Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Government of Canada was posted on June 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

On-Site Assembly, Commissioning, and Training

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238990
New
SLED
25-287580.FMD.RollUpDoorMaintenance
Solicitation # CR-25-287580
The California Department of General Services, Facilities Management Division, is soliciting bids for roll-up door maintenance and repair services for state properties in Sacramento, specifically targeting buildings 049, 051, and 053. The scope of work includes annual preventive maintenance, such as cleaning debris, lubricating gear and chain sprockets, and adjusting spring tension, as well as providing technical support and performing both foreseeable and unforeseeable repairs. All services must be performed by Cookson Trained and Certified Service Technicians in accordance with the California Building Standards Code (Title 24). The contract requires the provider to maintain a valid Class D-28 Doors, Gates, and Activated Devices license and be registered with the Department of Industrial Relations. The contract will be awarded to the lowest responsive responsible bidder, with a 5% preference applied to Small Businesses and specific incentives for Disabled Veteran Business Enterprises, who must meet a 3% participation goal. Bidders must have a physical service location within 50 miles of 1616 Capitol Avenue, Sacramento. Key contractual terms include a one-year unconditional warranty from the date of work acceptance and adherence to August 2026 prevailing wage rates. Bids must be submitted in sealed physical format by November 23, 2026, at 2:00 p.m. PT. The solicitation also mandates compliance with the Darfur Contracting Act, the Iran Contracting Act, and Executive Order N-6-22 regarding Russia sanctions.
California Department of General Services

POSTED

about 9 hours ago

DEADLINE

in 20 days

AI Contract Overview

Show more

The contract requires the on-site assembly of the Wind Wall System, completion of commissioning tests to ensure full functionality, and the delivery of comprehensive operational and maintenance training to personnel from the National Research Council of Canada. All work must be performed at the designated location in Canada, with no specified city or regional details provided beyond the national boundary. The contractor is expected to meet all technical and procedural requirements for system installation and testing, followed by effective knowledge transfer to ensure NRC staff can independently operate and maintain the system. The contract is classified as a subcontract under NAICS code 238990 and is open for responses until June 30, 2026, with a posted date of June 9, 2026. The procuring agency is the Government of Canada through the National Research Council of Canada, and the opportunity is accessible via the Canada Buys portal.

General Info

On-site Wind Wall assembly, commissioning, and NRC personnel training under Canadian subcontract, deadline June 2026.

Documents

This scope was carved out of 26-58018.

The full solicitation package (25 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

26-58018 Laboratory Wind Wall System, Question and Answer #3

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Assemble the Wind Wall System on-site, conduct commissioning tests, and deliver operational and maintenance training to NRC personnel.

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 541330
New
International
M55 Commissioning and Integrated Systems Testing
Solicitation # 26-58146
The National Research Council Canada requires commissioning and integrated systems testing services for new and existing equipment and systems at building M55 in Ottawa as part of the Office Accommodations Project. This solicitation, number 26-58146, replaces a previous solicitation and mandates the hiring of an independent third-party Commissioning Agent to manage the process from the design phase through construction completion and project close-out. The scope of work includes construction documentation, services during the tender and construction phases, and post-construction close-out, with a final completion deadline of March 31, 2028. Key deliverables include a comprehensive commissioning plan, the execution of pre-operational reviews, and the provision of certified training for operation and maintenance staff to ensure systems are safe, reliable, and efficient prior to occupancy. To be declared compliant, offerors must demonstrate specific experience, including acting as a Commissioning Service Provider on two separate building construction projects per CSA Z320-11 and serving as an Integrated Testing Coordinator on at least one project with a minimum construction value of 5 million dollars and 500,000 dollars in mechanical work. The contract includes a one-year anticipated warranty and post-occupancy commissioning period. Award selection is based on the lowest responsive bid among compliant offers. Administrative requirements include strict security clearances managed by a Company Security Officer, adherence to NRC documentation and deliverables manuals, and a payment structure where progress payments are made within 30 calendar days of receiving an acceptable invoice.
Engineering Services

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 238220
New
International
Ammonia Screw Compressor #2 Replacement Project
Solicitation # 26-58173
The National Research Council Canada is soliciting bids for the Ammonia Screw Compressor #2 Replacement Project at building M-10, located at 1 Arctic Ave in St. John's, Newfoundland and Labrador. This construction services contract, identified by solicitation number 26-58173, involves the safe removal and installation of an ammonia compressor, including all necessary rigging, lifting equipment, and the restoration of any damaged paint coatings. The project has an estimated value of $500,000 or less. Key deliverables include the provision of operational spares such as three oil filters, one oil separator chamber gasket, four drums of Star C refrigeration oil, and a complete set of coalescer filters. Bidders must have attended mandatory site visits on October 27 or 28, 2026, and must submit their total bid amount via email to the NRC Bid Receiving Unit by November 9, 2026, at 2:00 PM ET. Submissions must adhere to strict email size limits of 10 MB and cannot include ZIP files. The resulting contract will be subject to the Federal Prompt Payment for Construction Work Act and requires the contractor to maintain commercial general liability insurance for six years following substantial completion. Performance will be evaluated based on quality of workmanship, timing, project and contract management, and health and safety, with each criterion weighted at 20 points. All work must comply with the National Building and Fire Codes, the Canadian Electrical and Plumbing Codes, and CSA standards B51 and B52.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 238160
New
International
Roof Replacement Building M-20
Solicitation # 26-58140
Solicitation 26-58140 is an invitation to tender issued by the National Research Council Canada for the replacement of various roof areas at Building M-20, located at 1200 Montreal Road in Ottawa, Ontario. The project requires the supply and installation of roofing systems according to detailed technical plans, with a performance period of seven weeks and a final completion deadline of July 30, 2027. Mandatory site visits were scheduled for October 6 and 7, 2026. The contract is subject to the Federal Prompt Payment for Construction Work Act, ensuring payment within 28 calendar days of a proper invoice. Qualified bidders must be members in good standing of the Ontario Industrial Roofing Contractors Association or the Canadian Roofing Association. Submission requirements include bid security, a bid and acceptance form, integrity verification, and certifications regarding Canadian materials and reciprocal procurement. Personnel working inside the building must possess Reliability Status security clearance. The contractor is required to maintain a Wrap-Up General Liability insurance policy with minimum limits of 5,000,000 dollars for both each occurrence and completed operations. Additionally, the project mandates a strict waste management plan aiming for a 90 percent recycling or salvage rate and adherence to WHMIS standards for hazardous materials.
Roofing Contractors

POSTED

1 day ago

DEADLINE

in about 10 hours
View Details
NAICS: 334516
New
International
Benchtop Multiple Reactor Systems
Solicitation # 26-58202
The National Research Council Canada is soliciting proposals under solicitation number 26-58202 for the procurement, delivery, installation, and training of two benchtop multiple reactor systems for the Clean Energy Innovation Research Center. These systems will support the Critical Battery Materials Initiative by providing real-time chemical monitoring of hydrometallurgical and crystallization processes. The first system must feature integrated sampling automation compatible with a self-driving acceleration platform, while the second requires at least 16 reactors with a minimum volume of 0.5 mL and materials compatible with a pH range of 0 to 12. Both systems must support overhead stirring speeds of 1250 RPM or higher, independent temperature controls from -10 to 150 degrees Celsius, and provide a documented SDK or API supporting Python for automation. The procurement is an open tender available to Canadian suppliers and those from applicable trading partners under reciprocal procurement policies. The contract will be awarded to the compliant offer with the lowest evaluated price, provided it meets all mandatory technical criteria and the Canadian Electrical Code Part 1. Deliveries are to be made on a DAP Mississauga Ontario Incoterms 2020 basis, with an expected delivery window of eight weeks from the contract award. Proposals must be submitted in separate technical, financial, and certification volumes by November 24, 2026, at 2:00 PM EST. All packaging must meet environmentally preferable specifications, and the successful contractor must adhere to the NRC Integrity Regime and specific safety protocols during on-site installation at the Mississauga location.
Analytical Laboratory Instrument Manufacturing

POSTED

2 days ago

DEADLINE

in 20 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS