Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Defense was posted on April 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

On-Site Equipment Installation & Commissioning

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238990
New
SLED
IFB No. 132406 Fence Repair and Replacement, El Centro Armory
Solicitation # 132406
The California Military Department has issued Invitation for Bid No. 132406 for the repair and replacement of a vehicle-collision-damaged entry control fence at the El Centro Armory in El Centro, California. The project requires the contractor to remove damaged concrete footings, chain-link fabric, posts, and hardware, and install matching replacement components that mirror the existing system's height, material, gauge, and security features. All work must be completed within 180 calendar days, with physical construction beginning within 14 days of the Notice to Proceed. The award will be granted to the lowest responsive responsible bidder, with a bid verification meeting potentially required to confirm pricing and scope understanding. Eligible bidders must possess a valid California C-13 Fencing Contractor license and adhere to State General Prevailing Wage Rates, OSHA requirements, and the California Building Code. Bonding is required based on contract value: bid bonds for amounts exceeding 24,999.99 dollars, performance bonds for amounts over 9,999.99 dollars if progress payments are made, and payment bonds for public works expenditures exceeding 24,999.99 dollars. Bids must be submitted as a single PDF via email to PWC@cmd.ca.gov by October 8, 2026, at 2:00 PM, with the subject line containing the IFB number, project title, and business name. Key deliverables include material submittals and a project schedule due five days after the Notice to Proceed, and final project closeout documents upon completion.
California Military Department

POSTED

about 20 hours ago

DEADLINE

in 26 days
NAICS: 238990
New
SLED
GARDEN FENCING INSTALLATION
Solicitation # Q27000396
The Hawaii Department of Health is seeking a contractor for the purchase and installation of approximately 1,700 feet of pig and hog proof fencing to enclose a garden area at the Hawaii State Hospital in Kaneohe, Hawaii. The project requires the installation of seven-foot galvanized T-posts, double-dipped galvanized 1348 hog fence fabric, and specific boss and gate posts set in concrete. The scope includes a 12-foot total gate opening consisting of two six-foot wide gates made of galvanized Schedule 40 pipe and wire mesh. Performance is scheduled from October 1, 2026, through January 30, 2027, with a maximum work duration of ten business days. Work must be performed between 7:30 am and 3:00 pm, Monday through Friday. Award will be granted to the lowest responsible and responsive offeror. Mandatory requirements for bidders include attendance at a site walkthrough on September 15, 2026, registration to do business in the State of Hawaii, and the submission of a Certificate of Vendor Compliance via HIePRO. Contractors must maintain general liability insurance of at least 1 million dollars per occurrence and 2 million dollars aggregate, as well as 1 million dollars in automobile insurance. Required submittals include Offer Form OF-1 and a liability license. Payment is contingent upon the submission of original invoices and the procurement of tax clearance certificates from the State of Hawaii and the Internal Revenue Service.
Department of Health

POSTED

about 20 hours ago

DEADLINE

in 13 days

AI Contract Overview

Show more

This contract involves the delivery, unloading, installation, alignment, utility hookups, and commissioning of a CNC plasma cutting table at the ERDC facility. It is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, targeting small business participation. The solicitation was posted on April 20, 2026, with a response deadline of May 8, 2026, at 5:00 PM. The contract falls under the NAICS code 238990, which relates to specialized trade contractors. The Department of Defense, through the W2R2 USA Engineering Research & Development Center, is the awarding agency. The place of performance is identified by the zip code 39180, although specific city and state details are not provided. This contract requires comprehensive on-site equipment services to ensure the plasma cutting table is fully operational upon completion.

General Info

Delivery, installation, and commissioning of CNC plasma cutter at ERDC; small business subcontract, due May 8, 2026.

Agency

Department Of Defense → W2R2 USA Engr R & D CtrView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

MS, 39180, USA

Set-Aside

SBA

Documents

This scope was carved out of W912HZ26RS9650.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ISD Plasma Cutter

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W2R2 USA Engr R & D Ctr
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W2R2 USA Engr R & D Ctr
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Delivery, unloading, installation, alignment, utility hookups, and commissioning of the CNC plasma cutting table at the ERDC facility.

More opportunities from Department Of Defense → W2R2 USA Engr R & D Ctr

Same awarding agency

NAICS: 334516
New
Federal
Supply of ASBpro ID Handheld Asbestos Detectors
Solicitation # W912HZ26QA058
Solicitation W912HZ26QA058 is a firm fixed price request for quote issued by the Department of Defense for the USACE Engineering Research and Development Center to procure nine ASBpro ID Handheld Asbestos Detectors. This procurement is a total small business set-aside under NAICS 334516. The ASBpro ID is specified as a brand-name requirement because it is the only system that provides 100 percent technical and operational interchangeability with existing UROC ETEO kits, ensuring mission success for expeditionary teams in remote environments. Each unit must include a handheld scanner, controller and software, charger and cables, a belt holster and carrying case, and a 12-month warranty. The devices must utilize Near-Infrared spectroscopy to identify all six regulated asbestos types in under ten seconds. The government will award the contract to the responsible Lowest Price Technically Acceptable offeror who can provide the specified equipment and deliver it to Vicksburg, Mississippi, no later than 45 days after receipt of order. The period of performance is scheduled from September 21, 2026, to November 2, 2026. Offerors must have an active registration in the System for Award Management and submit their quotes electronically by September 17, 2026. Key administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DoD item unique identification standards per MIL-STD-130 and MIL-STD-129.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 541940
New
Federal
ERDC Environmental Laboratory Animal Care and Use Program Attending Veterinarian
Solicitation # W912HZ26Q1CJC
The U.S. Army Engineer Research and Development Center Environmental Laboratory is seeking a qualified Attending Veterinarian to provide non-personal veterinary support for its Animal Care and Use Program. This small business set-aside is a firm-fixed-price contract consisting of one base year and four option years, with performance expected to begin on or before September 30. The selected contractor will serve as an independent, non-voting technical advisor to the Institutional Animal Care and Use Committee to ensure regulatory compliance with the Animal Welfare Act, DOD Instruction 3216.01, and standards set by ACURO and AAALAC. Key responsibilities include attending all scheduled IACUC meetings, conducting semi-annual facility inspections and program reviews, providing emergency clinical guidance, and offering on-site support during external accreditation inspections. The contractor must be licensed to practice in the State of Mississippi at the time of proposal submission and maintain a base of operations within 200 miles of Vicksburg, Mississippi, to ensure rapid emergency response. Deliverables include inspection and review reports due within 10 days of an event, emergency response reports within 5 days, and quarterly meeting reports within 10 days. Performance will be monitored via a Quality Assurance Surveillance Plan, with ratings based on the completion percentage of deliverables. Additionally, the contractor must comply with EM 385-1-1 safety standards, E-Verify employment eligibility requirements, and standard Department of Defense security training and force protection measures. Award will be granted to the responsible offeror with the lowest priced technically acceptable quote.
Veterinary Services

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 541512
New
Federal
Post Industry Day Notice HITS-UIII
Solicitation # PANERD25P0000_001596
The High Performance Computing Modernization Program (HPCMP) Integrative Technical Services-Unrestricted III (HITS-UIII) is a pre-solicitation effort managed by the W2R2 USA Engineer Research and Development Center for the Department of Defense. The program aims to establish an Indefinite Delivery Indefinite Quantity (IDIQ) hybrid SATOC vehicle with a five-year ordering period to provide comprehensive technical services for various Defense Supercomputing Resource Centers (DSRCs), including those for the Army Research Laboratory, Air Force Research Laboratory, Navy, and ERDC. The scope of work encompasses 24/7 operational support, system integration, network and database administration, cybersecurity compliance, and facilities engineering to maintain unclassified and classified high-performance computing capabilities. The contracting strategy involves a best-value trade-off evaluation and a hybrid pricing structure, utilizing Firm Fixed Price for labor and Cost Reimbursement for non-labor components. Stringent security requirements are mandatory, including a Top Secret Facility Clearance for the prime contractor and a minimum of Secret clearance for all personnel, with specific roles requiring Special Security Background Investigations. Additionally, contractors must comply with CMMC Level 2 and the EM 385-1-1 Safety and Occupational Health Requirements Manual. Interested vendors are directed to submit inquiries through the ProjNet system using the specified bidder key to engage with the government during this pre-solicitation and Industry Day phase.
Computer Systems Design Services

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
Federal
Arkabutla Outlet Works Physical Model Supplies
Solicitation # W912HZ26QA044
The U.S. Army Engineer Research and Development Center, Coastal Hydraulics Laboratory, is soliciting quotes under solicitation W912HZ26QA044 for the procurement of supplies required to fabricate a scaled physical model of the new outlet works at Arkabutla Dam. This effort is critical for analyzing a new design to replace an existing structure nearing failure. The requirement includes a wide array of brand-name or equal materials, such as foam, acrylics, adhesives, sealants, and specialized tools from brands including 3M, Sika, and Milwaukee, to support a proprietary patented modeling process. This acquisition is a total set-aside for small businesses and will be awarded as a single firm-fixed-price purchase order to the responsible offeror who provides the lowest priced technically acceptable quote. Offers must include detailed technical descriptions or product literature to demonstrate compliance with the specifications outlined in the Description of Requirement. The government will evaluate offers based on best value using FAR Part 12 procedures, considering both price and technical acceptability. Delivery is required within 30 calendar days of award to the Waterways Experiment Station in Vicksburg, Mississippi, with shipping and transportation costs borne by the contractor. All items must adhere to DoD unique identification and marking standards per MIL-STD-130 and MIL-STD-129. Offerors must be registered in the System for Award Management and submit their quotes electronically to the designated point of contact by the specified deadline.
Hardware Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS