Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PACKING, PREFORMED

Active
SPE7M2-26-T-6193Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two units of preformed packing with part number 695-00014, sourced from HAGGLUNDS DENISON CORP in MARYSVILLE OH, under NSN 5330-01-274-3262 and purchase request 7017702770, with a delivery requirement of 20 days after award. The solicitation number is SPE7M2-26-T-6193, issued on August 10, 2026, with responses due by August 21, 2026, and is classified under NAICS code 339991 for other miscellaneous manufacturing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and compliance is mandatory for all provisions referenced by R or I numbers. The item must adhere to NAVAIR aircraft launch and recovery equipment traceability standards, and bare parts must be marked with the contract number, NAWC CAGE, and part number unless a conflicting drawing specification applies, in which case the drawing takes precedence. The packing must be free of intentional mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or Navsea-specified reagents; portable devices containing mercury must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all materials must meet DLA packaging requirements for procurement. The point of contact is Alisha Blanton, reachable via email and phone, with the place of performance listed as Washington DC.

General Info

Procure two 695-00014 packings from HAGGLUNDS DENISON, deliver in 20 days, meet NAVSEA and DLA standards, no mercury except exempt uses.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

5130 MACARTHUR BOULEVARD NW, WASHINGTON DC, DC, 20016-3344, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-6193 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PACKING,PREFORMED
PACKING, PREFORMED
HAGGLUNDS DENISON CORP (9F512)
MARYSVILLE OH
P/N 695-00014
NO DRAWING AVAILABLE
FOR COMPETITIVE PROCUREMENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH &
RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE
ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA
DRAWINGS PROVIDED.
BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT
NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE
SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT
EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE
ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.
ADEQUATE DATA FOR NSN/Part Number: 5330-01-274-3262 Quantity: 2 EA Purchase Request: 7017702770QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L0-26-Q-0297
The contract is for the supply of 720 units of a gasket identified by NSN 5330-01-207-6449, with a delivery requirement within 120 days after award. The item must be free of asbestos, and any alternative material or substitution must be formally approved under Clause L30 and Provision 4 conditions. Technical and quality standards referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a subsequent amendment supersedes it. The solicitation number is SPE7L0-26-Q-0297, posted on August 10, 2026, with responses due by August 24, 2026. The contracting activity is under the Department of Defense, specifically the Land Supply Chain ESOC Buys office, with point of contact Kylie Proskurenko reachable via email and phone. The purchase request number is 7017674860, and all supplies must be delivered without any government identification markings if rejected. The procurement is administered through the DIBBS system, with the official solicitation page accessible via the provided URL.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M2-26-Q-0733
This contract pertains to the procurement of a restricted-source item identified by NSN 5330-00-786-5492, with a quantity of 14 units, under solicitation SPE7M2-26-Q-0733. The item requires engineering source approval by the government design control activity and must comply with stringent packaging, documentation, and traceability standards set forth in DLA’s Master List of Technical and Quality Requirements. All supplies must adhere to prohibitions against ozone-depleting chemicals and intentional use of mercury or mercury-containing compounds, except for specific functional applications like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemically specified reagents approved by NAVSEA; portable mercury-containing items must also meet shock-proof and dual-containment standards per NAVSEA 5100-003D. Item markings must include the contract number, NAWC CAGE code, and part number unless overridden by technical drawings, and all bare items must conform to NAVAIR aircraft launch and recovery equipment traceability requirements. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized DLA approval may access this data. Manufacturing and non-manufacturing entities must hold SAE AS9100 accreditation and meet non-destructive testing (NDT) accreditation requirements. Submission of a First Article Testing Report, Production Test and Inspection Report, and Certificate of Quality Compliance is mandatory, with surplus materials deemed unacceptable. Delivery is due 449 days after award, and all technical data and requirements are governed by the solicitation version in effect on the issue date, with updates controlled by any subsequent amendments. The place of performance is San Diego, CA, with Victoria Payne at DLA as the point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC ST
Solicitation # SPE7L1-26-T-949M
The contract specifies the procurement of four nonmetallic strip seals identified by NSN 5330-01-649-5588 under solicitation SPE7L1-26-T-949M, with a required delivery within five days after order. The item is classified as a commercial item and must be free of asbestos, with any alternative materials requiring approval per Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item is subject to MIL-STD-130N for identification marking of U.S. military property and covered defense information protocols. The place of performance is Anniston, Alabama, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-328M
The contract specifies the procurement of a synthetic rubber gasket with an outside diameter of 5.063 inches, an inside diameter of 1.875 inches, and a thickness of 0.125 inches, classified as a critical item requiring source inspection and compliance with stringent technical and quality standards. The item is defined by a military or consensus non-government standard, and all units manufactured after the solicitation date must conform to the current revision of that standard, with past revisions accepted only for previously manufactured hardware. The gasket must be free of asbestos as defined in Fed-Std-313 and must not contain intentional mercury or mercury compounds except in specific exempted applications such as batteries or instrument sensors, with additional containment requirements for portable devices. It carries a non-extendable 36-month shelf life under Type I Code Q requirements, and each unit must be permanently marked every three feet with the specification number, revision, type, class, and cure or manufacture date in accordance with MIL-STD-190, including approved colors and environmental resistance. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1 to protect against UV degradation. Palletization follows DLA packaging requirements, and all markings must include the special code 32 indicating Type I shelf life. The item is subject to inspection and acceptance at destination, with a delivery window of 87 days from the contract award and a required delivery date of December 31, 2026. The contractor must certify material compliance, understand bare item marking requirements, and deliver 215 units FOB origin under a firm fixed price of $215.00 each, totaling $46,225.00. The delivery address is the DLA Distribution New Cumberland Facility, and transportation logistics must adhere to DLAD Procurement Notes C19 and C20. The solicitation number is SPE7M4-26-T-328M, with a response deadline of August 21, 2026, and the item falls under Federal Supply Class 5330 with NSN 5330-01-126-8850.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
RETAINER ASSY
Solicitation # SPE7M4-26-T-329D
The retainer assembly, identified by NSN 5330-00-525-6138 and quantity of 126 units, is solicited under contract SPE7M4-26-T-329D with a response deadline of August 21, 2026, and a required delivery date 95 days after award. This item is classified as a commercial item and strictly prohibits the use of asbestos as defined in FED-STD-313. All technical and quality requirements applicable to this procurement are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Government identification must be removed from non-accepted supplies in accordance with RQ011. The procurement is administered by the Department of Defense’s Fluid Handling Division, with performance located at Tinker AFB, Oklahoma, and primary point of contact Rory O’Reilly at dla.mil. The NAICS code 339991 applies, and the solicitation is issued through the DLA eProcurement portal.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
C-SEAL
Solicitation # SPEFA5-26-Q-0069
The contract specifies the procurement of 21 units of C-SEAL, identified by NSN/part number 5331-LN-003-3716, under solicitation number SPEFA5-26-Q-0069, with a firm fixed price and no variance allowed in quantity. Delivery is required within 30 days after award, with inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements, ensuring unit of issue and quantity per unit pack match the contract specifications. The item is to be shipped to the freight address at Fleet Readiness Center DLA in Cherry Point, North Carolina, while the parcel post address is for administrative use. The required delivery date is February 26, 2027, associated with purchase request 7017339509. The contract emphasizes adherence to all DLA Master List of Technical and Quality Requirements, which supersede ANSI standards where applicable. The solicitation was posted on August 10, 2026, with responses due by August 17, 2026, and the point of contact is Tanya Whitney, reachable via email and phone provided.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7L1-26-T-947T
The contract is for two nonmetallic seals identified by NSN 5330-01-692-9075 under solicitation SPE7L1-26-T-947T, with a required delivery within 20 days of award. The item is classified as a commercial item and must be free of asbestos, with any alternative materials requiring approval under Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item must also be marked in accordance with MIL-STD-130N for U.S. military property identification, and government identification must be removed from non-accepted supplies. Covered defense information potentially applies, and packaging and handling must adhere to DLA packaging standards. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, and performance is due at Davis Monthan AFB, Arizona, under the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7M4-26-T-328P
This contract specifies the procurement of a nonmetallic special shaped seal, identified by NSN 5330005365225 and part number 3-69002-1, manufactured under requirements applicable to critical applications as defined by The Boeing Company and BASIC RUBBER AND PLASTICS CO. The item is classified as a Type I (Code U) shelf-life item with a strict non-extendable shelf life of 96 months. No asbestos is permitted per Fed-Std-313, and all packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 Type II Class C Style 1, which mandates medium duty, waterproof, greaseproof, opaque sealing to protect against UV deterioration. Packaging and marking must adhere to MIL-STD-129 and DLA Packaging Requirements, including specific codes for preservation, cushioning, and unit containment, with palletization governed by RP001. The seal is subject to inspection and acceptance at destination, with zero variance allowed in quantity. Delivery is required within 200 days from award, FOB origin, to the DLA Distribution Depot at Tinker AFB, Oklahoma, with a required ship date of July 28, 2026, and original delivery date of June 3, 2027. All technical and quality specifications referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation issue or award date based on acquisition type. The item is to be shipped under Federal Supply Classifications 5330/5331, and transportation and handling follow DLAD Proc Notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-948L
The contract pertains to the procurement of 435 O-RINGS with NSN/Part Number 5331-01-170-9114 under solicitation SPE7L1-26-T-948L, issued by the Department of Defense’s Land Supply Chain. Deliveries are required within 164 days after order, and responses must be submitted by August 21, 2026. All supplies must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and solicitation amendments. The items must be free of asbestos and any use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements; alternative materials require prior approval. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. Documentation for source approval requests must follow RC001 guidelines, and covered defense information provisions apply. The place of performance is Tracy, California, with Kristie Fown as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-948G
Offerors must submit quotations for O-rings under solicitation SPE7L1-26-T-948G, specifying manufacturer, CAGE code, item name, service identification, and test number, while ensuring compliance with FAR 52.209-1 and excluding covered telecommunications equipment or services in accordance with FAR 52.204-24 and DFARS 252.204-7016. Domestic material restrictions under the Berry Amendment, Buy American Act, and related DFARS clauses apply, requiring full disclosure of non-domestic components if applicable, with the Berry Amendment threshold now at $150,000. Small business joint ventures must provide representations under FAR 52.212-3 and 52.219-1 for eligibility in designated categories. Due to fluctuating demand, offerors are strongly advised to quote quantity ranges to facilitate award flexibility without administrative delays, though this does not apply to Auto IDC. All vendors must register via DLA’s AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with Web Services users required to update their schema per DIBBS notifications issued in April 2025. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and offers containing AM-produced items will be deemed non-compliant. Fast Pay is not available for this solicitation. Offerors unable to respond by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or reason to avoid assumption of non-procurability. APEX Accelerators offer free assistance to enhance government contracting capability. The item is for 114 units with a total PR quantity of 477, delivery due in 97 days, and performance is at Robins AFB, Georgia.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAINER
Solicitation # SPE7L1-26-T-947R
The contract is for a packing with retainer item identified by NSN 5330-01-066-9423 and part number 5267, supplied by Thomas and Betts Corp under the solicitation SPE7L1-26-T-947R. The requirement specifies one unit to be delivered within five days of award, with strict adherence to Federal standards prohibiting any asbestos as defined in Fed-Std-313. The packaging and manufacturing must comply with DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issuance or award date depending on the acquisition size. The item falls under NAICS code 339991 and is procured by the Department of Defense’s Land Supply Chain under a federal solicitation with no set-aside designation. All government identification must be removed from non-accepted supplies. The place of performance is Solomon(s), MD 20688-0054, and the primary point of contact is Kristina Derry, reachable via email and phone provided. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, DEHYDRATOR
Solicitation # SPE8E9-26-Q-0670
This contract is for a Parts Kit, Dehydrator, consisting of ten O-rings and one backup ring, intended for overhauling a dehydrator tower used in equipment supplied by Air-Dry Corp. of America, specifically for part numbers 10278-12L or 10278-12R. Two kits are required per dehydrator unit, and the total procurement quantity is 44,000 kits under NSN 4440-01-202-2080. Delivery must be completed within 60 days of award. The solicitation number is SPE8E9-26-Q-0670, issued on August 10, 2026, with responses due by August 17, 2026. The contract incorporates DLA packaging requirements and references the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except in specific exempted applications such as batteries, fluorescent lights, sensors, or weapons as defined by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier. The contract is subject to Covered Defense Information provisions and mandates removal of government identification from non-accepted supplies. The purchasing agency is the Department of Defense under the Construction & Equipment MRO_svc I, with Tracey Marcus designated as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 331420
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE7M2-26-T-6196
This contract specifies the procurement of a machine thread plug, identified by NSN 4730-01-732-5637 and part number 6PNTX-SS-QMS from CUSTOM HYDRAULIC & MACHINE, INC., with a quantity of 13 units to be delivered FOB origin within 173 days of contract award. The item is classified as a critical application component and must comply with stringent technical, quality, and packaging standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. No mercury or mercury-containing compounds may be intentionally introduced into the product except for specified functional uses in batteries, lighting, instruments, or weapon systems as authorized by NAVSEA, and any portable devices containing mercury must have shock-proof construction with a secondary containment boundary per NAVSEA 5100-003D. The supplier must adhere to DLA packaging and procurement requirements, including palletization standards, and the item must be delivered to the designated DDSP New Cumberland facility in Pennsylvania with no variance allowed in quantity. The contract prohibits deviations without formal engineering change proposals or variance requests, and all documentation must meet source approval and configuration management protocols. Delivery is required by February 11, 2027, with acceptance occurring at the destination point under inspection requirements.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE7M2-26-T-6197
The contract specifies the procurement of 764 units of screw, cap, hexagon head with NSN 5305-01-575-1782 and part number 0.62511UNC2A1.250T1G2SAN, under solicitation SPE7M2-26-T-6197. Deliveries are required within 164 days of contract award, with shipment originating from the supplier and delivered FOB origin to the DLA Distribution Puget Sound facility in Bremerton, WA. All items must comply with MIL-DTL-1222J for surface marking, requiring the material symbol, manufacturer’s symbol listed in MIL-HDBK-57, and lot number directly applied to the screw, with exceptions for items under half an inch in diameter where space constraints apply; unmarked items must have markings on packaging. The item is classified as a critical application item and must conform to MIL-STD-130N for identification marking. Packaging must adhere to MIL-STD-2073-1E and RP001 DLA packaging standards, including preservation method 10, wrap material DA, and cushioning material JC, with marking per MIL-STD-129 and no special marking codes. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and labeling, except for specific exceptions such as batteries, fluorescent lamps, and instrument controls as defined by NAVSEA, with portable fluorescent devices requiring shockproof construction and a secondary containment barrier. The contract stipulates a fixed quantity with zero variance, inspection and acceptance occur at destination, and the delivery must be completed by February 2, 2027, with an original required delivery date of November 6, 2026. The unit price is based on the total contract value, and compliance with all referenced technical and quality requirements listed in the DLA Master List is mandatory.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M2-26-T-6192
This contract specifies the procurement of an electromagnetic relay under NSN 5945-01-062-5154 with a quantity of 12 units to be delivered FOB origin within 271 days after award, with a required ship date of May 20, 2027 and an original delivery deadline of August 6, 2027. The item must comply with Technical Data Package Rev A Gen 1 per MIL-DTL-5757/1L and MIL-DTL-5757P Sup 1, and is designated as a Critical Application Item listed on a Qualified Products List or Qualified Manufacturers List. Strict prohibitions ban the intentional use of mercury or mercury-containing compounds in any supplied hardware except for functional applications in batteries, fluorescent lights, specified instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, wrapping, and container codes; all units must be marked in accordance with MIL-STD-129, including a special ZZ code and IPC/JEDEC J-STD-609-compliant lead finish markings on each unit package. Inspection and acceptance occur at destination with zero variance allowed in quantity. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, and transportation procedures follow DLAD Proc Notes C19 and C20. The solicitation was issued under SPE7M2-26-T-6192 with a response deadline of August 21, 2026, and is managed by the Department of Defense’s Nuclear Reactor Program, with Alisha Blanton as the primary point of contact.
Relay and Industrial Control Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
ROD, ACTUATOR
Solicitation # SPE7M2-26-T-6190
The contract pertains to the procurement of three ROD, ACTUATOR units under solicitation SPE7M2-26-T-6190, with a delivery deadline of 80 days after order. All supplies must comply with stringent technical and quality requirements outlined in the DLA Master List, including inspection and acceptance at origin, zero-defect sampling per MIL-STD-1916 or ASQ H1331, and strict assignment of verification levels based on attribute criticality. Mercury and mercury-containing compounds are prohibited unless specifically exempted for functional components such as batteries, sensors, or instruments approved by NAVSEA, and any portable devices containing mercury must include dual containment and be shock-proof per NAVSEA 5100-003D. The item must adhere to NAVAIR traceability standards, with bare parts marked with the contract number, NAWC CAGE, and part number unless overridden by technical drawings. Class I ozone-depleting chemicals are explicitly banned, and any alternative chemicals require prior approval. Technical data associated with this item is subject to export control under ITAR or EAR, restricting access to only DLA contractors with approved JCP certification, completed training, and DLA authorization. Compliance with DFARS 252.225-7048 is mandatory, and distribution to foreign persons, including foreign nationals within the U.S., is strictly controlled. Full and open competition applies, and all requirements supersede any conflicting specification clauses.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M2-26-T-6200
This contract is for the procurement of 52 push switches designated by NSN 5930009692683 and associated part numbers from DRS Naval Power Systems Inc and Eaton Corp, categorized as critical application items. The supplies must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific prohibitions against the intentional addition of mercury or mercury-containing compounds unless exempted for functional uses such as batteries, fluorescent lights, instruments, weapon systems, or specified reagents. Mercury-containing portable lamps and instruments must feature shock-proof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The items are subject to inspection and acceptance at the destination, with no tolerance for quantity variance. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-28786, with marking following MIL-STD-129 and no special marking required. Palletization shall conform to DLA packaging requirements, and hazardous materials handling must meet IP025 specifications. Delivery is FOB origin with a required delivery date of April 4, 2027, and a shipment deadline of February 26, 2027. All supplies must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, under the solicitation SPE7M2-26-T-6200, which was issued on August 10, 2026, with responses due by August 21, 2026. The unit of issue is each (EA), at a fixed price of $52.00 per unit.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333515
New
DIBBS
FILE, ROTARY
Solicitation # SPE7M2-26-T-6198
This contract, issued under solicitation SPE7M2-26-T-6198, pertains to the procurement of 2,048 rotary cutting tools identified by NSN 3455-00-311-6182, featuring a 0.250 inch shank, 0.375 inch cutter head diameter, 1.0625 inch cutter head length, and 2.8125 inch overall length with 18 to 24 medium-spaced teeth, conforming to Type II, Style D, Size 4, Class B per CID A-A-51186B, Revision A, General 1. All supplies must comply with DLA packaging requirements as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking, and adhere to ASTM-D-3951 for packaging, with no special marking required. The product must be free of intentionally added mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable fluorescent lamps and instruments requiring shock-resistant design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance is zero non-conformances unless otherwise specified. Delivery is FOB origin with a required delivery date of April 3, 2027, and a need ship date of February 26, 2027, with a 188-day lead time and zero variance in quantity. Inspection and acceptance occur at destination. The item must be shipped to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, in accordance with DLAD Proc Notes C19 and C20 for transportation and freight.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331221
New
DIBBS
SHEET, METAL
Solicitation # SPE7M2-26-T-6191
The contract specifies the procurement of 10 sheets of annealed 304 stainless steel, UNS S30400, with a 2B finish, measuring 36 inches wide, 96 inches long, and 0.050 inch thick, totaling approximately 50.1 pounds per sheet. All material must be supplied in whole-foot increments and conform to ASTM A240/A240M-26, Revision 26. Strict identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer name, heat and lot number, and dimensions, using only stamping or stenciling methods that are legible, waterproof, and non-contaminating. Adhesive labels are mandated for small diameter bars and tubes under 0.250 inches, while tags are acceptable for wire. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special preservation codes ZZ as defined in ASTM A700, and all markings must withstand normal handling without degradation. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for Troop Support are eligible to respond, and any deviation from this requirement must be explicitly declared; non-compliant bids are subject to rejection and may incur criminal penalties. The product qualifies as a critical application item, and metal certification documentation, including CDRL-METALSCERT, must be furnished. Mercury and mercury-containing compounds are prohibited unless part of functional components like batteries, instruments, or weapon systems, with additional containment requirements per NAVSEA 5100-003D. Delivery is FOB origin with a 164-day lead time, final acceptance at destination, and no quantity variance permitted. Shipments must be addressed to the designated DLA distribution center in Tracy, California, with transportation governed by DLA procedural notes. The NSN is 9515-01-051-9709, and all data must align with the Technical Data Package and procurement note M03.
Rolled Steel Shape Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION BLOC
Solicitation # SPE7M2-26-T-6195
The contract pertains to the procurement of Terminal Junction Blocks, Sectional, identified by NSN 5940-01-185-7564 and part number M81714/61-0Z, with a quantity of 142 units. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timing. Compliance with SAE AS81714D Revision D dated 11/01/2021 and related specifications is mandatory, and the product must adhere to TDP Rev B Gen 3 standards. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or specific chemical reagents, with portable fluorescent lamps and instruments requiring shock-proof construction and secondary containment as per NAVSEA 5100-003D. The item is subject to the Qualified Products List or Qualified Manufacturers List, and all supplies must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must follow DLA’s procurement requirements and palletization standards. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and a strict quantity tolerance of plus or minus 0 percent applies. The required delivery date is July 1, 2027, with a scheduled ship date of March 22, 2027, and delivery must occur within 212 days of award. The consignee is DLA Distribution at the New Cumberland, PA facility, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE7M2-26-T-6195 with a response deadline of August 21, 2026, and was posted on August 10, 2026, managed by the Department of Defense under NAICS code 335999.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE7M2-26-T-6194
The contract is for the procurement of 1,225 units of screw, cap, hexagon head with NSN 5305-00-050-4212, issued under solicitation number SPE7M2-26-T-6194 by the Department of Defense’s Nuclear Reactor Program. The requirement is fully competitive and governed by applicable military and federal specifications, with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which must be adhered to based on the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. Each screw must be marked with the manufacturer’s symbol directly on its surface, as defined in MIL-HDBK-57, unless the thread diameter is 0.190 inches or smaller, in which case marking is exempt; no markings are permitted on bearing surfaces. The delivery timeline requires fulfillment within 158 days after delivery order, with the place of performance specified as New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026, with Lance Son listed as the primary point of contact for inquiries regarding the procurement.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M2-26-T-6199
The contract pertains to the procurement of 37 helical compression springs identified by NSN 5360-01-301-1176 under solicitation SPE7M2-26-T-6199, with a response deadline of August 21, 2026, and a delivery requirement within 105 days after award. The acquisition is a total small business set-aside under NAICS code 332613, administered by the Department of Defense’s Nuclear Reactor Program, with performance located in Greensboro, NC. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. Strict prohibitions exist against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary as specified in NAVSEA 5100-003D. The Government’s identification must be removed from any non-accepted supplies prior to return. Primary point of contact is David Larsen, reachable via email and phone provided.
Spring Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Shipment Labeling ServicesThe contract requires the provision of military-compliant packaging and preservation services for lock washers in accordance with MIL-STD-129 and ASTM D3951 standards, ensuring all items are properly protected, labeled, and prepared for shipment. This includes the accurate application of labeling requirements mandated by military specifications and the generation of receiving reports to document delivery and compliance. Work must be performed to meet stringent defense logistics protocols, with the place of performance designated at Hill AFB, Utah, 84056-5734. The contract is structured as a subcontract under NAICS code 493190 and is administered by the Department of Defense through the Nuclear Reactor Program. Responses are due by August 20, 2026, with the solicitation posted on August 9, 2026, and all activities must align with federal defense procurement timelines and quality benchmarks.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 10 days
View Details