona, under the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7M4-26-T-328P
This contract specifies the procurement of a nonmetallic special shaped seal, identified by NSN 5330005365225 and part number 3-69002-1, manufactured under requirements applicable to critical applications as defined by The Boeing Company and BASIC RUBBER AND PLASTICS CO. The item is classified as a Type I (Code U) shelf-life item with a strict non-extendable shelf life of 96 months. No asbestos is permitted per Fed-Std-313, and all packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 Type II Class C Style 1, which mandates medium duty, waterproof, greaseproof, opaque sealing to protect against UV deterioration. Packaging and marking must adhere to MIL-STD-129 and DLA Packaging Requirements, including specific codes for preservation, cushioning, and unit containment, with palletization governed by RP001. The seal is subject to inspection and acceptance at destination, with zero variance allowed in quantity. Delivery is required within 200 days from award, FOB origin, to the DLA Distribution Depot at Tinker AFB, Oklahoma, with a required ship date of July 28, 2026, and original delivery date of June 3, 2027. All technical and quality specifications referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation issue or award date based on acquisition type. The item is to be shipped under Federal Supply Classifications 5330/5331, and transportation and handling follow DLAD Proc Notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-948G
Offerors must submit quotations for O-rings under solicitation SPE7L1-26-T-948G, specifying manufacturer, CAGE code, item name, service identification, and test number, while ensuring compliance with FAR 52.209-1 and excluding covered telecommunications equipment or services in accordance with FAR 52.204-24 and DFARS 252.204-7016. Domestic material restrictions under the Berry Amendment, Buy American Act, and related DFARS clauses apply, requiring full disclosure of non-domestic components if applicable, with the Berry Amendment threshold now at $150,000. Small business joint ventures must provide representations under FAR 52.212-3 and 52.219-1 for eligibility in designated categories. Due to fluctuating demand, offerors are strongly advised to quote quantity ranges to facilitate award flexibility without administrative delays, though this does not apply to Auto IDC. All vendors must register via DLA’s AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with Web Services users required to update their schema per DIBBS notifications issued in April 2025. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and offers containing AM-produced items will be deemed non-compliant. Fast Pay is not available for this solicitation. Offerors unable to respond by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or reason to avoid assumption of non-procurability. APEX Accelerators offer free assistance to enhance government contracting capability. The item is for 114 units with a total PR quantity of 477, delivery due in 97 days, and performance is at Robins AFB, Georgia.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAINER
Solicitation # SPE7L1-26-T-947R
The contract is for a packing with retainer item identified by NSN 5330-01-066-9423 and part number 5267, supplied by Thomas and Betts Corp under the solicitation SPE7L1-26-T-947R. The requirement specifies one unit to be delivered within five days of award, with strict adherence to Federal standards prohibiting any asbestos as defined in Fed-Std-313. The packaging and manufacturing must comply with DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issuance or award date depending on the acquisition size. The item falls under NAICS code 339991 and is procured by the Department of Defense’s Land Supply Chain under a federal solicitation with no set-aside designation. All government identification must be removed from non-accepted supplies. The place of performance is Solomon(s), MD 20688-0054, and the primary point of contact is Kristina Derry, reachable via email and phone provided. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, DEHYDRATOR
Solicitation # SPE8E9-26-Q-0670
This contract is for a Parts Kit, Dehydrator, consisting of ten O-rings and one backup ring, intended for overhauling a dehydrator tower used in equipment supplied by Air-Dry Corp. of America, specifically for part numbers 10278-12L or 10278-12R. Two kits are required per dehydrator unit, and the total procurement quantity is 44,000 kits under NSN 4440-01-202-2080. Delivery must be completed within 60 days of award. The solicitation number is SPE8E9-26-Q-0670, issued on August 10, 2026, with responses due by August 17, 2026. The contract incorporates DLA packaging requirements and references the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except in specific exempted applications such as batteries, fluorescent lights, sensors, or weapons as defined by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier. The contract is subject to Covered Defense Information provisions and mandates removal of government identification from non-accepted supplies. The purchasing agency is the Department of Defense under the Construction & Equipment MRO_svc I, with Tracey Marcus designated as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 484220
New
DIBBS
Logistics and Transportation Services
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Kitting Services
Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
Domestic Raw Material Supply for Marker Production
All Other Plastics Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339940
New
DIBBS
Identification Marker Manufacturing and Supply
Office Supplies (except Paper) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
Supply of Handle, Lever Control (NSN: 1680-01-551-3869)
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541620
New
DIBBS
Safety Data Sheet (SDS) Preparation and Regulatory Compliance
Environmental Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488999
New
DIBBS
Packaging, Labeling, and Compliance Services
All Other Support Activities for Transportation

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Retaining Strap Supply (Manufacturing/Supply of Retaining Straps)
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Supply of Critical Application O-Rings
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 562920
New
DIBBS
Packaging and Hazardous Materials Compliance Services
Materials Recovery Facilities

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Precision Leaf Spring Manufacturing
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details