Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

On-Site Installation and Technical Training Services

Active

Federal

Response Deadline08/06/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the on-site installation of high-power vacuum tubes at the National Institute of Standards and Technology facility in Boulder, Colorado, with a zip code of 80305. This is a subcontract under the NAICS code 611430, which pertains to professional and technical training. The work must be performed at the specified location and includes not only the physical installation of the equipment but also the delivery of comprehensive hands-on technical training to NIST staff. The training focuses on the operational use, routine maintenance, and critical safety procedures required to handle the high-power vacuum tubes effectively and safely. The solicitation was posted on August 3, 2026, with a response deadline of August 6, 2026, indicating a tight timeline for interested parties to submit proposals. The contracting entity is the Department of Commerce through its NIST office, and the work is intended to enhance the technical capabilities of NIST personnel by integrating advanced equipment with proper expertise. All activities are expected to be completed in accordance with federal standards and facility protocols, ensuring minimal disruption to NIST’s ongoing research activities while maximizing operational readiness and safety compliance.

General Info

Install high-power vacuum tubes and train NIST staff in Boulder, Colorado, under NAICS 611430.

Agency

Department Of Commerce NistView Agency

NAICS

611430 - Professional and Management Development TrainingView NAICS

Place of Performance

Boulder, CO, 80305, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 11:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce Nist

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Commerce Nist

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site installation of high-power vacuum tubes and delivery of hands-on technical training for NIST staff on operations, maintenance, and safety procedures.

Similar Contracts

Same NAICS industry code

TACLANE C-175N Encryptor Training InstructionA subcontract is being issued to deliver a 10-person training class within the contiguous United States focused on the use, configuration, and maintenance of NSA-certified TACLANE C-175N encryptors specifically for SECRET-classified Unmanned Surface Vehicle data links. The training must be conducted in Bethesda, Maryland, at a location with appropriate security protocols to handle classified material, and is intended for personnel requiring hands-on proficiency with these secure communications devices. The solicitation was posted on August 4, 2026, with a response deadline of August 10, 2026, and falls under NAICS code 611430 for other computer and electronic product manufacturing support services. The contracting entity is the Naval Surface Warfare Center, Carderock Division, a branch of the Department of Defense, and the work must be performed in compliance with all applicable national security and classified information handling standards.

POSTED

about 15 hours ago

DEADLINE

Technical Training for Motion Capture System

NASA Shared Services Center

POSTED

about 15 hours ago

DEADLINE

Technical Training Development and Delivery

W7NF Uspfo Activity Mi Arng

POSTED

about 15 hours ago

DEADLINE

Technical Training Delivery

FA8126 Afsc Pzimb

POSTED

about 15 hours ago

DEADLINE

On-Site Training ServicesThe contract requires the provision of on-site training for laboratory personnel focused on the operation, software utilization, routine maintenance, quality control procedures, and troubleshooting of new PCR systems. Training must be delivered directly at the designated location in Durham, North Carolina, with a zip code of 27705, ensuring hands-on and practical instruction tailored to the specific equipment and workflows of the facility. The training services are intended to build competency among lab staff to independently manage and maintain the PCR systems effectively and in compliance with required standards. This is a subcontract solicitation under NAICS code 611430, issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6 (36C246). The opportunity was posted on August 4, 2026, with a response deadline of August 12, 2026, at 2:00 PM. The contract does not have a specified set-aside designation, and no point of contact information is provided. The work must be performed on-site at the location in Durham, and no other locations are indicated for performance.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 15 hours ago

DEADLINE

Professional Development and Training Services for Law Enforcement Intelligence Analysts

POSTED

about 15 hours ago

DEADLINE

MARCORSYSCOM Mentor Program

Solicitation # M67854-27-Q-0500

The contract titled MARCORSYSCOM Mentor Program, solicited under number M67854-27-Q-0500, is a non-personal service agreement aimed at delivering a comprehensive mentorship initiative aligned with the Marine Corps Systems Command’s Human Capital Management goals. The program is designed to advance professional development, strengthen leadership capabilities, and facilitate the transfer of institutional knowledge among Marine Corps personnel. The solicitation is set aside exclusively for SBA-certified Women-Owned Small Businesses under the WOSB Program, as outlined in FAR 19.15, with the NAICS code 611430 indicating it falls under Educational Support Services. The performance location is in Quantico, Virginia, with the office address listed at 22134-6050. The contracting officer is the Department of Defense, specifically under the Commander’s office. Questions regarding the solicitation must be submitted by 3:00 PM Eastern Time on Thursday, 6 August 2026, and the deadline for quotation submissions has been extended to 10:00 AM Eastern Time on Thursday, 20 August 2026. The primary point of contact is Mark Sanderson, reachable at mark.sanderson@usmc.mil, with Alexandra Diviney serving as the secondary contact at alexandra.diviney@usmc.mil. The solicitation is classified as a combined solicitation and is posted on SAM.gov with the UI link provided for further details and access to updated attachments reflecting the revised timeline.

POSTED

about 15 hours ago

DEADLINE

U009--VISN EHS GEMS Training

Solicitation # 36C25926Q0706

This contract seeks to procure Healthcare Environmental Regulatory Compliance (HERC) Green Environmental Management System (GEMS) training services under a firm-fixed price Purchase Order issued by the Department of Veterans Affairs, Network Contracting Office 19, as a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside. The requirement is for a single 2- to 3-day virtual training course designed for up to 15 participants, with a base performance period running from September 1, 2026, to August 31, 2027, and a potential total contract duration extending through August 31, 2031, through optional one- to six-month extensions not to exceed six months total. The place of performance is virtual, centered around VISN 19’s Rocky Mountain Network Offices in Glendale, Colorado, with delivery terms specified as FOB Destination. Offerors must comply with strict SDVOSB eligibility criteria, including verification of their status in the SBA Small Business Certification database and adherence to limitations on subcontracting, which prohibit paying more than 50% of the contract value to non-certified entities, excluding certain direct costs such as cloud services or travel. The solicitation mandates submission of four distinct volumes: a capability statement capped at eight pages, a completed price schedule, three relevant past performance references, and a certified compliance document for subcontracting limitations, all due by 10:00 a.m. Mountain Time on August 14, 2026, via email to the designated contracting specialist. Evaluation will proceed through a pass/fail gate process assessing responsibility, price reasonableness, capability, and past performance, followed by a side-by-side pairwise comparison of compliant quotations to determine the most advantageous offer based on price and other factors, with no numeric weights assigned to the evaluation criteria. The government retains the right to select a quotation other than the lowest priced if it offers superior overall value. The contract incorporates several FAR and VAAR clauses with deviations, including those addressing sustainable products, security prohibitions, DEI discrimination, and technical industry standards tied to CERCLA, RCRA, OSHA, and EPA compliance, all requiring proof of adherence. Invoicing must be submitted electronically in accordance with VAAR 852.232-72 and must include all elements required by 5 CFR part 1315.9(b), with payments processed through the VA Financial Service Center in Austin, Texas.

Network Contract Office 19 (36C259)

POSTED

about 15 hours ago

DEADLINE

INARNG Leadership Development Support Service

Solicitation # W912L9-26-Q-9005

The U.S. Army National Guard is seeking qualified small businesses to provide a Junior Leadership Development Training Program for the Recruiting and Retention Battalion in Indiana under a firm-fixed-price contract. This full small business set-aside solicitation requires contractors to deliver a comprehensive curriculum-based training initiative including curriculum development, quarterly in-person sessions, and monthly virtual meetings over a base year and two optional years, spanning from September 2026 through September 2029. The work must comply with the attached Performance Work Statement and is to be performed primarily in Indianapolis, Indiana. Proposals must include a technical approach detailing the contractor’s methodology, evidence of past performance in similar leadership development programs, and a detailed price breakdown for each contract line item. All submissions must be sent via email by the deadline and include required administrative details such as the company name, address, CAGE code, UEI, and discount terms. Offers are due by 4:00 PM Eastern Time on August 14, 2026, with all questions required to be submitted by August 7, 2026. The government will award the contract based on best value, evaluating technical capability, past performance, and price using criteria outlined in the supplemental evaluation document. Only small businesses are eligible to compete, and the solicitation is issued as a combined synopsis and RFQ under FAR Subpart 12.6, meaning no formal written solicitation will be issued. Proposals must be submitted to Brian Williams, the contracting specialist, via email, with no formatting requirements beyond the inclusion of all mandatory components. All performance will be measured against defined standards in the PWS, and the contractor is responsible for providing all personnel, equipment, tools, and quality control necessary for successful implementation.

W7M7 Uspfo Activity In Arng

POSTED

about 15 hours ago

DEADLINE

Solicitation # W911S226U3923

The contract titled Pearson e-book is issued under solicitation number W911S26U3923 by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a zip code of 13602-5220. It was posted on August 4, 2026, and responses are due by August 11, 2026, at 2:15 PM ET. The contract is classified as a combined solicitation under the NAICS code 611430, which corresponds to other schools and instruction, and there is no set-aside designation specified. The place of performance is listed with a zip code of 40121, though the city and state are not provided. Violet Roberts serves as the primary point of contact, reachable via email at violet.b.roberts.civ@army.mil or by phone at 5026246562. Additional details and the official solicitation can be accessed through the provided SAM.gov link.

W6QM Micc-Ft Drum

POSTED

about 15 hours ago

DEADLINE

QCM System Installation and Training ServicesThe contract entails the provision of comprehensive training and technical support for the operation, calibration, and maintenance of a QCM system, encompassing full setup and commissioning services to ensure optimal functionality and user proficiency. This subcontract, issued by the National Research Council of Canada under the Government of Canada, is focused on delivering expert-guided on-site support to enable seamless integration and sustained operation of the system at the place of performance in Mississauga. The services are designed to equip personnel with the necessary skills to independently manage system performance, perform routine calibrations, and execute preventative maintenance procedures, minimizing downtime and maximizing system reliability. The opportunity is open for response until August 31, 2026, and is classified under NAICS code 611430, indicating its alignment with professional and technical training services. Although the solicitation number and point of contact information are not provided, interested parties must submit proposals prior to the stated deadline. The contract does not specify any set-aside categories, making it open to eligible contractors without restriction based on business size or ownership type. Participation requires demonstrated expertise in QCM technologies and a proven capacity to deliver hands-on technical training and field support in a government-operated environment.

National Research Council of Canada

POSTED

about 22 hours ago

DEADLINE

Facility Personnel HVAC TrainingThe contract titled Facility Personnel HVAC Training is a subcontract issued by MTC Inland Empire Job Corps with a response deadline of August 7, 2026, aimed at delivering on-site training to facility staff for the operation and maintenance of newly installed HVAC systems. The requirement is designated under the SBA’s small business set-aside categories, which include Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, ensuring eligibility is restricted to qualified small businesses meeting these criteria. The North American Industry Classification System code 611430 indicates this effort falls under other schools and instruction services, reflecting its focus on workforce training rather than equipment procurement or construction. Training must be conducted directly at the facility where new HVAC systems are being implemented, requiring the contractor to provide hands-on, practical instruction tailored to the specific equipment and operational environment. The solicitation does not specify geographic location beyond the agency name, suggesting the training will occur at one or more of the Job Corps centers under MTC Inland Empire Job Corps’ jurisdiction. Interested parties must submit proposals by the deadline to qualify for award consideration under this set-aside program, which prioritizes small, disadvantaged, and veteran-owned businesses seeking federal contracting opportunities. The UI link directs interested vendors to the official opportunity page hosted by the SBA for additional submission guidance.

MTC Inland Empire Job Corps

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Commerce Nist

Same awarding agency

Technical Documentation and Training ServicesThe contract is for the development and delivery of technical documentation and training services related to an electrical performance monitoring system, encompassing user manuals, maintenance guides, and operator training materials. The work is being procured as a subcontract under the Department of Commerce, National Institute of Standards and Technology, with a NAICS code of 541690 indicating it falls under other scientific and technical consulting services. The solicitation was posted on August 4, 2026, and responses are due by August 19, 2026, at 2:00 PM. The place of performance and detailed office address information are not specified, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors without specific small business or socioeconomic preferences. The point of contact details are not provided in the available data.

Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

System Integration and Installation SupportThe contract entails the on-site installation, startup, performance testing, and seamless integration of a monitoring system with existing test infrastructure at NIST facilities. This work requires technical expertise in system integration to ensure compatibility and optimal functionality within the laboratory environment, with all activities performed at the physical location of NIST operations. The scope demands precision in deployment and validation to meet the high standards of measurement and testing required by the institution. This is a subcontract under NAICS code 541330, with a response deadline of August 19, 2026, and was posted on August 4, 2026. The contracting entity is the Department of Commerce through its NIST division, and performance will occur at NIST facilities, though specific location details are not provided. The work is critical to enhancing the capability of NIST's testing infrastructure and requires vendors to demonstrate proven experience in integrating complex monitoring systems within federal research environments.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Commercial Electrical Performance Monitoring System SupplyThe contract entails the supply of a commercially available electrical performance monitoring system designed for in-situ reliability testing of advanced packaging interposers, encompassing both an electrical analyzer and current-stress components necessary for comprehensive performance evaluation under operational conditions. The system must be fully functional, ready for immediate deployment, and capable of delivering precise, real-time data to assess the long-term reliability and integrity of interposer technologies used in high-performance electronic packaging. This subcontract, issued by the Department of Commerce NIST, has a response deadline of August 19, 2026, and was posted on August 4, 2026, under NAICS code 334516, which pertains to the manufacturing of electronic instrumentation. There is no set-aside designation, and the place of performance and point of contact details are unspecified, indicating flexibility in delivery and execution. The contract is intended to support advanced research and testing capabilities within the NIST framework, requiring the supplier to deliver a complete, integrated solution that meets defined technical requirements without customization or modification.

Analytical Laboratory Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

Sources Sought Optical Spectrum Analyzer

Solicitation # NB688000-26-02467

The National Institute of Standards and Technology (NIST) is conducting market research to identify vendors capable of supplying an Optical Spectrum Analyzer that meets specific technical requirements outlined in the attached specifications. This sources sought notice is not a solicitation, request for quotation, or binding commitment to award a contract; it is solely intended to gather information on potential suppliers before determining the appropriate acquisition method. Responses must include the company providing the product, the manufacturer’s name, and the country where the product is manufactured, along with capability statements limited to four pages containing product data sheets, typical lead times, and any additional relevant information. Proprietary information should be clearly marked, and no quotes will be accepted or considered at this stage. The requirement is classified under NAICS code 334516, with a small business size standard of 1,000 employees, and NIST is evaluating whether a small business set-aside opportunity exists based on responses received. All responsible sources—regardless of size—are encouraged to respond, but responses must demonstrate that the product can meet the stated specifications. The agency will use the collected information to inform future procurement decisions and determine if competition can be limited to small businesses if at least two qualified ones respond. Responses must be submitted electronically to Lisa Stevens at lisa.stevens@nist.gov no later than August 14, 2026, and must not include marketing brochures. The product’s country of origin is a critical piece of information for compliance and sourcing considerations.

Analytical Laboratory Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

Site Effluent System

Solicitation # 1333ND26RNB190022

The solicitation for the Gaithersburg Site Effluent Treatment System, identified by number 1333ND26RNB190022, is a reissued opportunity aimed at fully reconstructing the aging and deteriorated treatment system located on the NIST campus in Gaithersburg, Maryland. Originally constructed in the mid-1990s to meet Washington Sanitary Sewer Commission effluent standards, the system has since become nonfunctional due to severe structural and mechanical failures. Critical components including the wet tank’s interior floor supports, aluminum grating, blowers, heaters, stir mechanism, and explosion-proof electrical systems are corroded, seized, or completely inoperable, rendering the facility unsafe for access and unable to meet current regulatory and life safety codes. The scope requires a complete overhaul: installation of a new structural floor and support framework, epoxy lining of the wet tank, replacement of all ventilation and heating systems, a new agitation motor and shaft, modern pH monitoring and data signaling, upgraded lighting and electrical outlets, and full replacement of all hazardous-area electrical wiring and conduit. All work must comply with current applicable regulations and standards. The contract is set aside exclusively for Women-Owned Small Businesses under NAICS code 561210, with proposals due by August 4, 2026, and award based on best value to the government, evaluated across Technical Approach, Schedule, and Price—though specific weighting criteria are not disclosed. Performance is expected to be completed within 200 days from Notice to Proceed, and a second site visit is scheduled per the attached amendment to ensure offerors fully understand the site conditions. Questions must be submitted by June 18, 2026, to the designated point of contact, Sasha Bradford, via email. While no detailed pricing structure, CLINs, or contract administration details are provided, submission must include comprehensive technical methodology, a feasible execution timeline, and a clear price proposal. All work is to be performed on-site at the NIST campus in Gaithersburg, Maryland, with no mention of packaging, marking, or delivery terms, and no additional bonding or insurance requirements specified within the available documentation.

Facilities Support Services

POSTED

about 15 hours ago

DEADLINE

Metrology-grade Chilled Mirror Dew Point Hygrometers

Solicitation # 1333ND26QNB680396

The National Institute of Standards and Technology (NIST), under the U.S. Department of Commerce, is soliciting two metrology-grade chilled mirror dew point hygrometers to enhance precision in laboratory measurements for national mass calibration standards. The equipment must meet stringent technical specifications including dew point accuracy of ±0.1°C, temperature accuracy of ±0.07°C, and reproducibility of ±0.05°C across both parameters, with a measurement range of –60°C to +20°C dew point and 0.1% to 100% relative humidity. Units must be new, shipped in original manufacturer packaging, and include all software and documentation; used, remanufactured, or gray-market items are prohibited. Delivery is required FOB destination to NIST’s Gaithersburg, Maryland facility within six to twenty weeks after receipt of order, with inspection and acceptance conducted onsite by NIST technical personnel based on verification of performance, physical dimensions, power requirements, and operational features such as RS-232 interface, PTFE sample circuit, and 3-stage thermoelectric cooling. Quotations must be submitted as firm-fixed-price offers in four electronic volumes: Technical Quotation demonstrating compliance with all technical requirements, Demonstrated Experience detailing three or more recent projects involving materially similar sputter coater systems, Price Quotation submitted separately via email, and Terms and Conditions acknowledging all solicitation provisions. Offerors are required to comply with FAR clauses 52.212-1, 52.212-3, 52.212-4, and 52.212-5, and must certify adherence to security requirements under FAR 52.204-25 and FAR 52.240-91, including avoidance of covered telecommunications equipment from prohibited entities. Noncompliance must be disclosed within 72 hours. The award will be made on a best-value trade-off basis, prioritizing technical capability and demonstrated experience over price, with no discussions anticipated. All submissions must be sent electronically to forest.crumpler@nist.gov and donald.collie@nist.gov by August 11, 2026, referencing solicitation number 1333ND26QNB680396, and must include the UEI and CAGE code. Invoices must be processed through the U.S. Treasury’s Invoice Processing Platform or directly to INVOICE@

Analytical Laboratory Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

Electrical Performance Monitoring System

Solicitation # 1333ND26QNB030356

The Department of Commerce, National Institute of Standards and Technology, is soliciting proposals for an Electrical Performance Monitoring System under solicitation number 1333ND26QNB030356, posted on August 4, 2026, with responses due by August 19, 2026. The contract is not subject to any small business set-aside and falls under NAICS code 334515, indicating it relates to the manufacturing of instruments and related products for electrical measurement and testing. Proposals must be submitted to the Office located in Gaithersburg, Maryland, 20899, with no specific place of performance designated beyond this. Jennifer Lohmeier is the primary point of contact, reachable via email at jennifer.lohmeier@nist.gov or phone at 301-975-6289, and all inquiries should be directed to her. The full solicitation details are available through the provided SAM.gov link, and contractors are expected to meet the technical requirements outlined in the attached documents for deploying a system capable of comprehensive electrical performance monitoring.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 15 hours ago

DEADLINE

Laser Tracker Metrology System - Sources Sought

Solicitation # NIST-AMD-SSN-7302461

The U.S. Department of Commerce, National Institute of Standards and Technology (NIST), is conducting market research through a Sources Sought Notice to identify potential suppliers capable of providing a single portable Laser Tracker Metrology System meeting precise technical specifications for use in laboratory and manufacturing environments. The system must utilize 3D interferometer laser technology with a 20-meter measurement range and achieve an accuracy of 15 micrometers or 0.7 micrometers per meter. It must include two spherically mounted retroreflectors, onboard environmental compensation, compatibility with six-degree-of-freedom active target tracking, and software capable of remote instrumentation control, automated data collection, geometric analysis using CAD models and point cloud processing, environmental error compensation, 3D visualization, and traceable documentation. The system must be fully portable with a protective carrying case, include all necessary cables and a digital operating manual, and come with a factory calibration certificate. The contractor must provide a minimum one-year warranty, and delivery is expected within two months after order receipt to Gaithersburg, MD, with no installation or training required. Industry respondents are asked to submit a concise, five-page response including company details, size certification under NAICS code 334513 (with a small business threshold of 750 employees), SAM.gov registration status, and country of manufacture. Information on existing federal contract vehicles such as GSA schedules is encouraged but not mandatory. Responses must be sent to the designated NIST point of contact by August 11, 2026, and must not include proprietary, classified, or sensitive data. This notice is strictly for market research; no contract will be awarded based on responses, no payment will be made for submissions, and NIST will not provide feedback or respond to questions regarding the findings. The goal is to inform future acquisition planning, potentially leading to a formal solicitation published on SAM.gov or GSA eBuy, but no obligation or commitment is created by this notice.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 15 hours ago

DEADLINE

Solicitation # 1333ND25QNB680453

The contract titled Reticle Blanks is issued by the Department of Commerce NIST under solicitation number 1333ND25QNB680453 and was posted on August 4, 2026, with a response deadline of August 19, 2026, at 3:00 PM Eastern Time. It is classified as a combined solicitation targeting the NAICS code 334516, which pertains to the manufacturing of optical and precision instruments. The primary point of contact is Forest Crumpler, reachable via email at forest.crumpler@nist.gov, and the contracting office is located in Gaithersburg, Maryland, with a ZIP code of 20899. The contract’s place of performance is in Boulder, Colorado, with a ZIP code of 80305, indicating that delivery of the reticle blanks must occur at this location. There is no set-aside designation specified for this contract, meaning it is open to all eligible contractors regardless of business size or status. Submissions must fully comply with the requirements outlined in the attached documentation, which includes technical specifications, delivery timelines, and quality standards for the reticle blanks. Interested parties should access the full solicitation details through the provided SAM. gov link to ensure all submission criteria are met prior to the deadline. All proposals must be submitted electronically through the federal procurement system and should demonstrate the vendor’s capacity to deliver high-precision optical components consistent with NIST’s operational needs.

Analytical Laboratory Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

Helium Leak Detector

Solicitation # 1333ND26QNB030450

The Department of Commerce, National Institute of Standards and Technology, is soliciting proposals for a Helium Leak Detector under Solicitation 1333ND26QNB030450, which was posted on August 4, 2026, with a response deadline of August 19, 2026, at 2:00 PM Eastern Time. This procurement is designated as a Small Business Set Aside – Total, meaning only small businesses are eligible to compete, and it falls under the NAICS code 334516 for Instrument Manufacturing for Measuring and Testing. The contract will be performed at the agency’s facility in Gaithersburg, Maryland, and all submissions must be directed to Jennifer Lohmeier, the primary point of contact, via email at jennifer.lohmeier@nist.gov or by phone at 301-975-6289. The solicitation is issued through the SAM.gov portal, and interested parties must access the official link to review full requirements and submit responses in accordance with federal procurement guidelines.

Analytical Laboratory Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

Spatial Light Modulator

Solicitation # NB672020-26-02299

The National Institute of Standards and Technology (NIST) is conducting market research to identify qualified vendors capable of supplying one Spatial Light Modulator System, including a modulator and a benchtop thermoelectric liquid chiller, as outlined in the attached specifications. This sources sought notice is not a solicitation, nor does it obligate the government to award a contract; no payment will be made for information submitted. NIST is evaluating the market to determine whether the acquisition can be set aside for small businesses, including small disadvantaged, women-owned, HUBZone, service-disabled veteran-owned, and veteran-owned businesses, under NAICS code 334516 with a 1,000-employee size standard. If at least two qualified small businesses respond, the requirement will be solicited as a small business set-aside; otherwise, it may proceed as an open competition. All responsible sources, regardless of size, are encouraged to respond. Interested parties must submit a capability statement of no more than five pages, including company profile details such as employee count, office locations, UEI, and CAGE code; the name of the entity providing and manufacturing the product with its country of origin; specification sheets and examples demonstrating compliance with NIST requirements; typical lead time for delivery, installation, and training; and verification of small business status. Additional relevant information that may assist in refining the requirement is welcome, but marketing brochures or sales materials will not be considered. Responses must be submitted electronically by July 24, 2026, to the primary point of contact, Clifford Nicholson, via the provided email and phone. The procurement process, if initiated, will be conducted through SAM.gov based on the findings of this market research.

Analytical Laboratory Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

High-Power Vacuum Tube Supply (EIMAC 4-400C)The contract seeks the procurement of a single EIMAC 4-400C high-power vacuum tube to be delivered, installed, and accompanied by comprehensive training at the NIST facility in Boulder, Colorado, with a zip code of 80305. The requirement encompasses not only the supply of the specialized vacuum tube but also the full lifecycle support necessary for its operational integration, ensuring that personnel are adequately trained to handle, maintain, and utilize the equipment effectively in high-power applications. The contract is classified as a subcontract under NAICS code 334418 and is managed by the Department of Commerce through its NIST division, with responses due by August 6, 2026. The solicitation was posted on August 3, 2026, indicating a highly compressed timeline for potential vendors to prepare and submit proposals. Place of performance is strictly limited to the Boulder site, and no set-aside provisions are specified, leaving the opportunity open to all qualified contractors.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE