This Combined Synopsis/Solicitation opportunity from National Aeronautics And Space Administration was posted on June 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

One Pyroprobe® 6200 Pyrolyzer with accessories and installation

Closed

80NSSC26P0796-1Federal

Submission Closed06/29/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

SLED

NDSU - Dynamic Mechanical Analyzer

Solicitation # SRC000482

North Dakota State University is soliciting bids under solicitation SRC000482 for the procurement of a complete Dynamic Mechanical Analyzer (DMA) system to support polymer testing research on electrically responsive surface textures for autonomous platforms. The required system must support bending, tension, and compression modes, feature a normal force sensor range of 0.001 N to 50 N, and operate within a temperature range of -170 °C to +600 °C. The base bid must include all necessary hardware, sensors, fixtures, first-year software licenses, delivery, installation, commissioning, training, and a one-year warranty. Optional additions may include rotational or torsional capabilities and multi-year software support. The contract will be awarded to the lowest responsive and responsible bidder who meets all mandatory technical specifications. Bidders must submit their responses electronically via the NDBuys portal by November 4, 2026, at 2:00 PM CT, including a completed Cost Proposal Form and a Technical Compliance Form. Delivery and installation are required at the R1A Laboratories in Fargo, North Dakota, with a target window of Fall 2026 or January 2027. Final acceptance is contingent upon a successful functional demonstration and the completion of required training. The selected contractor must adhere to NDSU's independent contractor terms, including maintaining minimum liability insurance of $500k/$2M and complying with North Dakota Open Records Law.

POSTED

DEADLINE

Supply of Electrical Resistance Temperature Transmitters

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Borescope Extension TubesThis subcontract involves the procurement or manufacture of 2,000 specialized borescope extension tubes matching NSN 6650014701315. These components are intended for prime contractors supporting DLA Weapons Support contracts. The selected provider must ensure all items are packaged according to ASTM D3951 standards and that marking and labeling comply with MIL-STD-129. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Operating under NAICS code 334516, the solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

TUBING, LYSE, ANALYZER, H

Solicitation # SPE2DH-27-T-0288

Solicitation SPE2DH-27-T-0288 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of one unit of hematology analyzer lyse tubing, identified by NSN 6630-01-525-5546 and manufacturer part number 6805686 from Beckman Coulter Inc. The requirement is for a device regulated by the FDA, with a required delivery date of October 27, 2026, and a delivery window of 84 days after receipt of order. Delivery is specified as FOB Destination to the USA Medical Materiel Center in Korea. The contract mandates strict adherence to Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical marking, and requires packaging in accordance with MIL-STD-2073-1E and special instructions MPPWN00001. Inspection and acceptance will occur at the destination. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program, DFARS cybersecurity reporting standards, and hazardous material labeling per 29 CFR 1910.1200. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 3, 2026, via the DIBBS portal.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

System Sourcemeter-Dual Channel (200V) SupplierThis subcontract, issued by Ornl Ut-Battelle Llc under the Department of Energy, involves the procurement of high-precision Dual Channel System Sourcemeters (200V) and compatible power cords. These components are intended for prime contractors working on scientific equipment projects at the Oak Ridge National Laboratory in Oak Ridge, Tennessee. The supplier is responsible for delivering hardware according to a specific Bill of Materials. The contract mandates strict adherence to several regulatory and security standards, including the Buy American Act and DOE O 205.1D. To ensure supply chain integrity and the protection of Controlled Unclassified Information, the supplier must comply with NIST SP 800-161 and NIST SP 800-171. The opportunity was posted on October 27, 2026, with a response deadline of November 3, 2026, falling under NAICS code 334516.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Supply of High Finesse WS8-2 Wavemeter SystemThis subcontract, managed by the Department of Defense agency FA8601 Aflcmc Pzio, involves the supply of one High Finesse WS8-2 wavemeter system to support prime contractors on Air Force Institute of Technology projects. The delivery includes a fully configured system comprising hardware, firmware, and software, specifically featuring a MCLC8 multi-channel switch, an absolute Rb reference source, and a PID controller designed for laser frequency stabilization. The project will be performed at Wright Patterson AFB and falls under NAICS code 334516. To ensure security and regulatory adherence, the provider must maintain compliance with CMMC Level 1 and DFARS 225.872. The solicitation was posted on October 27, 2026, with a response deadline of November 12, 2026.

POSTED

DEADLINE

Microbiology Analyzers and Incubators SupplyThis subcontract opportunity with the Department of Veterans Affairs Network Contract Office 8 involves the supply of automated instrumentation for microbial incubation and ID/AST testing. The scope of work requires the delivery and installation of operational equipment, including large and medium capacity redundant analyzers, MALDI-TOF Mass Spectrometry systems, and blood culture incubators with a capacity exceeding 400 bottles. All provided equipment must strictly adhere to FDA guidelines and VA Directive 6550 Appendix A. The project is based in Tampa, Florida, under NAICS code 334516. Interested parties must submit their responses by November 10, 2026.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Baxter/Hill-Rom Helux Pro Surgical Light System

Solicitation # 75N98027Q00038PCA-NIA-11810

The National Institutes of Health, through the National Institute on Aging, is seeking a firm fixed-price contract for the procurement, delivery, and turnkey installation of a Baxter/Hill-Rom Helux Pro Surgical Light system. This acquisition is intended for the NIA Clinical Research Unit in Baltimore, Maryland, to support invasive outpatient biopsy procedures and maintain clinical continuity. The scope of work includes the de-installation of obsolete hardware and the installation of a medical-grade LED lighthead with a ceiling-mounted single-arm suspension. Technical requirements specify a Color Rendering Index of 95 or higher, deep-red rendering of 90 or higher, and support for DICOM imaging standards via a 55-inch wall-mounted 4K/UHD monitor. This is a combined synopsis and solicitation conducted under FAR Part 12.6 for commercial items, and it is not expected to exceed the simplified acquisition threshold. The contract is open to full and open competition and is not set aside for small businesses, falling under NAICS code 334516. Award will be based on the best value, considering price and other factors such as warranty, lifecycle cost, and maintenance availability. A minimum one-year OEM warranty is required, supplemented by multi-year agreements for the lighthead and integrated system. Interested offerors must be registered in the System for Award Management and submit their proposals by December 8, 2026, at 2:00 PM EST.

National Institutes Of Health Olao

POSTED

DEADLINE

Carl Zeiss Microscopy, LLC, SmartZoom 5, and options

Solicitation # RFQSSPR511693

Oak Ridge National Laboratory, under the Department of Energy, is soliciting firm fixed price quotations for the procurement of a Carl Zeiss Microscopy SmartZoom 5 system and associated options for the Enrichment Science and Engineering Division. The required equipment includes a SmartZoom 5 optical engine with integrated 10x zoom, a motor tiltable stand, a scanning stage, specific PlanApo objectives, a rotatable polarizer, a diffuser, a control unit with wireless peripherals, and an all-in-one control PC running Windows 11 2024 LTSC. While the requirement specifies Carl Zeiss, brand name or equal provisions apply. Award will be granted to the lowest priced, technically acceptable proposal from an authorized reseller. The seller is responsible for all packing and shipping to ensure the system arrives at the Oak Ridge, Tennessee site in undamaged, working condition, with domestic shipments handled as FOB Destination and international shipments preferred as Delivered at Place. Key deliverables include a calibration certification traceable to SI or ILAC MRA standards and documentation verifying that products match catalog specifications. The contract incorporates various FAR and DOE regulations, including strict cybersecurity standards based on NIST SP800-161 and DOE O 205.1D, as well as prohibitions on certain telecommunications equipment. Offerors must provide a lead-time, country of origin, and completed abbreviated representations and certifications by the November 6, 2026, deadline.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

High-Precision Wavemeter

Solicitation # FA860127Q0020

The United States Air Force, through the Air Force Life Cycle Management Center at Wright-Patterson Air Force Base, Ohio, is conducting market research via a Sources Sought notice to identify capable providers for a High-Precision Wavemeter. The requirement is for the Air Force Institute of Technology to procure one High Finesse WS8-2 wavemeter equipped with a multi-channel switch and an absolute Rb reference source. The scope includes the delivery of all necessary hardware, firmware, software, installation, and operational training to support physics research. Technical specifications require a wavelength range of 390-1180 nm, a measurement resolution of 200 kHz, a measurement speed of 1 kHz, and the ability to measure up to eight channels simultaneously. Absolute accuracy must be ±10 MHz for the full range and ±2 MHz within ±2 nm of the reference source, with a calibration source wavelength of 780.24 nm. Interested parties must submit a capability package by November 12, 2026, including company identification, CAGE code, UEI, and socio-economic status under NAICS code 334516. Submissions must demonstrate past experience with similar projects, commercial sales history, and facility capabilities. A mandatory requirement for all offerors is CMMC Level 1 compliance, which must be self-certified in the Supplier Performance Risk System. While a set-aside decision has not yet been made, the government is considering a small business set-aside and requires detailed information on teaming arrangements and compliance with limitations on subcontracting. This notice is for market research purposes only and does not constitute a binding contract offer.

POSTED

DEADLINE

6632--FY27 Microbial Incubation ID and Susceptibility CPT

Solicitation # 36C24827Q0029

The Department of Veterans Affairs is conducting market research through a Sources Sought Notice to identify qualified vendors capable of providing a comprehensive Microbial Incubation, Identification (ID), and Antimicrobial Susceptibility Testing (AST) system for the James A. Haley Veterans Hospital in Tampa, Florida. The requirement includes the delivery and installation of two redundant analyzers—one large capacity and one medium capacity—along with incubators, middleware, and hardware and software for up to ten workstations. Technical specifications require a bi-directional, bar-coded computer interface compatible with VA laboratory systems and specific sensitivity and resolution standards for MALDI TOF systems. The scope also encompasses a continuous supply of reagents, calibrators, and consumables, which must have a minimum shelf life of six months upon delivery. Interested parties must submit a brief capability statement by November 10, 2026, including their SAM Unique Entity ID, socioeconomic status, and evidence of their ability to meet the functional requirements under NAICS code 334516. Respondents should identify available contract vehicles, such as GSA FSS or NASA SEWP, and provide estimated timelines for delivery, validation, and software implementation. The government will evaluate submissions based on technical specifications, manufacturer reputation, and the ability to provide a tiered pricing structure for cost-per-test (CPT) models. This notice is for planning purposes only and does not constitute a formal solicitation; however, it establishes strict requirements for data security, NARA-compliant data destruction, and mandatory personnel training for any future awarded contractor.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

6640--Notice of Intent to Sole Source - Roche Tests - NIHCS

Solicitation # 36C25027Q0074

The Department of Veterans Affairs, VISN 10, Northern Indiana Health Care System, intends to award a firm fixed price contract for reagents to Roche Diagnostics Corp. under the authority of FAR Part 6.302-1, which identifies only one responsible source. This procurement, categorized under NAICS code 334516, is being conducted via Simplified Acquisition Procedures. The reagents are specifically required for use with existing Roche Cobas Pros instruments at the Northern Indiana VAHCS facility in Marion, Indiana. The scope of the requirement includes a comprehensive list of diagnostic tests and reagents, featuring high-volume items such as Creatinine, Potassium, Sodium, and Urea Nitrogen/BUN, as well as various toxicology and hormone tests. As this is a Notice of Intent to Sole Source, it is not a formal solicitation for proposals. Any party wishing to challenge this intent must provide clear and convincing evidence that competition would be advantageous to the government by 12:00 pm on October 30, 2026. The primary point of contact for this action is Contract Specialist Rachel MacRae.

250-NETWORK Contract Office 10 (36C250)

POSTED

1 day ago

DEADLINE

in 2 days

AI Contract Overview

NASA Goddard is procuring a single Pyroprobe® 6200 Pyrolyzer with all required accessories and full installation at its Greenbelt, Maryland facility, under a brand-name requirement that mandates the exact specified product and prohibits substitutions. This solicitation, numbered 80NSSC26P0796-1, is restricted to OEM-authorized distributors only and is set aside exclusively for small businesses under NAICS code 334516, with eligibility contingent upon active SAM.gov registration and verified small business status. The contract is evaluated on a Lowest Price Technically Acceptable basis, where offers must first meet a binary technical threshold—including NIST-traceable ±0.1°C temperature accuracy, full compatibility with PerkinElmer GCMS systems, OEM-certified installation and training, and integration with the existing analytical platform—before price becomes the sole deciding factor. The winning offeror must deliver and commission the system within four weeks of purchase order issuance, with FOB Destination terms placing acceptance responsibility at the Greenbelt delivery site. All shipments must comply with duty-free entry provisions under FAR 52.225-8, requiring specific customs documentation and advance notification to the Contracting Officer for foreign-sourced components. Contracting personnel must undergo Personal Identity Verification under FIPS 201 standards, and export controls under ITAR and EAR apply, including restrictions on foreign person access to technical data. The contractor is responsible for proper packaging and marking with U.S. Government identifiers and duty-free declarations, though no specific MIL-STD packaging standards are mandated. Proposals must be submitted via email to Lindsey McLellan by June 29, 2026, at 4:00 p.m. Central Time, with the solicitation number clearly included in the subject line. Additional compliance obligations include whistleblower notifications, denial of facility access for non-compliant personnel, and strict controls over sensitive NASA information. No contract value is listed, as pricing will be determined through offeror submissions.

General Info

Small business RFQ for Pyroprobe® 6200 Pyrolyzer with accessories and installation, due June 29, 2026.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Greenbelt, MD, 20771, USA

Set-Aside

SBA

Documents

NASA Sole Source Brand Name Justification for Pyroprobe 6200 Acquisition

justification-and-authorization

High

Pyroprobe 6200 Pyrolyzer Unit Statement of Work

sow

High

RFQ 80NSSC26P0796-1 One Pyroprobe 6200 Pyrolyzer

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 23

Combined Synopsis

Response DeadlineJun 29

Deadline has passed

Submission Closed

06/29/2026, 09:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts1 person available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

Lindsey McLellan

contact@example.gov

Full Description

NASA Goddard has a brand name requirement for One Pyroprobe® 6200 Pyrolyzer with required accessories and installation. See the attached SOW, Brand Name Justification, and RFQ document for the full details of this requirement.

RFQ is for OEM Authorized Distributors only.

All correspondence must reference ID 80NSSC26P0796-1 in the subject line to ensure visibility.