Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

On-Site Safety & Environmental Compliance Monitoring

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract focuses on ensuring that field operations adhere strictly to OSHA and Reclamation Safety and Health Standards (RSHS). Key responsibilities include hazard monitoring, enforcement of personal protective equipment (PPE) usage, and thorough documentation of any incidents that occur onsite. The primary goal is to maintain a safe working environment by proactively identifying and mitigating risks in compliance with established safety protocols. The contract is titled "On-Site Safety & Environmental Compliance Monitoring" and is associated with the Great Plains Regional Office under the Department of the Interior. Classified under the NAICS code 541620, the contract was posted on May 1, 2026. While specific geographic and contact details are not provided, the emphasis is on field-based safety oversight to support environmental and occupational health compliance during operational activities.

General Info

Ensure OSHA and RSHS compliance through hazard monitoring, PPE enforcement, and incident documentation onsite.

Agency

Department Of The Interior → Great Plains Regional OfficeView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

MT

Set-Aside

NONE

Documents

This scope was carved out of 140R6026Q0042.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

C--WY BRIDGE INSPECTIONS

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Great Plains Regional Office
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of The Interior → Great Plains Regional Office
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Ensure field operations comply with OSHA and Reclamation Safety and Health Standards (RSHS), including hazard monitoring, PPE enforcement, and incident documentation.

Similar Contracts

Same NAICS industry code

NAICS: 541620
New
SLED
Monroe Area Recharge Project
Solicitation # RFP-2026-0001
The Lower Loup Natural Resources District is seeking a qualified professional engineering consultant for the Monroe Area Recharge Project in southwestern Platte County, Nebraska. The project aims to design and implement a system to divert water from the Loup Power Canal into identified wetlands and drainages to facilitate groundwater recharge and baseflow retiming. The scope of work includes an existing conditions assessment, site identification and prioritization, conceptual and final design, permitting support, and the development of a final hydrologic modeling report and an operations and maintenance plan. All designs must adhere to Federal Energy Regulatory Commission requirements, including specific mandates for minimum flow in bypass reaches, run-of-canal operations, water temperature limits of 93 degrees Fahrenheit, and a maximum diversion of 2,000 cfs between March 1 and June 30. Proposals are due by 5:00 pm on October 2, 2026, and must consist of four hard copies and one digital version delivered to the district office in Ord, Nebraska. Selection will be based on technical qualifications, a proven track record with similar water retiming projects, the proposed approach, and cost effectiveness. Work is scheduled to commence by December 1, 2026, with a timeline to be mutually agreed upon following the award. The contract requires the consultant to be fully insured for general liability and workers compensation. Payment will be processed on a monthly basis, subject to a 10 percent retainage that will be released upon project completion.
Lower Loup Natural Resources District

POSTED

about 20 hours ago

DEADLINE

in 20 days
View Details

More opportunities from Department Of The Interior → Great Plains Regional Office

Same awarding agency

NAICS: 335311
Federal
61--UNITROL 6800-Exciter HMI & Firmware Upgrade
Solicitation # 140R6026Q0114
Solicitation 140R6026Q0114 is a request for quotes issued by the Bureau of Reclamation, Missouri Basin Regional Office, for the upgrade of six UNITROL 6800 Exciter Human Machine Interface (HMI) units and associated firmware. The project focuses on replacing obsolete terminals and migrating operating systems from Windows XP/7 to Windows 10 to improve reliability and ensure compliance with cybersecurity and regulatory standards, including NERC-CIP, NIST 800-53, ISA-99, and IEC 62443. The scope includes the procurement of ABB brand-name hardware, such as the ECT Panel Model TPC-1551Tb and specific software licenses, along with certified engineering services for installation, power-up support, and the recommissioning of the exciter to resolve a critical Power System Stabilizer firmware bug. This procurement is a total small business set-aside, requiring offerors to be actively registered in SAM.gov and to provide exact ABB brand-name products to be considered technically acceptable. The period of performance is scheduled from September 1, 2026, to March 1, 2027, with delivery set for March 1, 2027, at the Grand Coulee Dam facility in Washington. Award will be based on a comparative evaluation of technical and price factors to determine the most advantageous offer to the government. Contractors must adhere to strict safety protocols, including Grand Coulee Lockout/Tagout procedures, and utilize the Invoice Processing Platform (IPP) for electronic payments. Following several amendments, the final quote submission deadline was extended to September 14, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

16 days ago

DEADLINE

in 2 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS