Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PACKING, PREFORMED

Active
SPE7L3-26-T-179TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of five preformed packing units under NSN 5330-01-231-7473. The contract requires delivery within 157 days after the order is placed. Performance is designated for Tracy, California, and the procurement falls under NAICS code 339991. The contract mandates strict adherence to DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies. There are stringent environmental prohibitions against the intentional use of mercury, class I ozone-depleting chemicals, and asbestos, with specific exceptions only for functional mercury in approved components. Any substitute chemicals or alternative materials must be submitted for official approval.

General Info

DoD procurement of five preformed packing units for delivery to Tracy, California.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-179T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUSA
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PACKING,PREFORMED
PACKING,PREFORMED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-01-231-7473 Quantity: 5 EA Purchase Request: 7017870359QTY: 5 Delivery: 157 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-179X
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 58 gaskets under part number 5330-01-534-4874. The contract requires delivery within 148 days after the order is placed and is associated with NAICS code 339991. Performance is designated for Tracy, California. A critical component of this contract is the strict adherence to export control regulations, as the technical data is subject to ITAR or EAR restrictions. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the required Department of Defense training and questionnaires. Additionally, all shipments must comply with DLA packaging requirements for procurement.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE4A1-26-T-2577
This contract is for the procurement of four special shaped nonmetallic seals, identified by NSN 5330015296802 and Sikorsky part number 70209-52426-131. The items are designated as critical application components and must be delivered within 20 days after the order. The contract specifies a maximum shelf life of 12 months in accordance with ASTM D6576 and strictly prohibits the use of asbestos. Key requirements include strict adherence to DLA packaging and marking standards, specifically requiring the use of medium duty, waterproof, greaseproof, and opaque bags to protect the items from ultraviolet rays. The contractor must maintain supply chain traceability documentation and follow specific sampling plans that meet or exceed ASQ H1331 or MIL-STD-1916. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination in Fort Rucker, Alabama.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC RO
Solicitation # SPE7L1-26-T-967A
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of one nonmetallic Teflon seal under NSN 5330-00-860-0577. The contract requires delivery within five days after the order is placed and specifies that the item must adhere to DLA packaging requirements. The place of performance is located in Little Falls, Minnesota. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires required by the Defense Logistics Agency.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL RING, METAL
Solicitation # SPE7L4-26-U-1094
This solicitation from the Department of Defense, specifically the LSO Combat Vehicles and Armament agency, is for the procurement of 47 metal seal rings under solicitation number SPE7L4-26-U-1094. The items are identified by NSN 5330-01-265-0523 and part number 230-03-070-7026 from Renold, Inc. The contract is designated as a Total Small Business Set-Aside under NAICS code 339991, with a required delivery timeframe of 97 days after the order is placed. The procurement is subject to strict technical and quality standards, including DLA packaging requirements and the removal of government identification from non-accepted supplies. Material restrictions are explicitly stated, prohibiting the use of asbestos as defined in FED-STD-313 and the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions as outlined by NAVSEA. All technical and quality requirements are governed by the DLA Master List effective on the solicitation or award date.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-337S
This contract is for the procurement of O-rings under NSN 5331001651956, identified as critical application commercial items. The requirement is split across three delivery locations, including Tinker AFB, New Cumberland, and San Joaquin, with total quantities spanning 53, 2,506, and 3,397 units respectively. The manufacturer must be QPL approved at the time of award and adhere to SAE AS3209C and SAE AMS7276J standards. Delivery is required within 84 days, with specific need ship dates extending through 2028. Strict quality and material constraints apply, including a total prohibition of asbestos and the intentional addition of mercury. The items must meet NAVAIR aircraft launch and recovery equipment traceability requirements and be marked with the contract number, NAWC CAGE, and part number. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 to protect against ultraviolet ray deterioration using opaque, waterproof, and greaseproof bags. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916 or ASQ H1331.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-968A
This solicitation, issued by the Department of Defense Land Supply Chain agency, is for the procurement of 18 O-rings under NSN 5331-01-098-3825. The contract requires delivery within 35 days after the order is placed, with the place of performance located at Hill AFB. The solicitation number is SPE7L1-26-T-968A, and it falls under NAICS code 339991. The contract is subject to several strict technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Notably, the project requires Cybersecurity Maturity Model Certification Level 2 and involves technical data subject to ITAR or EAR export controls. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-337T
This solicitation, issued by the Department of Defense Fluid Handling Division, seeks the procurement of 1,301 O-rings under NSN 5331-00-252-6047. The contract is open for full and open competition with a delivery requirement of 12 days after the order is received. All items must be manufactured according to current military or consensus non-government part standards and must be entirely free of asbestos. Compliance is required with DLA packaging and quality requirements, including specific sampling methods such as MIL-STD-1916 or ASQ H1331. The procurement emphasizes that any hardware produced from the date of solicitation must adhere to the most current revision of the applicable part standard. Quality assurance involves strict verification levels for critical, major, and minor attributes to ensure all supplied components meet federal specifications.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-967N
This contract is a solicitation issued by the Department of Defense Land Supply Chain for the procurement of nine gaskets, identified by NSN 5330-01-714-2809 and part number PG775000-31. The agreement specifies a delivery timeline of 20 days after order, with the original required delivery date set for August 11, 2026. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination in Westhampton Beach, New York. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards and MIL-STD-129 for marking. Because the items are susceptible to ultraviolet ray deterioration, they must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Shipments must be sent via the fastest traceable means to the specified address, and the contractor must comply with regulations regarding the removal of government identification from non-accepted supplies and the handling of covered defense information.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPLACE
Solicitation # SPE7L3-26-T-174Y
This contract is for the procurement of five seal replacement parts kits for mechanical equipment under solicitation number SPE7L3-26-T-174Y. The items are identified by NSN 5330-00-886-5843 and must adhere to specific technical drawings and quality requirements, including the use of ASTM-D2000 instead of MIL-R-3065. A critical requirement is that the items must contain no asbestos and are classified as Type I items with a non-extendable shelf life of 36 months. Delivery is required within 190 days to the DLA Distribution New Cumberland facility in Pennsylvania, with a required delivery date of March 3, 2027. The contract mandates strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1, and requires the use of waterproof, greaseproof, opaque bags to protect the materials from ultraviolet rays. Inspection and acceptance will take place at the destination, with shipping terms set as FOB Origin.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L3-26-T-179U
This solicitation is for the procurement of four plain encased seals, identified by NSN 5330-00-947-0077, with a delivery requirement of 362 days after order. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must disclose any non-domestic materials to comply with the Berry Amendment and Buy American Act. The solicitation prohibits the use of additive manufacturing unless specifically authorized and requires a representation that no covered telecommunications equipment or services will be provided. Contractors must be aware of upcoming changes to the Vendor Shipment Module, which will soon require registration via the Account Management and Provisioning System for access and shipping. Small business joint ventures are required to submit specific representations and certifications. Those unable to quote by the deadline should submit a No Bid response with an anticipated quote date to maintain communication with the buyer.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-967G
This contract is for the procurement of one O-ring, identified by NSN 6515-01-536-3302 and part number AH179 from Gast Manufacturing Co. The agreement specifies a delivery timeline of 20 days with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The item is to be delivered to the US Army AWCF SSF at Fort Campbell, Kentucky, with a required delivery date of August 11, 2026. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Additionally, any wood packaging material used must comply with clause 52.247-9012 regarding heat treatment or kiln-drying to meet Department of Defense standards.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING ASSEMBLY
Solicitation # SPE7M4-26-T-337L
This solicitation is for the procurement of 562 packing assemblies under NSN 5330-01-381-4830 for the Department of Defense Fluid Handling Division. The contract is a total small business set-aside with a delivery requirement of 536 days after order. Performance will take place at Robins Air Force Base, and the response deadline for solicitation SPE7M4-26-T-337L is August 24, 2026. Compliance requirements include adherence to DLA packaging standards and CMMC Level 2 certification via a certified third-party assessment organization. Additionally, the contract involves technical data subject to ITAR or EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires to gain access to the data.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L3-26-T-179S
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 10 vehicular component brackets under NSN 2510-01-734-9575. The contract is open for full and open competition with a delivery requirement of 173 days after the order is placed. Performance is centered in New Cumberland, Pennsylvania, and the procurement falls under NAICS code 332999. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a Third-Party Assessment Organization. The contractor must adhere to DLA master technical and quality requirements, specific packaging standards, and regulations regarding the removal of government identification from non-accepted supplies. Additionally, the project involves technical data subject to ITAR or EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification and complete mandatory export-control training.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L3-26-T-179V
This contract is a solicitation issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of nine access covers, identified by NSN 2590-01-700-1131 and part number WLGF from Cooper Crouse-Hinds LLC. The agreement specifies a delivery timeline of 14 days after order, with a required delivery date of September 18, 2026. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, specifically citing packaging standards ASTM D3951 and MIL-STD-129, as well as palletization requirements under RP001. A critical environmental restriction prohibits the use of Class I ozone-depleting chemicals in any delivered items, requiring approved substitutes if necessary. The solicitation is managed under NAICS code 333310 and is overseen by primary point of contact Jennifer Taylor.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
SEAT, VEHICULAR
Solicitation # SPE7L3-26-T-180E
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 88 vehicular seats under NSN 2540-00-560-2169. The contract is designated as a total small business set-aside under NAICS code 336360, with a delivery requirement of 199 days after the order is placed. Performance is centered in New Cumberland, Pennsylvania, and the response deadline for the solicitation is August 24, 2026. The contract carries strict security and regulatory requirements, including the necessity for Cybersecurity Maturity Model Certification Level 2 via a certified third-party assessment organization. Additionally, the project involves covered defense information and technical data subject to ITAR or EAR export controls. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires required by the Defense Logistics Agency.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
DRIVE SHAFT ASSEMBL
Solicitation # SPE7L3-26-T-179W
This contract is for the procurement of one drive shaft assembly, identified as a commercial off the shelf critical application item with part number AUC13729 for John Deere tractor works. The order is managed under solicitation SPE7L3-26-T-179W with NSN 2520-01-733-9918. Delivery is required within 20 days, with the final destination being the Amphibious Construction Battalion 1 in San Diego, California. The agreement mandates strict adherence to DLA technical and quality requirements, specifically regarding packaging, marking, and the removal of government identification from non-accepted supplies. Environmental restrictions prohibit the use of Class I ozone depleting chemicals and the intentional addition of mercury, except in specific authorized functional components. Shipping must be conducted via the fastest traceable means, excluding parcel post, and must comply with MIL-STD-129 and MIL-STD-2073-1E standards.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336211
New
DIBBS
EXTENSION, FENDER, VE
Solicitation # SPE7L3-26-T-179Y
This contract is a solicitation for the procurement of 21 vehicular fender extensions under solicitation number SPE7L3-26-T-179Y. The items are identified by NSN 2510-00-757-2750 and must adhere to specific technical drawings and quality requirements, including TDP Rev A Gen 6. The contract specifies a delivery timeline of 172 days after order, with a required delivery date of February 13, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Compliance requirements include adherence to DLA packaging standards, MIL-STD-129 labeling, and ASTM D3951 packaging. The contract strictly prohibits the use of Class I ozone-depleting chemicals and mandates Cybersecurity Maturity Model Certification Level 2 self-assessment. It is designated as a critical application item, requiring strict configuration change management and adherence to the DLA Master List of Technical and Quality Requirements.
Motor Vehicle Body Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336411
New
DIBBS
ACCUMULATOR, PNEUMAT
Solicitation # SPE7L3-26-T-180C
This contract is a solicitation for eight pneumatic pressure accumulators used on the Band 9/10 transmitter for EA-6B Prowler aircraft. The components must be manufactured from corrosion resistant steel with a nominal overall length of 7.590 inches and a nominal diameter of 4.000 inches. Technical specifications require UNJF-3A port screw threads with a 0.250 inch nominal diameter and 20 threads per inch. This is a restricted source item that requires engineering source approval by the government design control activity, and the use of Class I ozone depleting chemicals is strictly prohibited. Compliance requirements include CMMC Level 2 certification and adherence to Covered Defense Information and export control regulations under ITAR or EAR. Contractors must have an approved US/Canada Joint Certification Program certification to access technical data. The procurement is managed by the Defense Logistics Agency with a delivery timeline of 512 days after order. Additional quality and technical requirements are governed by the DLA Master List, including specific packaging, configuration change management, and inspection protocols at the point of origin.
Aircraft Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL ASSEMBLY
Solicitation # SPE7L3-26-U-0687
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 68 seal assemblies under NSN 5330-01-155-9331. The contract is designated as a total small business set-aside under NAICS code 339991. Delivery is required within 97 days after the order is placed. The procurement is subject to specific technical and quality requirements, including DLA packaging standards and the mandatory removal of government identification from any non-accepted supplies. Additionally, the items must be free of asbestos as defined by FED-STD-313. Interested parties must respond by August 28, 2026, regarding solicitation number SPE7L3-26-U-0687.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-179Z
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of one gasket under National Stock Number 5330-01-511-7089. The contract is classified as a commercial item and requires delivery within 20 days after receipt of the order. The place of performance is designated as FPO, zip code 96678. Compliance with several technical and quality standards is mandatory, including MIL-STD-130N for identification marking and specific DLA packaging requirements. The item must be free of asbestos and must be packaged in a medium duty, waterproof, greaseproof, opaque bag according to MIL-DTL-117 to prevent deterioration from ultraviolet rays. All supplies must adhere to the DLA Master List of Technical and Quality Requirements and regulations regarding covered defense information.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE7L3-26-T-180A
This solicitation from the Department of Defense, specifically the Land Supplier Opns Vehicle Spt agency, is for the procurement of one connecting link for a rig under part number 3040-01-645-8703. The contract requires delivery within 10 days after receipt of the order and is subject to full and open competition. Performance is located in Charlotte, North Carolina, with a response deadline of August 24, 2026. The contract is governed by several strict technical and quality requirements, including DLA packaging standards, cybersecurity maturity model certification level 2, and specific protocols for configuration change management. Notably, the item contains technical data subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details