Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Obsolescence-Managed Component Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of twelve units of a critical electronic washer component identified by part number 265102703 and CAGE code 96169, sourced exclusively from authorized channels to ensure authenticity and performance integrity. Full obsolescence management is required throughout the procurement lifecycle, including proactive identification of aging parts, alternative sourcing strategies, and documentation of lifecycle status to prevent supply disruptions. Every unit must be fully traceable from origin to delivery, with comprehensive documentation verifying manufacturing history, test results, and chain of custody to meet stringent defense-grade standards. Quality assurance compliance is mandatory, adhering to all applicable military and industry specifications for material, workmanship, and environmental resilience. The subcontract is issued under the NAICS code 423490 by the Defense Logistics Agency on behalf of the Department of Defense, with performance anticipated to support mission-critical systems requiring zero tolerance for component failure. The contract was posted on July 16, 2026, and is managed through the DIBBS system under award number SPE4A626PY222.

General Info

Supply of twelve traceable defense-grade electronic washers, part 265102703, with full obsolescence management and strict quality compliance.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

423490 - Other Professional Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-P-Y222.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 12 units of a critical electronic washer component (PN: 265102703, CAGE: 96169) with full obsolescence management, traceability, and quality assurance compliance from authorized sources.

Similar Contracts

Same NAICS industry code

G34 -604317 - NARK II & BIGEASY GLO KITS

Solicitation # SRC0000035756

The Alabama Office of Homeland Security is soliciting bids for the procurement of law enforcement and security supplies under solicitation number SRC0000035756. The required equipment consists of five NARK II Customs/Douanes Kits, each including 50 tests and a neutralizer, as well as two Steck BigEasy GLO Kits equipped with Easy Wedges and carrying cases. This solicitation was posted on August 28, 2026, with a response deadline of September 3, 2026. The contract is managed by Jenna Andrews and pertains to performance within the state of Alabama.

G34 Office of Homeland Security

POSTED

about 22 hours ago

DEADLINE

Domestic Component Sourcing and SupplyThis subcontract, titled Domestic Component Sourcing and Supply, is issued by the Department of Defense under the ASC Supplier Oper OEM Division. The contract focuses on the procurement of electronic components that strictly adhere to the Buy American Act, the Berry Amendment, and DFARS 252.225-7001 to guarantee the domestic content of the final product. The work is categorized under NAICS code 423490 and is designated as a Total Small Business Set-Aside per FAR 19.5. The solicitation was posted on August 27, 2026, with a response deadline of September 1, 2026. Performance of the contract is located in New Cumberland, Pennsylvania. Interested parties can find further details through the provided DIBBS link for the specific request for quotation.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Commercial Off-The-Shelf (COTS) Item

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of NSN 6685008670467 (Commercial Item)

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Supply and Delivery of Commercial Item (NSN 4820015064146)

Defense Logistics Agency

POSTED

DEADLINE

Commercial Supply of Goods (General)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Commercial Supply of Government-Requested Items

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Optris PI640 Long Wave IR Camera

NASA Shared Services Center

POSTED

DEADLINE

Training Equipment and Technology Provision

Defense Contract Managment Office

POSTED

DEADLINE

NIAAA DICBR Animal Care and Use Program - Ventilated rack and air handler

Solicitation # 75N98026Q01107TECHNIPLASTPCANIAAA08817

The National Institutes of Health, through the NIAAA DICBR Program of Animal Care and Use, is seeking to acquire rodent housing and caging systems, including ventilated racks and air handlers. This equipment is essential for maintaining disease-free conditions and biosecurity for research animals at the Fishers Lane Animal Center. The systems utilize individually ventilated cages and HEPA-filtered air handling units to prevent the introduction of infectious agents and ensure the validity of scientific results. The procurement is designed to ensure compliance with the NIH Policy Manual, DHHS policies, the USDA Animal Welfare Act, and AAALACi standards. This presolicitation, identified by solicitation number 75N98026Q01107TECHNIPLASTPCANIAAA08817, is managed by the Department of Health and Human Services in Bethesda, Maryland, with a response deadline of September 5, 2026.

National Institutes Of Health Olao

POSTED

DEADLINE

Specialized Air Monitoring Equipment Supply & CalibrationThe Government of Canada, through the Department of the Environment (ECCC), is seeking a subcontractor to supply, calibrate, and maintain high-precision air monitoring instruments. The primary objective is to utilize equipment capable of detecting benzene at low concentrations, specifically 50 micrograms per cubic meter or less, with a preference for detection levels below 0.1 micrograms per cubic meter for use during field campaigns. This opportunity is categorized under NAICS code 423490 and will be performed in Quebec. Interested parties must submit their responses by the deadline of September 11, 2026.

Department of the Environment (ECCC )

POSTED

DEADLINE

Supply of Commercial Material (NSN 2940014478051)

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

REAMER, MACHINE

Solicitation # SPE8E5-26-T-3982

Solicitation SPE8E5-26-T-3982, issued by the Defense Logistics Agency Troop Support Construction and Equipment, is a request for quotations for ten machine reamers, identified by NSN 3455013740831. This acquisition is designated as a small business set-aside under NAICS code 333517. The items are classified as commercial products and are designated as critical application items. Delivery is required within five days after receipt of order, with shipping terms set as FOB Destination. The primary delivery locations include a parcel post address in the United States and a freight shipping address in Atsugi, Japan. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Palletization must comply with DLA packaging requirements RP001. Quality assurance and sampling shall be conducted according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses, including safeguarding covered defense information and the Buy American and Balance of Payments Program.

Machine Tool Manufacturing

POSTED

about 19 hours ago

DEADLINE

PRODUCTION CONTROL TES

Solicitation # SPE7L3-26-Q-1274

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE7L3-26-Q-1274 for Production Control TES, identified by part number 0001S00000114. This federal procurement opportunity is associated with purchase request 7017437763, with specific quantity requirements detailed within the solicitation documents. The solicitation was posted on August 28, 2026, and establishes a response deadline of September 11, 2026. Interested parties can access further details and submit their responses through the DIBBS portal.

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2330

This contract is for the procurement of wet charged lead acid storage batteries, specifically part number PS-12400 NB4 from Power-Sonic Corporation. The requirement consists of two line items totaling six units, governed by firm fixed pricing with a delivery timeline of 60 days after order. These are designated as critical application items with a non-extendable shelf life of six months. The agreement mandates strict adherence to DLA packaging and marking standards, including hazardous materials shipping protocols and specific sampling methods based on MIL-STD-1916 or ASQ H1331. Delivery is set as FOB destination to the USARC facility in Seagoville, Texas, and must be shipped via traceable means. All supplies must comply with mercury restrictions and hazardous communication standard notices.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

CONDENSER, REFRIGERA

Solicitation # SPE8E8-26-T-5172

Solicitation SPE8E8-26-T-5172 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office for the procurement of five refrigeration condensers, identified by NSN 4130012900526 and Carrier Corp part number 50BW500-424. The contract requires delivery within 20 days after award, with an original required delivery date of August 12, 2026. Shipping is designated as FOB Destination, with the final delivery point being the USS Frank Cable. Inspection and acceptance will also take place at the destination. The contractor must adhere to strict technical and quality standards, including RA001 and the DLA Master List of Technical and Quality Requirements. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Special environmental restrictions are in place prohibiting the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The procurement is subject to various federal regulations, including the Buy American Act, Berry Amendment, and NIST SP 800-171 for cybersecurity. Payment processing is to be handled electronically through the Wide Area WorkFlow system.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE4A6-26-Q-1360

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE4A6-26-Q-1360 for production lot testing associated with part number 0001S00000061. This federal requirement seeks a provider to perform testing services as specified in the solicitation documents, with the quantity of items to be tested detailed within the request. The solicitation was posted on August 28, 2026, and requires all responses to be submitted by the deadline of September 10, 2026. Interested parties can access further details and submit their proposals through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

INSTALLATION KIT, VEHIC

Solicitation # SPE7L1-26-Q-1443

This pre-solicitation from DLA Land and Maritime is for the procurement of 138 vehicle component installation kits under NSN 2530-016603400. The requirement is categorized under NAICS 336330 and is designated as other than full and open competition. Oshkosh Defense LLC is listed as the approved source with part number 4341939. The contract includes a 100 percent option and requires delivery within 150 days with shipping terms set as FOB Origin to multiple destinations. Proposals must be submitted in English and US dollars, preferably via the DIBBS portal or emailed to Jennifer Cummins. While pricing is a significant factor, the final award will be determined by a combination of price, delivery, and performance. The solicitation is expected to be available on DIBBS around August 17, 2026, and is governed by FAR part 12.201-1 and the Trade Agreements Act of 1979.

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2326

This contract is a solicitation from the Defense Logistics Agency for the procurement of 20 lead acid storage batteries, specifically Caterpillar Inc part number 3T-5858. The agreement is established as a firm fixed price contract with a delivery requirement of 60 days after receipt of order. Key technical requirements include strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, and a non-extendable shelf life of 12 months. Suppliers must comply with comprehensive hazardous materials regulations, including the submission of Safety Data Sheets and labels consistent with OSHA and GSA standards. The contract mandates specific sampling methods per MIL-STD-1916 or ASQ H1331 and prohibits the intentional addition of mercury compounds except where functionally required. Inspection and acceptance are conducted at the point of origin, with final shipping directed to the Vehicle Age Intermediate Depot in Cairo, Egypt.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2331

This firm fixed price contract, solicitation number SPE7L7-26-Q-2331, is for the procurement of uninterruptible power supplies, part number PS3205RM2U by Powerstar Inc. The order consists of two line items: one unit for the USS Carl Vinson and two units for the USS Makin Island. Delivery is required within 60 days after the order is placed, with inspection and acceptance occurring at the point of origin. The equipment is designated as a critical application item and includes an AGM battery with a non-extendable 18-month shelf life. Compliance with DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E, is mandatory. Shipments must be made via the fastest traceable means to the specified vessel addresses, and the contractor must adhere to specific sampling and quality assurance standards, including MIL-STD-1916 or ASQ H1331.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7L7-26-Q-2323

This contract is a firm fixed price solicitation from the Defense Logistics Agency for the procurement of three power supply units under NSN 6130-01-520-9673. The order is split into two line items, with two units destined for the USS Makin Island and one unit for the USS Kidd. Delivery is required within 60 days after order, and the items are designated as critical application items with a non-extendable shelf life of six months. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E, and requires CMMC Level 2 self-assessment for cybersecurity. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Shipping must be conducted via the fastest traceable means to the specified vessel addresses.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

BATTERY POWER SUPPLY

Solicitation # SPE7L7-26-Q-2325

This firm fixed price contract, solicitation number SPE7L7-26-Q-2325, is for the procurement of two battery power supplies, part number M359380-1, manufactured by Milpower Source Inc. The items are designated as critical application commercial items with a non-extendable Type I shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with the shipment destined for the USS Makin Island LHD 8. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, and the supplier must provide a Material Safety Data Sheet (MSDS) for shipping and labeling. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for functional use within the batteries. Inspection and acceptance will take place at the point of origin.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2329

This contract is for the procurement of Ni-Cd 7.5V 1200mAh storage batteries, identified by NSN 6140-01-557-0158. The batteries must be intrinsically safe for use around ordnance and ordnance equipment and are classified as critical application items. They carry a non-extendable shelf life of 12 months. The total requirement is split into two line items: five units for the USNS Alan Shepard and eight units for the USS Cape St George. The agreement is a firm fixed price contract with delivery required within 60 days after receipt of the order. Inspection and acceptance occur at the point of origin. The supplier must adhere to strict DLA packaging, marking, and shipping requirements for hazardous materials, including compliance with MIL-STD-129 and MIL-STD-2073-1E. Additionally, this is a restricted source item requiring government engineering source approval.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE8ES-26-Q-0098

Solicitation SPE8ES-26-Q-0098 is a firm fixed price procurement for one quart of blue enamel, identified by NSN 8010-01-143-3332 and MPI #94. The product must comply with FED-STD-595 chip code 25183 and be sourced from the Master Painters Institute Approved Products List. Delivery is required within 60 days after order, with shipping handled via Daniel F Young Inc to a military unit in Graf Ignatievo, Bulgaria. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and compliant labeling per 29 C.F.R. 1910.1200. The item is a Type II shelf-life product with a 24-month duration, requiring at least 85 percent of its shelf life to remain upon receipt. Packaging must follow MIL-STD-129 and DLA requirements to prevent leaks during transit. Additionally, the contract involves Controlled Unclassified Information and requires compliance with DFARS regulations regarding covered defense information and export controls.

Paint and Coating Manufacturing

POSTED

about 19 hours ago

DEADLINE