Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

On-Site Installation, Training, and Commissioning

Active

Federal

Response Deadline08/03/2026, 02:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive on-site services for an X-ray system at Aberdeen Proving Ground in Maryland, including installation, calibration, mandatory safety inspections, operator training, and formal system handover. All work must be performed at the designated location, with the contractor responsible for ensuring the system is fully functional, safe, and operational upon completion. The task is classified as a subcontract under NAICS code 811212 and is linked to the Department of Defense through the W6QK Acc-Apg Adelphi agency. The solicitation was posted on July 28, 2026, with a strict response deadline of August 3, 2026, at 2:30 PM Eastern Time, leaving limited time for proposal submission. No set-aside preferences or organizational type restrictions are specified, making it open to qualified subcontractors capable of delivering technical service and training in a secure federal environment.

General Info

On-site X-ray system installation, calibration, training, and handover at Aberdeen Proving Ground with strict August 3, 2026 deadline.

Agency

Department Of Defense → W6QK Acc-Apg AdelphiView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

Aberdeen Proving Ground, MD, 21005, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 02:30:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg Adelphi

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Apg Adelphi

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform on-site installation, calibration, safety checks, operator training, and system handover of the X-ray system at Adelphi, MD.

Similar Contracts

Same NAICS industry code

Warranty and Technical Support ServicesThis contract entails the provision of comprehensive warranty coverage and ongoing technical support services specifically for an FTIR microscope, including remote troubleshooting, repairs, and routine maintenance to ensure uninterrupted operational performance. The scope of work is designed to sustain system functionality through proactive and reactive technical assistance, safeguarding investment in critical analytical equipment. Support must be delivered in alignment with industry standards for high-precision instrumentation, emphasizing reliability and responsiveness throughout the contract term. The contract is structured as a subcontract under a Small Business Set Aside classification, reserved exclusively for small businesses as defined by the SBA, with the North American Industry Classification System code 811212 indicating repair and maintenance services for scientific and industrial machinery. It is issued by the Office of the Chief Procurement Officer within the Department of the Treasury, with performance required in Washington, DC, zip code 20228. The opportunity was posted on July 29, 2026, and responses are due by July 31, 2026, at 6:00 PM, with no solicitation number assigned. The contract aims to ensure long-term instrument viability through qualified, locally accessible technical resources.

Office Of The Chief Procurement Officer

POSTED

about 7 hours ago

DEADLINE

MIL-STD-129 Marking & Barcoding ServicesThe contract requires the application of MIL-STD-129 compliant markings to ensure full logistics traceability, including 2D Data Matrix codes, unit-level markings, and shipment labels adhering to Department of Defense standards. This work is critical for accurate identification, tracking, and handling of military supplies throughout the supply chain and must be executed with precision to meet federal compliance requirements. The services are to be performed at the specified location in Tracy, California, with a ZIP code of 95304-5000. This is a subcontract opportunity under NAICS code 811212, solicited by the Fluid Handling Division within the Department of Defense. The posting date is July 28, 2026, and responses must be submitted by August 10, 2026. While no set-aside designation or point of contact is provided, interested parties should reference the official DIBBS link for additional solicitation details and submission instructions.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Identification Marking Compliance (MIL-STD-130N)The contract requires the application of permanent identification markings in accordance with MIL-STD-130N to ensure full compliance with Department of Defense asset traceability standards. This includes the use of Data Matrix codes or barcode labels that meet rigorous military specifications for durability, legibility, and machine readability, ensuring that all marked items can be accurately tracked throughout their lifecycle in the defense supply chain. All markings must be affixed in a way that withstands environmental exposure and handling without degradation, maintaining integrity from delivery through operational use. This is a subcontract opportunity issued under the NAICS code 811212 and managed by the Land Supply Chain division of the Department of Defense. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. While specific performance locations and points of contact are not provided, the requirement is tied to DoD-wide asset management objectives and applies to any items subject to identification marking mandates. Contractors must possess the technical capability and quality assurance processes to meet MIL-STD-130N requirements without deviation, as noncompliance could lead to rejection of deliverables and loss of contractual obligations.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Labeling and Marking Compliance ServicesThis contract requires full compliance with Department of Defense labeling standards for all delivered items, mandating durable marking, barcoding, and unique item identification (UID) in accordance with Federal Standard No. 313. All work must ensure that items are properly labeled to meet DoD tracking and inventory requirements throughout their lifecycle, with strict adherence to marking durability and data accuracy. The contract is a subcontract under the Defense Logistics Agency, with performance location specified as Kings Bay, Georgia, 31547-2634, and is classified under NAICS code 811212, indicating services related to textile and fabric finishing. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with all submissions expected to demonstrate capability to meet the stringent labeling and identification mandates required for DoD supply chain integrity.

Defense Logistics Agency

POSTED

DEADLINE

Military-Grade Packaging and Palletization ProviderThe contract requires precise military-grade packaging and palletization of shipments in full compliance with MIL-STD-129, ASTM D3951, and DLA RP001 (QUP:001) standards, ensuring all items are properly labeled with standardized barcodes including SSCC, GTIN, or 2D DataMatrix to support global military logistics and traceability. Execution must meet the stringent requirements for durability, identification, and handling associated with Department of Defense supply chain operations, with all work intended for distribution through established DoD channels. This subcontract, solicited under the LAND SUPPLY CHAIN agency of the Department of Defense, is performance-based at Tinker AFB with a zip code of 73145-8000 and is open for responses until August 10, 2026. The NAICS code 811212 indicates the focus on industrial machinery and equipment repair and maintenance-related packaging services, though the scope centers on standardized packaging for defense materiel. The solicitation is issued through the DIBBS portal, and qualified contractors must demonstrate proven capability in meeting military packaging directives and delivering full compliance with global barcoding and palletization standards to support operational readiness.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Defense-Grade Configuration and Quality Assurance ManagementThe contract requires the implementation of zero-defect quality assurance and configuration management processes for defense-grade procurement and delivery, ensuring all items meet the highest standards of reliability and compliance. Inspection procedures must strictly follow MIL-STD-1916 or ASQ H1331 standards, with full traceability maintained in accordance with FAR 52.246-2 to document the provenance and integrity of every component from source to final delivery. Configuration management must ensure all design, production, and modification controls are rigorously enforced to prevent deviations and maintain operational readiness throughout the lifecycle of the defense item. The work is to be performed at the specified place of performance in New Cumberland, PA, with a zip code of 17070-5002, under the purview of the Department of Defense's Fluid Handling Division. This is a subcontract opportunity with a solicitation posted on July 28, 2026, and responses due by August 10, 2026. The North American Industry Classification System code is 811212, indicating focus on administrative and support services related to defense logistics. Participation requires adherence to federal defense standards and demonstrates an expectation of precision, accountability, and end-to-end quality control under the most stringent military procurement protocols.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Destination Inspection Coordination and Quality AssuranceThe contract pertains to the coordination of destination inspection and quality assurance activities under Federal Acquisition Regulation 52.246-2, requiring full compliance with government-mandated product acceptance procedures at the delivery site. The subcontractor is responsible for ensuring all delivered items conform to specified requirements and for maintaining accurate documentation that verifies acceptance at the point of delivery, specifically at Tinker Air Force Base, Oklahoma, with a ZIP code of 73145-8000. The work involves direct support to Department of Defense operations under the agency name LAND SUPPLIER OPNS VEHICLE SPT, and the scope is bound by the NAICS code 811212, which relates to commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, indicating a limited window for qualified parties to submit proposals. This is classified as a subcontract, and while no set-aside type is specified, performance is strictly localized to the designated delivery location at Tinker AFB. The contractor must be prepared to execute inspection protocols in alignment with federal quality standards, deliver timely and comprehensive documentation, and support seamless integration of inspected items into military supply chains without delays or nonconformities. All activities are to be completed in accordance with the government’s established frameworks for acceptance and recordkeeping at the destination.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

UID (Unique Item Identification) and Barcoding ServicesThe contract requires the application of permanent Unique Item Identification (UID) markings using Data Matrix barcodes in strict compliance with MIL-STD-130N standards, ensuring that all markings are durable, legible, and meet federal requirements for traceability and inventory management. This includes the full process of data formatting according to UID specifications, the production of high-quality labels or direct part markings, and rigorous quality verification to confirm accuracy, permanence, and regulatory conformance. The work must be performed with precision to support Department of Defense asset tracking systems, with all deliverables subject to verification and validation protocols. This subcontract is issued under NAICS code 811212 and is tied to the Department of Defense through the agency name CONSTRUCTION & EQUIPMENT CONTAINERS, with performance required at a designated location in Albany, Georgia, with ZIP code 31704-0325. The solicitation was posted on July 28, 2026, with a firm response deadline of August 10, 2026. While no specific set-aside designation is noted, interested parties must submit their responses through the DIBBS platform, ensuring full adherence to submission procedures and technical requirements to qualify for award.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Military-Compliant Marking and BarcodingThe contract requires full compliance with MIL-STD-129 for item-level and container markings, mandating the application of 2D Data Matrix barcodes on all unit and shipping containers. Each marked item must include the National Stock Number, part number, and appropriate handling codes to ensure accurate identification and logistics tracking throughout the defense supply chain. The work involves precise labeling procedures for both individual items and their enclosing containers, adhering strictly to military standards for durability, legibility, and data accuracy under operational conditions. Performance is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is classified as a subcontract under NAICS code 811212. The solicitation was posted on July 28, 2026, with a response deadline of July 31, 2026. The contracting activity falls under the ASC Commodities Division of the Department of Defense, indicating this is a direct support requirement for defense logistics operations. All work must meet stringent military specifications without exception, and compliance will be rigorously enforced at the point of delivery.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Inspection and Acceptance Support at OriginThe contract requires the performance of in-process and final quality inspections using MIL-STD-1916 or ASQ H1331 sampling plans to ensure product conformance to government standards. Inspectors must accurately classify defects according to established criteria and provide support during government inspection activities at the supplier’s origin, ensuring transparency and compliance throughout the production process. The work involves close coordination with production teams and government representatives to identify, document, and resolve quality issues prior to acceptance and shipment. This subcontract, issued under the Department of Defense’s ASC Commodities Division, is classified under NAICS code 811212 and is open for response until August 10, 2026. The place of performance and specific location details are not provided, indicating that the work will occur at various supplier facilities across the supply chain. The contract is part of a broader effort to maintain rigorous quality controls on Defense-related commodities, with all inspection activities aligned to federal military and industry standards to ensure operational readiness and reliability of delivered products.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Technical and Quality Compliance ManagementThe contract requires strict adherence to Department of Defense technical, packaging, labeling, and quality standards for all production and delivery activities, with a focus on maintaining compliance through rigorous auditing, precise documentation, and alignment of internal processes. All work must be performed in accordance with the specifications outlined by the Maritime Supply Chain under the Department of Defense, ensuring that every stage of manufacturing and shipment meets the required military-grade criteria. The contract is classified as a subcontract with a NAICS code of 811212 and has a response deadline of August 10, 2026. Performance is expected to occur at a designated location in Saint Paul, Minnesota, with a ZIP code of 55111-4112. The solicitation was posted on July 28, 2026, and interested parties must submit their proposals before the deadline. The contract is managed through the DLA’s DIBBS platform, and full compliance with administrative and operational requirements will be subject to verification and oversight by the contracting authority.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MIL-STD-129R Compliant Marking and BarcodingThe contract requires the application of permanent markings and Code 39 barcodes on shipping containers to comply with MIL-STD-129R standards, specifically for use in U.S. Coast Guard logistics tracking systems. This work must ensure all labels are durable, legible, and accurately encoded to support automated scanning and inventory management throughout the supply chain, with strict adherence to military specification requirements for content, placement, and material resistance. The subcontract is part of a broader logistics initiative by the Department of Homeland Security's Sflc Procurement Branch 2 to enhance container traceability and operational efficiency. Proposals must be submitted by July 31, 2026, and the work is governed under NAICS code 811212, which pertains to industrial and commercial repair and maintenance services. There is no set-aside designation specified, and performance is tied to the Department of Homeland Security’s logistics infrastructure without a designated physical location provided. Interested parties should access the full solicitation details via the provided SAM.gov link to confirm technical specifications and compliance expectations prior to submission.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Apg Adelphi

Same awarding agency

Notice of Intent to Solicit From Only One Source for a Siemens Altair Enterprise Suite Software Scription.The U.S. Department of Defense, through the W6QK Acc-Apg Adelphi office, has issued a notice of intent to solicit exclusively from a single source for a Siemens Altair Enterprise Suite Software Subscription under solicitation number W911QX26QA145. This action is classified as a combined solicitation with no set-aside, indicating that the procurement is open to any eligible vendor, though intended for direct award to Siemens due to the proprietary and specialized nature of the software. The solicitation is posted with a response deadline of August 1, 2026, at 2:00 PM Eastern Time, and the associated NAICS code 513210 confirms the procurement as a software publisher activity. Performance will occur at Aberdeen Proving Ground, Maryland, with the contract administered from the office located in Adelphi, Maryland. Primary point of contact for inquiries is Nyshaun Greene, reachable via phone at 520-691-5586 or email at nyshaun.s.greene.civ@army.mil, with Eddie Lee Kemp listed as a secondary contact. Interested parties must refer to the attached solicitation document for detailed technical and contractual requirements, as the notice itself does not contain full procurement specifications. The official solicitation page can be accessed through the SAM.gov link provided. This procurement is essential for sustaining critical engineering and simulation capabilities within the Department of Defense's operational and testing environments.

Software Publishers

POSTED

about 7 hours ago

DEADLINE

Supply of Compatible Rotors and BottlesThe contract solicits the supply of 8x2000 mL swinging bucket rotor sets and 1L round bucket sets specifically designed for use with centrifuge systems, ensuring full compatibility and operational reliability in high-throughput laboratory environments. This subcontract is focused on delivering precision-engineered rotor and bottle components that meet stringent performance and safety standards required for sensitive centrifugation tasks, likely supporting research or production activities within a defense-related laboratory setting. The opportunity is posted under NAICS code 339113 for medical equipment and supplies manufacturing, indicating the specialized nature of the components being procured. The place of performance is designated as Adelphi, Maryland, with a response deadline of August 12, 2026, and the contracting organization is the Department of Defense through the W6QK Acc-Apg Adelphi office. The order will be executed under a subcontract arrangement, suggesting that the awarded vendor will fulfill requirements on behalf of a prime contractor or directly support a DoD facility engaged in advanced scientific operations. All delivered items must conform to unspoken but critical technical specifications for use in federally funded, high-security, or regulated laboratory conditions.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Centrifuge Installation & Start-Up ServicesThe contract entails on-site installation, calibration, operational validation, and comprehensive user training for the BIOS 16 centrifuge system at the designated location in Adelphi, Maryland, with a zip code of 20783. All services must be performed physically at the site to ensure proper integration, functionality, and safe operation of the equipment by end users. The work is classified under NAICS code 541715, indicating it falls within scientific research and development services, and is issued as a subcontract under the Department of Defense, specifically through the W6QK Acc-Apg Adelphi office. Prospective providers must submit their proposals by the deadline of August 12, 2026, at 7:00 PM, with the solicitation posted on July 28, 2026, allowing approximately two weeks for response preparation. No set-aside provisions are specified, meaning the opportunity is open to any eligible subcontractor regardless of business size or demographic classification.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Laboratory Centrifuge Supply (OEM Equipment)The contract entails the supply of a Thermo Scientific BIOS 16 large-capacity bioprocessing centrifuge, a high-performance laboratory instrument designed for demanding bioprocessing applications. The equipment must be delivered as original equipment manufacturer product, fully assembled and operational, accompanied by comprehensive technical documentation including operation manuals, maintenance guides, and calibration certificates. A standard warranty covering parts and labor for a minimum of one year from date of acceptance is required, ensuring reliability and support during initial deployment. The centrifuge is intended for use at the Department of Defense facility in Adelphi, Maryland, with delivery and installation to be completed in accordance with federal procurement standards. This is a subcontract under the NAICS code 334516, classified under laboratory equipment manufacturing, and is managed by the W6QK Acc-Apg Adelphi office. The solicitation was posted on July 28, 2026, with responses due by August 12, 2026, at 7:00 PM Eastern Time. All submissions must comply with applicable federal regulations governing defense contracting, including documentation of manufacturing origin, quality assurance protocols, and supply chain transparency. The equipment must meet or exceed specified performance thresholds for speed, capacity, temperature control, and safety features to ensure interoperability with existing bioprocessing workflows within the facility.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Software Development for Image Processing and AnalysisThe contract requires the development and integration of specialized software for real-time X-ray image processing with capabilities including frame averaging, contrast adjustment, and on-screen measurement tools to enhance image clarity and analytical utility. The system must support output in multiple formats—.jpg, .tif, and .avi—to ensure compatibility with various reporting, archival, and playback systems used in military and defense applications. The software must be optimized for performance in live imaging environments, with emphasis on speed, accuracy, and reliability under operational conditions. This subcontract is issued under the NAICS code 541512 for computer systems design services and is tied to the Department of Defense through the Aberdeen Proving Ground location in Maryland. The solicitation was posted on July 28, 2026, with a response deadline of August 3, 2026, indicating a tight turnaround for proposal submission. Performance of the work is expected to occur at or in support of the designated federal facility, and the contract's focus on real-time medical and industrial imaging suggests it will support critical defense, diagnostic, or equipment inspection functions. All deliverables must meet strict technical requirements without specified set-aside provisions, making it open to eligible contractors regardless of business size or status.

Computer Systems Design Services

POSTED

DEADLINE

Radiation Safety Compliance and Shielding DesignThe contract requires the provision of engineering services to ensure radiation safety compliance for cabinet X-ray systems in accordance with 21 CFR 1020.40, focusing on shielding design, interlock validation, and comprehensive documentation. The work is critical to maintaining regulatory standards for radiation-emitting equipment, ensuring that safety controls are effectively engineered and verified to protect users and the surrounding environment from unnecessary exposure. Deliverables must align precisely with federal guidelines, emphasizing technical accuracy and thorough recordkeeping to demonstrate adherence during inspections or audits. The contract is a subcontract issued under the Department of Defense through the agency W6QK Acc-Apg Adelphi, with performance required at Aberdeen Proving Ground, Maryland, ZIP 21005. It is classified under NAICS code 541380, which corresponds to other scientific and technical consulting services. The solicitation was posted on July 28, 2026, with a firm deadline for responses on August 3, 2026, at 2:30 PM Eastern Time. The effort is not subject to any specific small business set-aside and is intended for qualified engineering contractors capable of delivering precise, compliant solutions for defense-related radiation-emitting systems.

Testing Laboratories and Services

POSTED

DEADLINE

X-ray Tube and Detector Supply (Critical Component Supplier)The contract requires the supply of high-resolution micro-focus X-ray tubes and digital detectors with precise technical specifications, including a focal spot size of no more than 10 micrometers, an anode voltage of 80 kilovolts, and the ability to support real-time imaging. These components are critical for advanced imaging applications and must meet stringent performance standards to ensure accuracy, reliability, and operational readiness in demanding environments. The equipment is intended for use by the U.S. Department of Defense at Aberdeen Proving Ground, Maryland, with delivery and performance expected to align with the defense sector’s technical and logistical requirements. The solicitation is categorized as a subcontract under NAICS code 334516, which pertains to the manufacturing of medical, dental, and laboratory equipment. The response deadline is August 3, 2026, at 2:30 PM, with the opportunity posted on July 28, 2026, providing a limited window for qualified suppliers to submit proposals. The contracting activity is under the W6QK Acc-Apg Adelphi office, indicating direct involvement with military research or testing facilities at Aberdeen Proving Ground. Suppliers must be prepared to demonstrate compliance with technical specifications, manufacturing quality controls, and the capability to deliver these specialized components within the required timeline without delays.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Micro-Focus X-ray System Integration and DeliveryThe contract calls for the supply, configuration, and delivery of a turnkey real-time micro-focus X-ray inspection system designed specifically for printed circuit board (PCB) analysis, with a focus on evaluating BGA solder joints and internal voids. The system must be fully operational at Aberdeen Proving Ground in Adelphi, MD, within 18 weeks of contract award, requiring rapid integration, commissioning, and validation to meet strict deployment timelines. The solution must be self-contained, fully configured, and ready for immediate use without requiring extensive on-site customization or additional components. This is a subcontract under the Department of Defense, with performance located at the Aberdeen Proving Ground facility identified by zip code 21005. The North American Industry Classification System code 334517 indicates the work pertains to the manufacturing of search, detection, navigation, guidance, and controlling instruments. The solicitation was posted on July 28, 2026, with responses due by August 3, 2026, at 2:30 PM Eastern Time. The contracting activity is designated as W6QK Acc-Apg Adelphi, and the deliverable must meet rigorous military-grade standards for reliability, precision, and operational readiness in a defense-centric environment.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

100% Small Business Set-Aside for Single Girder underhung Bridge CraneThis solicitation, identified as W911QX26QA123, is a Sources Sought Notice issued by the Department of Defense through the W6QK Acc-Apg Adelphi office for the procurement of a Single Girder underhung Bridge Crane system to be installed at Aberdeen Proving Ground, Maryland. The system must be a 5-ton capacity crane with a 20-foot span and 50-foot length, constructed to CMAA Class C specifications, and equipped with a 460-volt, three-phase motor, a chain hoist (as updated in Amendment 0002), variable frequency drive controls, an electronic overload limiter, and a ten-foot factory lift. The crane will include a radio control system with two transmitters and one receiver, a backup push button pendant, and a freestanding runway system supported by eight columns with a clearance of nine feet six inches underneath. The contract requires the removal and disposal of an existing three-ton bridge crane, full installation with rigging and freight, on-site operator training for shop personnel, and compliance with OSHA load testing standards per 1910.179(K)(2), 1926.251(A)(4), and 1926.251(C)(15)(II). Warranty requirements include a one-year coverage for all equipment, a two-year warranty on installation labor, and a five-year warranty specifically for the hoist motor. Responses are due by August 7, 2026, and must be submitted via email to the primary point of contact, Keturah Moore, with attachments excluding .zip and .exe file formats. The action is a 100% Small Business Set-Aside under NAICS code 333923, requiring respondents to certify their business size as small or large based on the 1,250-employee threshold, and small businesses must disclose any additional socioeconomic status such as HUBZone, 8(a), SDVOSB, WOSB, or EDWOSB. Offerors must also demonstrate technical capability to meet all specifications and provide descriptions of past performance on comparable projects. This notice serves only as a market research tool and is not a formal request for proposals, bids, or quotations.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

Sources Sought for Real-Time Micro-Focus X-ray Inspection SystemThe U.S. Department of Defense, through the W6QK Acc-Apg Adelphi office, is seeking information on potential sources capable of providing a real-time micro-focus X-ray inspection system. This solicitation, identified by number W911QX26QA189, is posted on July 28, 2026, with responses due by August 3, 2026, at 2:30 PM Eastern Time. The requirement falls under NAICS code 334517, which pertains to other electromagnetic and optical instrument manufacturing, and the system is intended for use at Aberdeen Proving Ground in Maryland. No set-aside designation is specified, meaning the opportunity is open to all eligible vendors. The point of contact for questions and submissions is Stency Steephan, with Shanna Dellinger as the secondary contact, both reachable via their official Army email addresses. Additional details regarding technical specifications and evaluation criteria are contained in the attached “Salient Characteristics” and “Sources Sought” documents, which are essential for respondents to review prior to submission.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

NOTICE OF INTENT TO SOLE SOURCE – The Government requires a five (5) year (base year plus four (4) option years) service maintenance contract for maintenance of a Government-owned Location of Miss and Hit (LOMAH) system.The Government is seeking a five-year service maintenance contract for the ongoing upkeep of a Government-owned Location of Miss and Hit (LOMAH) system, consisting of a base year and four optional years, to ensure system reliability and operational readiness. This solicitation is being issued as a sole source action under solicitation number W911QX26QA147, with no set-aside requirements, and is classified under NAICS code 811210 for repair and maintenance services. The contract will be managed by the Office of W6QK Acc-Apg Adelphi within the Department of Defense, with performance required at Aberdeen Proving Ground, Maryland. Responses must be submitted by July 31, 2026, with the opportunity posted on July 28, 2026. Primary point of contact is Douglas Dennard, reachable at 520-672-9560 or douglas.c.dennard.civ@army.mil, with Morgan Evans as secondary contact at 520-672-9578 or morgan.j.evans6.civ@army.mil. All necessary documentation, including the Combination Synopsis-Solicitation, Adelphi Instructions, and Provision and Clauses Final, are referenced and must be reviewed by prospective offerors.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Thermo Scientific BIOS 16 Centrifuge, Components, and Start-Up ServiceThe U.S. Army is soliciting proposals for the Thermo Scientific BIOS 16 Centrifuge, including its components and start-up service under solicitation number W911QX26QA169, which was posted on July 28, 2026, with a response deadline of August 12, 2026, at 7:00 PM Eastern Time. This is a presolicitation notice indicating the government’s intention to procure a single unit of the centrifuge along with necessary accessories and professional installation and startup services, with no set-aside reserved for small businesses or other categories. The contract falls under NAICS code 334516 for Laboratory Analytical Instrument Manufacturing and is being managed by the Department of Defense through the W6QK Acc-Apg Adelphi office located in Adelphi, Maryland, with all performance expected to occur at the same location. The primary point of contact for questions and further information is Benjamin Krein, reachable at benjamin.l.krein.civ@army.mil, with Joseph M. Dellinger listed as the secondary point of contact. Interested vendors should prepare detailed responses outlining their capability to supply the specified equipment, ensure full compatibility with existing laboratory systems, and provide comprehensive start-up support including on-site installation, calibration, training, and validation documentation. All submissions must comply with federal procurement guidelines and meet technical requirements established by the Army’s laboratory operations team in Adelphi, Maryland. Further details and submission instructions are available through the provided SAM.gov link.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE