Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Packaging, Preservation, and Marking Services for Military Shipment

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of military-standard packaging, preservation, and marking services for 92 electrical connector units, ensuring full compliance with defense logistics requirements. All units must be treated with corrosion prevention measures and enclosed in moisture barriers to withstand harsh environmental conditions during storage and transit. Each package must be labeled in strict accordance with MIL-STD-129 standards, including accurate identification markings, barcodes, and hierarchical data to support military supply chain tracking. The work is scoped as a subcontract under the Department of Defense, specifically managed by the ACTIVE DEVICES DIVISION, with performance required at a designated location in San Diego, California, 92136-3581. The solicitation was posted on July 27, 2026, and responses are due by August 11, 2026, with the NAICS code 332992 indicating specialized manufacturing and packaging services for defense applications.

General Info

Pack 92 electrical connectors to MIL-STD-129 standards with corrosion protection and barcoded labeling for DoD delivery in San Diego.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

332992 - Small Arms Ammunition ManufacturingView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide military-standard packaging, preservation, and marking for 92 electrical connector units, including corrosion prevention, moisture barriers, and MIL-STD-129-compliant labeling.

Similar Contracts

Same NAICS industry code

Supply of Federal Premium AmmunitionThe contract calls for the supply of Federal Premium ammunition, specifically HST and Hydra-Shok rounds, designed for both patrol and training use by law enforcement personnel. These rounds must feature controlled expansion and minimal over-penetration to enhance officer safety and reduce the risk of collateral damage in urban and confined environments. The ammunition must meet stringent performance standards to ensure reliability and consistency under field conditions, aligning with tactical and operational requirements. This subcontract is issued by the Florida Department of Highway Safety and Motor Vehicles under NAICS code 332992, with a response deadline of July 31, 2026. The solicitation was posted on July 28, 2026, and is accessible through the Florida vendor marketplace portal. The place of performance and specific delivery locations are not detailed, but the equipment is intended for use across state-level law enforcement operations. There is no set-aside designation, and the contract is open to qualified vendors capable of supplying the specified ammunition in accordance with federal and state procurement guidelines.

Department of Highway Safety and Motor Vehicles

POSTED

DEADLINE

Supply of Speer Law Enforcement AmmunitionThe contract entails the supply of Speer-brand duty and training ammunition specifically designed to meet the Florida Highway Safety and Motor Vehicles Department’s stringent performance standards, focusing on reliable penetration and consistent expansion through various barriers while ensuring predictable ballistic behavior under real-world enforcement conditions. The ammunition must be certified to deliver optimal terminal performance across a range of scenarios encountered by law enforcement personnel, with an emphasis on reliability, accuracy, and safety. Bids for this subcontract are due by July 31, 2026, and are open to eligible suppliers capable of meeting the technical and quantity requirements outlined by the agency. The work falls under NAICS code 332992, indicating it pertains to other fabricated metal product manufacturing, and is tied to operations within Florida. The solicitation is issued through the Florida marketplace platform, with no set-aside provisions specified, meaning competition is open to all qualified vendors regardless of business size or ownership characteristics.

Department of Highway Safety and Motor Vehicles

POSTED

DEADLINE

Reduced-Lead and Frangible Training Ammunition SupplyThe contract involves the supply of environmentally safe training ammunition specifically engineered for indoor firing range use by IRS-CI personnel, with a focus on reduced-lead or frangible designs to minimize environmental and health hazards. The ammunition must meet stringent safety and performance standards suitable for confined training environments, ensuring operational readiness without compromising air quality or facility integrity. This subcontract is categorized as a Small Business Set Aside with no dollar value specified, and it falls under NAICS code 332992, indicating manufacturing of other fabricated metal products. The solicitation was posted on July 28, 2026, with responses due by August 20, 2026, and the performance location is tied to the Department of the Treasury’s Criminal Investigation division, though specific physical details are not provided. The procurement is managed under the Treasury Department and is accessible via the SAM.gov platform.

Criminal Investigation

POSTED

DEADLINE

.223 Rem/5.56 NATO Ammunition SupplyThe contract entails the supply of .223 Remington and 5.56 NATO service and training ammunition in weights ranging from 55 to 64 grains, intended for potential rifle use by IRS-Criminal Investigation personnel. The ammunition must meet military and operational standards suitable for training and service applications, ensuring compatibility with standard-issue firearms used by the agency. This procurement is structured as a subcontract under a Small Business Set Aside designation, exclusively reserved for small businesses, with the NAICS code 332992 indicating classification under Other Miscellaneous Fabricated Metal Product Manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 20, 2026, at 8:30 PM Eastern Time, and is managed by the Department of the Treasury’s Criminal Investigation division. Performance of the contract is expected to support federal law enforcement training activities, though the specific location of use is not detailed. The transaction is accessible through the SAM.gov platform for official documentation and submission.

Criminal Investigation

POSTED

DEADLINE

.40 S&W Training Ammunition SupplyThe contract is for the supply of .40 S&W 180 grain full metal jacket training ammunition specifically designated for use in IRS-Criminal Investigation agent training and qualification programs. It is issued as a subcontract under a Small Business Set Aside, total, meaning only small businesses are eligible to compete, with the NAICS code 332992 indicating the production of other fabricated metal products, which encompasses ammunition manufacturing. The solicitation was posted on July 28, 2026, with a firm response deadline of August 20, 2026, at 8:30 PM Eastern Time. The contracting agency is the Criminal Investigation division of the Department of the Treasury, and while no specific place of performance or point of contact is listed, the ammunition will be used at training facilities managed by IRS-CI agents across the United States. All delivered rounds must meet strict military and law enforcement standards for reliability and consistency to support effective firearms proficiency training.

Criminal Investigation

POSTED

DEADLINE

9mm Training Ammunition SupplyThe contract is for the supply of 9mm 124 grain full metal jacket training ammunition specifically for use by IRS-CI agents in both full-size and compact pistols during qualification and training exercises. It is formatted as a subcontract under a Small Business Set Aside designation, meaning only small businesses are eligible to compete for this opportunity. The North American Industry Classification System code 332992 indicates the work falls under other miscellaneous fabricated metal product manufacturing, typically encompassing ammunition production. The solicitation was posted on July 28, 2026, with a firm deadline for responses set for August 20, 2026, at 8:30 p.m. Eastern Time. The awarding agency is the Criminal Investigation division of the Department of the Treasury, though no specific office address or point of contact is listed. Performance of the contract is expected to support federal law enforcement training needs without specifying a geographic location for delivery.

Criminal Investigation

POSTED

DEADLINE

.40 S&W Service Ammunition ManufacturingThe contract solicits the manufacturing of .40 S&W 180 grain full metal jacket service ammunition specifically tailored for IRS-CI full-size and compact duty pistols, ensuring compatibility and reliability for law enforcement use. It is issued as a subcontract under a Small Business Set Aside, meaning only small businesses are eligible to respond, with the NAICS code 332992 indicating it falls under Other Fabricated Metal Product Manufacturing. The solicitation was posted on July 28, 2026, with a firm response deadline of August 20, 2026, at 8:30 PM Eastern Time, leaving a four-week window for submissions. The contracting entity is the Criminal Investigation division of the Department of the Treasury, which requires high-quality, consistent ammunition to support operational readiness. There is no specified place of performance or point of contact listed, suggesting flexibility in production location and that inquiries may need to be directed through the SAM.gov portal. The ammunition must meet exacting standards for performance in IRS-CI firearms, with an emphasis on safety, reliability, and compliance with federal law enforcement specifications.

Criminal Investigation

POSTED

DEADLINE

9mm Service Ammunition ManufacturingThe contract pertains to the manufacture of 9mm 124 grain +P bonded jacketed hollow point duty ammunition specifically for use by IRS-CI Special Agents in their full-size and compact pistols. The ammunition must meet strict performance standards suitable for law enforcement duty use, ensuring reliability, penetration, and expansion characteristics necessary for officer safety and mission effectiveness. The requirement is designated as a Small Business Set Aside under the SBA program, indicating that only qualifying small businesses are eligible to bid, and the NAICS code 332992 confirms the focus on other fabricated metal product manufacturing, consistent with ammunition production. Submissions must be received by August 20, 2026, at 8:30 PM Eastern Time, following a posting date of July 28, 2026. The contracting activity falls under the Department of the Treasury through its Criminal Investigation division, with no specified place of performance or contact details provided in the data. The contract is classified as a subcontract, suggesting it may be awarded as part of a larger procurement structure. Despite the lack of specific location or point of contact, participation is restricted to small businesses meeting SBA criteria, and bidders are expected to comply with all federal acquisition regulations applicable to defense and law enforcement ammunition contracts.

Criminal Investigation

POSTED

DEADLINE

Solicitation # 2023H2-26-Q-00040

The contract is for ammunition under solicitation number 2023H2-26-Q-00040, issued by the Criminal Investigation office within the Department of the Treasury, located in Washington, DC, with a mailing address of 20224. It is a Small Business Set Aside, meaning only small businesses are eligible to compete, and the award will be made as a total set-aside. The NAICS code 332992 identifies the industry category for other fabricated metal product manufacturing, indicating the scope involves the production of ammunition. The solicitation was posted on July 28, 2026, and responses are due by August 20, 2026, at 8:30 PM Eastern Time. The only point of contact provided is Jose Munoz, reachable by phone at 9496387496 or email at jose.r.munozjr@irs.gov. The place of performance is not specified, and the solicitation is classified as a combined action, suggesting it may integrate acquisition methods or serve multiple purposes under one notice. All further details are contained within the attached solicitation document, which must be reviewed for full compliance and submission requirements.

Criminal Investigation

POSTED

DEADLINE

Precision Ball Bearing ManufacturingThe contract calls for the manufacture of a precision annular ball bearing featuring a 17mm bore and a 40mm outer diameter, produced to ABEC 1 tolerance standards with a steel shield for environmental protection and specified lubrication that meets military performance requirements. The product must adhere to stringent durability and operational standards expected in defense applications, ensuring consistent performance under demanding conditions. This is a subcontract opportunity posted by the ASC COMMODITIES DIVISION under the Department of Defense, with the NAICS code 332992 indicating classification within other fabricated metal product manufacturing. Responses are due by August 4, 2026, and the place of performance is designated as FPO with a zip code of 96607, indicating possible deployment or overseas logistics coordination. The solicitation was posted on July 27, 2026, and is accessible through the DIBBS system, suggesting it is routed through Defense Logistics Agency procurement channels. The contract does not specify a set-aside category, meaning it is open to general industry participation, but compliance with military-grade specifications and delivery timelines are critical for qualification and award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Hardware Manufacturing – Stiffener ComponentThe contract calls for the manufacture of six units of a stiffener component identified by NSN 1680LN0027577, requiring full compliance with military specifications for quality, packaging, and labeling standards. The work is to be performed under a subcontract arrangement, with performance concentrated at the designated location in Jacksonville, Florida, zip code 32212-0103. The project is solicited by the DLA Fleet Readiness Center Southeast, a Defense Department agency, and falls under the NAICS code 332992 for other fabricated metal product manufacturing. All deliverables must meet strict defense-grade requirements to ensure operational suitability and logistical compatibility. The solicitation was posted on July 27, 2026, with a firm response deadline of August 4, 2026. While no set-aside classification or point of contact details are provided, the contract is accessible through the DIBBS portal using the referenced URL. Bidders must ensure their proposals align with the military standards applicable to component fabrication, packaging protocols, and label formatting without deviation. Timely submission and strict adherence to technical specifications are critical for consideration, as failure to comply could result in disqualification regardless of pricing or capacity.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

Manufacture of Transfer Unit, Ammunition (NSN: 1005-01-391-5096)The contract mandates the full manufacturing, assembly, and delivery of a single defense-specific transfer unit identified by NSN 1005-01-391-5096, adhering strictly to ITAR regulations, MIL-STD-129 labeling standards, and DLA procedural requirements. All components and processes must utilize newly sourced materials and be executed through approved CAGE code-certified manufacturing methods to ensure compliance with defense-grade quality and traceability. The unit is intended for use within the Department of Defense's land supply chain and must be delivered to the designated performance location in New Cumberland, Pennsylvania, with ZIP code 17070-5002. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, as defined by FAR 19.5, and is classified under NAICS code 332992 for Other Miscellaneous Fabricated Product Manufacturing. The opportunity was posted on July 27, 2026, with a firm response deadline of August 6, 2026, and is accessible via the DIBBS platform under solicitation reference SPE7L126Q1374.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Solicitation # SPE7M5-26-T-358D

The contract pertains to the procurement of solid-state transistors identified by NSN 5961-00-146-2443 and part number 1582938-1, sourced from approved suppliers including Honeywell International, Solid State Devices, Silicon Transistor Corp, and Microsemi Corp. The item is classified as a qualified item under Federal Supply Class 5961, requiring compliance with the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List, and adherence to procurement note M01 for qualification standards. Technical and quality requirements are governed by the DLA Master List, with revisions based on solicitation or award dates depending on acquisition size. The item must meet the specifications of technical data SPE7M5-26-T-358D, even though the referenced section is incomplete. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise stipulated. Critical attributes are verified at level VII with an AQL of 0.1, and unspecified attributes are treated as major. The contract prohibits the use of Class I ozone-depleting substances in any phase of manufacturing or processing unless explicitly approved in writing by the contracting officer. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03. Packaging must conform to MIL-STD-2073-1E and marking must comply with MIL-STD-129, including specific lead finish labeling per IPC/JEDEC J-STD-609. The item is designated as a critical application item with no quantity variance allowed. Delivery is required FOB origin within 56 days to Hill Air Force Base, Utah, with inspection and acceptance occurring at the destination. The unit of issue is each, with a contract value of $15.00 per unit for a total of 15 units.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

BACKSHELL, ELECTRICAL C

Solicitation # SPE7M5-26-Q-0787

This contract specifies the procurement of 14 electrical connector backsheets identified by NSN 5935-01-385-1947, with a firm fixed price and no variance allowed in quantity. The item is classified as a qualified product requiring compliance with the Qualified Products List (QPL) for connector assemblies and electrical contacts under Procurement Note H01, and any components within the assembly must also originate from sources listed on the applicable QPL or Qualified Manufacturers List (QML). The product must conform to SAE AS85049F Revision F and SAE AS85049/25C Revision C standards, and is designated as a critical application item. All materials must exclude intentional addition of mercury or mercury-containing compounds except in explicitly permitted applications such as batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury-containing devices requiring double containment. The use of Class I ozone-depleting substances is strictly prohibited in manufacturing, cleaning, or testing without prior written approval from the contracting officer. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively, with no special marking required. Inspection and acceptance occur at the destination, and the item must be delivered within 80 days of award, shipped FOB origin. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation logistics governed by DLAD procedural notes.

Electronic Connector Manufacturing

POSTED

DEADLINE

BACKSHELL, ELECTRICAL C

Solicitation # SPE7M5-26-Q-0785

This contract specifies the procurement of a backsheel electrical connector assembly with NSN 5935-01-385-1947, quantity of 17 units, under solicitation SPE7M5-26-Q-0785, with delivery required within 80 days of award. The item is classified as a critical application and must comply strictly with SAE AS85049/25C and SAE AS85049F technical standards, and is subject to Qualified Products List (QPL) and Qualified Manufacturers List (QML) requirements, meaning all components must originate exclusively from sources listed on the official DLA-maintained QPL/QML. The supplier must ensure no intentional addition of mercury or mercury-containing compounds, except in permitted functional applications such as batteries or instruments, and portable devices with mercury must include double containment per NAVSEA 5100-003D. Use of Class I ozone-depleting substances is prohibited in any phase of manufacture, testing, or cleaning unless explicitly authorized in writing by the contracting officer. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and shipment must occur via traceable means excluding parcel post to the designated Carderock Division address in Bethesda, Maryland. Inspection and acceptance occur at destination under a firm fixed price with zero variance allowed in quantity. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero nonconformances permitted unless otherwise contracted, and critical, major, and minor attributes are assigned specific verification levels or AQLs. The supplier acknowledges full compliance with all DLA packaging, quality, and environmental requirements integrated via referenced technical and quality documents from the DLA Master List, and the item is designated for government use with delivery scheduled for June 25, 2026.

Electronic Connector Manufacturing

POSTED

DEADLINE

FUSE, CARTRIDGE

Solicitation # SPE7M5-26-T-357E

The contract is for the procurement of three fuse cartridges identified by NSN 5920-01-431-5562 and part number 071489, supplied by Dover Corp Groen Div. Delivery is required within 20 days FOB destination with zero variance allowed in quantity, and inspection and acceptance occur upon arrival at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and marking aligned with MIL-STD-129, with no special marking required. Mercury or mercury-containing compounds are strictly prohibited unless functionally embedded in approved devices like batteries, fluorescent lamps, sensors, or weapon systems, and portable mercury-containing items must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The delivery address is the USNS PILILAAU T AKR 304 at FPO AP 96675, and transportation procedures follow DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7M5-26-T-357E with a required delivery date of July 27, 2026, and is governed by technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issuance date. The NAICS code is 334220, and the contracting activity is the Department of Defense’s Active Devices Division, with Matthew Stanko listed as the primary point of contact.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

CONTACT ASSEMBLY, EL

Solicitation # SPE7M5-26-T-357Q

The contract pertains to the procurement of one unit of a contact assembly identified by NSN 5999-01-453-2144 and part number W40 under solicitation SPE7M5-26-T-357Q, with a required delivery within 20 days of award. Delivery is FOB destination, with inspection and acceptance occurring at the destination, and no variance is permitted in quantity. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951, and must adhere to MIL-STD-129 for labeling and marking. If the item is classified as hazardous under FED-STD-313, it must be packaged per TQ requirement IP025; otherwise, it must be commercially packaged in accordance with ASTM D3951 while still complying with all DLA packaging mandates. Palletization must follow RP001 guidelines, and all government identification must be removed from non-accepted supplies as per RQ011, with physical identification of bare items governed by RQ017. The delivery destination is USNS PILILAAU T AKR 304 in FPO AP 96675, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The contract includes a required delivery date of July 27, 2026, and the solicitation was posted July 29, 2026, with responses due by August 10, 2026, under a NAICS code of 335931. All vendor interactions require use of the VSM system, and government-use-only fields include specific codes for identification, distribution, and fulfillment.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

CONNECTOR, PLUG, ELEC

Solicitation # SPE7M5-26-Q-0794

The contract specifies the procurement of 23 electrical plug connectors identified by NSN 5935-01-615-4375, with a firm fixed price and zero variance allowed in quantity. The item must comply with MIL-DTL-38999/26G and MIL-DTL-38999N specifications, and is subject to qualification requirements under the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. All supplies must adhere to DLA packaging standards, including MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for labeling, with no special marking required. The item must be physically marked in accordance with RQ017, and government identification must be removed from non-accepted supplies per RQ011. Delivery is required at the DLA Distribution center in New Cumberland, Pennsylvania, within 100 days after award, with inspection and acceptance occurring at destination. Transportation and shipping instructions follow DLA procedural notes C19 and C20. The contract was issued under solicitation SPE7M5-26-Q-0794 with a response deadline of August 6, 2026, and the material is needed for delivery no later than February 7, 2027.

Electronic Connector Manufacturing

POSTED

DEADLINE

BRACKET, ELECTRICAL

Solicitation # SPE7M5-26-Q-0783

The contract pertains to the procurement of a single electrical bracket identified by NSN 5935-01-664-4142, with delivery required within 90 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. Configuration change management for materials related to the Edgewood Chemical Biological Center is subject to formal variance requests. Physical identification of the item must follow specified marking standards. The bracket incorporates technical data subject to U.S. export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed DLA’s mandatory training and questionnaire and received formal approval. The solicitation, issued under number SPE7M5-26-Q-0783, was posted on July 29, 2026, with responses due by August 13, 2026, and performance is designated for Starke, Florida, 32091-9794. The contracting office is the Department of Defense’s Active Devices Division, with Barbara Hoffmann as the primary point of contact.

Electronic Connector Manufacturing

POSTED

DEADLINE

CONNECTOR, RECEPTACLE, E

Solicitation # SPE7M5-26-Q-0784

This contract is for the procurement of 13 electrical receptacle connectors identified by NSN 5935-01-710-7039 under solicitation SPE7M5-26-Q-0784, with a firm fixed price and no variance allowed in quantity. The item must comply with MIL-DTL-38999N Rev N and MIL-DTL-38999/24J Rev J technical specifications, and is subject to the Qualified Products List (QPL) requirements under procurement note H01 for Federal Stock Class 5935. The use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited without prior written approval from the Contracting Officer, although this restriction does not apply to commercial items as defined by FAR 11.001 or part-numbered-only items. All packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 and no special marking code required. The item must be delivered within 150 days after the award date to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The contract specifies origin FOB terms and includes detailed transportation instructions referencing DLAD Proc Notes C19 and C20. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. The item is listed on the QPL or QML, making qualification compliance mandatory, and engineering change proposals or deviations require formal requests under RQ002. The contract is managed by the Department of Defense’s Active Devices Division, with the point of contact being Tate Shannon.

Electronic Connector Manufacturing

POSTED

DEADLINE

MICROCIRCUIT, DIGITAL

Solicitation # SPE7M5-26-T-358C

This contract is for the procurement of a digital microcircuit identified by NSN 5962010245938 and part number GEM45621BCA under Federal Supply Class 5962, with a total quantity of 28 units at a unit price of $28.00. The item is classified as a commercial item and requires strict adherence to DLA technical and quality requirements, including supply chain traceability documentation as mandated by DLA Procurement Note C03 (Aug 2016). The contractor must maintain and submit comprehensive traceability and test records, which must be emailed to the designated DLA address no later than 15 days before delivery, with each submission limited to under 15 megabytes and properly labeled using a prescribed naming convention. Delivery is FOB origin with inspection and acceptance occurring at destination after written authorization from the contract administrator; shipment without this approval renders payment non-final. The microcircuit must be marked per IPC/JEDEC J-STD-609 for lead finish identification and labeled in compliance with MIL-STD-129, with unit packaging containing the completed DLA Land and Maritime Form 918 and shipment authorization confirmation. Strict ESD and EMI protective packaging per MIL-PRF-81705 is required, using qualified materials from approved manufacturers on QPL-81705, and cushioning must meet A-A-59136 Class 1 Grade B density standards with thickness sufficient to prevent lead damage. The item is subject to a zero-defect sampling plan under MIL-STD-1916 or equivalent, and the contractor must comply with DLA packaging, preservation, and palletization standards. Mercury and mercury compounds are prohibited in or on the item except for specified exempted applications. The supplier must retain all supply chain documentation for the duration of the contract and adhere to CMMC Level 2 cybersecurity self-assessment requirements. The delivery deadline is 164 days from contract award, with the original required delivery date set for May 10, 2027.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M5-26-T-357P

The contract is for the procurement of eight antennas with NSN/part number 5985-99-671-2175 under solicitation SPE7M5-26-T-357P, issued by the Department of Defense’s Active Devices Division. The requirement is governed by DLA packaging and technical quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions. Deliverables must be shipped within 225 days after contract award, and the place of performance is designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The offeror must submit a complete data package covering both the approved part and any alternate part, and the government’s identification must be removed from non-accepted supplies. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the North American Industry Classification System code is 334220. Primary points of contact include Matthew Stanko, reachable via email fmtewiq@dla.mil or phone 3128507245, with additional details accessible through the DIBBS portal linked in the contract data.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

HEAT SINK-INSULATOR

Solicitation # SPE7M5-26-Q-0792

The contract pertains to the procurement of a single unit of a heat sink-insulator, identified by NSN 5999-33-208-8134, under solicitation SPE7M5-26-Q-0792, with a firm fixed price and no tolerance for quantity variance. Delivery is required within 90 days after award, with the shipment destined to FPO AA 34092 aboard the USS NEW YORK LPD 21, and must be sent via the fastest traceable freight method, explicitly prohibiting parcel post. The item must be packaged in strict compliance with MIL-STD-2073-1E, including packaging method 31, drying and preservation standards, and labeling per MIL-STD-129 with no special marking required, while palletization follows DLA’s packaging guidelines. The specification references technical and quality requirements from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and designates the product as a critical application item. Multiple vendor part numbers are accepted, including those from CONSILIUM MARINE & SAFETY AB, CONSILIUM MARINE US INC, and L3 MAPPS LTD. The contract is issued under the DoD’s authorized unit of issue, with the purchase request number 7017613294 and a required ship date of May 21, 2026.

Other Electronic Component Manufacturing

POSTED

DEADLINE

ELECTRONIC MODULE, S

Solicitation # SPE7M5-26-T-357R

The contract pertains to the procurement of three electronic modules, identified by NSN 5963-20-001-8264 and part number 843-05, manufactured by Pivotal Power Inc, with delivery required within 84 days of contract award, FOB origin. The item is designated as an ESD-sensitive electronic device and must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including specialized ESD and EMI protective materials per MIL-PRF-81705, requiring Type I barrier material for both ESD and EMI protection, with the supplier responsible for ensuring all packaging materials originate from qualified manufacturers listed on QPL-81705. Packaging must include adequate cushioning to prevent damage to pins and leads, and must be palletized according to DLA packaging standards RP001, with special marking code 39 indicating ESD sensitivity. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the delivery point. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 334418, with a contract value of $9.00 for three units at $3.00 each, and the original required delivery date is May 3, 2027, with a need ship date of November 3, 2026. Compliance with all technical and quality requirements referenced in the DLA Master List is mandatory, governed by the revision in effect on the solicitation issue date.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE