Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Packaging, Marking & Serialization Services

Active

Federal

Response Deadline08/10/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires full-service packaging, labeling, serialization, and shipping documentation for tool kits, strictly adhering to MIL-STD-129R standards. All labeling must include generated barcodes and mandatory markings such as AAC, NSN, CAGE, and contract-specific identifiers to ensure traceability and compliance with federal military supply chain requirements. The work encompasses end-to-end preparation of shipments for government delivery, with attention to detail in documentation accuracy and physical marking integrity. The opportunity is a Small Business Set Aside under NAICS code 423830, reserved exclusively for small businesses, and is being managed by the General Services Administration’s Supply Chain Management Contracting Division. Responses are due by August 10, 2026, with performance expected to take place in Kansas City. The contract is structured as a subcontract and is accessible via the SAM.gov portal for interested parties to review full details and submit proposals within the specified timeframe.

General Info

Full-service military packaging and labeling per MIL-STD-129R for small businesses in Kansas City, due August 10, 2026.

Agency

General Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscbView Agency

NAICS

423830 - Industrial Machinery and Equipment Merchant WholesalersView NAICS

Place of Performance

Kansas City, MO, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 09:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeneral Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

ContactsNo contacts available

OfficeN/A

Organization / Agency

General Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Final packaging, labeling, serialization, and shipping documentation for tool kits in compliance with MIL-STD-129R, including barcode generation and marking with AAC, NSN, CAGE, and contract identifiers.

Similar Contracts

Same NAICS industry code

Tools and Test Equipment Supply

Gwinnett County Public Schools

POSTED

about 10 hours ago

DEADLINE

Industrial Cleaning Equipment and Consumables Supply

Base BOSTON(00024)

POSTED

about 13 hours ago

DEADLINE

Replacement Parts Supply and Materials Management

City of Raleigh

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Emergency Generator Supply (Future Construction Phase)

POSTED

DEADLINE

in about 1 month

Support Equipment and Maintenance Supply

POSTED

DEADLINE

in about 1 month

Aircraft Parts and Materials SupplyThe contract entails the supply of all replacement parts, components, and materials necessary for the maintenance and repair of MD530F helicopters, ensuring full operational readiness through comprehensive and reliable sourcing. All items must be provided with full cost documentation and are covered under a warranty that guarantees performance, durability, and compatibility with original equipment standards. The solicitation is issued as a subcontract under the NAICS code 423830, reflecting its alignment with wholesale trade of motor vehicle parts and supplies, and is managed by the County of Kauai in Hawaii. Interested parties must submit responses by the deadline of September 9, 2026, to be considered for award, with no set-aside provisions or special eligibility criteria specified. The place of performance and point of contact details are not provided, but all correspondence and submissions must be directed through the public procurement portal linked in the posting.

County of Kauai

POSTED

DEADLINE

in about 1 month

Recycling Cart/Bin SupplyCamden County Board of Commissioners seeks a subcontractor to supply and deliver recycling carts or bins to enrolled customers in accordance with county specifications, ensuring timely distribution and replacement of any damaged or lost units. The contract requires full compliance with established standards for quantity, durability, and design to support the county’s recycling program effectively, with all deliveries and replacements to be executed seamlessly across service areas. The opportunity is open for submissions until September 17, 2026, and falls under NAICS code 423830 for wholesale trade of durable goods, targeting vendors capable of reliable logistics and customer support at scale.

Camden County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Solid Waste Cart Supply and MaintenanceCamden County Board of Commissioners is seeking a subcontractor to supply, deliver, and maintain 96-gallon rolling carts used for solid waste collection across its service area. The contractor is responsible for providing all necessary units, ensuring timely delivery, and replacing any carts that become damaged, worn, or lost during the term of the agreement. This contract requires ongoing maintenance and replacement services to ensure uninterrupted waste collection operations for residents and facilities. The solicitation is open for responses until September 17, 2026, under the NAICS code 423830 for waste collection and treatment services, and the work is expected to be performed within Georgia. The contract does not specify a set-aside classification, and interested parties can access full details through the provided state procurement portal link.

Camden County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Supply of Conveyor Components & Magnets

Port of Corpus Christi Authority

POSTED

DEADLINE

IFB 26-244-6144 Air Compressors and Install at Satellite Maintenance Facility

Solicitation # IFB-125667

The City of Chesapeake is seeking qualified bidders to supply air compressors and perform their installation at a satellite maintenance facility under solicitation number IFB-125667. This request for proposals is open to vendors who can meet the technical and operational requirements for the equipment and installation services, with all submissions must be submitted through the designated portal by the deadline of August 26, 2026, at 7:00 PM. The contract will be managed as an indefinite delivery/indefinite quantity instrument, allowing for multiple orders over the contract term based on departmental needs. Interested parties should review all specifications and requirements via the provided vendor portal and direct questions to Megan Johnson at the City of Chesapeake, reachable by phone or email. All responses must comply with the solicitation’s terms and conditions, and bidders are expected to demonstrate experience in supplying and installing industrial air compression systems. The place of performance is specifically located in Chesapeake, Virginia, and delivery timelines, warranties, training, and post-installation support will be critical evaluation factors. The solicitation was posted on August 6, 2026, and no set-aside provisions are indicated, meaning all eligible entities may respond. Vendors are encouraged to access the full bid documents and submit proposals electronically through the official vendor platform before the deadline to be considered for award.

City of Chesapeake

POSTED

DEADLINE

Spare Parts Supply and Management

POSTED

DEADLINE

Minority- and Women-Owned Business Participation in Hardware SupplyDallas Area Rapid Transit is seeking participation from certified Minority- and Women-Owned Business Enterprises in the procurement of hardware and related industrial supplies under a subcontract opportunity posted on August 6, 2026, with a response deadline of August 11, 2026. The solicitation encourages the inclusion of MBE, WBE, and DBE suppliers to promote diversity in the supply chain for NAICS code 423830, which covers wholesale trade of hardware and related industrial supplies. While no set-aside designation is specified, active encouragement of certified diverse suppliers is a central requirement, and all participants are expected to demonstrate measurable efforts to engage and integrate these businesses into the procurement process. The place of performance and point of contact details are not provided, but the opportunity is accessible through the DART BonfireHub portal.

Dallas Area Rapid Transit

POSTED

DEADLINE

More opportunities from General Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

Same awarding agency

Quality Assurance & Inspection ServicesThe contract entails comprehensive quality assurance and inspection services for tool kits, requiring full compliance with technical specifications, workmanship standards, and accurate documentation. The scope includes pre-shipment reviews and final acceptance testing to ensure all delivered items meet required quality benchmarks before release. This is a subcontract under a Small Business Set Aside, designated exclusively for small businesses, with the NAICS code 541330 indicating professional, scientific, and technical services related to quality control and inspection. The solicitation was posted by the General Services Administration’s Supply Chain Management Contracting Division, with performance taking place in Kansas City. Responses are due by August 10, 2026, and the opportunity is open to qualified small businesses seeking to support federal supply chain integrity through rigorous inspection and verification processes.

Engineering Services

POSTED

DEADLINE

Precision Machining & Metal Fabrication of Kit ComponentsThe contract calls for the manufacture of precision metal components such as tools, brackets, fasteners, and hardware intended for inclusion in a tool kit, requiring advanced CNC machining and compliance with military workmanship standards. The work includes surface finishing, plating, and other related processes to ensure durability, dimensional accuracy, and functional reliability under demanding operational conditions. All items must meet strict quality benchmarks expected in defense and federal applications, with attention to material specifications, tolerances, and finish consistency. This is a Small Business Set Aside subcontract under NAICS code 332722, reserved exclusively for small businesses, and is managed by the General Services Administration’s Supply Chain Management Contracting Division. Responses are due by August 10, 2026, at 9:00 PM, with the work to be performed in Kansas City. The opportunity was posted on August 6, 2026, and is accessible through the SAM.gov portal, though no specific point of contact is listed. The contract emphasizes domestic production capabilities and adherence to federal procurement guidelines for small business participation.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Tactical Vehicle Tool Kit Manufacturing & AssemblyThe contract requires full manufacturing, assembly, testing, and documentation of two tactical vehicle tool kits in strict accordance with U.S. Army Drawing 57K4590, encompassing all necessary components, packaging, labeling, and adherence to applicable military specifications. The work must be completed to ensure full functionality, durability, and compliance with federal standards for military use. All processes, from production to final inspection, must be meticulously documented and verified to meet required quality controls and traceability protocols. This is a small business set-aside subcontract under NAICS code 332912, reserved exclusively for small business concerns, and is managed by the General Services Administration’s Supply Chain Management Contracting Division. The opportunity was posted on August 6, 2026, with a firm response deadline of August 10, 2026, at 9:00 PM Eastern Time. Performance is expected to be centered in Kansas City, and the contract falls under the broader logistics and equipment support framework of the GSA’s Federal Acquisition Service. Participation requires capability in precision manufacturing, military compliance, and end-to-end supply chain execution for defense-grade tool kits.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

TOOL KIT, DIRECT SUPPORT

Solicitation # 47QSSC26Q6213

The contract is for a Small Business Set Aside solicitation titled TOOL KIT, DIRECT SUPPORT under NSN 5180014998353, requiring exactly two units in accordance with U.S. Army Tank-Automotive and Armaments Command Drawing Number 57K4590. This is a brand name or equal procurement, meaning suppliers may propose equivalent items provided they meet or exceed the specified technical requirements. To qualify for award, all responders must submit both the Request for Quote document and MIL STD 129R completed, signed, and emailed exclusively to desmond.sysengchanh@gsa.gov; failure to submit either document will automatically disqualify the quote without further consideration. The solicitation was posted on August 6, 2026, with a firm deadline for responses set for August 10, 2026, at 9:00 PM Eastern Time. The contract falls under NAICS code 332912 and is managed by the General Services Administration’s Supply Chain Management Contracting Division through its GSA/FAS/GSS/QSCB office located in Washington, DC, with performance to be delivered to Kansas City, Missouri. All inquiries should be directed to primary point of contact Desmond Sysengchanh, reachable by phone at 913-415-5933 or via email.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

NSN 5120-01-334-3162 (LIFTER, BOWL SHELL)

Solicitation # 47QSSC-26-Q-0214

The General Services Administration’s Supply Chain Management Contracting Division is soliciting quotes for two units of the NSN 5120-01-334-3162, a LIFTER, BOWL SHELL, branded exclusively as Alfa Laval Inc. part number 99 137 480, under a commercial item procurement governed by FAR Part 12 and a GSA class deviation. This solicitation, identified as 47QSSC-26-Q-0214, is not a small business set-aside and will be awarded based on the Lowest Price Technically Acceptable (LPTA) method, meaning all administrative and technical compliance requirements must be met before price becomes the sole determining factor. Offers must be submitted electronically via email to erin.ji@gsa.gov by August 11, 2026, and must include a completed RFQ form, a signed MIL-STD-129R form either attached or verified as on file with the InstaQuote Program, and proof of current SAM.gov registration including valid UEI. Offerors must be registered or willing to register with the OMS Vendor Portal or EDI for electronic order receipt. The item must be delivered FOB Destination to Vista, California, with final delivery addresses provided upon purchase order issuance. Packaging must meet GSAM 552.211-75 standards, referencing NMFC or ASTM D-3951, and must preserve each unit to prevent damage during shipment, handling, and storage. All items must be permanently marked with the manufacturer’s part number, name or identifying symbol, and country of origin. Exterior and intermediate packaging must bear the requisition number or TCN, and labeling must comply with MIL-STD-129R for military deliveries and Federal Standard 123 for civilian deliveries, including mandatory machine-readable barcodes containing NSN, CAGE code, contract number, CLIN, and UII/serial numbers where applicable. If hazardous materials are involved, Safety Data Sheets must accompany each transport package, and hazardous material packaging must adhere to GSAM 552.223-73. Wood packaging used for export must be treated and stamped per GSAM 552.211.89. Failure to satisfy any compliance checkpoint—submission completeness, timeliness, documentation, or marking—disqualifies an offeror. Payment will be processed electronically under

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

Brand Name National Stock Numbers: Industry Feedback Request

Solicitation # 47QSSC-25-FH-BRANDNAMERFI

The General Services Administration’s Supply Chain Management Contracting Division is conducting a continuous sources-sought request to gather industry feedback on National Stock Numbers (NSNs) that have been established as brand-name specific, with the intent of evaluating whether the current item purchase descriptions accurately reflect an exclusive need for the named manufacturer and part number or if equivalent alternatives from other suppliers can meet the same operational requirements. These NSNs cover a range of maintenance and repair items such as vacuum bag sealers, acrylic window repair kits, ratchet and spanner wrenches, screwdriver blades, deck grouting powder, mortar mix, thermal insulation, and toilet paper, all of which are currently defined by manufacturer-specific specifications in their corresponding Item Purchase Descriptions. The agency is seeking industry input to confirm whether these brand-name designations are still necessary to ensure interoperability, performance, supportability, and mission readiness, or if competitive substitutes exist that would not introduce unacceptable risk to those critical factors. Responses must be submitted using a designated Excel template with complete information in all required fields, accompanied by supporting manufacturer literature that clearly links each substitute product to the relevant NSN, and must be emailed to fssi.mro-req@gsa.gov with the subject line formatted as “BN NSN Industry Feedback, [Your Vendor or OEM Name].” All feedback must be received no later than February 12, 2027, during which time the agency will review submissions to determine if any brand-name items can be recataloged to allow for broader competition under commercial item acquisition procedures governed by FAR Part 12, GSAR 538.71, and FAR 8.401(b). Award decisions for any resulting contract modifications will be based on a determination of fair and reasonable pricing, using market data, TDR information, and order-level evaluations, with a focus on leveraging existing competition where multiple authorized distributors or resellers are available. The procurement is governed by statutory authority under 10 U.S.C. 3204(a)(1) and 41 U.S.C. 3304(a)(1), and any brand-name justification must comply with FAR 6.104. Supporting documentation referenced includes the Dynamic SCM Brand Name NSN List and related DoD logistics manuals, while the place of performance is identified as Kansas City, Missouri, and the procuring office is located in Washington, DC. No quantities, pricing, or delivery schedules have been specified at this stage, as this is strictly an information-g

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

Container Delivery and On-Site Placement at Naval BasesThe contract requires the transport and precise on-site placement of four 40-yard roll-off containers at Naval Base Coronado and Naval Base North Island, adhering strictly to military base access procedures and logistical protocols. Service providers must navigate secure military environments, follow established entry requirements, and coordinate with base personnel to ensure timely and safe delivery without disrupting operations. The work demands a high level of coordination, reliability, and compliance with federal and defense-specific regulations governing transportation and waste management on active installations. This subcontract falls under NAICS code 484220, which classifies it within the freight transportation industry, specifically heavy and tractor-trailer trucking. Managed by the General Services Administration's Supply Chain Management Contracting Division under the GSA FAS GSS QSCB office, the opportunity was posted on July 28, 2026, and is open to qualified subcontractors meeting the technical and security standards required for military site access. Performance is expected to be completed within the specified locations in Coronado, with no additional state or zip details provided, and contractors must be prepared to operate under stringent base security and scheduling constraints.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Heavy-Duty Roll-Off Container ManufacturingThe contract requires the manufacture and delivery of four 40-yard heavy-duty steel roll-off containers designed to meet stringent military structural and compatibility standards, ensuring seamless operation with Government-owned roll-off trucks. These containers must be built to withstand demanding operational conditions, with specifications tailored to military use, including robust construction, durability under heavy loads, and precise dimensional and functional alignment with existing military equipment. The work is to be completed under a subcontract, with no set-aside provisions specified, and falls under the NAICS code 332420 for fabricated metal product manufacturing. The solicitation was posted on July 28, 2026, by the Supply Chain Management Contracting Division of the General Services Administration under its GSA/FAS/GSS/QSCB office. The place of performance is designated as Coronado, though no specific address or point of contact is provided. The contract is not open for public bid through a public solicitation number, indicating it is likely issued as a downstream subcontract under a larger government procurement framework. All units must be fully compliant with military-grade requirements prior to delivery, and failure to meet structural or compatibility standards will result in rejection.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Commercial Item Subcontracting CoordinationThis contract involves the management of subcontracting activities for commercial items under FAR 52.244-6, requiring strict adherence to federal regulations surrounding subcontractor selection, compliance monitoring, and proper documentation. The contractor must ensure that all applicable federal clauses are accurately flowed down to subcontractors and that all subcontracting arrangements are fully compliant with government standards. The effort is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code 541611 confirms the work scope relates to management consulting services. Performance is required in Galveston, Texas, with the contract administered by the Supply Chain Management Contracting Division within the General Services Administration’s Federal Acquisition Service. The contract emphasizes transparent subcontracting practices and comprehensive recordkeeping to maintain accountability throughout the supply chain.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging, Marking, and Labeling ServicesThe contract requires comprehensive packaging, marking, and labeling services compliant with MIL-STD-129R and ASTM D-3951 standards, ensuring all containers are properly prepared for military logistics and defense supply chains. All levels of packaging must include 2D PDF417 barcodes applied accurately to enable efficient tracking, inventory management, and delivery verification throughout the supply chain. The work is designated as a Total Small Business Set-Aside under the SBA program, meaning only small business concerns certified under the relevant federal guidelines are eligible to bid. The North American Industry Classification System code is 561910, indicating this is for support activities for transportation and logistics services. Performance of the contract is specifically located in Galveston, Texas, with a ZIP code of 77550, and the contracting activity falls under the General Services Administration’s Supply Chain Management Contracting Division within the GSA/FAS/GSS/QSCB office.

Packaging and Labeling Services

POSTED

DEADLINE

Heavy-Duty Rotary Cutter Equipment SupplyThe contract is for the supply of a heavy-duty rotary cutter model Land Pride RCM5020, featuring a 1.5-inch cutting capacity, a durable 10-gauge steel deck, hinged wings for enhanced maneuverability, and a blade tip speed of approximately 18,165 feet per minute. This equipment is designed for demanding land clearing and maintenance applications, ensuring high performance and reliability in rough terrain conditions. The item is being procured under a total small business set-aside designation, which restricts eligibility exclusively to small businesses as defined by the SBA, aiming to promote economic opportunity within the small business community. The solicitation falls under NAICS code 333111, which classifies the manufacturing of agricultural, construction, and mining machinery, and is managed by the General Services Administration’s Supply Chain Management Contracting Division. The place of performance is designated as Galveston, Texas, with a zip code of 77550, indicating where the equipment will be delivered and deployed. Although no specific point of contact or solicitation number is provided, the contract opportunity is publicly accessible via the SAM.gov platform, and it was posted on May 7, 2026, aligning with typical federal procurement timelines for equipment acquisitions within federal agencies.

Farm Machinery and Equipment Manufacturing

POSTED

DEADLINE

Compliance and Certification ManagementThis subcontract opportunity focuses on providing support to the prime contractor in ensuring compliance with key regulatory requirements, specifically related to the Buy American Act, Trade Agreements Act, and anti-trafficking certifications as outlined in FAR and DFARS regulations. The contract falls under the Small Business Administration's Total Small Business Set-Aside program, indicating it is exclusively open to small business entities. The work will be performed primarily at Fort Bliss, with the contracting agency being the Supply Chain Management Contracting Division of the General Services Administration (GSA). The contract is categorized under NAICS code 541611, which pertains to administrative management and general management consulting services. Although the solicitation number and agency office address are not provided, the contract aims to support the prime contractor in navigating complex regulatory frameworks to ensure adherence throughout the supply chain process. The opportunity was posted in late April 2026 and emphasizes the importance of compliance management in government contracting processes, particularly in areas critical to federal procurement policy and ethical standards in labor practices.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE