Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

One (1) Intermediate Procurement Specialist

Active
W8486-260759/AInternational

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of National Defence is seeking to award a single contract for one Intermediate Procurement Specialist under Stream 3 of the Task and Solutions Professional Services Supply Arrangement, with a total potential value under $4.5 million. The contract will consist of four initial one-year periods and one optional one-year extension, with delivery expected as soon as possible. Only pre-qualified suppliers listed under TSPS Supply Arrangement E60ZT-18TSPS are eligible to bid, and the solicitation is restricted to a specific group of approved vendors, including major consulting firms and joint ventures such as Accenture Inc., Deloitte Inc., KPMG LLP, PricewaterhouseCoopers LLP, and others. Bidders must submit proposals in either official Canadian language and are advised that RFP documents will be sent directly by the Contracting Authority and are not available on the CanadaBuys platform. All successful bidders must hold a Secret security clearance, and the work is to be performed at 101 Colonel By Drive in Ottawa, Ontario, within the National Capital Region. The Crown reserves the right to negotiate with any qualified supplier following the submission deadline, which is August 24, 2026, and inquiries must be directed to Marie-Josee Baril of the Contracting Authority.

General Info

Single contract for Intermediate Procurement Specialist, up to $4.5M, Secret clearance required, Ottawa location, pre-qualified vendors only.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541611 - Administrative Management and General Management Consulting ServicesView NAICS

Place of Performance

National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
Contacts
Marie-Josee BarilContracting Authority
contact@example.gov

Full Description

Show more
NOTICE OF PROPOSED PROCUREMENT File Number: W8486-260759/A Tier: 1 (< $4.5M) This requirement is for the Department of National Defence (DND) for the services One (1) Intermediate Procurement Specialist under Stream 3, Project Management Services. The intent of this solicitation is to establish one (1) Contract comprised of four (4) one-year initial periods and one (1) one-year option period. This solicitation is only open to the below list of pre-qualified suppliers under the Task and Solutions Professional Services (TSPS) Supply Arrangement (SA) number E60ZT-18TSPS. Delivery Date: As soon as possible. Documents may be submitted in either official language of Canada. RFP documents will be e-mailed directly from the Contracting Authority to the Qualified Supply Arrangement Holders who are being invited to bid on this requirement. Bidders are advised that the RFP documents are not available on the CanadaBuys Tender Management Application (https://canadabuys.canada.ca). The TSPS Method of Supply is a result of a formal competitive process which was established as a result of extensive consultations with industry. The Method of Supply provides suppliers with an on-going opportunity to become prequalified for participation in future bidding opportunities. To obtain more information about how to become a pre-qualified supplier for TSPS please contact Public Works and Government Services Canada (PWGSC). For general information on the various PWGSC Methods of Supply, or to obtain specific information on a PWGSC professional service method of supply, please visit PWGSC's CanadaBuys Tender Management Application website at: https://canadabuys.canada.ca/en/about-us/news-and-events/transition-can… List of Pre-Qualified Suppliers: This requirement is open the following suppliers who qualified under the stated consultant stream, region and tier: 1019837 Ontario Inc. 4336615 Canada Inc. and RFP Solutions Inc. joint-venture 7792395 Canada Inc. 8005931 Canada Inc 9149481 Canada Inc. 9345540 CANADA INC 9421-5340 Québec inc., 9193456 CANADA INC., IN JOINT VENTURE. 9468269 Canada Corp. A Hundred Answers Inc. A. Net Solutions Inc. Accenture Inc. Access Corporate Technologies Inc. Aceth Solutions Ltd. ACF Associates Inc. ACOSYS CONSULTING SERVICES INC./ SERVICES CONSEILS ACOSYS INC., PRICEWATERHOUSECOOPERS LLP, IN JOINT VENTURE Action Personnel of Ottawa-Hull Ltd Adaawe Consulting Ltd. Adecco Employment Services Limited/Services de placement Adecco Limited ADGA Group Consultants Inc. Adirondack Information Management Inc., The AIM Group Inc. in Joint Venture ADRM Technology Consulting Group Corp. ADRM Technology Consulting Group Corp. and Randstad Interim Inc Akkodis Canada Inc. ALINEA INTERNATIONAL LTD. ALITHYA CANADA INC Alivaktuk Consulting Inc. & NavPoint Consulting Group Inc. in JV ALLAN CLARKE & ASSOCIATES INC.; THE HALIFAX COMPUTER CONSULTING GROUP INC.; IN JOINT VENTURE Altis Recruitment & Technology Inc. ALTRUISTIC INFORMATICS CONSULTING INC. Amyantek Inc Aniko Consultants Inc., Samson & Associés-CPA Consultation Inc.-Samson & Associates CPA-Consulting Inc., in Joint Venture ARTEMP PERSONNEL SERVICES INC Arup Canada Inc. ASC Gp, Inc. AZUR HUMAN RESOURCES LIMITED BA - Tech consulting Inc. BDO Canada LLP BGIS GLOBAL INTEGRATED SOLUTIONS CANADA LP/BGIS SOLUTIONS GLOBALES INTEGREES CANADA S.E.C. Birchwood Healthcare Consulting Ltd. BMT CANADA LTD. BP & M Government IM & IT Consulting Inc. Breckenhill Inc. BRING Management Solutions Inc. BRYCA Solutions Inc. BTY Consulting Inc. BurntEdge Incorporated Cache Computer Consulting Corp. Calian Ltd. cim conseil en immobilisation et management inc. CIMA+ S.E.N.C. Cistel Technology Inc. Cofomo Inc. COLLIERS PROJECT LEADERS INC. COLLIERS MAÎTRES DE PROJETS INC. COLLIERS PROJECT LEADERS INC. COLLIERS MAÎTRES DE PROJETS INC., Tiree Facility Solutions Inc. in Joint Venture Commerce Decisions Limited Comtech Group Inc. Conoscenti Technologies Inc. Contract Community Inc. CONTRACT COMMUNITY INC., NISHA TECHNOLOGIES INC IN JOINT VENTURE CorGTA Inc. CPCS Transcom Limited CSI CONSULTING INC., J&M GROUP INC. IN JOINT VENTURE CVL INFORMATION SOLUTIONS INC. Dare Human Resources Corporation Decasult Inc. Deetken Enterprises Inc. Deloitte Inc. Donna Cona Inc. Doreen M Wong Eagle Professional Resources Inc. Eclipsys Solutions Inc Econ Inc. Elevated Thinking Inc. Enibas & Associates Inc. Ernst & Young LLP eVision Inc., SoftSim Technologies Inc. in Joint Venture EXPERIS CANADA INC. Factr Limited, ALTIS RECRUITMENT & TECHNOLOGY INC., in Joint Venture Fifalde Consulting Inc. Fleetway Inc. ForgeSight Technologies Inc. Gartner Canada Co. GEF Consulting Inc. Goss Gilroy Inc. GSI International Consulting Inc. Hofmann PM Inc HubSpoke Inc. I4C INFORMATION TECHNOLOGY CONSULTING INC IBISKA Telecom Inc. iFathom Corporation IFSD Advisors Ltd. inRound Innovations Inc., Radar Solutions Inc. and Munroe Technologies Inc. in Joint Venture IPSS INC. IT/Net - Ottawa Inc. IT/NET OTTAWA INC, KPMG LLP, in joint venture Kelly Sears Consulting Group KPMG LLP Lean Agility Inc. Leo-Pisces Services Group Inc. Les Enterprises Norleaf Networks Inc. Leverage Technology Resources Inc. Levio Conseils Inc. Lightning Tree Consulting Inc. MAKWA Resourcing Inc. Makwa Resourcing Inc., TPG Technology Consulting Ltd. in JOINT VENTURE Malarsoft Technology Corporation Maplesoft Consulting Inc. Maplestream Inc., Cofomo Inc. IN JOINT VENTURE Mason Clark Group Inc. Maverin Business Services Inc. Maverin Inc. MaxSys Staffing & Consulting Inc. MDOS CONSULTING INC. Melicaa Management Consulting Inc MGIS Inc. MGIS Inc., B D M K Consultants Inc IN JOINT VENTURE Mindstream Training Center and Professional Services Bureau, Inc Mindwire Systems Ltd. MINDWIRE SYSTEMS LTD., Akkada Professional Services inc., HubSpoke Inc., in Joint Venture MNP LLP Mobile Resource Group Inc MONZ CONSULTING INC., NEWFOUND RECRUITING CORPORATION. in Joint Venture MORSON INTERNATIONAL INC. NATTIQ INC. Naut'sa mawt Resources Group, Inc. NavPoint Consulting Group Inc. Newfound Recruiting Corporation NewLeaf Performance Inc. Nisha Technologies Inc. Nortak Software Ltd. NTT DATA CANADA, INC. OLAV CONSULTING CORP., MOSHWA ABORIGINAL INFORMATION TECHNOLOGY CORPORATION, IN JOINT VENTURE Oliver Wyman Government Services ULC OLIVER, WYMAN LIMITED/OLIVER, WYMAN LIMITEE Oomple Inc. OpenFrame Technologies, Inc. Optimus SBR Inc. OPUS LEADERS INC. Orbis Risk Consulting Inc. OXARO INC. P1 Consulting Inc. P3 Advisors inc. Paragon Digital Consulting, Inc. PCUBED CANADA INC. Performance Management Network Inc. PGF Consultants Inc. Pleiad Canada Inc. Portage Personnel Inc. Pricewaterhouse Coopers LLP Primex Project Management Limited PRIMEXX VENTURES INC., ALEJANDRA DOXTATOR, Joint Venture Procom Consultants Group Ltd. Prologic Systems Ltd. Promaxis Systems Inc Protak Consulting Group Inc. Protak Consulting Group Inc., Soubliere Interiors Ltd., 2672486 Ontario Inc. In Joint Venture QMR Staffing Solutions Incorporated Quallium Corporation Quarry Consulting Inc. Randstad Interim Inc. Reticle Ventures Canada Incorporated Revay and Associates Limited RFP Solutions Inc. RHEA INC. Robertson & Company Ltd. Robinson Global Management Inc. Run Straight Consulting Ltd S.I. SYSTEMS ULC S.M.A. Consulting LTD Samson & Associés CPA/Consultation Inc Sapper Labs Inc. Scalian Inc. SEASI Consulting Inc. SÉLECT GLOBAL INTERNATIONAL LTÉE. Skyfly Solutions Inc., iFathom Corp in Joint Venture SnapSEARCH Inc. SoftSim Technologies Inc. Space Strategies Consulting Ltd Spearhead Management Canada Ltd. Steer Davies Gleave North America Inc Stratégia conseil inc Strategic Relationships Solutions Inc. Sundiata Warren Group Inc. Superheroes Academy Inc. Symbiotic Group Inc. SYMBIOTIC GROUP INC., Akkodis Canada Inc., IN JOINT VENTURE SYSTEMATIX IT SOLUTIONS INC, MICROWORKS, IN JOINT VENTURE Systematix IT Solutions Inc./Systematix Technologies de L'Information Inc./Les Services Conseils Systematix Inc. in Joint Venture. Systèmes Syntax Ltée/Syntax Systems Ltd. Systemscope Inc. T.E.S. Contract Services INC. T.I.7 Inc. TAG HR The Associates Group Inc. Talencity Inc. TBP & Associates Inc. TDV Global inc. Technomics, Incorporated TECSIS Corporation TECSIS Corportation, Les Enterprises Norleaf Network Inc. in Joint Ventre TEKSYSTEMS CANADA CORP./SOCIÉTÉ TEKSYSTEMS CANADA The AIM Group Inc. The Halifax Computer Consulting Group Inc. THE LANSDOWNE CONSULTING GROUP INC. The Right Door Consulting & Solutions Incorporated Thinkpoint Inc. Thomas&Schmidt Inc. Tiree Facility Solutions Inc. TPG Technology Consulting Ltd. TRM Technologies Inc. Tundra Technical Solutions Inc TURNER & TOWNSEND CANADA INC. V42 Management Consulting, Inc. Valcom Consulting group Inc. Wiz Management Inc WSP Canada Inc. Yoush Inc. Zernam Enterprise Inc ZW Project Management Inc. ADDITIONAL INFORMATION FOR BIDDERS For services requirements, Bidders must provide the required information as detailed in article 2.3 of Part 2 of the bid solicitation, in order to comply with Treasury Board policies and directives on contracts awarded to former public servants. Security Requirement: There are security requirements associated with this requirement: Supplier Security Clearance required: Secret Security Level required (Document Safeguarding): None Citizen Restriction: N/A FOCI Review: N/A For additional information, consult Part 6 – Security and Other Requirements, and Part 7 – Resulting Contract Clauses. For more information on personnel and organization security screening or security clauses, bidders should refer to the Industrial Security Program (ISP) of Public Works and Government Services Canada (http://ssi-iss.tpsgc-pwgsc.gc.ca/index-eng.html) website. Location of Work: Region: National Capital Region Specific Location: 101 Colonel by Drive – Ottawa, Ontario BIDDERS’ INQUIRIES Inquiries regarding this Request for Proposal requirement must be submitted to the Contracting Authority: Name: Marie-Josee Baril Email: Marie-Josee.Baril@forces.gc.ca The Crown retains the rights to negotiate with suppliers on any procurement.

Similar Contracts

Same NAICS industry code

NAICS: 541611
New
SLED
Weekly Maintenance Log and Compliance ReportingThe contract requires the consistent maintenance and submission of weekly janitorial maintenance logs as outlined in Exhibit G, ensuring all cleaning tasks are accurately documented and verified on a regular basis. Compliance with state reporting requirements is mandatory, and the contractor must adhere to all applicable regulations to fulfill reporting obligations tied to janitorial services performed under this agreement. The work is part of a subcontract issued by the California Department of Motor Vehicles and is classified under NAICS code 541611, indicating it involves administrative management and general management services. The opportunity was posted on August 8, 2026, with a response deadline of August 27, 2026, and the performance location is within the state of California, though specific city or zip details are not provided.
California Department of Motor Vehicles

POSTED

about 17 hours ago

DEADLINE

in 19 days
View Details
NAICS: 541611
New
SLED
Project Documentation and Compliance ManagementThe contract entitled Project Documentation and Compliance Management requires the successful vendor to oversee the complete administration of bonding, insurance compliance, and subcontractor documentation, with strict adherence to A.M. Best-rated insurance standards and public works regulations. This includes ensuring all parties meet the required financial and legal thresholds for surety bonds, liability coverage, and worker protections dictated by state and federal public construction mandates. The vendor must maintain accurate, auditable records and coordinate with subcontractors to verify their compliance before work commences and throughout project execution. Managed under the Board of Regents of the University System of Georgia, this subcontract is tied to infrastructure or construction initiatives within the state and demands a thorough understanding of Georgia’s public works laws and insurance requirements. The solicitation was posted on August 7, 2026, with responses due by September 11, 2026, and is classified under NAICS code 541611 for management consulting services, indicating the role focuses on administrative oversight rather than direct construction. The place of performance and exact project location are not specified, suggesting the scope may span multiple sites under the university system’s jurisdiction, and all work must align with the state’s procurement and contracting protocols.
Board Of(university System of Georgia) Regents

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
SLED
Technical Assistance, Training, and Capacity¿Building Support for Non¿Profit Organizations in the Community Violence Intervention (CVI) Field
Solicitation # 0000040002
The California State & Community Corrections agency is seeking qualified entities to provide technical assistance, training, and capacity building support to community-based organizations engaged in community violence intervention efforts. The goal is to strengthen these organizations’ internal systems so they can sustainably and effectively carry out their work. Support must focus on key areas including organizational infrastructure, financial and administrative systems, case management and data collection, evaluation capabilities, staff development, wellness, supervision, and long-term sustainability. Up to $2,750,000 is available for this initiative, with the possibility of one or multiple awards based on proposal quality and number. All activities must be tailored to meet the specific needs of nonprofit organizations in the CVI field and must lead to measurable improvements in operational capacity. The solicitation, numbered 0000040002 and posted on August 7, 2026, has a response deadline of September 16, 2026. Proposals must be submitted through the CalProcure portal, and performance will occur across California. The primary point of contact for questions is Jessica Espinoza of the State & Community Corrections agency, reachable via email at jessica.espinoza@bscc.ca.gov. There is no set-aside or NAICS code specified, and the opportunity is open to entities capable of delivering high-quality, targeted capacity-building services to nonprofit organizations working in violence intervention.
State & Community Corrections

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
SLED
IT Strategic Planning and Compliance DocumentationHaralson County Government is seeking a subcontractor to provide comprehensive IT strategic planning and compliance documentation services focused on cybersecurity and disaster recovery. The scope includes developing IT strategies, creating and updating policies, producing detailed architectural documentation, and conducting annual GAP assessments to ensure adherence to regulatory requirements. The contract is classified under NAICS code 541611, indicating professional, scientific, and technical services related to management consulting. The solicitation was posted on August 7, 2026, with responses due by September 8, 2026. The work is to be performed in Georgia under the oversight of the state’s procurement system, though specific location details for performance or contact points are not provided. bidders must ensure their proposals align with the county’s compliance objectives and demonstrate proven experience in federal or state-level IT governance frameworks.
Haralson County Government

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
SLED
Software Asset Management (SAM) and Compliance ConsultingThe University of Michigan is seeking a subcontractor to conduct an enterprise-wide software asset management and compliance engagement focused on auditing software licenses, assessing compliance risks, and delivering actionable governance recommendations. The scope includes a thorough review of software ownership practices, identification of licensing gaps or overages, and the development of strategies to enhance stewardship and accountability across all departments. The goal is to establish a more transparent, efficient, and legally compliant software usage framework that reduces financial and operational exposure. The opportunity is posted as a subcontract under NAICS code 541611, with a response deadline of September 4, 2026, and a posting date of August 7, 2026. The work is expected to be performed remotely or at the University’s discretion, with no specific location mandated. There is no set-aside classification and the procurement is open to qualified vendors able to demonstrate expertise in software licensing audits, compliance frameworks, and enterprise governance. Interested parties must submit proposals through the provided SciQuest portal to be considered for selection.
University of Michigan

POSTED

about 21 hours ago

DEADLINE

in 27 days
View Details
NAICS: 541611
New
SLED
Project Management and Prime Contract OversightThe contract titled Project Management and Prime Contract Oversight is a subcontract opportunity issued by Texas A&M AgriLife Research, requiring the successful bidder to coordinate and manage subcontractors, maintain detailed scheduling, ensure regulatory compliance, and serve as the primary point of communication with Texas A&M AgriLife. The role involves overseeing prime contract obligations on behalf of the prime contractor, ensuring all deliverables align with agency expectations and project timelines. The position demands strong organizational skills, experience in federal or state-funded research projects, and the ability to navigate compliance and reporting requirements specific to agricultural research initiatives. The solicitation was posted on August 7, 2026, with a response deadline of August 21, 2026, indicating a narrow window for submission. It falls under NAICS code 541611 for Management Consulting Services and is classified as a subcontract without any set-aside designation. The place of performance is not specified, suggesting work may be performed remotely or across multiple Texas locations as needed. All communication and contractual obligations must be directed through the prime contractor, with the subcontractor expected to support seamless execution of AgriLife’s broader research objectives while maintaining strict adherence to contractual terms and performance metrics.
Texas A&amp;M AgriLife Research

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
SLED
Technical Documentation and Training MaterialsThe contract involves the development and delivery of comprehensive technical documentation and training materials for rotary cutters, including user manuals, safety guides, maintenance schedules, and supporting training content in both digital and printed formats. The work is being procured as a subcontract under the Texas Department of Criminal Justice, with the North American Industry Classification System code 541611 indicating technical writing and related services. All deliverables must meet precise standards to ensure clarity, accuracy, and usability for end users, with an emphasis on safety compliance and operational efficiency. The solicitation was posted on August 7, 2026, and responses are due by August 21, 2026, with no set-aside provisions designated and no specific place of performance detailed beyond the agency’s jurisdiction in Texas.
Texas Department of Criminal Justice

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
SLED
Reporting, Documentation, and Coordination ServicesThe contract titled Reporting, Documentation, and Coordination Services requires the preparation of daily reports, lab results, and non-compliance documentation, along with the coordination of communication among all relevant stakeholders. The work involves maintaining accurate and timely records to support operational compliance and facilitate informed decision-making across teams. This subcontract is solicited by the Jefferson County Drainage District No. 6 in Texas under NAICS code 541611, which pertains to administrative management and general management consulting services. The opportunity was posted on August 7, 2026, with a response deadline of August 28, 2026, and is accessible through the Texas SmartBuy portal. There is no specified set-aside designation, and details regarding the place of performance and point of contact are not provided in the contract data.
JEFFERSON COUNTY DRAINAGE DISTRICT NO. 6

POSTED

about 21 hours ago

DEADLINE

in 20 days
View Details
NAICS: 541611
New
SLED
Toll Program Strategic Management SupportThe Texas Department of Transportation is seeking a subcontractor to provide strategic advisory services focused on the governance, policy development, and long-term planning of toll operations and related programs. This engagement requires expert guidance in shaping operational frameworks, refining policy structures, and designing sustainable pathways for the future of tolling infrastructure within the state. The contractor will be expected to deliver high-level analysis, recommendations, and planning support tailored to the unique needs of Texas toll corridors and associated programs, ensuring alignment with state transportation goals and regulatory requirements. The work is classified under NAICS code 541611, indicating management consulting services, and is posted as a subcontract opportunity with a response deadline of September 9, 2026. The solicitation is open through the Texas SmartBuy portal, and while specific performance locations are not designated, the services will inherently support statewide toll initiatives managed by the Texas Department of Transportation. The contract does not specify a set-aside type, and no point of contact is listed, suggesting submissions must adhere strictly to the posted guidelines on the provided link. Successful bidders will need to demonstrate proven experience in transit governance, tolling policy, and strategic planning at a state or regional level.
Texas Department of Transportation

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
SLED
Small Business Participation and Vendor Disclosure ComplianceThe contract titled Small Business Participation and Vendor Disclosure Compliance requires vendors to adhere to Broward County’s ethical procurement standards by submitting conflict of interest certifications and fully disclosing any involvement in the development of solicitations. This subcontract is designed to ensure transparency and fairness in the procurement process by holding all participants accountable for potential biases or undue influence. Vendors must comply with these requirements as a condition of participation, reinforcing the county’s commitment to integrity and equitable business practices. The opportunity was posted on August 7, 2026, with a deadline for responses set for August 12, 2026, at 6:00 PM, leaving a narrow window for submissions. The contract falls under the NAICS code 541611, indicating it relates to management consulting services, and is issued by Broward County in Florida. Although no specific place of performance or point of contact is provided, participation is contingent on digital submission through the BonfireHub platform. Compliance with these disclosure obligations is mandatory for all prospective subcontractors, regardless of size or prior relationship, to maintain the credibility and impartiality of Broward County’s procurement system.
Broward County

POSTED

about 22 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541611
New
International
City of Edmonton - Request for Proposal - 935720 - Functional Programming Specialty Consultant Services Standing Arrangement
Solicitation # AB-2026-05589
The City of Edmonton is seeking qualified consultants to provide advanced functional programming and planning services under a standing arrangement for facility-related projects across city-owned and leased spaces. This solicitation aims to establish a flexible resource pool capable of delivering expert-level support in master planning, feasibility analysis, scope definition, and budget development for new construction, renovations, alterations, and retrofits. The services required are critical for ensuring timely and accurate project initiation and alignment with municipal objectives, particularly for initiatives with complex timelines or high financial stakes that demand rapid response and specialized knowledge. Consultants selected under this arrangement will be called upon as needed to support various city departments with tailored programming services, allowing the City to efficiently manage diverse and evolving infrastructure needs without the delay of separate procurements. The solicitation, identified as AB-2026-05589, was posted on August 7, 2026, with responses due by September 3, 2026. Proposals must demonstrate experience in municipal facility planning and the capacity to deliver high-quality deliverables under tight constraints. Primary point of contact for this opportunity is Senior Buyer Animot Afolabi, reachable via email or phone for inquiries related to the procurement.
City of Edmonton

POSTED

about 22 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541611
New
SLED
HUB Subcontracting Plan Development and ComplianceThe contract requires the development and implementation of a Historically Underutilized Business (HUB) Subcontracting Plan for the Texas Department of Transportation. This includes identifying qualified HUB vendors, establishing mechanisms to track subcontractor participation throughout the project lifecycle, and ensuring ongoing compliance with state-mandated HUB goals. The successful bidder must design a robust system for monitoring subcontractor performance, maintaining accurate records, and submitting timely compliance reports to demonstrate adherence to HUB participation requirements. The plan must align with Texas state regulations and be executed in a manner that promotes meaningful economic opportunity for historically underutilized businesses. All activities must be carried out in accordance with the North American Industry Classification System code 541611, which relates to management consulting services, indicating the need for strategic planning and administrative oversight. The opportunity is open for response until August 21, 2026, and performance is expected to support transportation initiatives across the state, with no specific location restricted beyond the broader scope of Texas.
Texas Department Of Transportation

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 561410
New
International
Publications Management
Solicitation # W8485-26SH01/A
The Department of National Defence is seeking comprehensive Publication Management Services and Interactive Electronic Technical Manual Services to support approximately 1,600 technical publications under the Directorate of Aerospace Equipment Program Management (Fighters and Trainers). The scope includes the full lifecycle management of these publications, from creation and amendment to delivery and maintenance, with a primary focus on S1000D-compliant XML-based IETMs and PDF formats. The work requires strict adherence to Canadian federal standards including D-LM-008-022/SG-000 for packaging, D-LM-008-002/SF-001 for marking, and S1000D-B6865-01000-00 Issue 4.1 for technical documentation formatting, as well as ISO 9001:2008 and internal DND quality procedures. All deliverables must be submitted electronically to designated DND authorities and include updated distribution lists, change registers, business rules, DVD media with labeling, and compliance certificates, with final acceptance vested solely in the Government of Canada within 45 calendar days of submission. The contract will be awarded using a Lowest Price Technically Acceptable approach, where bidders must first meet all mandatory technical criteria outlined in Annex C—such as PDF export capability, IETM navigation, alphanumeric ordering by NDID, and change tracking—before financial evaluation is conducted. No numerical weights are assigned, and only technically acceptable offers proceed to price comparison. The contract runs from award through September 30, 2030, with no renewal options, and is structured as a Firm Fixed Price arrangement based on defined task rates. All bidders must hold a SECRET-level facility security clearance and ensure all personnel with access to classified information have equivalent personnel clearances, in compliance with the Contract Security Program and Annex E. Contractors must also be registered in the Controlled Goods Program and adhere to Employment Equity Act requirements if they employ 100 or more Canadians, with additional integrity declarations mandatory for any criminal convictions. Electronic submissions via epost Connect are required and take precedence over paper submissions, which must comply with strict environmental standards including recycled content, duplex printing, and no plastic binding. No contract value is disclosed as pricing in Annex D consists solely of evaluation estimates, and no CLIN or SLIN pricing data is provided in the solicitation.
Document Preparation Services

POSTED

about 13 hours ago

DEADLINE

in 20 days
View Details
NAICS: 541330
New
International
Technical Data Package (TDP) Management and Compliance SupportThe contract is for the secure handling, version control, change management, and compliance auditing of the Technical Data Package to ensure full alignment with military specifications during manufacturing. It requires rigorous protocols to maintain data integrity, track revisions, and enforce adherence to defense standards throughout the product lifecycle. All activities must be conducted in a manner that supports audit readiness and regulatory compliance, with emphasis on controlled access, documentation traceability, and seamless integration with manufacturing processes. This subcontract, issued by the Government of Canada through the Department of National Defence, is open for response until August 28, 2026, and is categorized under NAICS code 541330. Performance is expected to occur in Canada, specifically in Edmonton and Montréal. The scope demands specialized expertise in technical documentation management within a high-assurance defense environment, with no set-aside provisions indicated. All work must meet stringent governmental requirements for security, accuracy, and accountability to support national defense manufacturing objectives.
Engineering Services

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 484121
New
International
Domestic and Cross-Border Logistics and DeliveryThe contract involves the domestic and cross-border transportation of finished military units to Canadian Forces Supply Depots located in Montreal and Edmonton, encompassing full logistics management from scheduling to final delivery. Responsibilities include coordinating timely pickup and transit, ensuring compliance with all customs requirements for cross-border movement, and providing documented proof of delivery upon arrival. The work is classified as a subcontract under the NAICS code 484121, indicating it pertains to general freight trucking services, and is issued by the Department of National Defence on behalf of the Government of Canada. Performance is required across multiple locations within Canada, with no specific domestic or international origin specified, implying that shipments may originate from within Canada or from abroad. The opportunity was posted on August 7, 2026, with responses due by August 28, 2026, and is open to qualified subcontractors capable of meeting the stringent operational and documentation standards expected by Canadian defence logistics.
General Freight Trucking, Long-Distance, Truckload

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 561910
New
International
Packaging, Preservation, and Labeling ServicesThe contract requires the provision of military-compliant packaging and preservation services, including corrosion protection measures, to ensure the integrity of equipment and materials during transport and storage. All items must be labeled in both English and French, feature proper barcoding for tracking and inventory management, and be unitized in accordance with defense standards to facilitate secure and efficient handling. The scope encompasses the full lifecycle of packaging and labeling, from initial preparation to final deployment readiness, tailored to meet the rigorous demands of military logistics. This subcontract opportunity is issued by the Department of National Defence under the Government of Canada, with performance expected to take place in Canada, specifically in Edmonton and Montréal. The solicitation was posted on August 7, 2026, and responses are due by August 28, 2026. Classified under NAICS code 561910, the requirement targets specialized packaging and preservation service providers capable of meeting federal defense standards and bilingual regulatory requirements. There is no set-aside designation specified, and the opportunity is open to qualified subcontractors with the technical capability to deliver compliant solutions under strict military protocols.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 423510
New
International
Supply of Raw Materials and Components for Kit AssemblyThe contract involves the supply of military-grade raw materials such as steel, aluminum, and advanced composites, along with associated components including fasteners and brackets, all required for kit assembly operations. Full traceability of every material and component is mandatory, with strict adherence to Technical Data Package specifications ensuring alignment with defense-grade standards. Performance of the work is designated for locations across Canada, specifically Edmonton and Montréal, with all deliveries and submissions expected to meet rigorous quality and documentation protocols. The contract is classified as a subcontract under NAICS code 423510 and is issued by the Department of National Defence under the Government of Canada. The solicitation was posted on August 7, 2026, with a response deadline of August 28, 2026, providing potential suppliers a limited window to prepare and submit proposals. There is no set-aside designation indicated, meaning eligibility is open to all qualified vendors. While no point of contact is listed, all submissions must comply with the requirements outlined in the technical specifications and be delivered through the designated government procurement portal.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 332999
New
International
Manufacture of Support Kit Overhead Protection UnitsThe contract calls for the full production of military-grade Support Kit Overhead Protection units, requiring strict adherence to the Technical Data Package to ensure all specifications are met. This includes end-to-end manufacturing activities such as fabrication, assembly, and rigorous quality control processes, with all units prepared for government inspection and acceptance. The work must be executed in compliance with defense standards and delivered in a manner that guarantees mission readiness and operational reliability under demanding conditions. The contract is issued under the Department of National Defence, Government of Canada, and is classified as a subcontract with a North American Industry Classification System code of 332999. Proposals are due by August 28, 2026, with the opportunity posted on August 7, 2026. Performance is to take place in Canada, specifically in Edmonton and Montréal, ensuring local production and logistical alignment with Canadian defense infrastructure. All deliverables must be fully compliant with Canadian military requirements and capable of withstanding inspection by authorized government representatives.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 484220
New
International
Logistics, Delivery & Packaging ServicesThe contract entails the domestic logistics, delivery, and packaging of 35 Personal Locator Beacons (PLBs) to various tactical helicopter squadrons located across Canada. All units must be securely packaged and properly labeled in strict compliance with specified standards to ensure safe handling, identification, and regulatory adherence throughout the supply chain. Delivery must be completed to designated military locations, with verifiable confirmation provided for each shipment to guarantee accountability and traceability from origin to final destination. The work is classified as a subcontract under NAICS code 484220, indicating specialized freight transportation services, and is issued by the Department of National Defence on behalf of the Government of Canada. Performance of the contract is required throughout Canada, with no specific city or regional limitation, reflecting the nationwide operational requirements of the recipient units. The opportunity was posted on August 7, 2026, with responses due by September 2, 2026, providing bidders a limited window to prepare and submit offers for this time-sensitive logistics requirement.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 25 days
View Details
NAICS: 334511
New
International
Alternate Product Substitution & Technical Compliance SupportThe contract requires the submission of equivalent programmable lead beacon (PLB) models that match the technical specifications and performance of the ACR Resqlink 400, along with comprehensive documentation proving full technical equivalency. This includes detailed performance data, alternate part numbers for the proposed replacements, and a justified rationale for each substitution that demonstrates identical or superior functionality, reliability, and compliance with operational requirements. All submitted materials must establish that the alternative models meet or exceed the original device’s capabilities in all critical areas such as signal transmission, battery life, durability, and regulatory certification. The opportunity is issued under the Department of National Defence of the Government of Canada and is classified as a subcontract with a NAICS code of 334511, indicating it pertains to communications equipment manufacturing. The deadline for responses is September 2, 2026, and the place of performance is in Canada. Although no specific point of contact or office address is provided, the tender is accessible through the Canada Buys portal and is open to suppliers capable of fulfilling the technical and documentation requirements without reliance on the original ACR product. The substitution must be fully defensible from a procurement, safety, and operational standpoint to ensure seamless integration into existing systems.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 25 days
View Details
NAICS: 334511
New
International
Supply of 406 MHz Personal Locator Beacons (PLBs)The contract seeks the procurement and delivery of 35 units of ACR Resqlink 400 or equivalent 406 MHz personal locator beacons that meet COSPAS-SARSAT international distress signaling standards. Each unit must be equipped with GPS and Galileo global navigation satellite system capabilities to ensure accurate location transmission during emergency situations, and must support dual-frequency signaling for enhanced signal reliability and global coverage. The beacons are required to be environmentally durable, capable of withstanding harsh outdoor and marine conditions to ensure operational readiness in extreme climates and rugged terrain. All devices must comply with current international maritime and aviation safety protocols and be ready for immediate deployment upon delivery. The contract is issued as a subcontract under the Department of National Defence, Government of Canada, with a posting date of August 7, 2026, and a submission deadline of September 2, 2026. The place of performance is designated as Canada, indicating that all beacons must be delivered to Canadian government facilities or designated operational locations within the country. The North American Industry Classification System code 334511 applies, identifying the procurement as related to the manufacturing of navigational, measuring, electromedical, and control instruments. There is no set-aside designation specified, meaning the contract is open to all eligible suppliers without preference for small businesses or other categories. The procurement is managed through Canada Buys, the federal government’s electronic tendering system.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 25 days
View Details
NAICS: 334118
New
International
User Interface and On-Site Display DevelopmentThe contract seeks the design and supply of a ruggedized, sunlight-readable on-device display specifically engineered for real-time visualization of weather parameters in demanding field conditions. The system must reliably operate in outdoor environments where visibility under direct sunlight, temperature extremes, moisture, dust, and physical shocks are common, ensuring that personnel can access critical meteorological data without interruption. The display must integrate seamlessly into existing field equipment, maintain high readability under all lighting conditions, and deliver accurate, low-latency updates of weather metrics with minimal power consumption. This subcontract, issued by the Department of National Defence under the Government of Canada, is focused on enhancing operational readiness in the National Capital Region and beyond by equipping field teams with hardened, mission-critical display technology. The solicitation, posted on August 7, 2026, requires proposals to be submitted by August 26, 2026, and is categorized under NAICS code 334118 for other computer equipment manufacturing. The delivery location is tied to Canada’s National Capital Region, and while specific technical requirements are not detailed here, the emphasis is on durability, real-time performance, and suitability for military or defense-related field operations.
Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 18 days
View Details
NAICS: 335911
New
International
Solar and Battery Power System SupplyThe Department of National Defence under the Government of Canada is seeking a subcontractor to supply integrated solar charging and battery systems designed for sustained operation in extreme cold and low-light environments. The contract, posted on August 7, 2026, with a response deadline of August 26, 2026, falls under NAICS code 335911, indicating a focus on manufacturing other electrical equipment and components. The systems must reliably generate, store, and deliver power under harsh Arctic and sub-Arctic conditions where conventional energy sources are impractical or insufficient. Performance is expected to meet stringent operational requirements for defense applications, ensuring continuous power availability for critical equipment and infrastructure in remote or mission-critical locations across Canada’s National Capital Region and other northern territories. The place of performance is specified as Canada’s National Capital Region, though deployments may extend into remote areas requiring resilient energy solutions. All proposals must demonstrate technical capability, proven performance in extreme climates, durability, and adherence to Canadian defense standards without requiring modifications to existing fielded systems.
Storage Battery Manufacturing

POSTED

1 day ago

DEADLINE

in 18 days
View Details
NAICS: 811212
New
International
In-Service Support and Technical Field SupportThe contract pertains to ongoing technical support, maintenance, troubleshooting, and field repair services for deployed DWOS units throughout its entire lifecycle, ensuring continuous operational readiness and system reliability. Services are expected to be delivered in support of government assets stationed within Canada’s National Capital Region, with the contractor responsible for rapid response, on-site repairs, preventive maintenance, and technical resolution of system anomalies. All work must align with the standards and protocols established by the Department of National Defence, Government of Canada, and must be performed in a timely and efficient manner to minimize system downtime. This is a subcontract opportunity under NAICS code 811212, with a posted date of August 7, 2026, and a response deadline of August 26, 2026. The contract is not subject to any set-aside provisions, and the place of performance is confined to Canada’s National Capital Region. Contractors must be prepared to provide comprehensive on-the-ground support, including travel and logistics for field technicians, and must demonstrate the capability to handle complex technical issues across a distributed operational environment. All services are critical to sustaining the functionality and performance of DWOS units in support of national defense obligations.
Computer and Office Machine Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 18 days
View Details