Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Packaging, Marking, and Cleanliness Compliance for Military Repair Parts

Active

Response Deadline09/24/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of The Navy → Navsup Weapon Systems Support MechView Agency

NAICS

323113 - Commercial Screen PrintingView NAICS

Place of Performance

MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

SBA

Documents

This scope was carved out of N0010426QED07.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SWITCH CONNECTOR AY — 5930016528200 — N0010426QED07

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 25

subcontract

Response DeadlineSep 24

Submission deadline

Response Deadline

09/24/2026, 08:30:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide MIL-PRF-23199-compliant packaging using MIL-DTL-24466 green poly bags, cleanliness control (e.g., Reactor Plant Clean), and GHS/military labeling.

Similar Contracts

Same NAICS industry code

Specialized Packaging and Kitting ServicesThis subcontract for Specialized Packaging and Kitting Services involves the commercial and military-compliant packaging of Pathogel test kits. The scope of work focuses on securing the kits into unit and shipping containers to prevent damage and breakage while ensuring all materials are export-ready and compliant with carrier insurance requirements. The project is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, with the place of performance located at Fort Bragg, zip code 28310. The solicitation was posted on August 25, 2026, and requires a response by August 31, 2026. The contract falls under NAICS code 323113.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Specialized Packaging and Marking ServicesThis subcontract opportunity with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, requires the provision of military-compliant packaging and marking services for conductor splices. The scope of work includes preservation, cushioning, containment, and labeling in strict accordance with DLA standards. Performance for this contract will take place in Norfolk, Virginia. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 323113. Interested parties must submit their responses by the deadline of September 2, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Packaging and Marking for Defense Shipment

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Secure Packaging and Logistics for Sensitive ElectronicsThe Department of Defense Active Devices Division is seeking a subcontractor for the design and supply of specialized packaging for sensitive electronics. The requirements specify that all packaging must be ESD-protected and compliant with MIL-STD-2073-1E, utilizing Code ZZ cushioning and specific marking standards. Logistics for the contract are established under FOB Origin terms for domestic shipping. This opportunity is a total small business set-aside under NAICS code 323113, with the place of performance located in Columbus, Ohio. Interested parties must submit their responses by September 4, 2026, following the posting date of August 24, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services, issued by the Department of Defense under the Albany Transportation Officer, requires the provision of specialized services for military power supply units. The contractor must ensure all labeling is MIL-STD-130N compliant, specifically including data matrix marking, and that all packaging adheres to ASTM-D3951 standards, including the use of transit-tested packaging. The opportunity was posted on August 24, 2026, with a response deadline of September 9, 2026. It falls under NAICS code 323113 and is managed through the DIBBS procurement system.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

Specialized ESD-Safe Packaging and Marking Services

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

UNR - (Rebid) Outsourced Screen Printing & Embroidery Related Services for Athletics

Solicitation # RFP 9129

This solicitation, identified as RFP 9129, is a rebid for outsourced screen printing and embroidery related services for athletics through the Nevada Government Marketplace. The contract requires all bid responses to be submitted exclusively through the electronic NGEM system, as BCN Purchasing will no longer accept hard copy documents for any solicitation type. Bidders are encouraged to utilize the system's save functionality to prepare their responses in advance and ensure all required documentation is uploaded before the deadline. The response deadline for this opportunity is September 4, 2026, at 10:00 PM. Once the solicitation closes and responses are electronically unsealed, a list of bidders and the corresponding bid tabulation will be made available to the public online via the Closed Bid Opportunities section of the website. Detailed requirements regarding the specific scope of work are contained within the Statement of Work attachment provided with the RFP. For inquiries, the primary point of contact is Jennifer Genosick.

Nevada Government Marketplace

POSTED

DEADLINE

Depot Level Repairable (DLR) Label FabricationThe Department of Defense, through the Navsup Weapon Systems Support Mech, is seeking a subcontractor for the fabrication of Depot Level Repairable labels. These labels must be produced with a yellow-on-blue color scheme and are intended for use on repairable military items. To ensure operational effectiveness, all labels must strictly adhere to MIL-STD-129 Section 4.2.2 requirements, specifically regarding readability, water resistance, and adhesion. This opportunity is categorized under NAICS code 323113. The solicitation was posted on August 24, 2026, and the deadline for responses is September 21, 2026, at 8:30 PM. Interested parties can find further details and submission guidelines through the provided government workspace link.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

MIL-STD-129 Labeling and Marking ServicesThis subcontract opportunity with the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the printing and application of standardized military shipping and container labels. The scope of work requires strict adherence to MIL-STD-129 guidelines, ensuring that all PID, CLIN, SubCLIN, and DLR markings are accurately applied to containers. The project falls under NAICS code 323113 and was posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 21, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Specialized Packaging, Labeling & IUID MarkingThis subcontract opportunity with the Department of Defense, specifically the Navsup Weapon Systems Support Mech, requires the provision of specialized packaging, labeling, and Item Unique Identification marking. The selected provider must ensure all deliverables are MIL-STD-compliant and include specific requirements such as SMIC codes and Data Matrix barcodes. The project falls under NAICS code 323113 and was posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 8, 2026, at 8:30 PM.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Labeling and Identification SuppliesThe University Hospital of the West Indies, under the Government of Jamaica, is seeking a subcontractor for the supply of labeling and identification materials. This contract focuses on providing essential labels for hospital operations, which may include asset tags, inventory labels, and compliance labeling for various medical equipment and supplies. The procurement is categorized under NAICS code 323113 and was posted on August 23, 2026. Interested parties can find further details and submission requirements through the official government electronic procurement portal.

University Hospital of the West Indies

POSTED

DEADLINE

Perforation and Finishing for Training EvaluationThis subcontract, titled Perforation and Finishing for Training Evaluation, is issued by the Department of Natural Resources MRM Administration. The scope of work requires the precision perforation of a single sheet, specifically pages 53 through 54, within each manual to facilitate the easy removal of the training course evaluation form. The opportunity was posted on August 20, 2026, with a response deadline of September 3, 2026. This project falls under NAICS code 323113 and is managed through the OhioBuys procurement system.

Dnr850100 Mrm Administration Dnrfra, Dnr-dept Of Natural Resources

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support Mech

Same awarding agency

VALVE,REGULATING,FL — 4810014606869 — N0010426QDB70

Solicitation # N0010426QDB70

This contract specifies the requirements for the repair of a regulating valve, identified by CAGE code 53711 and reference number 5497337-59. All work must be performed according to the contractor's standard repair practices and approved technical directives. The item must be physically identified per MIL-STD-130, and any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless it is a simple part number change. The contractor is responsible for all inspection and testing in accordance with the original manufacturer's specifications, and must maintain inspection records for 365 days following final delivery. Packaging and marking must comply with MIL-STD 2073. Additionally, the contract mandates that only authorized distributors of the original manufacturer will be considered for the award, and they must provide proof of authorization on company letterhead.

Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

PLATE,COVER ASSY — 4320011953116 — N0010426QFG68

Solicitation # N0010426QFG68

This contract governs the procurement of a Cover Plate Assembly designated as Special Emphasis material for use in critical shipboard systems. Due to the high risk associated with material failure, the contract mandates strict quality control, including the use of hot forged Alloy C71500 and comprehensive non-destructive testing such as ultrasonic and dye penetrant inspections. The contractor must adhere to a quality system compliant with ISO-9001 and provide detailed certifications of compliance, chemical and mechanical analyses, and objective quality evidence. Key requirements include strict configuration control, where all waivers, deviations, and engineering change proposals must be approved by the Contracting Officer. Welding and brazing processes require prior submission and approval of qualification data and procedures. The contract also prohibits the intentional use of mercury and requires full traceability of materials. Final acceptance is contingent upon government source inspection and the submission of certification data via the Wide Area Work Flow system to the Portsmouth Naval Shipyard prior to shipment.

Plate Work Manufacturing

POSTED

about 21 hours ago

DEADLINE

STRAINER BODY,SEDIM — 4730015025837 — N0010426QEF22

Solicitation # N0010426QEF22

This contract outlines the technical and procedural requirements for the manufacture and delivery of a sediment strainer body for the Department of the Navy. It establishes a strict order of precedence for document conflict resolution, prioritizing contract amendments and the schedule of supplies over technical data and drawings. Contractors must adhere to specified document revisions and are prohibited from using mercury or mercury-containing compounds in the hardware. Technical documents are managed via a secure portal, and materials subject to NOFORN distribution statements require prior approval from the Naval Sea Systems Command before being shared with foreign nationals. The agreement mandates a rigorous quality assurance and packaging process, specifically referencing MIL-PRF-23199 and MIL-STD-2073 for cleanliness and protection. Contractors are required to submit a procedure package including drawings and pre-manufacturing submittals within 45 days of the award, as well as a final package of certified test and inspection reports upon completion. Any requests for waivers or deviations regarding technical requirements or delivery dates must be submitted with detailed technical justification to ensure that the form, fit, and function of the parts are not compromised.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month

VALVE,DPHRM CONT — 4820013622979 — N0010426QTC27

Solicitation # N0010426QTC27

This contract outlines the requirements for the repair of the VALVE, DPHRM CONT, ensuring it meets specific operational and functional standards based on provided Cage Codes and reference numbers. All work must adhere to the contractor's standard practices and approved government technical procedures. Physical identification and marking must comply with MIL-STD-129, and any changes to design, materials, or part numbers require written approval from the NAVICP-MECH Contracting Officer, except for simple part number changes. A critical requirement of this contract is the strict prohibition of metallic mercury and mercury contamination, as the item is intended for use on submarines and surface ships. The contractor is responsible for all inspection and testing according to original manufacturer specifications and must maintain detailed records for 365 days following delivery. Packaging and preservation must follow MIL-STD 2073 and the specific contract schedule.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

ANTENNA BICONE — 5985015884579 — N0010426QSD51

Solicitation # N0010426QSD51

This contract outlines the requirements for the manufacture and supply of the Antenna Bicone, specifically identified by Cage Code 14304 and reference number RF-9070. The contractor is responsible for ensuring all items meet the specified design and quality standards, including physical identification according to MIL-STD-130 and packaging in accordance with MIL-STD 2073. Any changes to design, materials, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update. The contractor maintains full responsibility for inspection and quality assurance, with the requirement to keep all inspection records for 365 days following final delivery. The government reserves the right to perform its own inspections to ensure compliance. Additionally, award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. All provided documents and drawings are subject to specific distribution statements to control the safeguarding of information.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

ELECTRONIC MODULE,S — 5963014388510 — N0010426QSD49

Solicitation # N0010426QSD49

This contract outlines the requirements for the manufacture and delivery of electronic modules under solicitation N0010426QSD49 for the Department of the Navy. The items must adhere to the design represented by Cage Code 07618 and reference number 66612406. Physical identification must comply with MIL-STD-130, and packaging must follow MIL-STD 2073. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update under Code 1. The contractor is responsible for all inspection and quality assurance requirements, with the government retaining the right to perform independent inspections. All inspection records must be maintained for 365 days following final delivery. Additionally, the contract specifies strict distribution statements for technical documents and requires that only authorized distributors of the original manufacturer be considered for the award.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 21 hours ago

DEADLINE

ELECTRONIC COMPONEN — 5998016006552 — N0010426QSD52

Solicitation # N0010426QSD52

This contract establishes the requirements for the repair of an electronic component, specifically identified by Cage Code 7Y193 and reference number H416467-1. All repair work must adhere to the contractor's standard practices and approved technical manuals, with physical identification following MIL-STD-130 and packaging conforming to MIL-STD 2073. Any substitutions or design changes require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update designated as Code 1. The contractor is responsible for all inspection and testing based on original manufacturer specifications, and must maintain all quality records for 365 days following final delivery. The agreement emphasizes strict adherence to distribution statements for Navy documents and provides detailed guidelines for obtaining necessary technical specifications through the Department of Defense Single Stock Point and other designated authorities. The contract is issued by the Navsup Weapon Systems Support Mech for performance in Mechanicsburg, Pennsylvania.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

ANTENNA PEDESTAL AS — 5985017311410 — N0010426QSD53

Solicitation # N0010426QSD53

This contract establishes the requirements for the repair and quality assurance of the Antenna Pedestal AS, identified by Cage Code 2D851 and reference number M1000031. All repair work must adhere to the contractor's standard practices, technical orders, and approved government documents. Physical identification must comply with MIL-STD-130, and packaging must follow MIL-STD 2073. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, except for simple part number changes. The contractor is responsible for all inspection and testing based on original manufacturer specifications, with records maintained for 365 days following final delivery. The government retains the right to perform independent inspections to ensure compliance. Award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. Distribution of technical data is governed by specific distribution statement codes to ensure the safeguarding of sensitive information.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

FAN,TUBEAXIAL — 4140016029995 — N0010426QSD50

Solicitation # N0010426QSD50

This contract outlines the requirements for the repair of a tube axial fan, specifying that all work must adhere to contractor repair standards, technical orders, and approved government documents. The contractor is responsible for ensuring the item meets operational and functional requirements associated with the provided Cage Codes and reference numbers. Physical identification must comply with MIL-STD-130, and packaging must follow MIL-STD 2073. The contractor maintains full responsibility for inspection and quality assurance, including the maintenance of inspection records for 365 days following final delivery. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless it is a simple part number change. Additionally, award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

CIRCUIT CARD ASSEMB — 5998015108820 — N0010426QQC49

Solicitation # N0010426QQC49

This contract outlines the requirements for the repair of circuit card assemblies, specifically referencing items under cage code 1VPW8. All repair work must adhere to the contractor's standard practices and approved technical directives, including original manufacturer specifications and drawings. Physical identification of the items must comply with MIL-STD-130, and packaging must follow MIL-STD 2073. The contractor is responsible for all inspection and testing, though the government maintains the right to perform its own inspections to ensure compliance. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update. Detailed records of all inspection work must be maintained for 365 days following final delivery. Additionally, award consideration is limited to authorized distributors of the original manufacturer's items.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

CIRCUIT CARD ASSEMB — 5998200122289 — N0010426QSD48

Solicitation # NO0014-26-Q-SD48

This contract outlines the requirements for the repair of circuit card assemblies, specifically referencing Cage Code 38370 and part numbers 149227-2 and 149227-3. All work must be performed according to the contractor's standard repair practices and approved government documents, with physical identification adhering to MIL-STD-130. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update where the items remain identical. The contractor is responsible for all inspection and testing based on original manufacturer specifications, and must maintain these records for 365 days following final delivery. Packaging and preservation must comply with MIL-STD 2073. Additionally, the contract specifies that only authorized distributors of the original manufacturer will be considered for the award, and all provided technical documents must be handled according to their specific distribution statement codes.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

Depot-Level Repair of Regulating Valves (NIIN: 014606868)

Industrial Valve Manufacturing

POSTED

DEADLINE