Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PAD, ABDOMINAL

Active
SPE2DS-26-T-325AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The product is an abdominal pad composed of multiple layers including absorbent fibers backed by a nonabsorbent fiber layer, covered with gauze or nonwoven fabric, with an alternative construction using cellulose wadding backed by nonabsorbent cotton and similarly covered. Each unit is packaged in a case of 144 pads and must maintain a shelf life of 36 months from manufacture, with no more than six months elapsed between manufacture and delivery to the government. All containers must be clearly marked with the lot or control number and the date of manufacture, prefixed with MFD. The item is identified by NSN 6510-01-271-7671 with a purchase quantity of six cases and a delivery requirement of 63 days after order award. The solicitation number is SPE2DS-26-T-325A, issued on August 9, 2026, with proposals due by August 17, 2026, under NAICS code 339112 for medical device manufacturing. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at APO ZIP 96260-5479 and primary point of contact Anh Lam via email and phone. The procurement follows DLA packaging requirements and incorporates technical and quality standards listed in the DLA Master List, with applicable revisions governed by the solicitation or amendment date. Government identification must be removed from any nonaccepted supplies.

General Info

Abdominal pads, NSN 6510-01-271-7671, 6 cases, 36-month shelf life, delivered to APO 96260 by DLA, due in 63 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

UNIT 15479, APO, AP, 96260-5479, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DS-26-T-325A Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Anh Lam
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PAD,ABDOMINAL
PAD, ABDOMINAL
.
LAYER OF ABSORBENT FIBERS BACKED W/LAYER OF NONABSORBENT FIBERS; COVERED
W/GAUZE OR NONWOVEN FABRIC LAYER OF ABSORBENT FIBERS; W/LAYER OF
CELLULOSE WADDING BACKED BY LAYER OF NONABSORBENT COTTON; COVERED
W/GAUZE OR NONWOVEN FABRIC;
UNIT OF ISSUE PACKAGE(PG) OF 144 EACH
SHALL HAVE A SHELF LIFE OF 36 MONTHS. NOT MORE THAN 6 MONTHS SHALL HAVE
ELAPSED FROM THE DATE OF MANUFACTURE TO THE DATE OF DELIVERY TO THE
GOVERNMENT.
MARKING ON ALL CONTAINERS SHALL INCLUDE THE LOT (CONTROL) NUMBER AND
DATE OF MANUFACTURE PREFIXED BY (MFD)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6510-01-271-7671 Quantity: 6 PG Purchase Request: 7017803268QTY: 6 Delivery: 63 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
DIBBS
HANDLE, LARYNGOSCOPE
Solicitation # SPE2DS-26-T-325V
The contract solicits a small pediatric laryngoscope handle made of chrome-over-brass, designed for use with a fiber optic laryngoscope blade and powered by a AA battery, with a unit of issue of one each. The item is identified by NSN 6515-01-396-4249 and is requested in a quantity of one unit for delivery within 20 days of award. The solicitation, numbered SPE2DS-26-T-325V, was posted on August 9, 2026, with responses due by August 17, 2026, under the NAICS code 339112 for medical equipment manufacturing. The purchasing agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required at Laughlin AFB, Texas, and the primary point of contact is Michael Small. Bidders must specify the source and part number being offered and are required to comply with all referenced technical and quality specifications from the DLA Master List, packaging standards, and procedures for removing government identification from non-accepted supplies.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CATHETER AND NEEDLE UN
Solicitation # SPE2DS-26-T-324C
The contract specifies the procurement of a sterile disposable intravenous catheter and needle unit in 18 gauge size with a 1.25 inch length, identified by NSN 6515-01-718-5456 and packaged in boxes of fifty. The product must meet stringent shelf-life requirements, including a non-extendable 36-month shelf life from the date of manufacturer, with no more than five months elapsed between the manufacture date and delivery to the government. All packaging and labeling must comply with the latest revision of MMS1A, clearly displaying the date of manufacture, expiration or retest date, and the contract and lot number. The item is classified as a TYPE I (CODE Q) item under RS020 and must adhere to DLA packaging standards and other technical and quality requirements referenced in the DLA Master List. The contract requires bidders to clearly identify the source and part number being supplied and mandates removal of government identification from non-accepted supplies. Delivery is required within five days of award, with the place of performance specified as Fort Lewis, Washington. The solicitation was issued on August 9, 2026, with responses due by August 17, 2026, under contract number SPE2DS-26-T-324C, managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
BEAKER, LABORATORY
Solicitation # SPE2DH-26-T-5884
The contract specifies the procurement of 250 milliliter laboratory beakers made of polypropylene, sold in packages of 50 units per pack, with a total quantity of one package. These beakers are autoclavable up to 250 degrees Fahrenheit or 121 degrees Celsius and feature dual graduations in milliliters and ounces. They are engineered for high resistance to strong acids, organic solvents, and common laboratory reagents, ensuring durability under demanding chemical conditions. The product is identified by NSN 6640-01-020-2755 and is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date. Packaging must comply with DLA requirements for medical acquisitions, including commercial packaging standards, sealed unit containers to prevent damage, and shipping containers suitable for safe transport at the lowest carrier rate. All items must be marked according to Medical Marking Standard No. 1, replacing prior MIL-STD-129 specifications. The contract also includes provisions for the removal of government identification from non-accepted supplies and applies covered defense information standards. Delivery is required within 20 days after order, with the solicitation issued under SPE2DH-26-T-5884, originating from the Department of Defense’s Medical Supply Chain FSH, and directed for performance in Jacksonville, North Carolina, with Tina Vu serving as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
DEFIBRILLATOR TEST, DIS
Solicitation # SPE2DS-26-T-323X
The contract pertains to the procurement of a defibrillator test and discharge resistor with two leads, specifically designed for discharging capacitors in the defibrillation circuit of the ZOLL PROPAQ MD device, used exclusively for troubleshooting purposes. The item is issued individually, with a single unit required under the NSN 6515-01-691-7585, and must be delivered within 20 days of award. Bidders are required to clearly state the source and part number being supplied to ensure compatibility and compliance with technical specifications. The solicitation, identified as SPE2DS-26-T-323X, is issued by the Department of Defense under the Medical Supply Chain MD Surg Fsf, with performance to occur at Scott AFB, Illinois. It incorporates technical and quality requirements referenced in the DLA Master List, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must meet DLA standards, and government identification must be removed from rejected supplies. Covered defense information may apply, and all responses must be submitted by the deadline of August 17, 2026. Point of contact for inquiries is Brooke Webb, reachable via email or phone.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTURE
Solicitation # SPE2DS-26-T-323F
The contract is for the procurement of acupuncture needles specified as silver plated spiral wound handle, 0.35mm diameter by 75mm length, manufactured from sterile, disposable stainless steel and identified by the NSN 6515-01-673-6604, with a unit of issue of one box containing 100 needles. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, which must be reviewed in its version effective on the solicitation issue date or award date, depending on the acquisition type. Packaging must comply with DLA packaging standards, and government identification must be removed from any supplies not accepted. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-323F, was posted on August 9, 2026, with a response deadline of August 17, 2026, and is categorized under NAICS code 339112 for medical equipment manufacturing. It is a federal procurement under the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, with performance delivery set for Hampton, Virginia, 23665-2040. The single purchase request calls for one box, with delivery required within 20 days of award. Primary point of contact is Dorothy Marquis at the provided email and phone number, and all bids must be submitted through the DIBBS portal prior to the deadline. Covered defense information may apply, and compliance with all applicable technical, quality, and packaging provisions is mandatory for acceptance.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CEMENT, ORTHOPEDIC SURG
Solicitation # SPE2DS-26-T-325Z
The contract specifies the procurement of a radiopaque orthopedic surgical cement set, supplied as a unit of issue containing ten each of sterile powder and liquid monomer components. Each set includes a 40-gram sterile powder mixture of polymethyl methacrylate, methyl methacrylate styrene copolymer, and barium, along with a 20-milliliter sterile liquid monomer ampule. The product must have a shelf life of 36 months, with no more than five months elapsed between the date of manufacture and delivery to the government. All packaging must meet commercial standards, with each unit sealed in a protective container to prevent damage and shipped in suitable exterior containers optimized for safe, low-cost delivery to the specified point in Williamsburg, Virginia. Markings on all containers must include the lot or control number and date of manufacture preceded by “MFD” and conform to Medical Marking Standard No. 1, which replaces MIL-STD-129. The material is classified as hazardous, requiring compliance with 49 CFR and ICAO regulations for transport, and a current Material Safety Data Sheet (MSDS) must accompany each shipment and be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The NSN is 6515-01-153-5275, the solicitation number is SPE2DS-26-T-325Z, and delivery is required within five days after delivery order.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
BLADE, SURGICAL KNIF
Solicitation # SPE2DS-26-T-324X
The contract specifies the procurement of 3 packages, each containing 10 detachable surgical knife blades, totaling 30 units, under NSN 6515-01-538-8302, with delivery required within 5 days FOB destination to Camp Pendleton, California. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, overriding any general standards like ASTM D3951, and must adhere strictly to Medical Marking Standard No. 1, which replaces MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport by common carrier at the lowest cost. The blades must include a safety locking system for maximum protection during handling and use. Marking and labeling must follow MMS No. 1 guidelines, and parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The contract requires zero variance in quantity, with inspection and acceptance occurring at the destination. The solicitation number is SPE2DS-26-T-324X, with a response deadline of August 17, 2026, and the item is classified under NAICS code 339112 for surgical appliance and supply manufacturing. The delivery point is governed by government addresses provided, and the order is subject to covered defense information protocols.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
NEBULIZER, MEDICINAL
Solicitation # SPE2DS-26-T-322Y
The contract is for the procurement of 50 units of a medicinal nebulizer featuring a mouthpiece, TEE fitting, 7-foot tubing, and a 6-inch flexible tube, with each unit packaged in a sealed container to prevent damage and ensure safe handling. All units must be packed in commercial shipping containers suitable for transport by common carriers at the lowest possible rate, with delivery required to Fort Campbell, Tennessee, within 20 days of award. Packaging and marking must strictly comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and suppliers must adhere to DLA packaging requirements. Each unit must be clearly identified using the NSN 6515-01-466-0371, and bidders are required to specify the source and part number being offered. The solicitation is governed by technical and quality requirements from the DLA Master List, with compliance determined by the revision in effect on the solicitation issue date. The contract falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain under solicitation number SPE2DS-26-T-322Y, with responses due by August 17, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
ATOMIZER, MEDICINAL
Solicitation # SPE2DS-26-T-323B
The contract is for the procurement of 7 boxes of medicinal nasal atomizers, each box containing 25 units, for a total of 175 devices. Each atomizer is a disposable, single-use nasal delivery device featuring a Luer Lock connection for secure attachment to a syringe, though the syringe is not included. The device is designed to deliver consistent and reliable medication sprays in any orientation, targeting the desired mucosal region effectively. It includes a semipermeable soft plug that absorbs runoff, enhancing patient comfort and minimizing waste. Units are individually packaged and must meet technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation or award date. Packaging and handling must adhere to DLA standards, and all government identification must be removed from non-accepted supplies. Bidders are required to clearly state the source and part number being offered. The National Stock Number is 6515-01-486-0832, with delivery required within 20 days of award to Fort Stewart, Georgia. The solicitation, issued under SPE2DS-26-T-323B, was posted on August 9, 2026, with responses due by August 17, 2026, and the procurement is managed by the Department of Defense's Medical Supply Chain under the NAICS code 339112. Primary point of contact is James Burke at the provided email and phone number.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
ADAPTER, CATHETER TO LU
Solicitation # SPE2DS-26-T-323H
The item required is an adapter for connecting a catheter to a Luer syringe, specifically designated as a Locking Luer, sterile, with the product name ADAPTER, CATHETER TO LUER SYRINGE PLUG CATHETER, LIFESHIELD, SHORT. Each unit of issue consists of five adapters packed together as one package, and all units must have a shelf life of sixty months from the date of manufacture. No more than nine months may have elapsed between the date of manufacture and the date of delivery to the government. The product must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and must also meet DLA packaging standards. The bidder must clearly state the source and part number being supplied. The National Stock Number is 6515-01-519-5778 with a total quantity of five packages requested under purchase request 7017773283. Delivery is required within twenty days after order award. The solicitation, identified as SPE2DS-26-T-323H, was posted on August 9, 2026, with responses due by August 17, 2026. Performance is to be delivered to Fort Campbell, with a ZIP code of 42223-5000, under the Department of Defense, Medical Supply Chain MD Surg FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTURE
Solicitation # SPE2DS-26-T-323J
Acupuncture needles, specified as 0.50 mm x 100 mm in dimension, are to be supplied in boxes of 100 units each, with a mandatory shelf life of 36 months and no more than five months of that shelf life elapsed at the time of delivery to the government. Each box must be clearly labeled with the NSN, manufacturer name and CAGE code, date of manufacture, expiration or retest date, and the contract or lot number. All containers must bear the lot number and date of manufacture prefixed with "MFD." The bidder must identify the company and part number being supplied, which is TC150X100 by LHASA OMS, INC. This medical device is regulated by the FDA, and the contracting official must submit a referral in EBS for confirmation, including bidder and manufacturer details. Packaging must comply with commercial standards and adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and must protect contents from damage during transit. Each unit must be sealed in a suitable container and packed in commercial shipping containers suitable for safe delivery by common carrier at the lowest rate to the designated destination in Hampton, VA. Delivery is required within 20 days FOB destination with zero variance in quantity, and inspection and acceptance occur at the delivery point. Packaging must also meet ASTM D3951 where applicable, but DLA Master List of Technical and Quality Requirements take precedence. Palletization must follow DLA procurement packaging rules, and shipment must be traceable—parcel post is strictly prohibited. The item must be delivered by August 10, 2026, under solicitation SPE2DS-26-T-323J.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE AND NEEDLE, HYP
Solicitation # SPE2DS-26-T-322R
The contract is for the procurement of 2 packages of sterile, disposable, plastic hypodermic syringes and needles, each package containing 100 units of 23-gauge, 1-inch needles with a 3-milliliter capacity, identified by NSN 6515-00-149-1206. The item has a non-extendable shelf life of 60 months and must comply with DLA’s technical and quality requirements as outlined in the DLA Master List, with the applicable revision determined by the solicitation issue date. All supplies must meet DLA packaging standards and adhere to requirements for the removal of government identification from non-accepted items. The solicitation, issued under SPE2DS-26-T-322R, requires bidders to specify the source and part number being offered, and delivery must be completed within 20 days of award to Fort Stewart, Georgia. The contracting agency is the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, with Dorothy Marquis serving as the primary point of contact. The solicitation closes on August 17, 2026, and is classified under NAICS code 339112 for surgical appliance and supply manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 621410
New
DIBBS
CULTURE MEDIA, SALMONEL
Solicitation # SPE2DS-26-T-322Z
This contract pertains to the procurement of Culture Media, specifically Salmonella Shigella Agar and Xylose Lysine Deoxycholate Agar, identified by NSN 6550-01-358-3835 and manufacturer part number R02140 from REMEL INC. The items are classified as Type I (Code A) with a strict non-extendable shelf-life of one month and require refrigeration between 2 and 8 degrees Celsius throughout storage and transport. The product is regulated by the FDA and must be supplied with full disclosure of the source and part number. Packaging must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and all units must be sealed in commercial containers designed to prevent damage, with exterior shipping containers suitable for safe delivery via common carrier at the lowest cost. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. Delivery is required FOB destination within 20 days, and the packaging must adhere to MIL-STD-2073-1E standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract falls under a federal solicitation with NAICS code 621410 managed by the Department of Defense’s Medical Supply Chain. Covered Defense Information may apply, and bidder information must be submitted to the product specialist via EBS for FDA confirmation prior to award.
Family Planning Centers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
LITTER, RIGID, SEA-AIR, M
Solicitation # SPE2DS-26-T-324M
The contract calls for the procurement of two rigid sea-air medical evacuation litters, designated by NSN 6530-01-187-0104, with a delivery requirement within 20 days after award. Each litter measures 80 inches in length and 16.5 inches in width, constructed with a stainless steel or corrosion-resistant metal frame and a special cloth stretcher, designed to be folded in half, hoisted vertically or horizontally, backpacked, and carried without hands, enabling transport into confined spaces. The litters must be orange in color and include a urethane-coated carrying case. Mercury or mercury-containing compounds are strictly prohibited unless used in functional components such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions. Bidders are required to provide the source and part number of the litters being offered. The solicitation, issued under SPE2DS-26-T-324M with a response deadline of August 17, 2026, is managed by the Department of Defense’s Medical Supply Chain, with the place of performance in Jacksonville and primary point of contact Lisa Thomas-Wright.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334510
New
DIBBS
CONNECTOR, SURGICAL
Solicitation # SPE2DS-26-T-325F
The contract pertains to the procurement of a surgical connector made from corrosion-resistant metal, specifically a Diamond O2 quick connector with a DISE male fitting and check valve, designed for use with oxygen tubing. Each unit is sold individually, with a total order quantity of ten units identified by the NSN 6515-01-457-0271 and required for delivery within five days of award. The item falls under the NAICS code 334510 and is part of a federal solicitation issued by the Department of Defense’s Medical Supply Chain, with performance located in San Antonio, Texas. All units must be packaged in sealed commercial containers that protect against damage and meet the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Shipping containers must ensure safe delivery via common carrier at the lowest feasible rate, and all packaging must comply with DLA packaging requirements. The product is subject to Defense Information that may be controlled, and technical and quality compliance standards referenced as R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders are required to specify the source and part number being offered, and the solicitation’s response deadline is August 17, 2026.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 327992
New
DIBBS
DENTAL KIT, EMERGENCY
Solicitation # SPE2DS-26-T-325D
The DENTAL KIT, EMERGENCY is a standardized medical supply containing a dental exam mirror, dental stick, toothbrush, toothpaste, dental floss, cotton-tipped applicators, oil of cloves, temporary cavity filling material, aspirin, and a gauze pad, all packaged as a single unit for immediate use. The kit must be delivered to the government within two months of manufacture and is subject to strict shelf-life requirements as a TYPE I (CODE H) item with a non-extendable 12-month shelf life. The product is regulated by the FDA, and bidders must provide the manufacturer name, part number, and source details, with the specified part number being 700014 from MYHRE'S EXPLORATION PRODUCTS, INC. All packaging must comply with commercial standards and MIL-STD-2073-1E, and items must be marked in accordance with Medical Marking Standard No. 1, ensuring protection from damage and safe transport via common carrier to the delivery point at Travis Air Force Base, California. The unit of issue is each (EA), with a contract quantity of one unit, delivery due within 20 days FOB destination, and no variance allowed in quantity. The solicitation falls under NAICS code 327992 and is governed by DLA technical and quality requirements referenced in the DLA Master List, with the contracting official required to submit an FDA referral through EBS including all manufacturer and bidder details.
Ground or Treated Mineral and Earth Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
DRESSING, COMPRESSION, T
Solicitation # SPE2DS-26-T-323C
This item is a sterile, flat-fold compression dressing designed for one-handed use in emergency trauma situations involving arterial bleeding and severe hemorrhaging in limbs. It features a 4-inch wide by 60-inch long elastic bandage and an 8-inch wide by 10-inch long absorbent pad, all packaged in a compact 4-inch by 6-inch by 0.6-inch unit weighing 3.6 ounces. The dressing meets TAA compliance standards and is intended for immediate, effective application under any condition to control life-threatening bleeding. Each unit is individually wrapped and must have a minimum 60-month shelf life, with no more than nine months elapsed between the manufacturer’s production date and the delivery date to the government. The item is identified by NSN 6510-01-598-8418 and is being procured in quantities of 20 units under solicitation SPE2DS-26-T-323C, with a delivery deadline of 20 days after award. The procurement falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain division, with performance occurring at Fort Drum, New York. Technical and packaging requirements are governed by DLA’s Master List, and government identification must be removed from any non-accepted supplies. The contract point of contact is Kendall Jones at DLA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details