PAINT, TRAFFIC

PAINT,TRAFFIC
PAINT,TRAFFIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
.
THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL
APPROVED AT THE TIME OF THE CONTRACT AWARD.
1 CN = 5 GL
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data
SPE8ES-26-T-2609
SECTION B
sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html IN ACCORDANCE WITH THE UNIFORM FACILITIES GUIDE SPECIFICATIONS, UFGS-09900, DATED FEB 2002, DIVISION 09 FINISHES, SECTION 09900, PAINTS AND COATINGS, THE CURRENT MPI "APPROVED PRODUCTS LIST" WHICH LISTS PAINT BY BRAND, LABEL, PRODUCT NAME AND PRODUCT CODE AS OF THE DATE OF CONTRACT AWARD, WILL BE USED TO DETERMINE COMPLIANCE WITH THE SUBMITTAL REQUIREMENTS OF THIS SPECIFICATION. NO VARIATION FROM THE MPI APPROVED PRODUCTS LIST IS ACCEPTABLE.
THIS NSN HAS APPROVED PRODUCTS LIST (APL) REQUIREMENTS. THE (APL) DOCUMENT IS PUBLISHED AND MAINTAINED BY THE MASTER PAINTERS INSTITUTE, CAGE L0035 (MPI) TESTING FACILITY ADDRESS 115 TECHNOLOGY DR. PITTSBURGH PA 15275
TO DETERMINE ACCEPTABLE APPROVED PRODUCTS LIST GO TO http://www.specifypaint.com/APL/paintinfoAPLnew/ProductIdxByMPInum.asp http://www.specifypaint.com/APL/paintinfoAPLnew/ProductIdxByMPInum.asp
TO DETERMINE ACCEPTABLE MPI GPS-1-08 APPROVED PRODUCTS LIST GO TO http://www.specifygreen.com/APL/ProductIdxByMPInum.asp http://www.specifygreen.com/APL/ProductIdxByMPInum.asp
THE MANUFACTURER FOR THE APL ITEM MUST BE APPROVED FOR THE APL ITEM AT THE TIME OF THE CONTRACT AWARD.
THE MASTER PAINTERS INSTITUTE, INTENDED USE STANDARD, MPI #32, TRAFFIC
MARKING PAINT, ALKYD, DATED 05/17/2012, AND IN ACCORDANCE WITH MPI GREEN
PERFORMANCE STANDARD (GPS) 1-12. A COPY OF GPS-1-12 CAN BE OBTAINED AT
"HTTP://WWW.SPECIFYGREEN.COM/.
EXCEPTION(S) TO TECHNICAL DOCUMENT STANDARD DRY, 30 MINUTES NO PICK UP.
FAST DRY, 10 MINUTES NO PICK UP. PREMIXED REFLECTORIZED, STANDARD DRY
NOTE: PREMIXED CONFORMS TO STANDARD DRY PRIOR TO THE ADDITION OF GLASS
BEADS. GLASS BEADS WILL BE IN ACCORDANCE WITH THE CURRENT REVISION OF
TT-B-1325, IN THE AMOUNT OF 5LBS/GALLON THIS NSN HAS
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD MPI #32 REVISION NR DTD 05/01/2014 PART PIECE NUMBER: MPI 32-005G-37925 FAST DRY
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 10/12/2018 PART PIECE NUMBER:
SPE8ES-26-T-2609
SECTION B
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-595/37925 REVISION NR DTD 02/14/2017 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017964600 0001 CN 16.000
NSN/MATERIAL:8010009002940
DELIVERY (IN DAYS):0036
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
U/I = CN SIZE: 18.9 LITERS (5 GALLONS) 1 CN = 5 GL
SHALL BE IN ACCORDANCE WITH THE LATEST REVISION OF MIL-STD-129, AND SHALL CLEARLY INDICATE THE MANUFACTURED DATE AND THE EXPIRATION DATE.
ADDITIONAL REQUIREMENTS:,, 1. MIL-STD-129 LABEL WILL ALSO INCLUDE LOT OR BATCH NUMBER,, 2. NSN/Part Number: 8010-00-900-2940 Quantity: 16 CN Purchase Request: 7017964600QTY: 16 Delivery: 36 days ADO