Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

OPTICAL LAB EQUIPMENT

Active
N0016426Q0282Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting a sole source procurement for optical lab equipment, specifically PLX periscope and retroreflector systems, under solicitation number N0016426Q0282. The acquisition is designated as firm fixed price and commercial, with only PLX Inc. identified as the sole responsible source due to its proprietary rights and exclusive ownership of the required technology, which it refuses to transfer to the government. This procurement is authorized under FAR 12.102, and while other vendors may submit capability statements, the government retains full discretion to proceed without competition. The requirement falls under NAICS code 333310 and is not subject to any small business set-aside. All offerors must be currently registered in the System for Award Management (SAM) to be considered. Responses are due by 3:00 PM Eastern Time on August 10, 2026, and must be submitted electronically to Danielle Richardson at danielle.n.richardson12.civ@us.navy.mil. The solicitation was posted on July 31, 2026, and no synopsis is being published due to the sole source justification under FAR 5.202(a)(13). Interested parties are responsible for monitoring sam.gov for any amendments issued prior to the deadline; only those who submit quotes will receive updates if changes occur after the closing date. The place of performance is Crane, Indiana, and the procurement is managed by the Department of Defense.

General Info

U.S. Navy sole source procurement for PLX periscope systems from PLX Inc. under FAR 12.102, firm fixed price, no competition.

Agency

Department Of Defense → Nswc CraneView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

Crane, IN, 47522, USA

Set-Aside

NONE

Documents

(2)

N0016426Q0282_SYNOPSIS.pdf

PDF

Solicitation+-+N0016426Q0282.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
Contacts1 person available
OfficeCRANE, IN, 47522-5001, USA
Organization / Agency
Department Of Defense → Nswc Crane
View Agency Profile
Office AddressCRANE, IN, 47522-5001, USA
Contacts
Danielle Richardson
contact@example.gov

Full Description

Show more

N0016426Q0282 – SOLE SOURCE –OPTICAL LAB EQUIPMENT – FSG 6650 - NAICS 333310


ISSUE DATE 31 JULY 2026 – CLOSING DATE 10 AUGUST 2026 – 3:00 PM Eastern Time


ITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane has a requirement for a firm fixed price, commercial, sole source procurement for the acquisition of PLX periscope and retroreflector optical lab equipment.


SOLE SOURCE PROCUREMENT- The proposed contract action is for the supplies for which the Government intends to solicit and negotiate with one source only, PLX Inc. 40 W Jefryn Blvd., Deer Park, New York, 11729-4720 under the authority of FAR 12.102.  This is being sole sourced because there is only one responsible source, and the source has established proprietary rights which it is not willing to sell to the Government. All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.


Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov.


This solicitation is being issued pursuant to the procedures at FAR 12.102.  Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N0016426Q0282 is hereby issued as an attachment hereto. 


All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/.  It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation. 


For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award.


Offers shall be e-mailed to Danielle.n.richardson12.civ@us.navy.mil.   All required information must be received on or before 10 AUGUST 2026 3:00 pm EASTERN TIME.

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
FILTER, WATER PURIFI
Solicitation # SPE8E8-26-T-3721
The contract is for the procurement of 29 units of a water filter with part number ED-17-TL and NSN 4610-01-723-3097, issued by DLA District San Joaquin under solicitation SPE8E8-26-T-3721. The unit price is $29.00 per unit, with a total contract value of $841.00, and delivery is required within 166 days from award, with an original required delivery date of November 23, 2026. The shipment must be delivered FOB origin, with zero variance in quantity accepted, and both inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including specific mandates for labeling and marking in accordance with MIL-STD-129 and palletization per RP001. All packaging and documentation must adhere to DLA procurement standards, including the removal of government identification from non-accepted supplies and submission of source approval documentation. The delivery address is the DLA receiving warehouse in Tracy, California, and transportation procedures follow DLAD Proc Notes C19 and C20. The solicitation was posted on July 31, 2026, with responses due by August 5, 2026, and the item falls under NAICS code 333310 for manufacturing machinery.
DLA DIST SAN JOAQUIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
DIBBS
FILTER, WATER PURIFI
Solicitation # SPE8E9-26-T-2456
This contract specifies the procurement of 19 units of a water filter with NSN 4610-01-723-3097 and part number ED-17-TL from BUNN-O-MATIC CORPORATION under solicitation SPE8E9-26-T-2456. The delivery is required within 20 days FOB destination with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. All items must be packaged and labeled in strict compliance with MIL-STD-129 and ASTM D3951, although any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. Packaging must follow DLA’s RP001 standards including palletization, and the unit of issue is each. The delivery address is a military freight point in FPO AP 96671, and transportation procedures must adhere to DLAD PROC NOTES C19 and C20. The required delivery date is April 9, 2026, and the contract enforces adherence to all source approval documentation rules, government identification removal protocols, and quality specifications outlined in the DLA Master List. The acquisition is classified under NAICS code 333310 and managed by the Department of Defense's Construction & Equipment MRO Service I office, with Damian Panto as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
DIBBS
TESTER, ACETYLENE
Solicitation # SPE7M4-26-T-271J
The contract is for the procurement of two units of an acetylene tester, designated as a critical application item with part number C3-019-99-003 from Subsea Air Systems LLC and NSN 4940012744587, to be delivered FOB origin to DLA Distribution Cherry Point in North Carolina within 157 days after order, with an original required delivery date of April 26, 2027. The contract falls under a simplified acquisition procedure and is governed by FAR and DFARS clauses, including a firm-fixed-price contract type under Alternate I of 52.216-1, and requires full compliance with cybersecurity standards through clause 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, aligned with CMMC Level 2 self-assessment requirements. All packaging and marking must adhere to MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling and barcoding, with palletization following DLA packaging requirements, and no special marking is needed beyond standard commercial requirements. Hazard communication standards under 29 CFR 1910.1200 mandate the use of Safety Data Sheets and updated HCS-compliant labels for any hazardous materials, requiring supplier submission and approval prior to award, along with employee training; the use of mercury or mercury-containing compounds is strictly prohibited except for specific, approved applications such as batteries, fluorescent lights, and instruments specified by NAVSEA, which must include a secondary containment barrier. Delivery is subject to government inspection and acceptance at the destination, with payment processed exclusively through the Wide Area WorkFlow system, and the contractor must maintain active registration in the System for Award Management. The contract includes provisions for whistleblower rights, prohibitions on forced arbitration, restrictions on acquiring telecommunications equipment from communist Chinese military companies, and compliance with NIST SP 800-171 for protecting controlled unclassified information. No pricing details are provided in the contract document, but the quantity is fixed at two units with zero tolerance for variance, and the acquisition is subject to all applicable socioeconomic program representations and certifications as required by FAR 52.219-28 and related clauses.
FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
DIBBS
NON-NSN ITEM
Solicitation # SPE3SE-26-Q-0351
This is a sources-sought notice issued by DLA Troop Support under solicitation number SPE3SE26Q0351 for food service equipment to be delivered and installed at Camp Pendleton, California, with a response deadline of July 2, 2026. The notice seeks industry feedback to determine the optimal acquisition approach and does not constitute a formal solicitation or binding contract. Respondents must demonstrate the capability to supply specific equipment including flight-type dishwashers, tabling, power soaks, waste collectors, and stationary gas kettles, with all items to be shipped FOB Destination and installation services included as a required component of performance. The notice does not include pricing, contract value estimates, or award methodology, as its purpose is to assess market availability and capability prior to initiating a formal procurement. All responses must be directed to the designated point of contact, Griffin Peterson at Griffin.Peterson@dla.mil, with Timothy Coyle available for additional inquiries. The procurement falls under NAICS code 333310 and is not reserved for any specific set-aside category. No contract clauses, evaluation factors, packaging requirements, inspection criteria, or representations and certifications are included in this notice, as it is purely an information-gathering tool. The place of performance is firmly established at Camp Pendleton, CA, with the contracting office located in Philadelphia, Pennsylvania. Industry feedback received will inform whether the requirement will be issued as a small business set-aside, full and open competition, or another acquisition strategy, and will guide the development of a subsequent formal solicitation that will contain binding terms and conditions.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
LIFE PRESERVER, VEST
Solicitation # SPE8E6-26-T-3762
The contract calls for the procurement of 500 medium-sized orange life preserver vests with NSN 4220012520500, supplied by Mustang Survival Inc. under part number MV3128-T2, under solicitation SPE8E6-26-T-3762. Delivery is required within 27 days after award, with FOB origin terms, and all items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply with MIL-STD-2073-1E using clean and dry preservation methods, with no preservation, wrap, or cushioning materials applied, and marking must adhere to MIL-STD-129 without any special markings. The item contains no asbestos as defined in Fed-Std-313 and no intentional mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or naval chemical reagents specified by NAVSEA—portable fluorescent lamps and instruments containing mercury must include a second containment boundary and be shockproof per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List, and the vendor must meet all applicable DFARS and FAR clauses, including safeguarding covered defense information, cybersecurity incident reporting, and compliance with hazardous material handling standards. The solicitation is a total small business set-aside under NAICS code 333310, requiring offerors to self-certify their small business status and socioeconomic categories such as WOSB, SDVOSB, or HUBZone, and to provide UEIs and CAGE codes if applicable. Inspection and acceptance occur at the destination, with electronic invoicing mandated through WAWF and full compliance with government-specific cybersecurity and supply chain integrity requirements. No unit or total price is specified in the contract line item, and all pricing will be determined upon award.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
DIBBS
KIT, PATTERN GENERAT
Solicitation # SPE7M1-26-T-3999
The contract solicits bids for the procurement of 3,024 units of a kit designated as NSN 1240015456071, specifically a pattern generator kit. The delivery location is specified as W1A8 DLA Distribution, with a delivery timeframe of 161 days after order. The approved source for this procurement is ATP-610 with source code 27410. The solicitation is an RFQ, available only electronically; no hard copies or detailed specifications, plans, or drawings are provided. All responsible and interested suppliers are invited to submit quotes electronically, which will be considered if timely received. This contract, titled "12--KIT,PATTERN GENERAT" under solicitation number SPE7M126T3999, is managed by the Defense Logistics Agency (DLA) Land and Maritime office located in Columbus, Ohio. The solicitation was posted on January 1, 2026, with a response deadline of January 12, 2026. The procurement falls under the NAICS code 333310, which pertains to commercial and industrial machinery manufacturing. Interested parties with questions can contact the buyer via email, and the solicitation documents can be accessed through the provided government procurement website.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
Federal
PA-ALLEGHENY NFH-DRUM FILTER PUMP
Solicitation # 140FS326Q0115
The U.S. Fish and Wildlife Service, under the Department of the Interior, is seeking proposals for the purchase of a drum filter pump under solicitation number 140FS326Q0115, which is exclusively reserved for small businesses as a total set aside. The opportunity, classified under NAICS code 333310 for other commercial and service machinery manufacturing, is open for responses until August 14, 2026, with proposals due by 7:00 PM Eastern Time. The contract will be managed by the FWS SAT Team 3 office located in Falls Church, Virginia, and all performance activities are expected to be carried out without a specified location beyond the federal agency’s operational scope. Point of contact for all inquiries is Merenica Banks, reachable via email at merenica_banks@fws.gov or by phone at 703-358-2072. Interested vendors must submit responses through the SAM.gov portal linked in the posting.
Fws Sat Team 3

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
Federal
Solicitation M67854-26-R-1006 Long Range Thermal
Solicitation # M6785426R1006
The U.S. Marine Corps is preparing to solicit proposals for the Long Range Thermal system under solicitation number M67854-26-R-1006, with a presolicitation notice issued on July 2, 2026. This effort falls under NAICS code 333310, indicating the procurement relates to industrial machinery and equipment manufacturing, and is being handled by the Department of Defense through the Commander’s office located in Quantico, Virginia. The acquisition aims to secure advanced thermal imaging capabilities designed for extended operational ranges, supporting mission-critical surveillance and targeting needs. No set-aside designation has been specified, meaning the contract is open to all eligible businesses regardless of size or status. Point of contact for inquiries is Nate Sudbeck, with Leslie Mojica as the secondary contact, both reachable via their official USMC email addresses. All communications and submissions must align with the upcoming formal solicitation, which will provide detailed technical specifications, evaluation criteria, and submission guidelines. The place of performance has not yet been defined, suggesting that deliverables may be distributed across various operational theaters or require logistics coordination beyond a fixed location. Interested parties should monitor the SAM.gov portal linked in the notice for the official solicitation release and ensure compliance with federal contracting requirements prior to submission.
Commander

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
Federal
Spectral Camera
Solicitation # SSN-CDRH-2026-134060
The U.S. Food and Drug Administration’s Center for Devices and Radiological Health is seeking commercially available portable hyperspectral imaging systems to support scientific research and laboratory testing aimed at evaluating the safety and effectiveness of digital pathology devices. The requirement is for a single portable unit capable of capturing high-resolution spectral data across a wavelength range of 400 nm to 800 nm with at least 200 evenly distributed spectral bands and a spectral bandwidth of 7 nm or less. The system must produce images of at least 512 by 512 pixels with a minimum spectral resolution of 12 bits per pixel, focus from 15 centimeters to infinity, and operate as a standalone device with an integrated display and user interface, eliminating the need for an external computer. It must be powered by an internal rechargeable battery, charge via standard 120V U.S. power, and weigh no more than 2 kilograms, with data stored on portable media for transfer to external systems. The system must be delivered within six weeks of award and include a minimum one-year manufacturer’s warranty and technical support. On-site installation is not required, and training is optional, though electronic or hard-copy user documentation must be provided. This sources sought notice, issued under solicitation number SSN-CDRH-2026-134060, is strictly for market research to determine vendor availability and industry capability, including small business participation, and does not represent a commitment to proceed with procurement. Responses are due by August 7, 2026, and the requirement is categorized under NAICS code 333310. The point of contact for inquiries is Reagan Davis at the FDA’s office in Rockville, Maryland, with performance expected in Silver Spring, Maryland.
FDA Office Of Acq Grant Svcs

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333310
New
Federal
66--ANALYZER,MODULE, IN REPAIR/MODIFICATION OF
Solicitation # N0010426RYABH
The contract involves the procurement of 25 units of an Analyzer, Module, identified by NSN 7H-6650-015634640 and part number 500000-001, to be delivered to DLA Distribution San Diego in California. The Government does not own the technical data or intellectual property rights required to source this component from alternate vendors, and acquiring those rights or reverse engineering the part is deemed uneconomical. This is a sole-source procurement under FAR 6.302-1, authorized due to the unique and irreplaceable nature of the component. Interested parties may submit proposals, quotations, or capability statements within 45 days of the notice date, or 30 days if awarded under an existing Basic Ordering Agreement, though this notice is not a competitive solicitation and the Government retains full discretion on whether to proceed without competition. Award will be contingent upon the offeror, product, or manufacturer meeting all qualification standards in effect at the time of award, as specified in FAR clause 52.209-1. The procurement is designated as a Total Small Business Set-Aside, with the solicitation number N0010426RYABH and a posted date of July 15, 2026, and a response deadline of August 31, 2026. The contracting office is the NAVSUP Weapon Systems Support Mech in Mechanicsburg, Pennsylvania, with Dianne Wydra as the primary point of contact. Technical specifications, military standards, and qualified product lists may be accessed through ASSIST-Online or ordered via the DODSSP website, though drawings, patterns, and deviation lists are not available through these channels. The place of performance is unspecified beyond the delivery point, and all relevant information regarding qualifications and requirements is referenced in the individual solicitation documents.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333310
New
Federal
Wheel Washer
Solicitation # FA483026Q0051
The Government is soliciting competitive bids for a specialized wheel washer system essential to maintaining C-130 aircraft readiness through squadron-level wheel overhaul operations. The contractor must furnish, deliver, install, test, and commission a fully operational unit at the 71st Isochronal Maintenance Facility in Fort Moore, Georgia, with all work required to be completed no later than 90 calendar days after contract award. The equipment must feature a heated wash system, automated brushing, and high-pressure spray cleaning with C-130-specific brushes housed in a chamber measuring a minimum of 26 inches on each side. The cleaning solution must be water-based with no adverse environmental impact, and the system must comply with all applicable industry safety standards for automated and high-pressure machinery. Electrical infrastructure at the site has been pre-installed and the contractor is responsible for ensuring full compatibility. The solicitation is structured as a Firm Fixed-Price contract with a clear cost breakdown required for four distinct line items: the wheel washer unit including initial cleaning solution and brushes, shipping and handling to the delivery location, installation and commissioning labor, and on-site training along with the delivery of comprehensive operation, maintenance, and safety manuals. Proposals must be submitted via email by 10:00 AM EST on July 30, 2026, with attachments limited to .pdf, .doc, or .xls formats. Evaluation will follow a Lowest Price Technically Acceptable approach, where proposals must first pass a mandatory technical compliance threshold—meeting all dimensional, functional, and environmental requirements—before price becomes the determining factor. Delivery schedule and past performance in supplying industrial cleaning or aviation ground support equipment are secondary differentiators. The set-aside is reserved exclusively for small businesses under NAICS code 333310, and no funds are currently available; award will be contingent upon future funding availability. Final acceptance requires successful demonstration of operational capability and formal Government sign-off after installation, testing, and completion of training.
FA4830 23 Cons Cc

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
Federal
OMAX Water Jet Upgrade-Renovation
Solicitation # FA524026OMAX
The Department of the Air Force at Andersen Air Force Base, Guam, is seeking industry input for a potential upgrade to an OMAX waterjet system, targeting an enlargement of the waterjet bed to 5' x 10', installation of a higher capacity tank to improve operational throughput and reduce refill frequency, and implementation of a modernized water filtration system to enhance water quality, system reliability, and maintenance efficiency. This initiative aligns with MFTO-approved standards and is being pursued under NAICS code 333310, Commercial and Service Industry Machinery Manufacturing. The request is currently a Sources Sought Notice, not a formal solicitation, and no binding commitment to award a contract is implied. Responses are voluntary and must be submitted via email to the designated point of contact by the deadline of 7:30 a.m. Chamorro Standard Time on July 6, 2026, or 5:30 p.m. Eastern Standard Time on August 5, 2026. Respondents are advised not to submit proprietary or competitively sensitive information, and any input provided may be incorporated into future solicitation materials. Parties interested in responding must be registered in the System for Award Management (SAM) database to be eligible for any future contract award. Submissions should include company details such as name, contact information, business size classification, applicable NAICS codes, and a description of customary contract terms that could improve contract effectiveness. Companies must also demonstrate their capability to meet the technical requirements by providing product specifications, past performance data, or supporting documentation. No oral submissions will be accepted, and all responses must be sent by email to the listed government representatives. Prospective bidders are responsible for monitoring the SAM.gov website for any future official solicitation, as details including technical specifications and requirements will not be released until a formal procurement action is initiated.
FA5240 36 Cons Lgc

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 333517
New
Federal
BED MILL PACKAGE
Solicitation # N0016426Q0283
The U.S. Navy’s Naval Surface Warfare Center Crane is seeking a sole source procurement for one TRAK DPMRX5 Bed Mill with ProtoTRAK RMX CNC Package under NAICS code 333517, issued as a firm fixed price commercial acquisition authorized under FAR 12. The contract is exclusively awarded to CHARLES JONES MACHINERY INC due to unique technical, physical, and operational requirements that only this vendor can fulfill without risking mission delays or excessive costs. The solicitation is open for quotations from 31 July 2026 through 10 August 2026 at 3:00 PM Eastern Time, with responses required to be emailed to danielle.n.richardson12.civ@us.navy.mil. All offerors must be currently registered in SAM, and while other firms may submit capability statements, the government retains full discretion to proceed without competition. Amendments to the solicitation will be posted on SAM.gov, and it is the vendor’s responsibility to monitor for updates. The point of contact for this procurement is Danielle Richardson, and performance will occur at Crane, Indiana.
Machine Tool Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334511
New
Federal
HYDROPHONE BAFFLE RINGS
Solicitation # N0016426Q0256
The U.S. Navy, through the Naval Surface Warfare Center Crane, is seeking Hydrophone Baffle Rings under a sole source procurement with limited competition authorized under FAR 13.106-1, targeting three previously approved vendors: Brownstown Quality Tool & Automation, LLC, Wagler Competition Products, and Stark Precision Machine. The solicitation, numbered N00164-26-Q-0256, was issued on July 31, 2026, with responses due by 2:00 PM Eastern Time on August 6, 2026, and is classified under NAICS code 334511 for semiconductor and other electronic component manufacturing. Offerors must be registered in the System for Award Management and the Joint Certification Program to access controlled documents, and all submissions must be emailed directly to Jaclyn Bailey at the designated Navy email address. While the Government retains full discretion to proceed without open competition, any responsible source may submit a capability statement, though such submissions are evaluated solely for the purpose of determining whether to initiate a competitive process. The requirement is not subject to any small business set-aside, and all updates or amendments will be published only on Contract Opportunities at sam.gov, making it the sole authoritative source for changes prior to the deadline. Any modifications issued after the closing date will be communicated exclusively to those who submitted offers.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 513210
New
Federal
Software Licenses New/Renewals
Solicitation # N0016426Q0281
The contract solicitation N0016426Q0281 seeks software license renewals and new purchases from Ansys Incorporated under a sole-source arrangement, with the Government retaining full discretion on whether to conduct a competitive procurement despite allowing other responsible sources to submit capability statements. The procurement is associated with NAICS code 513210 and falls under the Department of Defense, specifically the Naval Surface Warfare Center Crane in Indiana, with the performance location also in Crane, Indiana. Offers must be submitted via email to Joshua Tester at joshua.e.tester.civ@us.navy.mil no later than August 8, 2026, at 12:00 AM Eastern Daylight Time. All vendors must be actively registered in the System for Award Management and comply with all registration and confirmation requirements. While the solicitation is issued under FAR Part 13 procedures with a synopsis exception, interested parties are responsible for monitoring sam.gov for any amendments prior to the deadline. Post-deadline changes will only be communicated to those who have submitted quotes and may influence future discussions or award decisions.
Software Publishers

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325211
New
Federal
Noryl Rods
Solicitation # N0016426Q0268
NSWC Crane is seeking quotes for 20 NORYL RODs, each 5 inches in diameter and black with 30% glass fill, to be cut into 4-foot sections totaling 80 feet. The contract will be awarded as a firm fixed price under Simplified Acquisition Procedures, with all quotes required to include shipping FOB to Crane, Indiana 47522, along with the delivery schedule. Payment will be made electronically via PIEE/WAWF within 30 days of invoice submission. Bidders must be currently registered in the System for Award Management and comply with all solicitation requirements, as non-compliant offers will be rejected without further review. This solicitation is a Small Business Set Aside under NAICS code 325211 and is issued under a synopsis exception. All amendments or updates prior to the closing date will be posted on SAM.gov, and it is the vendor’s responsibility to monitor for changes. Offers must be submitted via email to dustin.l.spicer.civ@us.navy.mil no later than 4:00 PM Eastern Time on August 14, 2026. Post-deadline amendments will only be shared with submitted offerors for potential future discussions or award.
Plastics Material and Resin Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
Federal
SOLE SOURCE – Thermistor Connectors
Solicitation # N0016426Q0266
The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting Thermistor Connectors through a sole-source contract action under FAR 13.106-1, limiting participation to Teledyne Instruments, Inc., as the only qualified source capable of meeting the technical requirements necessary for timely and accurate testing. The decision to proceed without competition is based on Teledyne’s exclusive qualification and existing capability to produce these critical components. While other responsible sources may submit capability statements, the Government retains full discretion to determine whether a competitive procurement is warranted, and such submissions will be evaluated solely for that purpose. Participation requires mandatory registration in the System for Award Management (SAM) and the Joint Certification Program (JCP) to access controlled technical attachments. The solicitation follows FAR Part 13 procedures and is exempt from full synopsis requirements under FAR 5.202(a)(13), with the official solicitation number N00164-26-Q-0266. Interested vendors must monitor sam.gov for any pre-closing amendments, and only those who submit quotes by the deadline will receive post-deadline revisions. Offers must be electronically submitted to Sandra Gunderman at sandra.e.gunderman.civ@us.navy.mil no later than August 3, 2026, at 1:00 PM Eastern Time. The contract is not set aside for small businesses or other categories, and performance will occur at Crane, Indiana.
Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
Federal
UPS System Upgrade
Solicitation # N0016426Q0279
The U.S. Navy’s Naval Surface Warfare Center Crane is seeking to upgrade and calibrate its uninterruptible power supply (UPS) system under contract number N0016426Q0279, with a closing date of August 8, 2026, at 12:00 AM Eastern Daylight Time. The procurement is being conducted as a non-competitive action with Eaton Corporation identified as the intended sole source, although other responsible vendors may submit capability statements for consideration; the government retains sole discretion on whether to proceed with competition. All participants must be registered in the System for Award Management and the contract is designated for small businesses. The requirement falls under NAICS code 334419 and is administered by the Department of Defense. Offers must be submitted via email to Joshua Tester at joshua.e.tester.civ@us.navy.mil, and any amendments to the solicitation will be posted exclusively on sam.gov, making it the vendor’s responsibility to monitor for updates. The place of performance is Crane, Indiana, and secondary point of contact is Shauna Pegg.
Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
Federal
INSULTING WASHERS
Solicitation # N0016426Q0275
The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting hydrophone backing plates under a sole-source procurement with limited competition, identified by solicitation number N00164-26-Q-0275 and NAICS code 335932. The procurement is authorized under FAR 13.106-1 and is restricted to previously tested and approved vendors—Brownstown Quality Tool & Automation, LLC, Wagler Competition Products, and Stark Precision Machine—who are the only entities eligible to submit offers. Although other responsible sources may submit capability statements, the Government retains full discretion to proceed without full competition based on its evaluation. The requirement is classified under FSG 5970 and involves specialized components critical to naval operations. Offerors must be actively registered in the System for Award Management (SAM) and the Joint Certification Program (JCP) to access controlled documentation and be considered for award. The solicitation was issued on July 31, 2026, with responses due by 4:00 PM Eastern Time on August 6, 2026. All submissions must be emailed directly to Cierra Vaughn at cierra.n.vaughn2.civ@us.navy.mil and include all required documentation. Potential vendors are responsible for regularly monitoring sam.gov for any amendments or updates prior to the deadline; changes issued after the closing date will only be shared with submitting offerors. This action falls under FAR Part 13 simplified acquisition procedures and is exempt from public synopsis under FAR 5.202(a)(13). The place of performance is Crane, Indiana, and the contracting office is within the Department of Defense. No set-aside status applies to this procurement.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
New
Federal
Unable to Retrieve Subcontract OpportunitiesNo subcontract opportunities could be identified or decomposed from the prime contract due to system errors, rendering the solicitation non-functional for potential subcontractors. The posting, issued by the Naval Surface Warfare Center Crane under the Department of Defense, was published on July 30, 2026, with a response deadline of August 3, 2026, but lacks essential details such as a solicitation number, NAICS code, set-aside information, organizational type, or point of contact. The place of performance is listed only as city code 17516 without state or zip code, and the office address contains no usable location data. The contract type is classified as subcontract, yet no viable opportunities or requirements are available for bid, making this entry effectively inactive or placeholder in nature.

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 541330
New
Federal
Engineering Change Proposal (ECP) SupportThe contract requires support for the development, documentation, and submission of Engineering Change Proposals to address design or process deviations from drawing 5974788 Revision L, with all changes subject to government approval. This effort is critical to ensuring compliance with technical specifications and maintaining regulatory adherence through formal change control processes. The work is classified as a subcontract under a Small Business Set Aside, specifically designated for total small business participation, with the NAICS code 541330 indicating engineering services. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, and the performance location is tied to a site identified as 17516. The contracting agency is the Naval Surface Warfare Center Crane Division under the Department of Defense, and the work is expected to involve close coordination with government representatives to secure necessary approvals for proposed changes. All submissions must align with established technical baselines and procedural requirements for engineering modifications within defense systems.
Engineering Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
Federal
Certificate of Compliance and Quality DocumentationThe contract requires the preparation and submission of Certificates of Compliance for each delivered unit under CDRL A003, ensuring strict adherence to all technical specifications and quality standards. This obligation is central to the deliverables and must be fulfilled for every unit provided under the subcontract. The activity is classified as a Small Business Set Aside under the SBA, with the NAICS code 541611 indicating it pertains to management consulting services, though the nature of the work is tied to quality assurance and compliance documentation for defense-related units. The contract was posted on July 30, 2026, with a deadline for responses on August 7, 2026, and is issued by the Naval Surface Warfare Center Crane under the Department of Defense. Performance is expected to occur at a location designated by the city code 17516, with no additional geographic details provided. The solicitation is part of a broader procurement effort to ensure rigorous quality control across delivered items.
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 541320
New
Federal
Test and Inspection Services for Seal AssembliesThe contract requires qualified vendors to perform qualification and acceptance testing on seal assemblies to ensure full compliance with drawing 5974788 Revision L. Testing must be conducted according to established procedures, and all results must be documented in Test Inspection Reports designated as CDRL A002, which serve as official verification of adherence to technical specifications. The work is classified as a subcontract under a Small Business Set Aside, with the NAICS code 541320 indicating engineering services, and is being procured by the Naval Surface Warfare Center Crane Division under the Department of Defense. Proposals must be submitted by August 7, 2026, with the work expected to be performed at a location identified by the ZIP code 17516, though no specific city or state is provided. The opportunity is open only to small businesses as defined by the SBA, and all responses must demonstrate technical competency and capacity to deliver accurate, compliant documentation meeting federal contracting standards.
Landscape Architectural Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
Federal
Technical Data Package (TDP) Development and SubmissionThe contract requires the development and delivery of a complete Technical Data Package compliant with Department of Defense standards, encompassing engineering drawings, detailed specifications, test procedures, and manufacturing documentation. This package, designated as CDRL A001, must meet all applicable DoD requirements for technical data and be submitted by the agreed-upon deadline. The effort is structured as a subcontract under a Small Business Set Aside, with the NAICS code 541330 indicating it falls under engineering services, and is intended exclusively for small business concerns. The solicitation was posted on July 30, 2026, with proposals due by August 7, 2026, and the work is to be performed at a location identified by the city code 17516. The contracting agency is the Naval Surface Warfare Center Crane, operating under the Department of Defense, with no specific point of contact provided. All deliverables must align with Defense standards, and the successful offeror will be responsible for ensuring the completeness, accuracy, and formal compliance of the TDP as stipulated in the contract requirements.
Engineering Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details