Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

OGDCL-SCM-LBF-CB-CESS-QP-344006272-2026 CONSTRUCTION OF PROTECTIVE WORKS POST FLOOD-2026 FOR FLOW LINE IN THE ERODED REACH AND COMPLETION OF THE REMAINING EMERGENCY PROTECTIVE WORKS POST FLOOD-2025 AT THE ERW RAISED PLATFORM, QADIRPUR, SINDH

Open

OGDC-SCM-LBF-CB-CESS-QP-344006272-2026International

Response Deadline11/27/2026, 09:30:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Oil & Gas Development Company Limited (OGDCL) has issued solicitation OGDC-SCM-LBF-CB-CESS-QP-344006272-2026 for the construction of protective works in Qadirpur, District Ghotki, Sindh, Pakistan. The project focuses on establishing protective works for a flow line in an eroded reach following the 2026 floods, as well as completing remaining emergency protective works at the ERW raised platform following the 2025 floods. The procurement is being conducted through a competitive bidding procedure in accordance with Public Procurement Regulatory Authority (PPRA) rules. The solicitation was posted on November 15, 2026, with a response deadline set for November 27, 2026. Interested parties may coordinate with the primary point of contact, Furqan Azeem, regarding the submission of proposals.

General Info

OGDCL seeks bids for protective works for flow lines in Qadirpur, Sindh.

Agency

Oil & Gas Development Company Limited (OGDCL)

NAICS

237120 - Oil and Gas Pipeline and Related Structures Construction

Place of Performance

PAK

Set-Aside

NONE

Documents

1

presolicitation

Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

Timeline

PhaseSolicitation

PostedNov 15

Sources Sought

Response DeadlineNov 27

Submission deadline

Response Deadline

11/27/2026, 09:30:00 AM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyOil & Gas Development Company Limited (OGDCL)

Contacts1 person available

OfficeN/A

Organization / AgencyOil & Gas Development Company Limited (OGDCL)

Office AddressN/A

Contacts

Full Description

Show more

CONSTRUCTION OF PROTECTIVE WORKS POST FLOOD-2026 FOR FLOW LINE IN THE ERODED REACH AND COMPLETION OF THE REMAINING EMERGENCY PROTECTIVE WORKS POST FLOOD-2025 AT THE ERW RAISED PLATFORM, QADIRPUR, SINDH

Similar Contracts

Same NAICS industry code

WH Ford RTC Fueling System Repairs, Kentucky

Solicitation # W9128F27RA054

Solicitation W9128F27RA054 is a Firm Fixed Price, Design-Build project for fueling system repairs at the W.H. Ford Regional Training Center in Greenville, Kentucky. The scope of work involves comprehensive infrastructure and electrical upgrades, including upgrading tank automatic tank gauges (ATG), repairing dispenser and offload island concrete, installing emergency fuel shut-off (EFSO) systems, and mounting leak detector probes on two diesel aboveground storage tanks. Additional requirements include providing asphalt circulation pavement, replacing canopy and fuel pipe coatings, installing splash blocks, replacing tank vents and roof penetration boot seals, providing dead man controls for truck loading, and repairing tank grounding and access platforms. All work must comply with UFC, NFPA, ASTM, and MIL-STD standards, with specific adherence to ADA and ABA accessibility guidelines. The project is a small business set-aside under NAICS code 237120, with proposals evaluated using the Lowest Price Technically Acceptable (LPTA) method. Technical acceptability is based on relevant experience, a logical three-phase Gantt chart schedule, and a well-defined construction methodology. Proposals must be submitted in two separate volumes: a technical volume and a price volume. The period of performance requires work to commence within 10 days of the Notice to Proceed, with a final completion deadline of June 18, 2027. Contractors must maintain active SAM registration and comply with various federal regulations, including the Davis-Bacon Act for labor rates and strict cybersecurity and quality control requirements.

Bristol Alliance of Companies

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Design, Build, Supply and Install, One Aviation Fuel Tank Upgrade

Solicitation # 235842

The Columbia Shuswap Regional District in British Columbia is seeking proposals for the design, build, supply, and installation of one aviation fuel tank upgrade. This solicitation, identified by number 235842, involves comprehensive infrastructure improvements to fuel storage capabilities within the province. Interested parties must submit their responses by the deadline of December 8, 2026. The project is being managed through the Province of British Columbia's procurement system, with all performance of work taking place in British Columbia, Canada.

Columbia Shuswap Regional District

POSTED

DEADLINE

Phase 2 EZ899-270648 Fuel Tank and Dispenser Replacement

Solicitation # WS5902662668

The Phase 2 EZ899-270648 Fuel Tank and Dispenser Replacement project, solicitation number WS5902662668, involves the demolition of existing fuel tanks and the installation of new tanks, fuel dispensers, and submersible turbine pumps. A critical requirement of the scope is the preservation of the existing Computrol Fuel Site Controller. This federal project is managed by the Government of Canada through the Department of Public Works and Government Services and will be performed in British Columbia, Canada. The solicitation was posted on November 13, 2026, with a response deadline of November 20, 2026. Rodnie Allison serves as the primary contracting authority for this opportunity. Interested parties can find further details through the CanadaBuys portal.

Department of Public Works and Government Services

POSTED

DEADLINE

RFP RF-32087-AS (Supply and Installation of Breakaway Couplings with Short Hosepipes at NVROs of Lahore Division)

Solicitation # Doc344059472

Solicitation RF-32087-AS, issued by the Pakistan State Oil Company Limited, seeks the supply and installation of breakaway couplings with short hosepipes at NVROs within the Lahore Division. This procurement is conducted in accordance with PPRA Clause 42 b, with all bids and tender document requests managed electronically through the SAP Ariba portal. The tender document collection period runs from November 11, 2026, to November 17, 2026, with a final bid submission deadline of 2:15 PM on November 17, 2026, followed by bid opening at 2:30 PM. To be eligible, contractors must demonstrate adequate past relevant experience and financial capabilities. Mandatory requirements include being an active tax payer and providing scanned copies of a valid NTN, GST/PST certificates, and the CNIC of the owner or authorized representative. Additionally, vendors must certify that they are not blacklisted by PSO or any other public or private entity and have not been involved in any fatal accidents during project execution within the last two years. Conditional or partial proposals, as well as those submitted after the deadline or containing false information, will be rejected.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

RFP OP-20183-SR Revival of Pipelines and Loading Pumps Areas at Machikey Terminal

Solicitation # OP-20183-SR

The Pakistan State Oil Company Ltd has issued solicitation OP-20183-SR for the revival of pipelines and loading pumps areas at the Machikey Terminal in Pakistan. This procurement project utilizes a single stage, two envelope bidding procedure, with all bid documents and submissions managed exclusively through the SAP Ariba Portal. Interested vendors must possess a valid PEC Certificate in the C-6 category or above within the relevant field of specialization and must demonstrate adequate financial capabilities and past relevant experience to be eligible for the award. The solicitation period runs from November 10, 2026, to November 20, 2026, with a final submission deadline of 2:15 PM on November 20, 2026, followed by a bid opening at 3:00 PM that same day. To participate, vendors must be registered on the SAP Ariba Portal and provide a scanned, signed, and stamped request on official letterhead to obtain the tender documents.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

SB014-27 Grayson Highway Widening

Solicitation # SB014-27

The City of Lawrenceville is soliciting competitive sealed bids for the Grayson Highway Widening project, specifically focusing on the section from Rosebud Road to Sugarloaf Parkway. The scope of work involves relocating or lowering approximately 2,000 feet of 8-inch steel pipe and 1,980 feet of 6-inch PE pipe, as well as installing 200 feet of 2-inch PE pipe. This is a line-item bid with a not-to-exceed total. The project must be substantially completed within 180 consecutive calendar days from the issuance of the Notice to Proceed, with work commencing within ten days of that notice. The contract will be awarded to the lowest responsive and responsible bidder. Bidders must submit one unbound original and one copy by 2:00 P.M. on December 10, 2026, to the Finance Office at Lawrenceville City Hall. Required submissions include a 5% bid bond, a non-collusion affidavit, a statement of bidder qualifications, and insurance certificates. The successful contractor must provide 100% performance and payment bonds from a surety with an AM Best rating of A-5 or greater. All work must meet strict City and DOT standards, including specific pressure testing for plastic and steel lines, and must be signed off by a Gas System Inspector before payment is rendered.

City of Lawrenceville

POSTED

DEADLINE

Mather Fueling System Repairs

Solicitation # PANNWD26P028176

The Mather Fueling System Repairs project, solicitation W9128F27RA045, is a design-build effort located at the Mather Army Aviation Support Facility in California. Managed by the USACE Omaha District, this firm-fixed-price contract is restricted as a total small business set-aside. The scope of work involves comprehensive repairs to AVGAS fueling systems, including the installation of sampling gauge hatches, mechanical gauges, and an automatic tank gauge system. Key construction tasks include recoating the tank exterior, replacing collision barriers, adding a full-length catwalk, and replacing audible and visual alarms. Additionally, the project requires the demolition and replacement of the POL operation building, relocation of a generator with a new concrete pad, repair of remote containment basin drainage, and various asphalt and concrete pavement replacements. The procurement utilizes the Lowest Price Technically Acceptable (LPTA) source selection method, evaluating proposals based on project experience—requiring three examples of projects exceeding 1 million dollars—and a detailed project schedule. The projected period of performance is 365 days. Contractors must comply with the Davis-Bacon Act for prevailing wages and adhere to strict regulatory standards, including UFC 3-460, OSHA, EPA, and DOT requirements. Deliverables include design documents in English units, as-built drawings, and a multi-stage inspection process consisting of punch-out, pre-final, and final acceptance inspections. Performance and payment bonds are required within 10 days of award.

W071 Endist Omaha

POSTED

DEADLINE

Fuel Facilities Upgrades and Capacity Increase

Solicitation # EV9354

The Government of the Northwest Territories, through the Department of Infrastructure, is seeking submissions from qualified contractors for fuel facility upgrades and capacity increases in Sachs Harbour and Ulukhaktok. This solicitation, identified by number EV9354, focuses on critical infrastructure improvements within the Northwest Territories to enhance fuel storage and distribution capabilities. Interested parties must submit their responses by the deadline of November 26, 2026. The procurement process has included five separate addenda issued between October 15 and November 6, 2026, which provide essential updates to the project requirements. All inquiries and submissions should be directed to the designated Contract Administrator.

Government of the Northwest Territories

POSTED

DEADLINE

Hammerman Gas/Diesel Tank Replacement Gunpowder Falls State Park

Solicitation # BPM059366

This project, solicitation BPM059366, involves the removal and replacement of above-ground gasoline and diesel fuel storage systems at the Gunpowder Falls State Park Hammerman Area in Baltimore County, Maryland. The scope of work requires the contractor to provide all labor, equipment, and materials to remove existing tanks, dispensers, piping, electronic systems, concrete pads, and bollards. Key deliverables include the installation of new storage tanks, concrete pads, and side-mount dispensers, as well as the provision of temporary gasoline and diesel tanks with metered dispensers for the duration of the project. All work must adhere to strict safety and environmental standards, including NFPA 30, 30A, and 78, API standards 650 and 620, and Maryland Department of the Environment regulations, with backfill compacted to a minimum of 95 percent. The contract is a Small Business Reserve Procurement, limiting the award to certified small businesses. The basis of award is the lowest responsive and responsible total bid. Procurement goals include a 15.00% MBE and 2.0% VSBE participation rate, with liquidated damages applicable for failure to comply with MBE requirements. The state reserves the right to apply reciprocal preference for resident bidders. Final acceptance is contingent upon the approval of the Facility Manager and DNR Project Engineer, requiring the submission of an approved electrical inspection certificate, a disposal manifest for contaminated soils and equipment, and three sets of manufacturer manuals and as-built drawings. Invoices are to be submitted to the Maryland Department of Natural Resources in Annapolis, with payments typically issued within 30 days of receipt of a proper invoice.

POSTED

DEADLINE

in about 1 month

Publication - 100024987-26-33 - Dry Terrain - Coating Refurbishment Work on 20 KMs length of KMK Pipeline Sec III-IV

Solicitation # Doc343325638

Pak-Arab Refinery Limited has issued a sources-sought solicitation, identified by number Doc343325638, for coating refurbishment work on a 20 kilometer stretch of the KMK Pipeline Section III-IV. This project focuses on dry terrain maintenance and is located within Pakistan. The publication was posted on November 5, 2026, with a response deadline set for November 17, 2026. Interested parties can coordinate through the primary point of contact at [email hidden] or access further details via the provided Ariba portal link.

Pak-Arab Refinery Limited

POSTED

DEADLINE

Publication - 6000015179-26-32 - Water Logged - Coating Refurbishment Work on 10 KMs length of KMK Pipeline Sec II

Solicitation # Doc343322735

Pak-Arab Refinery Limited is seeking sources for coating refurbishment work on a 10 kilometer section of the KMK Pipeline Sec II in Pakistan. This sources-sought publication, identified by solicitation number Doc343322735, focuses on addressing water logged areas to ensure the integrity of the pipeline infrastructure. The solicitation was posted on November 5, 2026, with a response deadline set for November 17, 2026. Interested parties can coordinate through the primary point of contact at the provided agency email or access further details via the official Ariba portal link.

Pak-Arab Refinery Limited

POSTED

DEADLINE

WH Ford RTC Fueling System Repairs

Solicitation # W9128F27RA054

Solicitation W9128F27RA054 is a design-build, firm-fixed-price contract for fueling system repairs at the W.H. Ford Regional Training Center in Kentucky, managed by the US Army Corps of Engineers, Omaha District. This project is a total set-aside restricted to 100% small businesses under NAICS code 237120. The scope of work involves comprehensive upgrades to two 10,000-gallon above-ground storage tanks, including the installation of an emergency fuel shutoff station, leak detection equipment, and an upgraded automatic tank gauging system. Additional requirements include repairing concrete and pavement, recoating fuel system canopies and piping, replacing tank vents, and improving grounding systems and equipment access platforms. All work must adhere to EM 385-1-1 safety standards, as well as IBC, NFPA, and ADA accessibility guidelines. Proposals must be submitted electronically in two separate volumes: a technical volume covering specialized experience, a Gantt chart for the project schedule, and a technical approach, and a separate pricing volume. The government will utilize the Lowest Price Technically Acceptable (LPTA) source selection process to award the contract. The proposal submission deadline has been extended to December 21, 2026, at 14:00 CST. Once awarded, the contractor must commence work within 10 days of the Notice to Proceed, with a final completion deadline of June 18, 2027. Compliance with the Davis-Bacon Act and Buy American requirements is mandatory.

W071 Endist Omaha

POSTED

DEADLINE

in about 1 month

More opportunities from Oil & Gas Development Company Limited (OGDCL)

Same awarding agency

Solicitation # Doc342964580

The Oil & Gas Development Company Limited (OGDCL) is seeking sources for the procurement of lubricant, Ad-Blue, and coolant. This sources-sought opportunity, identified by solicitation number Doc342964580, is intended to identify capable suppliers for these essential automotive and industrial fluids. The place of performance for this contract is located in Pakistan. The solicitation was posted on November 15, 2026, with a response deadline set for November 30, 2026. Interested parties can coordinate through the primary point of contact, Nokhaiz Saadi, via the provided email address or through the official Ariba procurement portal. While specific evaluation factors, pricing tables, and detailed statements of work were not provided in the initial documentation, the primary objective remains the acquisition of high-quality lubricants and cooling agents to support OGDCL operations.

POSTED

about 2 hours ago

DEADLINE

Solicitation # Doc343860921

POSTED

about 3 hours ago

DEADLINE

Ready-Mix Concrete and Aggregate Supply

Ready-Mix Concrete Manufacturing

POSTED

about 8 hours ago

DEADLINE

Soil Stabilization and Erosion Control

All Other Specialty Trade Contractors

POSTED

about 8 hours ago

DEADLINE

Civil Construction and Earthworks

Other Heavy and Civil Engineering Construction

POSTED

about 8 hours ago

DEADLINE

Certified Welding Inspector (CWI) / Visual TestingThis subcontract involves providing Certified Welding Inspector (CWI) and Visual Testing services for prime contractors operating on Oil & Gas Development Company Limited (OGDCL) projects in Pakistan. The scope of work focuses on the visual assessment of weld quality, geometry, and structural integrity, encompassing both pre-weld and post-weld inspections. Technicians are required to use precision calipers and weld gauges to measure weld beads and must deliver comprehensive Visual Inspection Reports and weld acceptance logs. To qualify for this engagement, personnel must hold an AWS Certified Welding Inspector (CWI) or CSWIP 3.1 certification. The opportunity was posted on November 14, 2026, with a response deadline of December 1, 2026. The services fall under NAICS code 541380, ensuring specialized technical oversight for critical infrastructure components within the oil and gas sector.

Testing Laboratories and Services

POSTED

DEADLINE

Surface Inspection Specialist (MT/PT)This subcontract for a Surface Inspection Specialist involves performing surface-level flaw detection for prime contractors on projects managed by the Oil & Gas Development Company Limited in Pakistan. The scope of work focuses on identifying surface cracks and porosity through the application of magnetic particle testing and liquid penetrant testing, utilizing specialized equipment such as magnetic yokes, AC/DC current sources, and penetrant kits. Qualified candidates must hold ASNT Level II or ISO 9712 certifications in both Magnetic Particle and Liquid Penetrant Testing. The primary deliverable for this engagement is a detailed surface inspection report that includes a comprehensive map of all identified indications. Interested parties must respond by December 1, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Ultrasonic Testing (UT) SpecialistThis subcontract opportunity is for an Ultrasonic Testing (UT) Specialist to provide thickness gauging and volumetric inspection services for prime contractors on Oil & Gas Development Company Limited (OGDCL) projects in Pakistan. The scope of work involves conducting pulse-echo testing, shear wave inspection for weld integrity, and wall thickness measurements utilizing ultrasonic flaw detectors, transducers, and couplant gels. The selected provider will be responsible for delivering detailed UT scan reports and comprehensive thickness mapping data. Qualified candidates must hold ASNT Level II or ISO 9712 certification in Ultrasonic Testing. The solicitation was posted on November 14, 2026, with a response deadline of December 1, 2026. This requirement falls under NAICS code 541380 and is specifically tailored for technical inspection services within the oil and gas sector.

Testing Laboratories and Services

POSTED

DEADLINE

Radiographic Testing (RT) SpecialistThis subcontract for a Radiographic Testing Specialist involves performing internal inspections of welds, pipes, and castings for prime contractors on projects managed by the Oil & Gas Development Company Limited in Pakistan. The scope of work includes setting up radioactive sources, exposing weld joints, developing film, and interpreting radiographs using X-ray machines and Gamma-ray isotopes such as Iridium-192. The selected provider is responsible for delivering all radiographic films and formal inspection reports. To qualify for this role, personnel must hold ASNT Level II or ISO 9712 certification in Radiographic Testing, along with a Radiation Safety Officer certification. The solicitation was posted on November 14, 2026, with a response deadline of December 1, 2026. This opportunity falls under NAICS code 541380.

Testing Laboratories and Services

POSTED

DEADLINE

OGDC-SCM-SERVICES-CB-PEnFD-343220120-2026 Hiring of NDT Services

Solicitation # OGDC-SCM-SERVICES-CB-PENFD-343220120-2026

The Oil & Gas Development Company Limited (OGDCL) is soliciting bids for the hiring of Non-Destructive Testing (NDT) services under solicitation number OGDC-SCM-SERVICES-CB-PENFD-343220120-2026. This procurement is managed by the General Manager of Supply Chain Management at the OGDC Headquarters in Islamabad, Pakistan, with the place of performance located within Pakistan. Interested parties must submit their e-bids through the SAP-Ariba Discovery portal by the deadline of December 1, 2026, at 1430 hours. Bids will be opened 30 minutes after the closing deadline. The primary point of contact for this solicitation is Ayesha Ahmad.

Testing Laboratories and Services

POSTED

DEADLINE

Valve Repair and Maintenance ServicesThis subcontract for Valve Repair and Maintenance Services involves providing specialized repair, maintenance, and servicing of industrial valves for prime contractors operating on Oil and Gas Development Company Limited projects at the Dakhni Field in Pakistan. The scope of work includes the disassembly, inspection, and repair of valves utilizing specialized tooling and pressure testing equipment to ensure all components meet API standards for operational integrity. The service provider is responsible for delivering fully repaired and operational valves and ensuring their successful installation at the Dakhni Field. Interested parties must note that the response deadline for this opportunity is November 30, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

OGDC-SCM-SERVICES-CB-PEnFD-342896759-2026 Hiring of Services for Valve Repair at Dakhni Field

Solicitation # OGDC-SCM-SERVICES-CB-PENFD-342896759-2026

Oil & Gas Development Company Limited (OGDCL) has issued solicitation OGDC-SCM-SERVICES-CB-PENFD-342896759-2026 for the hiring of professional services dedicated to valve repair at the Dakhni Field. The project is located in Jand, District Attock, Punjab, Pakistan. This procurement process is managed by the General Manager of Supply Chain Management at the OGDC Headquarters in Islamabad. Interested parties must submit their e-bids through the SAP-Ariba Discovery portal. The solicitation was posted on November 14, 2026, with a formal response deadline set for November 30, 2026, at 1430 hours. Primary contact for this requirement is Ayesha Ahmad.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS