Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ORING

Active
SPE4AX-26-T-0110Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 37 preformed o-rings with part number 10-90354-11 and NSN 5331-01-016-7043, supplied by Bendix Corp Electrical Components Division in Sidney, NY. The item is classified as a commercial item and must comply with DLA packaging requirements, including removal of government identification from non-accepted supplies and physical identification marking of bare items. No asbestos as defined in Fed-Std-313 is permitted. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be assigned verification levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. Documentation for source approval is required under RC001, and all technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation issued under SPE4AX-26-T-0110 has a response deadline of August 13, 2026, with delivery required within 21 days of award to New Cumberland, PA, 17070-5002. The contracting office is the Department of Defense, SMSG Aviation Sup Ch Corporate LTC, with Andrew Alverson as the primary point of contact.

General Info

Procure 37 o-rings, part 10-90354-11, compliant with DLA packaging, zero defects, deliver to New Cumberland, PA by award.

Agency

Department Of Defense → SMSG AVIATION SUP CH CORPORATE LTCView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4AX-26-T-0110 for DLA Aviation Supplies

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SMSG AVIATION SUP CH CORPORATE LTC
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → SMSG AVIATION SUP CH CORPORATE LTC
View Agency Profile
Office AddressUS
Contacts
Andrew Alverson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ORING
PACKING, PREFORMED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
BENDIX CORP ELECTRICAL COMPONENTS DIV (77820)
SIDNEY NY
P/N 10-90354-11
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
ADEQUATE DATA FOR NSN/Part Number: 5331-01-016-7043 Quantity: 37 EA Purchase Request: 7017708620QTY: 37 Delivery: 21 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
Federal
53--GASKET
Solicitation # SPE7M426T313T
The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for NSN 5330015124594, a gasket, under solicitation number SPE7M426T313T, which is a Small Business Set Aside for total procurement. A total of 36 units are required, each to be delivered to W1A8 DLA DISTRIBUTION within 244 days after award. The approved source for this item is BLUE GYLON 3565, and quotes must be submitted electronically via the SAM.gov portal; hard copies are not accepted. The solicitation, posted on August 6, 2026, has a response deadline of August 17, 2026, and is open to all responsible sources capable of meeting requirements. No specifications, plans, or drawings are available, and inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link or DIBBS website using the solicitation number. The NAICS code is 339991, and the procuring office is located in Columbus, Ohio.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
Federal
Puller and Pusher Lip Seal Tooling
Solicitation # N5523626Q0107
This solicitation, numbered N5523626Q0107, is a sole-source combined synopsis and solicitation issued under FAR Part 12 for commercial supplies, specifically targeting Boeing Distribution Inc. for the procurement of Puller and Pusher Lip Seal Tooling required for intermediate-level repairs on Rolls-Royce T56 Model 250 engines aboard U.S. Naval ships. The requirement is justified under FAR 6.103-1 and 12.102 due to the unique and specialized nature of the tooling, which is essential for maintaining gas turbine-configured engines at the Southwest Regional Maintenance Center in San Diego, California. The North American Industry Classification System code is 339991, and the delivery must be completed by November 19, 2026, to support critical maintenance schedules. Although the solicitation is open to expressions of interest from other vendors, the government has determined not to compete the requirement and will proceed with Boeing as the exclusive contractor. The solicitation incorporates all applicable clauses and provisions under Federal Acquisition Circular 2026-01, effective July 2, 2026, and DFARS Publication Notice 20260702. Responses must be submitted by August 14, 2026, and are to be directed to the primary point of contact, Silvana Miranda, with secondary support from Ricardo Barraza-Cobos. The place of performance is in San Diego, California, and no set-aside is applicable. Detailed product specifications and requirements are referenced in the attached Product Description and COMSIS document. All communications and submissions must adhere to the terms governed by the Federal Acquisition Regulation as currently amended, and the solicitation constitutes the complete and exclusive basis for any contract award.
Southwest Regional Maintenance Center

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
Federal
53--PACKING WITH RETAINER
Solicitation # SPE7M426T317E
The contract involves the procurement of 5,193 units of NSN 5330005796857 PACKING WITH RETAINER, to be delivered to the DLA Distribution Depot in Oklahoma with a delivery deadline of 171 days after award. This is a source-controlled item, and only approved suppliers—77969 2230-3, 77969 50129-1, and 83259 50129-1—are eligible to quote. The solicitation, identified as SPE7M426T317E, is issued as a Request for Quote under a Small Business Set Aside for total award, with a NAICS code of 339991, and is managed by the DLA Land and Maritime office in Columbus, Ohio. All quotes must be submitted electronically via the provided SAM.gov link, with no hard copies available; items must strictly comply with the drawing specifications referenced in the solicitation, and digital access to military drawings and standards is available electronically. The response deadline is August 17, 2026, and all responsible sources may submit a quote if received on time. Questions must be directed to the designated point of contact via email.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
Federal
53--SEAL,AIRFRAME,SPECI
Solicitation # SPE7L326T154W
The contract seeks the procurement of 9 units of NSN 5330014637359, a specialized airframe seal, to be delivered to the DLA Distribution Depot in Oklahoma within 168 days after award. This is a Small Business Set Aside solicitation under NAICS code 339991, open only to responsible small business sources, and all quotes must be submitted electronically through the specified SAM.gov portal. The solicitation, identified as SPE7L326T154W, was posted on August 6, 2026, with a response deadline of August 17, 2026, and no hard copies are available. Technical documentation including digitized drawings and military specifications can be accessed or ordered electronically via the provided link. The solicitation is managed by the DLA Land and Maritime office in Columbus, Ohio, with direct questions to be sent to the designated point of contact email listed in the official document.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
Federal
53--PACKING ASSEMBLY
Solicitation # SPE7L426U1063
The solicitation seeks quotes for 1,496 packing assemblies under NSN 5330006302442, with delivery required within 97 days of order placement, and performance spanning CONUS and OCONUS locations through consolidated shipping points to DLA depots. This is a Small Business Set Aside for total awards under NAICS code 339991, managed by the Department of Defense’s DLA Land and Maritime office in Columbus, Ohio. The procurement may result in an Indefinite Delivery Contract with a one-year term or until $350,000 in aggregate orders is reached, with an estimated 12 orders per year and a guaranteed minimum of 224 units. Only approved sources—PBMF000474T09NR and 721A6MS987P4—are eligible to respond, and all submissions must be made electronically through the SAM.gov portal by the August 21, 2026 deadline. No hard copies or technical specifications are available, and inquiries must be directed to the designated buyer email provided in the solicitation document.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
Federal
53--GASKET
Solicitation # SPE7L326T150W
The U.S. Department of Defense, through DLA Land and Maritime, is seeking quotes for 217 units of NSN 5330001712865, a gasket, under a Small Business Set Aside contract with the NAICS code 339991. The solicitation, numbered SPE7L326T150W, is posted as a combined RFQ with a response deadline of August 17, 2026, and must be submitted electronically; hard copies are not available, and no specifications, plans, or drawings are provided. Approved sources for this item include vendors with CAGE codes 77969, 83259, and 91041, with specific part numbers listed. Deliveries are to be made to DLA Distribution Albany within 216 days of award. The procurement is restricted to small business concerns, and all responsible small business suppliers may submit a quote if received on time. Point of contact for inquiries is via email, with additional guidance directing potential offerors to the DIBBS website using the solicitation number for full documentation access. The contracting office is located in Columbus, Ohio.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
Federal
53--RETAINER,SEAL
Solicitation # SPE7M426T313Z
The contract seeks the procurement of 16 units of NSN 5330015339288 RETAINER, SEAL under a Small Business Set Aside totaling, with all quotes required to be submitted electronically through the solicitation platform. The solicitation, numbered SPE7M4826T313Z, was posted on August 6, 2026, with a firm response deadline of August 17, 2026, and the delivery must be made to the DLA Distribution Depot in Oklahoma within 168 calendar days after award. Only responsible sources may respond, and no hard copies of the solicitation are available; interested parties must access documents and military specifications online via the provided digital portal. The procurement falls under NAICS code 339991, and the issuing office is the DLA Land and Maritime under the Department of Defense, located in Columbus, Ohio. All inquiries must be directed to the designated point of contact via email, with additional instructions for accessing the full solicitation document available through the SAM.gov workspace link.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
Federal
53--GASKET
Solicitation # SPE7M426T318F
The contract seeks the procurement of 164 units of NSN 5330010584590 GASKET, with delivery required to W1A8 DLA DISTRIBUTION within 422 days after award. The approved source for this item is 99447 9044-3, and only electronic quotes will be accepted; hard copies are not available. The solicitation, identified as SPE7M4826T318F, is posted online and accessible via the provided SAM.gov link, with no supporting specifications, plans, or drawings available to offer further technical detail. All responsible suppliers are eligible to submit quotes, and submissions must be received electronically prior to the deadline of August 17, 2026. The opportunity is classified as a combined solicitation under NAICS code 339991, managed by the DLA Land and Maritime office based in Columbus, Ohio. Direct questions must be sent to the designated buyer via email, as no other contact methods are provided and no additional documentation beyond the solicitation posting is available for reference.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
Federal
RETAINER SLEEVE,SEA
Solicitation # N0010426QND29
This contract pertains to the supply of a Seat Retainer for a size 4 inch Hull and Backup Valve, designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), requiring strict adherence to Navy drawing 256348 and applicable military and industry standards including QQ-N-281, MIL-STD-792, ISO-9001, and S9074 series welding and brazing specifications. The material must be traceable from raw stock through every manufacturing step to final delivery, with unique heat-lot marking, full chemical and mechanical certification, and 100% inspection of all test reports and physical markings. Electronic submission of certifications via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard is mandatory prior to shipment, with strict rejection criteria for any missing, inaccurate, or unqualified documentation. All welding and brazing procedures and personnel must be pre-approved, and contractor quality systems must comply with ISO-9001 and ISO-10012 or be alternatively certified under MIL-I-45208 and MIL-STD-45662. Government quality assurance is conducted at source, and subcontractor controls are explicitly required to maintain the same traceability, sampling, and certification standards as the prime contractor. Any deviation, waiver, or engineering change affecting form, fit, function, or safety requires formal approval from the Contracting Officer and must be documented with complete impact analysis. The contract mandates zero defect acceptance for all final inspections, with sample sizes governed by ANSI/ASQ Z1.4 or military standards, and prohibits any use of mercury or mercury-containing compounds. Certifications must be signed with validated electronic signatures that are unique, auditable, and non-repudiable, with no disclaimers permitted. All documentation, including test reports, weld qualifications, and configuration data, must be submitted electronically via the ECDS system and retained in compliance with naval requirements. The item is subject to defense priority rating under DPAS, is part of a total small business set-aside, and falls under emergency acquisition flexibilities, requiring bilateral acceptance before execution. Packaging and preservation must adhere to MIL-STD-2073, and all delivered items must include complete, legible, and accurate certification records matching traceability marks on the physical components. The contract further prohibits marking of material with designators except for fasteners, requires strict separation of traceable materials to prevent commingling, and obligates the contractor to audit
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 339991
New
Federal
53--SEAL RING,METAL
Solicitation # SPE7L326T165R
The contract seeks procurement of 8 metal seal rings with NSN 5330012749863, to be delivered to DLA Dist San Joaquin with a delivery deadline of 91 days after award. Only approved sources identified by part numbers 75333 43 1/2-9118-54 and 75333 469118 PIECE 54 are eligible for submission. The solicitation is issued as an RFQ under number SPE7L336T165R, which is available exclusively online via the provided SAM.gov link; hard copies are not offered and no specifications, plans, or drawings are available to potential offerors. All responsible sources may submit quotes electronically, provided they are received before the response deadline of August 17, 2026. The activity is managed by the DLA Land and Maritime office in Columbus, Ohio, with inquiries directed to the buyer contact via email. The procurement falls under NAICS code 339991 for other miscellaneous manufacturing and is not set aside for any specific small business category.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
Federal
59--SHIELDING GASKET,EL
Solicitation # SPE7M126U5079
The solicitation seeks a shielding gasket, NSN 5999012551857, with a requested quantity of 54 units under an RFQ that may lead to an indefinite delivery contract lasting one year or until aggregate orders reach $350,000, with a guaranteed minimum of eight units annually. Deliveries will be distributed to multiple CONUS and OCONUS DLA depots via consolidated and containerized shipments, and the item is source-controlled, requiring procurement exclusively from the approved source identified as 27565 DA9723. All products must strictly conform to the drawing specifications referenced in the solicitation, with digitized drawings and military standards accessible electronically. Quotes must be submitted electronically by the deadline of August 21, 2026, and are open to all responsible sources without set-aside restrictions. The solicitation is managed by the DLA Land and Maritime office in Columbus, Ohio, and inquiries should be directed to the designated point of contact via email. No hard copies are available, and all documentation must be accessed through the official SAM.gov portal using the provided solicitation number.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
Federal
53--GASKET
Solicitation # SPE7M426T311Z
The solicitation seeks quotes for 75 units of NSN 5330013884964 GASKET, a qualified products list item, to be delivered to W1A8 DLA DISTRIBUTION within 87 days of award. This is a full and open competition with no set aside, open to all responsible sources that submit timely electronic quotes. The procurement is conducted under RFQ SPE7M426T311Z, posted on August 6, 2026, with responses due by August 17, 2026. The solicitation is exclusively available online via the provided SAM.gov link; no hard copies are distributed. Technical specifications referenced are accessible electronically through official military standards channels. The contract falls under NAICS code 339991 and is managed by the DLA Land and Maritime office in Columbus, Ohio. All inquiries must be directed via email to the designated point of contact, with further details obtainable through the DIBBS solicitation portal using the provided solicitation number.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → SMSG AVIATION SUP CH CORPORATE LTC

Same awarding agency

NAICS: 541511
New
DIBBS
Cybersecurity Compliance for Controlled Unclassified Information (CUI)
Custom Computer Programming Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Electronic Invoicing and WAWF Compliance Support
Computer Systems Design Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and Safety Data Compliance
Other Scientific and Technical Consulting Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Preservation Services
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
Precision Rubber Sealing Component Manufacturing
All Other Rubber Product Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
DIBBS
MISCELLANEOUS
Solicitation # SPE4AX-26-R-0002
The U.S. Government, through the Defense Logistics Agency Aviation, is seeking to award a Firm Fixed Price contract on a sole source basis to 3M (CAGE Code 76381) under the authority of FAR 6.302-1, as the company is the only known manufacturer and supplier of 17 specific National Stock Numbers (NSNs) that are critical to military operations. This action is a follow-on to two existing long-term contracts, SPE4AX-17-D-9407 and SPE4A6-18-D-0013, and will utilize simplified acquisition procedures under FAR 13. The solicitation, numbered SPE4AX26R0002, was posted on May 11, 2026, with responses due by June 2, 2026, and the contracting office is located in Richmond, Virginia. All potential respondents must be registered in SAM.gov, possess a valid CAGE Code, DUNS number, and Tax Identification Number, and any non-OEM interested parties are encouraged to submit a letter of interest that includes evidence of their ability to supply the items, quantities available, pricing, and compliance details to both the acquisition specialist and the SBA Procurement Center Representative. The Government will assess all responses to determine if competition could lead to better value, but the intent remains to award to 3M unless compelling evidence emerges to justify an alternative. The contract is expected to cover a three-year base period with a two-year option, and the place of performance is Richmond, VA, although FOB terms, delivery schedules, and inspection criteria are not specified in the notice. The procurement does not include detailed evaluation factors, pricing data, or special contract requirements, as it is primarily a market research action to validate sole source justification and explore potential small business participation among HUBZone, 8(a), SDVOSB, and WOSB entities.

POSTED

5 months ago

DEADLINE

in 24 days
View Details