Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Overhaul of the UH-60 POWER TURBINE MODULE

Open
W58RGZ-26-B-0012_0004Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation W58RGZ-26-B-0012, issued by Army Contracting Command-Redstone, is for the maintenance and overhaul of the Power Turbine Module for the Black Hawk weapons system. Amendment 0004 formally converts this from a noncommercial to a commercial requirement under FAR Part 12 and restructures the contract from a five-year to a three-year Indefinite Delivery Indefinite Quantity (IDIQ) firm-fixed-price agreement. The scope includes the overhaul and upgrade of modules for both US and Foreign Military Sales, as well as the provision of contractor-furnished containers. The contract is divided into three annual ordering periods, with award based on the lowest total cost. Because the Power Turbine Module is designated as a Critical Safety Item, all work must be performed by a source approved by the Combat Capabilities Development Command Aviation and Missile Center Systems Readiness Directorate in accordance with DFARS Subpart 209.2. Contractors must adhere to strict airworthiness standards per Army Regulation 70-62 and AMCOM regulation 702-7. Additional requirements include compliance with MIL-STD-2073-I8 for packaging and MIL-STD-129R for marking. Access to technical data is restricted to entities with an approved DD2345 agreement, JCP certification, and verified CMMC status in the Supplier Performance Risk System. Bids must be submitted electronically by November 30, 2026.

General Info

Three-year IDIQ firm-fixed-price contract for Black Hawk Power Turbine Module maintenance and overhaul.

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

Redstone Arsenal, AL, 35898, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstamendment
High

Read the document

Due in 15 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 15 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Rsa
Contacts2 people available
OfficeREDSTONE ARSENAL, AL, 35898-0000, USA

Full Description

Show more

The purpose of this Amendment 0004 to solicitation W58RGZ-26-B-0012 is to formally update the acquisition approach and restructure the requirement. The Defense Contract Management Agency (DCMA) Commercial Item Group (CIG) has issued a formal determination concluding that the maintenance and overhaul (M&O) services for the Power Turbine Module of the Black Hawk weapons system described in this solicitation meet the definition of a commercial product/commercial service in accordance with FAR 2.101. Consequently, this solicitation is hereby converted from a noncommercial requirement to a commercial requirement conducted under FAR Part 12.


Additionally, this amendment restructures the contract type from a five-year Indefinite Delivery Indefinite Quantity (IDIQ) to a three-year IDIQ and incorporates mandatory regulatory updates in compliance with the recent Revolutionary FAR Overhaul (RFO).

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
MANIFOLD, ENGINE AIR
Solicitation # SPE4A7-27-R-0104
Solicitation SPE4A7-27-R-0104 is a small business set-aside for a fixed-price Indefinite Quantity Contract to provide Engine Air Manifolds (NSN 1560-00-780-2339) for the DLA Weapons Support ASC. The contract features a five-year base period with an estimated annual demand of 20 units, a guaranteed minimum of 5 units, and delivery orders ranging from 5 to 20 units. Award will be based on a best-value determination, with price, past performance (heavily weighted by SPRS assessments), and delivery given equal importance. The solicitation was issued on November 16, 2026, with a response deadline of December 17, 2026. This is designated as a critical application item requiring strict adherence to technical specifications and quality standards, including untailored versions of AS9100 and ISO 9001:2015. Key requirements include a Government First Article Testing (FAT) process with a total delivery timeline of 416 days, CMMC Level 2 cybersecurity certification, and compliance with ITAR/EAR export controls. Deliveries are for stock shipments within the Continental United States, with inspection and acceptance occurring at the source. Contractors must utilize the Wide Area WorkFlow system for invoicing and adhere to MIL-STD-129 and MIL-STD-130 for packaging and unique item identification for items valued at 5,000 dollars or more.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
SHIELD,HEAT,AIRCRAF
Solicitation # SPRTA127Q0004
Solicitation SPRTA127Q0004 is issued by the Department of Defense, specifically the DLA Aviation office at Tinker AFB, Oklahoma, for the procurement of aircraft heat shields. The primary item is identified by NSN 2840-01-017-1900 NZ and manufacturer part number 4045970, requiring the use of AMS 5510 heat resistant steel. Due to its application in F-100 series turbine engines, the item is designated as a Critical Safety Item, necessitating a First Article Test Plan in accordance with DD Form 1423. The government is seeking a current quantity of four units, though contractors must provide pricing for a range between two and nine units. Delivery is required by December 31, 2028, to designated locations at Tinker AFB. The award will be determined using the Best Value Process, Performance Price Tradeoff, where technical capability is a prerequisite, and price and past performance are weighted approximately equally. The solicitation is not a small business set-aside and falls under NAICS code 336412. Key compliance requirements include IUID and serial number marking per MIL-STD-130 and MIL-STD-129, as well as adherence to the Buy American Act and DFARS cybersecurity reporting standards. Invoicing and receiving reports must be processed through the Wide Area Workflow system. Quotes are to be submitted via email to the primary point of contact, Aric Harmon, by the specified deadline.
Ok DLA Aviation At Oklahoma City

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336412
New
DIBBS
28--SUPPORT,RIGHT IGNIT
Solicitation # SPE4A7-27-T-4314
Solicitation SPE4A7-27-T-4314 is a fixed-price procurement issued by the DLA Weapons Support ASC Supplier Operae and AF Div for 11 units of a Right Ignition Support (NSN 2840-00-799-8052). This item is designated as an Air Force Critical Safety Item and a Critical Application Item, requiring strict adherence to quality standards. The manufacturer's quality management system must comply with SAE AS9100, and sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with a requirement for zero non-conformances in the sample lot. Delivery is set for 499 days ADO, with a required delivery date of October 1, 2028, shipped FOB Origin to the DLA Distribution Depot Oklahoma. The solicitation is a total small business set-aside. Offerors must comply with the Buy American Act and the Berry Amendment, disclosing any non-domestic materials used. The contract prohibits the use of additive manufacturing processes unless specifically authorized and forbids the provision of covered telecommunications equipment or services. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. Invoicing must be processed electronically via the Wide Area WorkFlow system. Quotations are due by November 24, 2026, and should be submitted through DIBBS, with a recommendation to provide quantity ranges to accommodate volatility in demand.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → W6QK Acc-Rsa

Same awarding agency

NAICS: 236220
New
Federal
Multi-Site Indirect Fire (IDF) Concrete Bunker Construction & Installation
Solicitation # ASGOCS-JXXF1113
The Department of Defense, via the United States Army Central and Area Support Group Jordan, is seeking a contractor to deliver, assemble, backfill, and commission seventeen standardized precast reinforced concrete Indirect Fire (IDF) bunkers across five distinct sites. The project is distributed across three countries: ten bunkers in the State of Israel, five in the Kingdom of Saudi Arabia, and two in the Republic of Lebanon. The anticipated contract is a Firm-Fixed-Price or agreement that requires the contractor to provide all engineering, licensed technical oversight, labor, materials, and heavy equipment, including the connection of facilities to base electrical, water, and sewer systems. The period of performance is strictly 45 calendar days per country/site task order, with the first 15 days dedicated to site surveys, security vetting, and design submittals (60%, 90%, and 100%), followed by 30 days for construction and final inspection. All work must comply with the International Building Code and specific USG quality standards, ensuring facilities remain durable with minimal maintenance for 10 years. Contractors must adhere to rigorous security protocols, including NCIC-III and TSDB background checks, and follow strict environmental guidelines prohibiting materials such as asbestos and lead. Interested firms must submit an 8-page capabilities package by November 25, 2026, detailing their technical sourcing, past performance in CENTCOM locations, and mobilization feasibility.
Commercial and Institutional Building Construction

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
Federal
SCREW ASSEMBLY PANEL
Solicitation # W58RGZ-26-Q-0008
The U.S. Government is seeking sources for the procurement of Screw Assembly Panels for the AH-64 Apache helicopter platform, identified by NSN 5305-01-620-5044 and Part Number HS6116HS0080. This acquisition is intended to be a five-year Firm Fixed Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contract with five priced ordering periods. The estimated quantity ranges from a minimum of 118 to a maximum of 590 units, though specific ordering periods show requirements up to 1,298 units. The contractor must provide all necessary labor, materials, and equipment to fulfill the order, with delivery commencing 30 days after award at a rate of 10 units per month. The procurement is managed by the Army Contracting Command-Redstone and is not a small business set-aside. All items must meet commercial level preservation and packing standards in accordance with ASTM-D3951 and MIL-STD-129, and all wood packaging materials must be ISPM-15 compliant. Inspection and acceptance will occur at the origin, with the final delivery location at the DLA Distribution San Joaquin in Tracy, California. Payments will be processed electronically through the Wide Area WorkFlow (WAWF) system. This notice serves as a sources sought effort to research business capabilities and does not constitute a formal contract award.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

6 days ago

DEADLINE

in about 1 year
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS