Top

QCM System Installation and Training Services

Active

International

Response Deadline08/31/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

611430 - Professional and Management Development TrainingView NAICS

Place of Performance

Mississauga, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 31

Submission deadline

Response Deadline

08/31/2026, 07:00:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Provision of training and technical support for operation, calibration, and maintenance of the QCM system, including setup and commissioning.

Similar Contracts

Same NAICS industry code

NAICS: 611430

New

Federal

TACLANE C-175N Encryptor Training Instruction

POSTED

DEADLINE

Technical Training for Motion Capture System

NASA Shared Services Center

POSTED

DEADLINE

Technical Training Development and Delivery

W7NF Uspfo Activity Mi Arng

POSTED

DEADLINE

Technical Training Delivery

POSTED

DEADLINE

On-Site Training ServicesThe contract requires the provision of on-site training for laboratory personnel focused on the operation, software utilization, routine maintenance, quality control procedures, and troubleshooting of new PCR systems. Training must be delivered directly at the designated location in Durham, North Carolina, with a zip code of 27705, ensuring hands-on and practical instruction tailored to the specific equipment and workflows of the facility. The training services are intended to build competency among lab staff to independently manage and maintain the PCR systems effectively and in compliance with required standards. This is a subcontract solicitation under NAICS code 611430, issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6 (36C246). The opportunity was posted on August 4, 2026, with a response deadline of August 12, 2026, at 2:00 PM. The contract does not have a specified set-aside designation, and no point of contact information is provided. The work must be performed on-site at the location in Durham, and no other locations are indicated for performance.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Professional Development and Training Services for Law Enforcement Intelligence Analysts

POSTED

DEADLINE

MARCORSYSCOM Mentor Program

Solicitation # M67854-27-Q-0500

The contract titled MARCORSYSCOM Mentor Program, solicited under number M67854-27-Q-0500, is a non-personal service agreement aimed at delivering a comprehensive mentorship initiative aligned with the Marine Corps Systems Command’s Human Capital Management goals. The program is designed to advance professional development, strengthen leadership capabilities, and facilitate the transfer of institutional knowledge among Marine Corps personnel. The solicitation is set aside exclusively for SBA-certified Women-Owned Small Businesses under the WOSB Program, as outlined in FAR 19.15, with the NAICS code 611430 indicating it falls under Educational Support Services. The performance location is in Quantico, Virginia, with the office address listed at 22134-6050. The contracting officer is the Department of Defense, specifically under the Commander’s office. Questions regarding the solicitation must be submitted by 3:00 PM Eastern Time on Thursday, 6 August 2026, and the deadline for quotation submissions has been extended to 10:00 AM Eastern Time on Thursday, 20 August 2026. The primary point of contact is Mark Sanderson, reachable at mark.sanderson@usmc.mil, with Alexandra Diviney serving as the secondary contact at alexandra.diviney@usmc.mil. The solicitation is classified as a combined solicitation and is posted on SAM.gov with the UI link provided for further details and access to updated attachments reflecting the revised timeline.

POSTED

DEADLINE

U009--VISN EHS GEMS Training

Solicitation # 36C25926Q0706

This contract seeks to procure Healthcare Environmental Regulatory Compliance (HERC) Green Environmental Management System (GEMS) training services under a firm-fixed price Purchase Order issued by the Department of Veterans Affairs, Network Contracting Office 19, as a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside. The requirement is for a single 2- to 3-day virtual training course designed for up to 15 participants, with a base performance period running from September 1, 2026, to August 31, 2027, and a potential total contract duration extending through August 31, 2031, through optional one- to six-month extensions not to exceed six months total. The place of performance is virtual, centered around VISN 19’s Rocky Mountain Network Offices in Glendale, Colorado, with delivery terms specified as FOB Destination. Offerors must comply with strict SDVOSB eligibility criteria, including verification of their status in the SBA Small Business Certification database and adherence to limitations on subcontracting, which prohibit paying more than 50% of the contract value to non-certified entities, excluding certain direct costs such as cloud services or travel. The solicitation mandates submission of four distinct volumes: a capability statement capped at eight pages, a completed price schedule, three relevant past performance references, and a certified compliance document for subcontracting limitations, all due by 10:00 a.m. Mountain Time on August 14, 2026, via email to the designated contracting specialist. Evaluation will proceed through a pass/fail gate process assessing responsibility, price reasonableness, capability, and past performance, followed by a side-by-side pairwise comparison of compliant quotations to determine the most advantageous offer based on price and other factors, with no numeric weights assigned to the evaluation criteria. The government retains the right to select a quotation other than the lowest priced if it offers superior overall value. The contract incorporates several FAR and VAAR clauses with deviations, including those addressing sustainable products, security prohibitions, DEI discrimination, and technical industry standards tied to CERCLA, RCRA, OSHA, and EPA compliance, all requiring proof of adherence. Invoicing must be submitted electronically in accordance with VAAR 852.232-72 and must include all elements required by 5 CFR part 1315.9(b), with payments processed through the VA Financial Service Center in Austin, Texas.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

INARNG Leadership Development Support Service

Solicitation # W912L9-26-Q-9005

The U.S. Army National Guard is seeking qualified small businesses to provide a Junior Leadership Development Training Program for the Recruiting and Retention Battalion in Indiana under a firm-fixed-price contract. This full small business set-aside solicitation requires contractors to deliver a comprehensive curriculum-based training initiative including curriculum development, quarterly in-person sessions, and monthly virtual meetings over a base year and two optional years, spanning from September 2026 through September 2029. The work must comply with the attached Performance Work Statement and is to be performed primarily in Indianapolis, Indiana. Proposals must include a technical approach detailing the contractor’s methodology, evidence of past performance in similar leadership development programs, and a detailed price breakdown for each contract line item. All submissions must be sent via email by the deadline and include required administrative details such as the company name, address, CAGE code, UEI, and discount terms. Offers are due by 4:00 PM Eastern Time on August 14, 2026, with all questions required to be submitted by August 7, 2026. The government will award the contract based on best value, evaluating technical capability, past performance, and price using criteria outlined in the supplemental evaluation document. Only small businesses are eligible to compete, and the solicitation is issued as a combined synopsis and RFQ under FAR Subpart 12.6, meaning no formal written solicitation will be issued. Proposals must be submitted to Brian Williams, the contracting specialist, via email, with no formatting requirements beyond the inclusion of all mandatory components. All performance will be measured against defined standards in the PWS, and the contractor is responsible for providing all personnel, equipment, tools, and quality control necessary for successful implementation.

W7M7 Uspfo Activity In Arng

POSTED

DEADLINE

Solicitation # W911S226U3923

The contract titled Pearson e-book is issued under solicitation number W911S26U3923 by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a zip code of 13602-5220. It was posted on August 4, 2026, and responses are due by August 11, 2026, at 2:15 PM ET. The contract is classified as a combined solicitation under the NAICS code 611430, which corresponds to other schools and instruction, and there is no set-aside designation specified. The place of performance is listed with a zip code of 40121, though the city and state are not provided. Violet Roberts serves as the primary point of contact, reachable via email at violet.b.roberts.civ@army.mil or by phone at 5026246562. Additional details and the official solicitation can be accessed through the provided SAM.gov link.

POSTED

DEADLINE

Facility Personnel HVAC TrainingThe contract titled Facility Personnel HVAC Training is a subcontract issued by MTC Inland Empire Job Corps with a response deadline of August 7, 2026, aimed at delivering on-site training to facility staff for the operation and maintenance of newly installed HVAC systems. The requirement is designated under the SBA’s small business set-aside categories, which include Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, ensuring eligibility is restricted to qualified small businesses meeting these criteria. The North American Industry Classification System code 611430 indicates this effort falls under other schools and instruction services, reflecting its focus on workforce training rather than equipment procurement or construction. Training must be conducted directly at the facility where new HVAC systems are being implemented, requiring the contractor to provide hands-on, practical instruction tailored to the specific equipment and operational environment. The solicitation does not specify geographic location beyond the agency name, suggesting the training will occur at one or more of the Job Corps centers under MTC Inland Empire Job Corps’ jurisdiction. Interested parties must submit proposals by the deadline to qualify for award consideration under this set-aside program, which prioritizes small, disadvantaged, and veteran-owned businesses seeking federal contracting opportunities. The UI link directs interested vendors to the official opportunity page hosted by the SBA for additional submission guidance.

MTC Inland Empire Job Corps

POSTED

DEADLINE

On-Site Training for Facility PersonnelThe contract requires the delivery of at least two hours of on-site training for facility staff focused on the operation, troubleshooting, and emergency response procedures for newly installed fire alarm and CO2 detection systems. Training must be conducted in person at the facility and is intended to ensure that personnel are fully capable of managing the systems under normal and critical conditions. The solicitation is classified as a subcontract under the SBA’s small business set-aside program, specifically targeting small businesses including small disadvantaged, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses. The NAICS code 611430 indicates this is related to other schools and instruction, suggesting the training component is central to the scope. The contract was posted on August 4, 2026, with a response deadline of August 10, 2026, and is managed by the Earle C. Clements Job Corps Center, though specific location details for performance or contact information are not provided.

Earle C. Clements Job Corps Center

POSTED

about 22 hours ago

DEADLINE

in 5 days

View Details

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 334516

New

International

Benchtop Quartz Crystal Microbalance (QCM) System Supply

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Multichannel Quartz Crystal Microbalance System

Solicitation # 25-58128

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Calibration Equipment and Standards SupplyThe contract involves the supply of NIST-traceable calibration standards, reference materials, and portable calibration devices over a three-year period, ensuring precision and traceability for metrological applications. The vendor is expected to provide comprehensive certification for all delivered items and implement a robust inventory management system to track usage, calibration cycles, and compliance. All materials must meet recognized international standards and be accompanied by documentation verifiable through NIST traceability. This is a subcontract under the Government of Canada, specifically managed by the National Research Council of Canada, with performance required within Canada. The solicitation was posted on August 1, 2026, with proposals due by August 25, 2026, and the NAICS code 423490 indicates a focus on commercial equipment and supplies distribution.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Calibration Documentation and Compliance ReportingThe contract involves the generation, management, and archival of audit-ready calibration reports that maintain full traceability to SI and NIST standards, ensuring compliance with rigorous metrological requirements. The scope requires seamless integration of these reports into established quality management systems to support consistent documentation, regulatory adherence, and internal or external audit preparedness. All processes must guarantee data integrity, version control, and retrievability across the calibration lifecycle to meet international best practices in laboratory accreditation and quality assurance. The work is structured as a subcontract under the National Research Council of Canada, part of the Government of Canada, with a North American Industry Classification System code of 541380, indicating it falls under professional, scientific, and technical services. The solicitation was posted on August 1, 2026, with responses due by August 25, 2026. Performance is to be carried out within Canada, and while no specific location or point of contact is provided, the obligation to align with national standards and federal compliance expectations implies a high level of precision and accountability in execution.

Testing Laboratories and Services

POSTED

DEADLINE

Emergency Calibration and On-Demand Response ServicesThe contract demands the provision of 24/7 emergency calibration services to respond rapidly to unplanned equipment failures within a GMP-compliant environment, ensuring uninterrupted operations and regulatory adherence. Contractors must be prepared to deploy qualified personnel at any time to recalibrate critical measurement instruments, minimizing downtime and maintaining product quality and process integrity. Service levels require immediate response capabilities, with strict protocols for documentation, traceability, and compliance with GMP standards throughout all calibration activities. The opportunity is structured as a subcontract under the National Research Council of Canada, part of the Government of Canada, with performance obligations located across Canada. The solicitation was posted on August 1, 2026, and responses are due by August 25, 2026, under NAICS code 811211 for industrial and commercial equipment repair and maintenance. Bidders must demonstrate proven experience in regulated environments, capable of meeting stringent response time expectations and maintaining rigorous calibration records acceptable to health and safety authorities. Successful vendors will be expected to integrate seamlessly with existing facility operations and uphold the high standards required for pharmaceutical, biotech, or similar GMP-regulated manufacturing settings.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Scheduled Calibration Services for Laboratory and Manufacturing InstrumentsThe contract requires the performance of routine, on-site calibration services for 365 scientific and industrial instruments during scheduled shutdown periods to ensure continued compliance with Good Manufacturing Practices and equipment validation standards. All calibration work must be conducted in Canada, with services aligned to operational downtime to minimize disruption to critical laboratory and manufacturing processes. The scope emphasizes precision, regulatory adherence, and timely execution to support ongoing quality assurance protocols in a regulated environment. The solicitation is classified as a subcontract under NAICS code 811211 and is managed by the National Research Council of Canada, operating under the Government of Canada. The opportunity was posted on August 1, 2026, with a response deadline of August 25, 2026. Proposals must demonstrate technical capability, experience with GMP-regulated environments, and the ability to coordinate calibration activities within tight operational windows. No set-aside provisions are specified, and all interested parties are expected to meet the stringent calibration and documentation requirements necessary for federal compliance.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Task Order Execution for Migration Support ServicesUnder the IDIQ-style TBIPS arrangement, this task order seeks subcontractors to provide migration support services as part of broader government technology modernization efforts. The scope includes executing discrete tasks such as system migration projects, help desk staffing, and technical transition support, with work to be performed across Canada. The solicitation is open to eligible contractors who can deliver specialized technical services under the NAICS code 541519, which pertains to other computer-related services. Submission of proposals is due by August 19, 2026, with the opportunity posted on August 1, 2026, under the auspices of the National Research Council of Canada, a division of the Government of Canada. The contract structure allows for flexible task execution under a pre-established framework, enabling rapid mobilization of vendor resources as needed to meet evolving federal IT demands.

Other Computer Related Services

POSTED

DEADLINE

Indigenous-Led IT Services Joint Venture ParticipationIndigenous-owned information technology firms are invited to form or join joint ventures to qualify as prime contractors under the TBIPS arrangement, with the explicit requirement that the venture be led by an Indigenous-owned business. Non-Indigenous firms may participate only as subcontractors within these Indigenous-led joint ventures, ensuring that control, decision-making, and primary responsibility remain with Indigenous entities. The opportunity is tied to NAICS code 541512, which covers custom computer programming services, and is administered by the National Research Council of Canada on behalf of the Government of Canada. Performance of the contracted work is expected to take place across Canada, with no geographic restrictions within the country. The solicitation opened on August 1, 2026, and responses must be submitted by August 19, 2026, with the application process managed through Canada Buys, the federal government’s procurement portal. This initiative supports broader economic inclusion and capacity building for Indigenous businesses in the federal IT services sector.

Computer Systems Design Services

POSTED

DEADLINE

Level 3 Help Desk Support for IT System MigrationsThe contract is for Level 3 Help Desk Support specifically tailored to assist with IT system migration phases across Canada. It requires advanced technical expertise to troubleshoot complex issues, resolve incidents, provide direct user support, and coordinate migration activities as needed. The scope demands a high level of technical proficiency to ensure seamless transitions during critical system upgrades, with support provided on a flexible, as-required basis to meet dynamic project timelines and operational demands. The solicitation is posted under the NAICS code 541512 for Custom Computer Programming Services and is classified as a subcontract opportunity under the Government of Canada, with the National Research Council of Canada as the contracting agency. Responses are due by August 19, 2026, and performance is expected to occur throughout Canada. No specific location or set-aside provisions are detailed, indicating the work is open to qualified vendors regardless of business size or status, with all support activities centered on ensuring minimal disruption during IT infrastructure transitions.

Computer Systems Design Services

POSTED

DEADLINE

B.10 Help Desk Specialist, Level 3, Voluntary Indigenous Set-Aside

Solicitation # 26-58066

The National Research Council of Canada is seeking qualified Indigenous service providers to deliver Level 3 Help Desk Specialist services on an as-needed basis to support IT system migrations under the Mercury Program. This solicitation is a Voluntary Indigenous Set-Aside open exclusively to suppliers who have pre-qualified under the TBIPS Supply Arrangement EN578-170432 for B.10 Help Desk Specialist, Level 3. The requirement is designed to respond flexibly to fluctuating demand, ensuring timely and expert technical support during critical system transitions. Proposals must be submitted by the deadline of August 19, 2026, and all responders must be Indigenous Supply Arrangement holders meeting the specified pre-qualification criteria. The contract will be performed across Canada with no specific city or state limitations, and all work is to be carried out in support of federal IT infrastructure. Shufang Weng, the Contracting Authority, is the primary point of contact for inquiries and can be reached via email or phone. The solicitation was posted on August 1, 2026, under the tender number CB-94-51127631, and is accessible via the Canada Buys portal. Participation is restricted to Indigenous businesses that have successfully completed the prior qualification process, reinforcing commitments to Indigenous economic inclusion and equitable access to federal contracting opportunities.

Telemarketing Bureaus and Other Contact Centers

POSTED

DEADLINE

Calibration Services for (3) Years for the NRC- Clinical Trial Material Facility (CTMF) and Emergency Calibration Services

Solicitation # 25-58107

The contract establishes a three-year calibration services agreement for the Clinical Trial Material Facility, with the potential to be renewed annually over three terms beginning in September 2026. The vendor will be responsible for calibrating all 365 pieces of equipment listed in Annex 1, which are critical to bio-manufacturing operations and must remain compliant with industry and regulatory standards. In addition to scheduled calibration services, the vendor must provide emergency calibration support on an as-needed basis to address unexpected equipment failures, operational disruptions, or urgent compliance requirements. The solicitation, issued under number 25-58107 by the National Research Council of Canada, is part of an open competitive procurement process with responses due by August 25, 2026. The services are to be performed at the facility located in Canada, and all work must ensure the precision, reliability, and regulatory adherence of equipment essential to clinical trial material production. The primary point of contact for the solicitation is Cindy Romain, Contracting Authority, reachable via email and phone provided in the documentation.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Solicitation # 26-58093

The National Research Council of Canada is soliciting a large slurry mixer for use in its Clean Energy Innovation Research Center to support the development of viscous battery slurries for a prototyping line, with the goal of enhancing efficiency and operational versatility. This procurement, under solicitation number 26-58093, is governed by the Policy on Reciprocal Procurement, which restricts eligibility exclusively to Canadian suppliers and suppliers from applicable trading partners; offers from non-trading partner entities will be rejected. The contract requires the delivery of a single large slurry mixer meeting strict technical specifications, including a maximum footprint of 2000 kg, dimensions no greater than 3000 mm in depth and height and 2000 mm in width, and a stand-alone, floor-mounted design operable by a single person. The system must include a cooling/heating capacity of at least 5000 kCal/h (6 kW) at 10°C with automatic temperature control and real-time temperature display on a control panel. The full scope includes final design and drawings for NRC approval, successful Factory Acceptance Test (FAT), delivery of the complete mixer with all accessories and documentation, on-site installation, Site Acceptance Test (SAT) approval, and comprehensive operator training. All deliverables must be completed within 11 months of contract award, with key milestones set at two months for design approval, five months for FAT completion, and eight months for delivery. Payment is on a firm unit price, fixed-price basis, with no advance payments and invoices submitted only after each deliverable is completed. The contract includes a mandatory 12-month warranty or the contractor’s standard warranty, whichever is longer, and requires compliance with environmentally preferable packaging standards and the NRC’s Security Requirements Checklist. The contractor must comply with Canadian federal ethics standards, including the Conflict of Interest Act and the Values and Ethics Code for the Public Service, and is subject to audit and oversight under the Accounts and Audit provisions. Payment terms specify 30 days for undisputed invoices, with 15 percent withholding for non-resident contractors unless a valid waiver is provided by the Canada Revenue Agency. The mixer will be delivered under Incoterms® 2020 DAP to 75, de Mortgage Boulevard, Boucherville, QC, J4B 6Y4, with shipping accessible only via de Lauzon Street. Proposals must be submitted electronically in three distinct sections—Technical Offer, Financial Offer,

All Other Industrial Machinery Manufacturing

POSTED

5 days ago

DEADLINE

in 3 days

View Details