Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

OXIMETER, PULSE

Active
SPE2DS-26-T-232CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of six Masimo MightySat RX pulse oximeters, devices designed to measure pulse rate, blood oxygen saturation (SpO2), and perfusion index (PI), with specialized functionality for use in challenging environments involving patient movement due to shivering or cold-induced bodily motion. Each unit requires two standard AAA alkaline batteries, operates within a temperature range of 41 to 104 degrees Fahrenheit, and can be stored between -40 and 158 degrees Fahrenheit. The device is compact, weighing 0.16 pounds and measuring 2.9 x 1.6 x 1.2 inches, with a battery life supporting approximately 1800 spot checks. All units must be packaged in sealed, protective containers designed to prevent damage and comply with commercial packaging standards as outlined in the procurement document, with exterior shipping containers suitable for safe delivery via common carrier at the lowest cost to the designated delivery point, which is FPO, ZIP 96691-3300. All items must be marked in accordance with the Medical Marking Standard No. 1, replacing previous MIL-STD-129 requirements, with documentation available through DLA Troop Support. The acquisition falls under NSN 6515-01-655-9412 and is subject to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. The contract includes provisions for the removal of government identification from non-accepted supplies and incorporates DLA packaging requirements, with delivery expected within 20 days after order placement. The solicitation number is SPE2DS-26-T-232C, issued under NAICS code 339112 by the Department of Defense’s Medical Supply Chain, with responses due by July 20, 2026.

General Info

Procure six Masimo MightySat RX oximeters with cold-environment functionality, compliant packaging, delivered to FPO ZIP 96691-3300 within 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

UNIT 100133 BOX 1, FPO, AP, 96691-3300, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-232C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
OXIMETER,PULSE
OXIMETER, PULSE
MASIMO MIGHTYSAT RX PULSE OXIMETER THAT
MEASURES PULSE RATE, SPO2/OXYGEN SATURATION
AND PI/PERFUSION INDEX, SPECIFICALLY DESIGNED
FOR USE IN PATIENT MOVEMENT ENVIRONMENTS WHERE
PATIENTS ARE EFFECTED BY BODILY MOVENTS CAUSED
BY SHIVERING/COLD AND TRANSPORT; REQUIRES 2 AAA
STANDARD ALKALINE BATTERIES; OPERATING TEMPERATURE<(>,<)>
41 5O 104 DEGREES F; STORAGE TEMPERATURE, -40 TO 158 DEGREES F;
WEIGHT, 0.16 POUNDS; DIMENSIONS, 2.9 X 1.6 X 1.2 INCHES; BATTERY LIFE
<(>,<)>
APPROXIMATELY 1800 SPOT CHECKS
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
UNIT OF ISSUE: EACH (EA)
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
SPE2DS-26-T-232C
SECTION B
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-655-9412 Quantity: 6 EA Purchase Request: 7017473484QTY: 6 Delivery: 20 days ADO

Similar Contracts

NAICS: 339112
New
DIBBS
AIRWAY, SUPRAGLOTTICThe contract specifies the procurement of six disposable supraglottic airway devices, size 3 with a yellow tip, designated as KING LTS-D, designed to facilitate alternative airway management by allowing passage of a gastric tube through a dedicated channel and featuring a straightened, beveled distal tip to aid placement posterior to the larynx and into the upper esophagus. Each unit must meet strict packaging and labeling requirements per Medical Marking Standard No. 1, replacing MIL-STD-129, with all labels including the manufacturer date, expiration or retest date, contract number, and lot number. The product must have a shelf life of 48 months, with no more than seven months elapsed between the manufacturer date and delivery to the government, and packaging must ensure protection from damage and comply with commercial shipping standards suitable for safe transport at the lowest cost to the delivery point at Fort Stewart, Georgia. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced under RA001, with applicable revisions controlled by the solicitation issue date or award date depending on acquisition scale. The contract mandates that bidders clearly identify the source and part number supplied, aligning with the NSN 6515-01-716-4819, and removal of government identification from non-accepted supplies is governed by RQ011. Packaging must adhere to DLA standards outlined in RP001 for procurement under contract SPE2DS-26-T-229J, with responses due by July 20, 2026, and delivery required within 20 days of award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, DRAINAGE, SURGICALThe contract specifies the procurement of sterile surgical drainage tubes measuring 7/8 inch by 12 inches in length, with a thickness of 0.011 inches and composed of radiopaque amber rubber or latex, delivered in individual peel-back containers with a unit package quantity of 200 per package. The product must have a shelf life of 60 months, and no more than nine months may have elapsed from the manufacturer’s date to the date of delivery to the government. All packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and labels must include the manufacturer’s date, expiration or retest date, contract number, and lot number in accordance with the latest revision of MMS1A. The tubes must be packaged in sealed unit containers to prevent damage and shipped in commercial exterior containers suitable for safe transport at the lowest freight rate to the specified delivery point, with export packaging required when necessary. The NSN is 6515-01-385-1697, with a total quantity of two packages requested, and delivery is required within 20 days of award. The solicitation number is SPE2DS-26-T-231X, issued on July 14, 2026, with a response deadline of July 20, 2026, under the NAICS code 339112 for medical device manufacturing. Bidders must identify the source and part number being supplied, and the contract incorporates technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements. The point of contact for inquiries is Aidan Martz, and the place of performance is FPO, with the contracting agency under the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details