Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Packaging, Marking, and Hazardous Materials Compliance Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
Federal
Independent Testing & Commissioning
FA5240 36 Cons Lgc

POSTED

about 4 hours ago

DEADLINE

N/A
NAICS: 541380
New
Federal
Fuel System Integrity Testing & Calibration
Base Miami Beach

POSTED

about 4 hours ago

DEADLINE

in 15 days
NAICS: 541380
New
International
OGDC-SCM-SER-CB-DO-342367717-2026 HIRING OF TUBULAR INSPECTION SERVICES
Solicitation # OGDC-SCM-SER-CB-DO-342367717-2026
The Oil & Gas Development Company Limited (OGDCL) has issued solicitation number OGDC-SCM-SER-CB-DO-342367717-2026 for the hiring of tubular inspection services to be performed in Pakistan. This procurement opportunity was posted on October 29, 2026, and requires interested parties to submit their e-bids through the SAP Ariba Discovery portal. The deadline for bid submissions is November 16, 2026, at 14:30 hours, with bid openings scheduled to occur 30 minutes after the closing time. Administrative inquiries and coordination are managed by the General Manager of Supply Chain Management at the OGDC Headquarters in Islamabad. While the specific contract value and detailed performance schedules are not provided in the initial solicitation notice, the primary objective is the procurement of specialized tubular inspection services.
Oil & Gas Development Company Limited (OGDCL)

POSTED

about 5 hours ago

DEADLINE

in 18 days
NAICS: 541380
New
SLED
Construction Testing and Inspection Services
City of Roseville

POSTED

about 5 hours ago

DEADLINE

in 5 days
NAICS: 541380
New
Grant
Independent Performance Verification and Testing
National Research Foundation of Korea

POSTED

about 6 hours ago

DEADLINE

in 13 days
NAICS: 541380
New
SLED
Hazardous Materials Sampling and Laboratory Analysis
California State University, Chico

POSTED

about 7 hours ago

DEADLINE

in 14 days
NAICS: 541380
New
SLED
Specialized Testing and Materials Lab Services
California State University, Chico

POSTED

about 7 hours ago

DEADLINE

in 14 days
NAICS: 541380
New
SLED
DSA-Approved Materials Testing and Special Inspection
Solana Beach School District

POSTED

about 8 hours ago

DEADLINE

in 12 days
NAICS: 541380
New
Transient Condition & Pressure TestingThis subcontract opportunity, titled Transient Condition and Pressure Testing, is issued by Garney Companies, Inc. for specialized testing services on Charles County Government projects. The selected contractor will be responsible for performing pressure and transient testing for prime contractors, specifically focusing on pump shutdowns and monitoring pressure at the flowmeter vault to ensure levels remain above 15 psig. The final deliverable for this engagement is a comprehensive testing and commissioning report that verifies transient stability. This opportunity is specifically set aside for SBA certified Women-Owned Small Businesses and Disadvantaged Business Enterprises under NAICS code 541380. Interested parties must submit their responses by the deadline of November 9, 2026.
Garney Companies, Inc.

POSTED

about 10 hours ago

DEADLINE

in 10 days
NAICS: 541380
New
SLED
Paving Materials Testing
NYS Department of Transportation

POSTED

about 12 hours ago

DEADLINE

in 22 days
NAICS: 541380
New
SLED
Fire Flow Testing and Hydrant/Valve Inspection ServicesThis subcontract for Fire Flow Testing and Hydrant/Valve Inspection Services involves performing hydraulic testing of fire hydrants and inspections of water distribution valves for prime contractors on WSSC Water projects. The scope of work includes conducting fire flow tests for static and residual pressure, operating valves, and utilizing MDE-compliant dechlorination methods. The selected provider must utilize Pitot gauges and hydraulic testing tools and is responsible for delivering all completed tests and inspection reports. A critical qualification for this engagement is that at least one crew member must possess a Maryland Water Distribution (WD) Operator D-1 license. The opportunity is managed by the Utility Services Department in Maryland under NAICS code 541380, with a response deadline set for November 30, 2026.
Utility Services Department

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Fire Flow Testing Services
Solicitation # 121589
WSSC Water is soliciting bids for Fire Flow Testing Services to support the planning, locating, inspection, and testing of approximately 46,000 fire hydrants and associated water distribution components across various pressure zones in Maryland. The scope of work includes performing fire flow tests, hydrant and valve inspections, managing water shutdowns, and implementing traffic control for residential, county, and state roads. The contract is structured with a one-year base term and four optional one-year extensions. Award will be made to a single, responsive, and responsible bidder based on the lowest total price, provided they meet strict minimum qualifications, including five years of prime experience in fire flow testing, the ability to deploy at least two simultaneous crews, and the employment of at least one crew member with a Maryland Water Distribution System Operator D-1 license. Bidders must submit a comprehensive set of documentation via the eProcurement portal by November 30, 2026, including a safety and health program questionnaire, a certificate of insurance, and various certifications regarding non-discrimination and Iran investment activity. Technical requirements include the submission of a detailed QA/QC plan and an equipment list featuring specialized tools like Pitot gauges and dechlorination equipment. The contract emphasizes compliance with AWWA and MDE standards, specifically regarding the discharge of chlorinated water. Notably, the agreement excludes the COVID-19 pandemic from Force Majeure claims and requires strict adherence to security background investigations for accessing sensitive facility plans. Payment is processed via ACH or procurement credit card within 30 days of accepted delivery, with a potential award factor based on prompt payment discounts.
Utility Services Department

POSTED

about 16 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

This subcontract involves providing technical compliance services for the packaging, marking, and hazardous materials documentation of helical compression seats. The services must adhere to all Department of Defense and Defense Logistics Agency standards to ensure the safe and compliant shipment of these components. The project is managed by the Land Supply Chain within the Department of Defense and will be performed in Tracy, California. Interested parties must submit their responses by August 24, 2026, under NAICS code 541380.

General Info

Technical compliance services for helical compression seats in Tracy, CA. Due August 24, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAIN

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-26-T-968R.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAT, HELICAL COMPRE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide technical compliance services for military packaging, labeling, and hazardous materials documentation in accordance with DLA and DoD standards for shipment of the helical compression seat.

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and International Shipping to JapanThis subcontract through the Department of Defense Land Supply Chain involves providing specialized military-grade packaging and international freight services for prime contractors fulfilling DLA supply contracts. The scope of work requires packaging items according to MIL-DTL-117, Type II, Class C, Style 1 standards using opaque, waterproof, and greaseproof bags, with all markings and Do Not Bend codes applied in accordance with MIL-STD-129. The contractor is responsible for coordinating the international shipping of these materials to Yokosuka, Japan, with delivery terms set as FOB Destination. This requirement falls under NAICS code 488510 and is associated with a performance location in FPO 96349.
Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 326220
New
DIBBS
Supply of Pentair Pump Group O-Rings (NSN 5331012906094)This subcontract through the Department of Defense Land Supply Chain requires the procurement of 10 O-rings specifically matching Pentair Pump Group part number 00150-023-1 and NSN 5331012906094. The items are intended for prime contractors fulfilling DLA supply contracts and must be sourced or manufactured to strict specifications. Compliance requirements mandate that the materials be free of asbestos and Class I ozone-depleting chemicals, and the components must not be produced using additive manufacturing. Additionally, the supplier must provide full supply chain traceability in accordance with DLA Directive Procurement Note C03. The performance location for this delivery is FPO 96349.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-229V
Solicitation SPE7L1-26-T-229V is a fixed-price, small business set-aside procurement for 10 O-rings (NSN 5331012906094), referencing Pentair Pump Group part number 00150-023-1. The requirement is managed by the Department of Defense Land Supply Chain, with a required delivery date of March 19, 2026, to a freight shipping address in Yokosuka, Japan. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS). The contract mandates strict material and quality standards, prohibiting the use of asbestos and Class I ozone-depleting chemicals. Items must be free of additive manufacturing processes unless specifically authorized. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using medium duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays, with marking adhering to MIL-STD-129 and a special do not bend code. Contractors are required to maintain supply chain traceability documentation per DLA Directive Procurement Note C03. Administrative requirements include electronic invoicing through the Wide Area WorkFlow (WAWF) system and compliance with the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333415
New
DIBBS
COOLER, LUBRICATING
Solicitation # SPE7L1-26-T-11D2
Solicitation SPE7L1-26-T-11D2 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of one lubricating cooler, identified by NSN 2930-01-439-0535. The item is designated as a critical application item and is intended for delivery to the USS HOWARD DDG 83. The required delivery date is August 27, 2026, with a delivery window of five days after the order is placed. Shipping is established as FOB Destination, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including DLA packaging requirements (RP001), MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging data. Specific environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except where functionally required. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. The procurement is categorized under NAICS code 333415 and incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding of defense information, and prohibitions on certain telecommunications equipment.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 561910
New
DIBBS
MIL-SPEC Packaging and Preservation ProviderThis subcontract opportunity is for a MIL-SPEC Packaging and Preservation Provider to support prime contractors on DLA Land and Maritime projects. The selected provider will be responsible for the specialized packaging and labeling of critical rubber components, specifically O-rings, to ensure they are ready for shipment to DLA Distribution. To prevent UV deterioration, the provider must utilize medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117. All marking and packaging operations must be executed according to MIL-STD-2073-1E and MIL-STD-129 standards. The work will be performed in New Cumberland, Pennsylvania, under the agency oversight of the Department of Defense Land Supply Chain. Interested parties should note the response deadline of October 30, 2026.
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 326111
New
DIBBS
Critical Application O-Ring SupplierThis subcontract involves the supply of 13 critical application O-rings for prime contractors supporting DLA Land and Maritime projects. The required components must match NSN 5331012670108, Parker-Hannifin P/N P-84444-13, or Curtiss-Wright P/N PD41047 Item 13. All materials must be asbestos-free and mercury-free in strict compliance with FED-STD-313. The selected supplier is required to maintain NIST SP 800-171 cybersecurity compliance. Delivery of the items is designated as FOB Origin to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 326111 and is managed by the Department of Defense Land Supply Chain.
Plastics Bag and Pouch Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 326199
New
DIBBS
Supply of Dial Windows (NSN 5355000580337)This subcontract involves the manufacture and supply of 98 dial window components identified by NSN 5355000580337 for prime contractors supporting Department of Defense DLA supply contracts. The selected provider must utilize precision cutting, molding, or additive manufacturing in accordance with L31 standards to ensure all hardware meets strict military technical specifications. Managed by the Land Supply Chain agency, the project is categorized under NAICS code 326199. Performance of the contract will take place in San Diego, California, with a response deadline set for October 30, 2026.
All Other Plastics Product Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-101U
Solicitation SPE7L1-26-T-101U is issued by the DLA Land and Maritime Land Supply Chain for the procurement of 13 O-rings, identified as critical application items under NSN 5331012670108. Approved sources include Parker-Hannifin Corp (P/N P-84444-13) and Curtiss-Wright Flow Control Corporation (P/N PD41047 Item 13). The contract requires delivery within 194 days after order, with a required delivery date of September 10, 2026, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The items must adhere to strict material restrictions, specifically prohibiting the use of asbestos as defined in FED-STD-313 and the intentional addition of mercury or mercury-containing compounds. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, requiring the use of medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program for quotes above the micro-purchase threshold. The solicitation incorporates various FAR and DFARS clauses regarding equal opportunity, waste reduction, and cybersecurity standards, including NIST SP 800-171. Offerors must submit quotations by February 27, 2026, and provide a complete data package if proposing alternate parts.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-18Q4
Solicitation SPE7L1-26-T-18Q4 is a fixed-price request for quotation issued by the DLA Land and Maritime Land Supply Chain for the procurement of 11 O-rings. The required items are identified by NSN 5331-21-914-3719 and correspond to Reelcraft Industries Inc part numbers 314300-3 or 3600-29-13-15 Item 9. These components are designated as Type I Code Y items with a non-extendable shelf life of 180 months. The need ship date is March 1, 2027, with a required delivery date of March 5, 2027, delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict packaging and marking standards to prevent deterioration from ultraviolet rays. Items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, with general packaging following MIL-STD-2073-1E and marking adhering to MIL-STD-129. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and the prohibition of trafficking in persons.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 332999
New
DIBBS
PANEL, BODY, VEHICULAR
Solicitation # SPE7L1-26-T-12H8
Solicitation SPE7L1-26-T-12H8 is a request for quotations from the DLA Land and Maritime Land Supply Chain for the procurement of 2,000 vehicular body panels, identified as NSN 2510016734265 and part number 153097-176-1 by Hydraulics International, Inc. This item is designated as a critical application item. The delivery requirement is set for 5 days after order, with an original required delivery date of September 9, 2026. Shipping is FOB Origin, with the destination for inspection and acceptance located in Jacksonville, Florida. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. Additionally, the use of Class I ozone-depleting chemicals is prohibited. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding equal opportunity, human trafficking, and cybersecurity. Offerors must submit quotes via the DIBBS portal and maintain active registration in the System for Award Management.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 333310
New
DIBBS
MANIFOLD ASSEMBLY, HYDR
Solicitation # SPE7L1-26-T-986F
Solicitation SPE7L1-26-T-986F is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of one hydraulic manifold assembly, identified by NSN 2590016802969 and Twin Disc Incorporated part number PX92992A. This commercial item is to be delivered FOB Origin to Virginia Beach, Virginia, with a required delivery date of August 13, 2026, and a delivery window of 20 days after order. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and the Berry Amendment for domestic material restrictions. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS) under NAICS code 333310.
Commercial and Service Industry Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 327999
New
DIBBS
WINDOW, DIAL
Solicitation # SPE7L1-26-T-700L
Solicitation SPE7L1-26-T-700L is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of 98 units of Window, Dial, identified by NSN 5355-00-058-0337. The items must be manufactured according to Basic Drawing NR 94580 967593, Revision B, dated April 4, 1967. Delivery is required by January 23, 2027, with a need ship date of November 28, 2026, shipping FOB Origin to DLA Distribution San Diego, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging requirements (RP001), ASTM D3951, and marking standards MIL-STD-129 and MIL-STD-130N. Due to the nature of the technical data, the procurement is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorization. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the solicitation incorporates the Buy American Act and Berry Amendment restrictions, and offers a price evaluation preference for certified HUBZone small business concerns.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
DIBBS
Quality Testing and Inspection Services
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Traceability and Marking for Military Shipments
NUCLEAR REACTOR PROGRAM

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Testing Services
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Counterfeit Parts Detection and Reporting
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Radioactive Materials Labeling (If Applicable)
LAND SUPPLY CHAIN

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) Services
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Testing and Quality Assurance (Sampling)
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) Services
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Calibration & Quality Assurance Services
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Fastener Inspection & Quality Conformance Services
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Testing Services
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Radioactive Materials Labeling & Notification Services
LAND SUPPLY CHAIN

POSTED

3 months ago

CLOSED

2 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS