Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Packaging and Marking Services for DLA Aerospace Components

Open

Federal

Response Deadline11/16/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized packaging, marking, and labeling services for 43 units of Lubrication Clamp A to support the DLA Weapons Support Fluid Handling Division. The contractor is required to perform these services in strict accordance with ASTM D3951, DLA RP001, and MIL-STD-129, while adhering to the DLA Master List of Technical and Quality Requirements. The final deliverables must be packaged and labeled for FOB Origin shipment. The project is designated as a Total Small Business Set-Aside under NAICS code 488510 and is managed by the Department of Defense. Performance of the contract will take place in San Diego, California. Interested parties must respond by November 16, 2026.

General Info

Packaging and labeling 43 Lubrication Clamps for DLA in San Diego by November 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

488510 - Freight Transportation Arrangement

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M4-27-T-2790.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLAMP, LUBRICATION, A

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 09:00:00 AM PSTin 9 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging, marking, and labeling for prime contractors on DLA Weapons Support Fluid Handling Division projects. Packages 43 units of Lubrication Clamp A per ASTM D3951 and DLA RP001. Applies markings and labels in compliance with MIL-STD-129. Utilizes DLA Master List of Technical and Quality Requirements. Delivers 43 units packaged and labeled for FOB Origin shipment.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging, preservation, and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work requires the packaging of three units in strict accordance with MIL-STD-2073-1E using preservation material 49 and wrap material GB, with labeling performed per MIL-STD-129. The project is designated as a FOB Origin shipment destined for DLA Distribution DDSP New Cumberland. Interested parties should note the response deadline of November 16, 2026, and the associated NAICS code 488510 for these specialized logistics and packaging services.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract opportunity is for the provision of military-grade packaging and labeling services to support prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will be responsible for supplying all necessary packaging materials and performing final packing and marking for 31 ball joints. All work must be executed in strict accordance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with delivery handled on an FOB Origin basis. The project is designated as a Total Small Business Set-Aside under NAICS code 488510 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must possess specialized expertise in DLA packaging and marking standards to ensure compliance with all military specifications.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

First Destination Transportation (FDT) Freight ServicesThe First Destination Transportation Freight Services subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the transportation of fluid handling hardware for prime contractors. The selected provider is responsible for coordinating pickups from suppliers on an FOB Origin basis and managing the entire transit process to the final government destination. Key operational requirements include the mandatory use of U.S.-flag vessels for all ocean transport and the provision of comprehensive freight documentation, specifically detailing the gross weight and port of loading. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 488510.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of non-hazardous materials according to ASTM D3951 and the marking of all packaging in compliance with MIL-STD-129. Additionally, the provider must execute palletization following RP001 DLA Packaging Requirements and ensure all hazardous materials meet TQ Requirement IP025. The final deliverables must be shipment ready for FOB Origin transport to the DDSP in New Cumberland. This effort falls under NAICS code 488510 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The response deadline for this opportunity is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Aircraft ComponentsThis subcontract involves providing specialized MIL-SPEC packaging and marking services for aircraft structural components supporting DLA Aviation supply contracts. The scope of work requires strict adherence to MIL-STD-129 and ASTM D3951 for labeling and packing, with palletization executed according to RP001 DLA Packaging Requirements. To maintain component integrity during transit, the contractor must utilize MIL-SPEC crates and specialized moisture barriers. The project entails the processing of 21 units, which are to be packed and labeled for FOB Destination shipment. Managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, the performance of these services is located in zip code 95304-5000. The solicitation was posted on November 6, 2026, with a response deadline of November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and LabelingThis subcontract opportunity, titled Military-Grade Packaging and Labeling, involves providing specialized packaging and preparation services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will be responsible for packaging critical application hardware according to ASTM D3951 standards and ensuring all labeling and marking comply with MIL-STD-129 using approved systems. The final deliverable consists of shipping-ready containers that meet all DLA packaging and marking requirements. The project will be performed in New Cumberland, Pennsylvania, under NAICS code 488510. Interested parties should note that the solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

Temperature-Controlled International Medical FreightThis subcontract for Temperature-Controlled International Medical Freight involves the transport and delivery of temperature-sensitive medical supplies for prime contractors supporting DLA Troop Support Medical Supply Chain Pharm FSA projects. The scope of work requires hauling materials FOB Destination to the USA Med Mat Ctr EUR located in Kaiserslautern, Germany. To ensure product integrity, the contractor must utilize cold chain logistics to maintain a USP controlled room temperature between 20 and 25 degrees Celsius. Compliance with strict packaging and labeling standards is mandatory, specifically adhering to MIL-STD-2073-1E and Medical Marking Standard No. 1. The contractor is responsible for ensuring all products are delivered in the required condition. This opportunity falls under NAICS code 488510 and is managed by the Department of Defense.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Secure Shipping ServicesThis subcontract involves the provision of specialized packaging, marking, and shipping services for prime contractors supporting the DLA Weapons Support Active Devices Division. The scope of work requires the secure delivery of 16 units to a designated inspection point in New Cumberland, Pennsylvania. All services must strictly adhere to military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. To ensure security, the contractor must implement Protected Cargo protocols by omitting nomenclature from all containers. Preservation materials must be applied in accordance with QUP:001 and PRES MTHD:41. This requirement falls under NAICS code 488510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Active Devices Division. The scope of work focuses on the handling of sensitive electronic components, requiring strict adherence to MIL-STD-2073-1E and MIL-DTL-19491 for packaging, and MIL-STD-129 and IPC/JEDEC J-STD-609 for marking. All shipments must utilize approved MIL-SPEC preservation and cushioning materials to ensure components are fully prepared for delivery to DLA Distribution Warner Robins. The project is categorized under NAICS code 488510 and will be performed at Robins Air Force Base. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 6, 2026. The primary objective is to deliver fully compliant, ready-to-ship packages that meet all rigorous military specifications for sensitive electronic hardware.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Logistics ServicesThis subcontract for MIL-SPEC Packaging and Logistics Services involves providing packaging materials and performing packing and marking services for prime contractors supporting DLA supply contracts. The scope of work requires the delivery of three packaged and marked flanges to DLA Distribution DDSP New Cumberland. All activities must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001, specifically utilizing Pack Code U and preservation method MTHD:31. Managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, the contract falls under NAICS code 488510. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 10, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing military-grade packaging, marking, and palletization services for electronic components, specifically resistors, to support the DLA Weapons Support Active Devices Division. The contractor is responsible for ensuring all deliverables are shipping-ready and fully compliant with strict military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. These tasks require the use of specialized MIL-SPEC materials and equipment to meet Department of Defense requirements. The final products are to be delivered to the Aviation Support Detachment located in Fort Worth, Texas. This opportunity falls under NAICS code 488510 and is managed through the DLA Weapons Support Active Devices Division. Interested parties should note the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services involves providing specialized military-grade packaging and logistics for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires packaging hardware in strict accordance with MIL-STD-2073-1E and DLA RP001, applying necessary markings per MIL-STD-129, and managing FOB Origin shipping through the First Destination Transportation program. The final deliverables include properly packaged transmitters and all required shipping documentation. The project is managed under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 13, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Supply of TEE, TUBE TO BOSSThis subcontract involves the manufacture and supply of TEE, TUBE TO BOSS hardware for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for sourcing or producing components that strictly adhere to technical specifications and ensuring all items are delivered to the designated performance location in New Cumberland. Compliance is a critical component of this agreement, requiring strict adherence to DFARS 252.225-7001 Buy American and Balance of Payments Program regulations. Additionally, all hardware must be packaged according to ASTM D3951, labeled per MIL-STD-129, and palletized in accordance with RP001 DLA Packaging Requirements to meet military standards.

POSTED

about 24 hours ago

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720012242968)This subcontract involves the supply of 103 nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing assemblies that meet the technical specifications for Danfoss P/N 1C12408HHH028AAA, Parker-Hannifin P/N 24221-8S-0280, or Safran P/N CCH12019. All deliverables must be packaged according to RP001 and marked in compliance with MIL-STD-129. The project falls under NAICS code 339999 and is centered in Barstow, California. Interested parties must respond by November 16, 2026, to provide the required compliant hose assemblies under NSN 4720012242968.

All Other Miscellaneous Manufacturing

POSTED

about 24 hours ago

DEADLINE

Loop Clamp SupplyThis subcontract involves the supply of 6,732 critical application loop clamps for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be manufactured or sourced in strict accordance with part standard SAE AS21919E Revision E and Part Piece Number AS21919WDG06. Performance will take place at Tinker AFB, with all deliverables adhering to MIL-STD-2073-1E packaging standards and the DLA Master List of Technical and Quality Requirements. The contract specifically manages TYPE I CODE Y items, which carry a non-extendable shelf life of 180 months. Interested parties must respond by November 16, 2026, regarding this requirement under NAICS code 332312 for the Department of Defense.

Fabricated Structural Metal Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply of Straight Tube-to-Boss AdaptersThis subcontract involves the supply of 432 straight tube-to-boss adapters, identified by NSN 4730013542660, for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The contractor is responsible for manufacturing or sourcing the adapters to meet strict technical specifications, ensuring all items are packaged according to MIL-STD-2073-1E and shipments are marked in compliance with MIL-STD-129. The project falls under NAICS code 332710 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, following the posting date of November 6, 2026.

POSTED

about 24 hours ago

DEADLINE

Manufacture of Straight Pipe-to-Hose Adapter (NSN 4730-01-330-3596)This subcontract involves the manufacture of one straight pipe-to-hose adapter, part number 1243-2294-2, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The component must be fabricated from copper alloy materials and strictly adhere to NAVSEA 5100-003D mercury-free requirements. The selected provider is required to supply comprehensive material traceability documentation and certify that the delivered part is in a new and unused condition. This procurement falls under NAICS code 332710 and is managed by the Department of Defense.

POSTED

about 24 hours ago

DEADLINE

Pipe Nipple Supply (NSN 4730001962037)This subcontract involves the supply of 16 pipe nipples for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing the components in strict accordance with the dimensions and material standards specified by NSN 4730001962037. All deliverables must adhere to DLA quality standards and comply with the Nonmanufacturer Rule under FAR 52.219-33. Logistics for the contract are managed through the First Destination Transportation program, with the place of performance located in New Cumberland. The opportunity was posted on November 6, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332996.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 24 hours ago

DEADLINE

Copper Alloy Pipe Tee SupplierThis subcontract involves the procurement of one Copper Alloy Pipe Tee to support prime contractors for the DLA Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or sourcing a component that strictly adheres to NSN 4730-01-191-4102 specifications. Additionally, the contractor must ensure full compliance with the Buy American Act and RA001 quality requirements. The scope of work includes specialized packaging and marking in accordance with MIL-STD-129, MIL-STD-2073-1E, and DLA requirement RP001. Once processed, the final product must be delivered to the Trident Refit Facility located in Kings Bay. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply of Metallic Tubes (NSN 4710-01-541-1223)This subcontract, issued by the Department of Defense DLA Weapons Support Fluid Handling Division, requires the manufacture or distribution of 12 specialized metallic tubes identified by NSN 4710-01-541-1223. These components are intended for prime contractors working on Department of Defense FDT program projects and must be delivered to the designated destination in Tracy, California, within 168 days. All items must strictly adhere to established DoD transportation and shipping regulations. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332410. Interested parties must respond by November 16, 2026, following the posting date of November 6, 2026.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 24 hours ago

DEADLINE

Manufacture and Supply of Nonmetallic Hose AssembliesThis subcontract involves the manufacture and supply of 30 nonmetallic hose assemblies, specifically NSN 4720-01-339-8531, for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the units in accordance with the DLA Master List of Technical and Quality Requirements and ensuring all items are packaged according to ASTM D3951 and MIL-STD-129 standards. The agreement requires strict adherence to the Buy American Act and the Hazard Communication Standard 29 CFR 1910.1200. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 339113. The response deadline for this opportunity is November 16, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 24 hours ago

DEADLINE

Metal Tube Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of 106 specialized metal tube assemblies for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing assemblies to precise technical specifications and part numbers 1MB902, 9081001, and 9081001P. Due to the nature of the components, the contractor must implement rigorous quality control for items designated as Critical Application Items and ensure all procurement packaging requirements are met. The project is categorized under NAICS code 332312 and will be performed in New Cumberland. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026. The final products are intended for prime contractors who are delivering on larger DLA supply contracts.

Fabricated Structural Metal Manufacturing

POSTED

about 24 hours ago

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the supply of two nonmetallic hose assemblies identified by NSN 4720016071563. The selected supplier is responsible for manufacturing or sourcing these items for prime contractors on DLA supply contracts, with performance taking place in New Cumberland. Strict compliance is required regarding environmental and documentation standards, specifically the prohibition of Class I ozone depleting chemicals during production. Additionally, the supplier must provide comprehensive supply chain traceability documentation in accordance with DLA Directive Procurement Note C03. The response deadline for this opportunity is November 16, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 24 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

MIL-SPEC Packaging and Marking Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

DLA Compliant Packaging and Hazardous Material Labeling

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

DDSP NEW CUMBERLAND FACILITY

POSTED

about 24 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging and Hazardous Materials Handling

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

Military Packaging and Marking Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and Marking

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 24 hours ago

DEADLINE

Kitting and Military-Standard Packaging Services

DLA DIST SAN JOAQUIN

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Waterproof/Greaseproof Packaging Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Hazardous/Regulated Air Freight Packaging Services

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization Services

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 24 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS