Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PANEL, CONTROL, ELECT

Active
SPE7M0-26-T-061CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense under the Maritime Supply Chain ESOC Buys agency, is for the procurement of one electrical control panel, identified by NSN 6110-01-644-0662. The contract requires strict adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. Additionally, the contract mandates the removal of government identification from any non-accepted supplies and requires alternate offerors to provide a complete data package for both approved and alternate parts. The delivery timeline is set for five days after receipt of order. Interested parties must respond by September 8, 2026, in accordance with solicitation number SPE7M0-26-T-061C. The procurement falls under NAICS code 335312 and is managed by primary point of contact Laurie Wassmuth.

General Info

DoD procurement of one electrical control panel NSN 6110-01-644-0662 due September 8, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-061C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUSA
Contacts
Laurie Wassmuth
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PANEL,CONTROL,ELECT
PANEL,CONTROL,ELECT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 6110-01-644-0662 Quantity: 1 EA Purchase Request: 7018043207QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L1-26-U-0557
Solicitation SPE7L1-26-U-0557 is a total small business set-aside for the procurement of power supplies, specifically part number TH-4322 from Arnold Magnetics Corporation. The requirement is for an estimated quantity of 10 units, with a delivery window of 127 days after the award date. This is an Indefinite Delivery Contract with a guaranteed minimum of one unit and a maximum contract value of 350,000 dollars. The items are designated as critical application items and must be delivered FOB Origin within the continental United States. The contract mandates strict adherence to several technical and quality standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and MIL-STD-1916 or ASQ H1331 for sampling. Key compliance requirements include full supply chain traceability per DLAD C03, mercury-free certification according to NAVSEA 5100-003D, and a CMMC Level 2 self-assessment for cybersecurity. Inspection and acceptance will occur at the destination. All invoicing and payment requests must be processed exclusively through the Wide Area WorkFlow system.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M0-26-T-037J
This contract, identified as SPE7M0-26-T-037J, is a solicitation for the procurement of one alternating current motor with NSN 6105-01-293-2760. The requirement is issued by the Department of Defense under the Maritime Supply Chain ESOC Buys and is designated as a total small business set-aside. Delivery is required within five days after the order, with the final destination being the Carrier Outfitting Material Support Center in Suffolk, Virginia. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specified functional cases. Technical and quality requirements are governed by the DLA Master List, and the shipment must be sent via the fastest traceable means, explicitly excluding parcel post.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335312
New
DIBBS
WEDGE, HOLDING
Solicitation # SPE4A5-26-T-361K
Solicitation SPE4A5-26-T-361K is a fixed-price request for quotations issued by DLA Aviation for the procurement of 594 units of Holding Wedges, identified by NSN 6115-01-145-3815. This item is classified as a commercial product and a critical application item, requiring a metal casting process for manufacture. The required delivery date is December 24, 2027, with a need ship date of February 12, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance will be governed by sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Additionally, the procurement is subject to domestic material restrictions, including the Buy American Act and the Berry Amendment, and requires compliance with NIST SP 800-171 and DFARS cybersecurity standards for safeguarding covered defense information.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4770
Solicitation SPE7L7-26-T-4770 is a total small business set-aside issued by DLA Land and Maritime for the procurement of nine power supply units, identified by NSN 6130-00-433-0385. This is a restricted source item requiring engineering source approval by the government design control activity. The delivery requirement is set for 190 days after the award, with shipping terms established as FOB Origin and delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, with specific AQL levels assigned for critical, major, and minor attributes. Additionally, the requirement incorporates CMMC Level 2 self-assessment and DFARS 252.204-7012 for safeguarding covered defense information. Offerors must comply with the Buy American Act and the Berry Amendment, and all payment processing must be conducted through the Wide Area WorkFlow system.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335312
New
DIBBS
SUPPORT, ANTENNA
Solicitation # SPE7M5-26-T-407P
This contract is for the procurement of 18 antenna supports, identified by NSN 5985-01-274-5264, under solicitation SPE7M5-26-T-407P. The items must adhere to the technical data in TDP Rev A Gen 1 and basic drawing 10001 2910328 Revision D. Delivery is required within 188 days, with a final need date of March 1, 2027, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict compliance with DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be conducted at the destination using sampling methods per MIL-STD-1916 or ASQ H1331. Key regulatory requirements include a prohibition on the intentional use of mercury and Class I ozone-depleting substances, as well as compliance with CMMC Level 2 self-assessment and covered defense information protocols.
ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335312
New
DIBBS
ARMATURE, MOTOR
Solicitation # SPE7M1-26-T-273N
This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of four motor armatures under National Stock Number 6105-00-900-0614. The contract requires adherence to DLA packaging standards and specific technical and quality requirements as outlined in the DLA Master List. Delivery is expected within 348 days after the order is placed, with the place of performance located at Hill AFB. The contract includes strict mandates regarding configuration change management and the removal of government identification from non-accepted supplies. Additionally, there is a prohibition on the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components like batteries or sensors as specified by NAVSEA. Offerors providing alternate parts must submit a complete data package for both the approved and alternate components.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-249J
Solicitation SPE7M1-26-T-249J is issued by the Department of Defense, specifically the Defense Logistics Agency Maritime Supply Chain, for the procurement of two alternating current motors under NSN 6105-01-211-7168. The requirement is designated as a critical application item with specific part numbers from FM AF, LLC. Delivery is required by July 28, 2027, with a total delivery lead time of 344 days. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, where both inspection and acceptance will take place. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special requirements include compliance with DLA packaging requirements (RP001) and the prohibition of intentionally added mercury, except for specific functional exceptions per NAVSEA 5100-003D. Hazardous materials must be labeled according to the Hazard Communication Standard (29 CFR 1910.1200). Administrative processes, including payment requests and receiving reports, are to be handled electronically via Wide Area WorkFlow (WAWF). Proposals must be submitted through the DLA Internet Bid Board System (DIBBS) by August 17, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335312
New
DIBBS
CONTROLLER, MOTOR
Solicitation # SPE7M1-26-T-310L
This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of two motor controllers under NSN 6110-01-697-6219. The contract requires delivery within 146 days after receipt of order and is categorized under NAICS code 335312. The primary point of contact for this requirement is Michael Reese. Crucially, this item is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-309F
This contract, identified as SPE7M1-26-T-309F, is a solicitation for the procurement of two alternating current motors, specifically part number 15S02371-1000 from Louis Allis LLC. The order is designated as a critical application item with a required delivery date of August 24, 2026, and a delivery timeframe of 20 days. The shipment is destined for the USS Makin Island LHD 8, with delivery and acceptance both set at the destination. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. This is a total small business set-aside under NAICS code 335312, managed by the Department of Defense Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335312
New
DIBBS
GENERATOR, ALTERNATI
Solicitation # SPE7L1-26-T-968L
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 14 alternating current generators under solicitation number SPE7L1-26-T-968L. The contract specifies National Stock Number 6115-01-661-0704 and requires delivery within 114 days after receipt of order. Performance is designated for New Cumberland, Pennsylvania, and the procurement falls under NAICS code 335312. The agreement incorporates specific technical and quality requirements via the DLA Master List, including packaging standards and the removal of government identification from non-accepted supplies. Because no current data is available, alternate offerors must provide a complete data package for both approved and alternate parts. Responses are due by August 24, 2026, with Brooke Lamberton serving as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-271N
This contract is for the procurement of one alternating current motor, identified by NSN 6105012340207 and part number 500826-4160 from FM AF, LLC. The item is designated as a critical application item and must be delivered to DLA Distribution San Joaquin in Tracy, California, by May 7, 2027. The delivery terms are FOB Origin, with inspection and acceptance occurring at the destination. The supplier must adhere to specific technical and quality requirements outlined in the DLA Master List, including strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. A significant environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional components like batteries or sensors as specified by NAVSEA.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-271Q
This contract is a solicitation issued by the Department of Defense Maritime Supply Chain for the procurement of one alternating current motor, identified by NSN 6105-01-293-2760. The requirement specifies a delivery timeline of 20 days after order, with the final destination being the USS Dwight D Eisenhower CVN 69. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. Technical compliance requires that no mercury or mercury-containing compounds be intentionally added to the hardware, with specific exceptions for functional components like batteries or sensors as specified by NAVSEA. The contract stipulates that shipping must be conducted via the fastest traceable means, explicitly prohibiting the use of parcel post. Inspection and acceptance will occur at the destination, and the procurement is governed by the DLA Master List of Technical and Quality Requirements.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 336611
New
DIBBS
WINDOW, MARINE
Solicitation # SPE7M0-26-T-041L
Solicitation SPE7M0-26-T-041L is a total small business set-aside issued by DLA Land and Maritime for the procurement of one marine window, identified by NSN 2090-01-542-2895. The requirement is for a single unit with a delivery timeline of five days after receipt of order, shipped FOB Destination to the SRF and JRMC Yokosuka Naval Base in Japan. The procurement is governed by NAICS code 336611 and requires compliance with CMMC Level 2 self-assessment and covered defense information standards. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, specifically requiring special marking code 36 for fragile items. Inspection and acceptance will occur at the destination per FAR 52.246-2. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware, except where functionally required and specified by NAVSEA. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Ship Building and Repairing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334416
New
DIBBS
RESISTOR ASSEMBLY, F
Solicitation # SPE7M0-26-T-060U
This contract is for the procurement of Fast Idle Resistor Assemblies, identified by NSN 5905998333139 and KNDS Defence UK Limited part number G406/8627/18. The requirement consists of two separate line items totaling three units, with delivery required within five days. The items are to be delivered FOB Origin to the DLA LMP Zone 1 facility in Texarkana, Texas, with an original required delivery date of August 27, 2026. Compliance with strict technical and quality standards is mandatory, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. A critical requirement is the application of lead finish markings on each individual unit pack in accordance with IPC/JEDEC J-STD-609. The contract specifies that shipping must be conducted via the fastest traceable means and explicitly prohibits the use of parcel post.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
COUPLING ASSEMBLY, Q
Solicitation # SPE7M0-26-T-040P
This contract is for the procurement of Coupling Assembly, Q, identified by NSN 4730017169785. The order is divided into three line items totaling 12 units, with the largest order of 10 units destined for the Carrier Outfitting Material Support Center in Suffolk, Virginia, and two individual units destined for the USS John P Murtha LPD 26. Delivery is required within five days, and the terms are FOB Destination. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, as well as RP001 packaging requirements. Shipments must be made via the fastest traceable means, and the use of parcel post is explicitly prohibited. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 331420
New
DIBBS
PIPE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-060S
This contract is for the procurement of one metal pipe assembly, identified by NSN 4710015908065 and part number 5251928 from Ed Etnyre and Co. The order is managed under solicitation SPE7M0-26-T-060S by the Department of Defense Maritime Supply Chain ESOC Buys, with a required delivery date of August 27, 2026, and a delivery timeframe of five days after order. The shipment is destined for the US Army Logistics Readiness Center at Fort Bliss, Texas. Compliance with DLA packaging requirements RP001, ASTM D3951, and MIL-STD-129 is mandatory, with specific instructions to use the fastest traceable shipping means and avoid parcel post. Inspection and acceptance will occur at the destination, and the contract adheres to the DLA Master List of Technical and Quality Requirements.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
HEAT SINK-INSULATOR
Solicitation # SPE7M0-26-T-061E
This contract is for the procurement of one heat sink-insulator, identified by NSN 5999014087904 and Mason Electric Co. part number 707-5409-3. The order is issued by the Department of Defense under solicitation number SPE7M0-26-T-061E, with a required delivery date of August 27, 2026, and a delivery timeframe of five days after order. The item is to be delivered FOB Origin and will be inspected and accepted at the destination. The supplier must adhere to specific DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. Hazardous materials must follow requirement IP025, while non-hazardous items must be commercially packaged per ASTM D3951. Shipping is directed to the Fleet Readiness Center Southeast in Jacksonville, Florida, and must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 331420
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M0-26-T-039Q
Solicitation SPE7M0-26-T-039Q, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of electrical wire under NSN 6145-00-164-6952. The primary requirement is for 100 feet of wire, with an estimated total contract value of approximately 10,060.50 based on various electrical supply line items. Delivery is required within 5 days after receiving order (ADO) to the 7th Tactical Fighter Wing in Taitung, Taiwan, with shipping terms set as FOB Origin. Inspection and acceptance will also occur at the origin. The contract is subject to stringent technical and quality standards, including DLA Master List requirements RA001, RQ011, and RQ032. Due to the nature of the technical data, the contract is governed by ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed DLA export-control training. Packaging and preservation must adhere to MIL-DTL-12000 and MIL-STD-2073-1E, while marking and barcoding must comply with MIL-STD-129. Invoicing is to be processed through the Wide Area WorkFlow (WAWF) system. Proposals must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by August 24, 2026.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M0-26-T-060X
This contract is for the procurement of one receptacle connector, identified by NSN 5935-01-181-4770 and Honeywell part number 212986-2. The item is designated as a critical application item and must be delivered to the SRF-JRMC Yokosuka Naval Base in Japan within five days. The delivery terms are FOB Destination, with both inspection and acceptance occurring at the destination. The supplier must adhere to specific DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots unless otherwise specified. Packaging requirements vary based on whether the material is classified as hazardous under FED-STD-313, with non-hazardous items following ASTM D3951 standards.
Electronic Connector Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 444180
New
DIBBS
STRIP, ELECTRICAL GR
Solicitation # SPE7M0-26-T-039G
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of one electrical grounding strip under NSN 5999-01-625-3416. The contract requires delivery within five days after the order is placed, with the place of performance located in San Diego, California. The response deadline for this requirement is August 24, 2026. The procurement is subject to several technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Because no existing data is available, the alternate offeror must provide a complete data package for both the approved and alternate parts. All technical specifications are governed by the DLA Master List of Technical and Quality Requirements.
Other Building Material Dealers

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M0-26-T-035P
This procurement is for a single unit of a Transformer, Power and Transformer, Radio Frequency with National Stock Number 5950-00-671-6701, sourced from Honeywell Intl Inc Defense under part number 1289103-1, designated as a Critical Application Item. The contract is issued under solicitation SPE7M0-26-T-035P by the Department of Defense through the DLA Land and Maritime Maritime Supply Chain ESOC Buys office, with a required delivery date of August 7, 2026, and a delivery window of five days ADO under FOB Origin terms. Inspection and acceptance both occur at the destination location, Tinker AFB, OK, with the contractor required to comply with DLA’s Master List of Technical and Quality Requirements, which supersede commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for labeling, with hazardous materials following FED-STD-313 and TQ requirement IP025, while non-hazardous items must meet commercial packaging standards unless overridden by DLA requirements. Palletization must conform to RP001, and all shipments must use traceable freight methods; parcel post is expressly prohibited. The contractor must also comply with stringent cybersecurity mandates, including CMMC Level 2 self-assessment and DFARS 252.204-7012 for safeguarding Covered Defense Information, along with related clauses on cyber incident reporting, third-party data disclosure, and prohibition of certain telecommunications equipment under DFARS 252.204-7018. The Buy American Act and DFARS 252.225-7001 apply due to the contract value exceeding the micro-purchase threshold, with additional constraints prohibiting hexavalent chromium and hazardous material disposal. The contract incorporates mandatory clauses on whistleblower rights, disclosure controls, electronic payment processing via WAWF, and limitations on arbitration agreements. All offers must be submitted through DIBBS by August 21, 2026, and the solicitation is structured as a small business set-aside with specific representations required from respondents regarding their compliance with federal regulations, entity identification, and supply chain security prohibitions, particularly those targeting Communist Chinese military companies. The item is certified under DPAS for national defense priority rating, and all administrative and payment data must align with government-established DoDAAC codes upon
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333998
New
DIBBS
ADAPTER, FLUID FILTE
Solicitation # SPE7M0-26-T-036A
The contract calls for the procurement of two fluid filter adapters under solicitation SPE7M0-26-T-036A, with a required delivery date of August 7, 2026, and a five-day delivery window from the origin point. The item is identified by NSN 4330-01-706-3815 and must be furnished FOB origin in accordance with the First Destination Transportation program. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, using specified codes for preservation, packaging materials, container types, and palletization in alignment with DLA packaging requirements. The delivery destination is Newport News Shipbuilding in Hampton, Virginia, with a parcel post address listed for the Huntington Ingalls facility, though parcel post is explicitly prohibited for shipment; instead, the item must be shipped via the fastest traceable means under RDD 999/NMCS protocols. The contract prohibits the use of Class I ozone-depleting chemicals in any part or component, superseding all specification requirements, and mandates prior approval for any substitute chemicals. Mercury or mercury-containing compounds are strictly forbidden unless part of functional components such as batteries, fluorescent lights, sensors, instruments, weapon systems, or specific chemical reagents authorized by NAVSEA; in such cases, portable fluorescent lamps or instruments containing mercury must feature shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. The item is subject to a range of Defense Federal Acquisition Regulation Supplement clauses including safeguards for covered defense information, cyber incident reporting, prohibition of hexavalent chromium, restrictions on mandatory arbitration agreements, and compliance with NIST SP 800-171 DOD assessment requirements under deviation 2026-O0025. All hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard unless otherwise specified by federal statutes, and offerors must disclose applicable exceptions. The contract includes requirements for electronic invoicing through WAWF, compliance with whistleblower protections, and representations regarding former DoD officials’ compensation and contractor cybersecurity posture. Submission must occur through DIBBS, and the solicitation is not a small business set-aside. The contracting officer is Grace Beck of the Maritime Supply Chain ESOC Buys office, and the item will be inspected and accepted at the destination.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M0-26-T-060R
This contract is for the procurement of one electrical plug connector, identified by NSN 5935009126893 and Amphenol Corp part number 10-214628-06S. The order is issued under solicitation SPE7M0-26-T-060R with a required delivery date of August 27, 2026, and a delivery timeframe of five days. The item is to be delivered FOB Origin with inspection and acceptance occurring at the destination, specifically the Portsmouth Naval Shipyard. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required by NAVSEA specifications. Shipping must be conducted via the fastest traceable means, explicitly prohibiting the use of parcel post for delivery to the Kittery, Maine freight address.
Electronic Connector Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details