PANEL, BUILDING, PREF

PANEL,BUILDING,PREF
PANEL,BUILDING,PREFABRICATED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
VENDOR ITEM CONTROL
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SPE8ED-26-T-1430
SECTION B
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
Shelf-life Additional Requirements
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL OF A TYPE')
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
RS045: Shelf-life requirement RS001 for a TYPE I (CODE Z) item with a shelf life of 240 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC DRAWING NR 81337 5-4-2853 REVISION NR E DTD 09/24/2013 PART PIECE NUMBER: 5-4-2853
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4512 REVISION NR F DTD 04/26/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4942 REVISION NR C DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-5159 REVISION NR D DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4517
SPE8ED-26-T-1430
SECTION B
REVISION NR B DTD 09/24/2013
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4553 REVISION NR C DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4846 REVISION NR B DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-5163 REVISION NR B DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4247 REVISION NR R DTD 12/08/2017 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4840 REVISION NR D DTD 10/28/1997 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4827 REVISION NR C DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4839 REVISION NR D DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4840 REVISION NR D DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4862 REVISION NR E DTD 10/10/2017 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-6922 REVISION NR B DTD 09/13/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 PL5-4-2853 REVISION NR H DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-5043 REVISION NR A DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-3086 REVISION NR C DTD 12/01/2017 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4500
SPE8ED-26-T-1430
SECTION B
REVISION NR E DTD 10/10/2017
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4502 REVISION NR D DTD 10/10/2017 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4503 REVISION NR D DTD 10/10/2017 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-5085 REVISION NR F DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 PL5-4-2854 REVISION NR G DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4862 REVISION NR D DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-2853 REVISION NR DTD 05/29/2020 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 17-1-6626 REVISION NR C DTD 09/15/2020 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-2854 REVISION NR J DTD 05/11/2020 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 PL5-4-4862S002 REVISION NR D DTD 09/13/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018381555 0001 EA 12.000
NSN/MATERIAL:5410014864328
SPE8ED-26-T-1430
SECTION B
PR: 7018381555 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W13PPH
W6WV USALRCTR NATICK
10 GENERAL GREENE AVE
BBP
NATICK MA 01760-0000
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W501N8
W1D1 CCDC SOLDIER CENTER
10 GENERAL GREENE AVE
UNSUPPLY UNIT SUPPLY
NATICK MA 01760-0000
US
MARKFOR
W501N8
W1D1 CCDC SOLDIER CENTER
10 GENERAL GREENE AVE
UNSUPPLY UNIT SUPPLY
NATICK MA 01760-0000
US
M/F: (TCN) W501N842470012
RDD: 248
PROJ: TP 3
SUPP ADD: W81EEL SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A0A DIST: ADV: FC: U3
SPE8ED-26-T-1430
SECTION B
PR: 7018381555 PRLI: 0001 CONT’D
Need Ship Date:00/00/0000 Original Required Delivery Date:09/06/2024
SPE8ED-26-T-1430 NSN/Part Number: 5410-01-486-4328 Quantity: 12 EA Purchase Request: 7018381555QTY: 12 Delivery: 20 days ADO