Top

Paint Booth for Tyndall AFB, FL

Active

F4A3300208A003Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Tyndall Air Force Base plans to procure a paint booth specifically designed for vehicle painting, including buses, to be installed at the 325th Mission Support Group Logistics Transportation area. The paint booth will have exterior dimensions approximately 44 to 45 feet long, 17 to 18 feet wide, and about 16.5 to 17 feet high, with interior space no smaller than 16 feet wide by 16 feet high by 44 feet long. It will feature airtight panels made of 18 gauge or thicker galvanized prime steel coated with white powder, with pre-punched panels to facilitate assembly. The structure will utilize a gabled roof to help disperse shadows via interior-mounted upper lights and include at least 24 fluorescent light fixtures with tempered glass and seals. The ventilation system must include a tubeaxial fan with spark proof blades, a 3-phase motor capable of handling multiple voltage levels, and a minimum air flow of 25,600 c.f.m. at 5 inches static pressure along with a single phase option. Additional requirements include a draft gauge, a 9-foot chimney kit with necessary accessories, an automatic roof ventilator, compliance with NFPA and OSHA standards, and an ETL-listed fire suppression system. This project is a 100% small business set-aside under NAICS code 339999, with eligibility limited to businesses employing 500 or fewer personnel. The contract will be awarded as a firm-fixed price agreement through a Request for Quotes and is contingent upon year-end funding availability. Prospective bidders must be registered in the Central Contractor Registry (CCR) prior to award. The solicitation is anticipated to be posted on FedBizOps around September 3, 2010. The contracting office is located at Tyndall AFB, Florida, and the point of contact is Contract Specialist Richard L. Rynearson.

General Info

Tyndall AFB seeks firm-fixed price small business bid for vehicle paint booth, meeting NFPA, OSHA standards.

Agency

Department Of Defense → FA4819 325 Cons Pkp

NAICS

339999 - All Other Miscellaneous Manufacturing

Place of Performance

325 MSG/LRD 244 Alabama Ave, TYNDALL AFB, FL, 32540, USA

Set-Aside

SBA

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation

PostedSep 2

Presolicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → FA4819 325 Cons Pkp

Contacts1 person available

OfficeTYNDALL AFB, FL, 32403, USA

Organization / AgencyDepartment Of Defense → FA4819 325 Cons Pkp

Office AddressTYNDALL AFB, FL, 32403, USA

Contacts

Richard L. RynearsonContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

Tyndall AFB will be procuring one Paint Booth to be delivered to the 325th Mission Support Group Logistics Transportation area at Tyndall AFB, Florida. This booth will be used to paint vehicles including buses and the basic exterior dimensions are between 44 ft 4 inches to 45 ft long, 17 ft to 18 ft wide and between 16.5 ft and 17 ft high. Unit interior should be a minimum of 16 ft wide by 16 ft high by 44 ft long. Panels should consist of air tight 18 gauge (or thicker) galvanized prime steel with white powder coating. Units will be evaluated for ease of assembly and panels need to be pre-punched. Gabled roof is preferred as upper lights are usually mounted on the interior gable space which aides in dispersing shadows on the paint surfaces. At least (24) 48 inch four-tube fluorescent light fixtures with clear, tempered glass and seals. Tubeaxial fan with spark proof blades. 3 phase fan motor 208/240/480 volt fan motor, minimum 25,600 c.f.m @5 inch static pressure (with single phase option). Units will be evaluated for design and replacement cost of arrestor filters. Units should include draft gauge for exhaust filter monitoring and must meet applicable NFPS and OSHA guidelines. Units will require a 9 ft chimney kit with associated ducting, roof flashing, rain collar, connection ring etc. and an automatic roof ventilator. Units will be equipped with a ETL listed fire suppression system. This project is 100% set aside for small business. The applicable NAICS code for this acquisition is 339999 and the small business standard is 500 employees. This is an end of year project and is subject to the availability of funds. The government anticipates award of a firm-fixed price contract as result of the Request for Quotes (RFQ). All prospective offerors must be registered in Central Contractor Registry (CCR) prior to award of contract with any DoD agency. Registration may be accomplished at http://www.ccr.gov. The anticipated date that the solicitation will be posted to FedBiz Ops is 3 September 2010.