Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

OSCILLATOR, CRYSTAL CON

Active
SPE7M1-26-T-343NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M1-26-T-343N is a Request for Quotations issued by DLA Land and Maritime for the procurement of three crystal controlled oscillators, identified by NSN 5955015666631 and Stanford Research Systems Inc. part number PRS 10. The procurement is governed by NAICS code 334419 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. The required delivery date is June 3, 2027, with a need ship date of March 9, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including a specific fragile marking code. Palletization must comply with DLA packaging requirement RP001. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by September 21, 2026. The award process may be automated, and the government will not consider items produced using additive manufacturing. Compliance with the Buy American Act, DFARS safeguarding of covered defense information, and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing are required.

General Info

DLA seeks three crystal controlled oscillators by June 2027 via DIBBS by September 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-343N Request for Quotations

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUSA

Full Description

Show more
OSCILLATOR,CRYSTAL CONTROLLED
OSCILLATOR,CRYSTAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
STANFORD RESEARCH SYSTEMS INC. 67276 P/N PRS 10
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018270020 0001 EA 3.000
NSN/MATERIAL:5955015666631
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:00 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:01 -01 Fragile
SPE7M1-26-T-343N
SECTION B
PR: 7018270020 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:03/09/2027 Original Required Delivery Date:06/03/2027
SPE7M1-26-T-343N NSN/Part Number: 5955-01-566-6631 Quantity: 3 EA Purchase Request: 7018270020QTY: 3 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
SHOE, JACK-SUPPORT
Solicitation # SPE7LX-26-T-1117
Solicitation SPE7LX-26-T-1117 is a Request for Quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of 97 units of Jack-Support Shoes (NSN 4940-01-678-9226). This is a total small business set-aside under NAICS 334419, with a specific preference for JLTVCI Small Business Prime Contract holders. The procurement requires adherence to multiple technical drawings and quality standards, including the DLA Master List of Technical and Quality Requirements. Delivery is specified as FOB Origin with a delivery period of 168 days, and the items are to be shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following RP001 requirements. Inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Award decisions will be based on fair and reasonable pricing, quality, and delivery terms, with the potential to convert to a FAR Part 13 Simplified Acquisition if initial pricing is not found to be fair and reasonable.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334419
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M5-26-T-455B
Solicitation SPE7M5-26-T-455B, issued by DLA Land and Maritime Active Devices Division, is a request for quotations for four linear microcircuits, identified by NSN 5962012477674 and part number HI1-5047A/883 from Renesas Electronics America Inc. The procurement is for a critical application item and is categorized as a commercial item. Delivery is required within 143 days, with a need ship date of February 2, 2027, and a final required delivery date of July 1, 2027. Inspection and acceptance will occur at the destination, specifically DLA Distribution DDWO in Columbus, Ohio. The contract imposes stringent quality and technical requirements, including CMMC Level 2 self-assessment and strict supply chain traceability. Contractors must provide DLA Land and Maritime Form 918 and associated traceability or test reports at least 15 days prior to the delivery date to receive shipping authorization. Packaging must adhere to MIL-STD-2073-1E and MIL-PRF-81705 for ESD and EMI protection, with specific cushioning requirements per A-A-59136 to prevent lead damage. Marking must comply with MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Additionally, the contractor must ensure that mercury is not intentionally added to the hardware and must comply with the Buy American and Balance of Payments Program. All quotes must be submitted via the DIBBS portal by September 11, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M1-26-U-5585
Solicitation SPE7M1-26-U-5585, issued by DLA Land and Maritime, is for the procurement of electrical plug connectors under NSN 5935011078814. The requirement is for an estimated quantity of 147 units, with a contract maximum value of 350,000.00 dollars. This is an Indefinite Delivery Contract for a one year period, utilizing a simplified acquisition process. Delivery is required within 94 days after receipt of order, with shipping terms based on FOB Origin under the First Destination Transportation program. Inspection and acceptance will occur at the destination. The items are classified as critical application items and must comply with basic specification MS27467M(1) and reference specification MIL-DTL-38999N(1). This is a qualified item subject to the Qualified Products List for Federal Stock Class 5935. Specific quality restrictions prohibit the use of materials manufactured by Bendix Corporation (CAGE 77820) with lot date codes from January 1977 through February 1984. Additionally, the use of Class I ozone-depleting substances is prohibited without written approval. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129. Removable crimp type contacts must not be installed in the connector insert but must be placed in a close fitting noncorrosive rigid container within the unit container, labeled with current and superseded part numbers per SAE-AS39029. Hazardous materials must be labeled according to the Hazard Communication Standard. Payment and invoicing will be processed electronically through the Wide Area Workflow system.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333998
New
DIBBS
PARTS KIT, FLUID PRESSU
Solicitation # SPE7M1-26-U-5566
Solicitation SPE7M1-26-U-5566 is a total small business set-aside for an indefinite delivery contract with a one year period, issued by the Defense Logistics Agency for the procurement of fluid pressure filter parts kits. The requirement specifies General Motors LLC 7X677 part number 24210956, with an estimated annual quantity of 3,515 units and a guaranteed contract minimum of 527 units. The contract has a maximum value of 350,000 dollars and requires a delivery period of 81 days. The government reserves the right to make multiple awards, with the best value offeror receiving at least 60 percent of the total requirement. Technical compliance requires adherence to DLA master lists and specific packaging standards, including MIL-STD-2073-1 Appendix D for kits and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Offerors must submit quotes via DIBBS and are prohibited from using additive manufacturing processes unless authorized. The contract incorporates various FAR and DFARS clauses, including requirements for combating trafficking in persons, safeguarding covered defense information, and compliance with the Buy American Act. Payment and invoicing must be processed through the Wide Area WorkFlow system.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS