Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PANEL, INDICATOR

Active
SPE4A7-26-R-X970Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one PANEL, INDICATOR with NSN 1680-01-168-3722, issued under solicitation SPE4A7-26-R-X970 as a total small business set-aside. Delivery is required within 223 days after order placement, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, including packaging standards RP001, tailored quality requirements RQ001, and inspection and acceptance at origin under RQ009. Removal of government identification from non-accepted supplies is mandated under RQ011. Item Unique Identification is not required per the service customer’s directive, though DFARS 252.211-7003(c)(1)(i) remains applicable. Digital Mylar data is provided as part of the technical package, and the contractor must ensure any conversion to stable base format maintains strict dimensional accuracy per ASME Y14.31 standards, with tolerances of ±0.005 inches vertically and horizontally and ±0.007 inches diagonally for individual grid units, and total grid tolerances of ±0.010 and ±0.014 inches diagonally. Measurements for trammmel points and registration marks must adhere to similar precision benchmarks. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All export-controlled technical data is subject to ITAR or EAR regulations, with disclosure restricted to contractors holding approved US/Canada Joint Certification Program certification, having completed required DLA training and questionnaires, and receiving explicit authorization. DFARS 252.225-7048 governs the handling and dissemination of such data to foreign persons, regardless of location.

General Info

Procure one indicator panel per military specs with strict precision, quality, and ITAR-controlled data handling requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE4A726RX970.PDF

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Lamar Olivier
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PANEL, INDICATOR RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT DIGITAL MYLAR DATA EXISTS FOR THIS NSN, AND WILL BE INCLUDED IN THE TECHNICAL DATA PACKAGE PROVIDED BY DLA. IF UNABLE TO USE THE DATA IN THE DIGITAL FORMAT PROVIDED, THE CONTRACTOR WILL BE RESPONSIBLE FOR HAVING THE DATA CONVERTED TO THE NECESSARY FORMAT (I.E. MYLAR FILM), THROUGH A THIRD PARTY AND BEAR THE ASSOCIATED COSTS WHEN CONVERTING FROM DIGITAL TO STABLE BASED FORMAT, THE DIGITAL MYLAR SHALL BE PLOTTED ON STABLE BASE MATERIAL, WHILE MAINTAINING THE DIMENSIONAL ACCURACY DEMANDS OF THE UNDIMENSIONED DRAWING. THIS INCLUDES BUT IS NOT LIMITED TO: VERIFY THE PLOT OF THE MYLAR(S) FOR DIMENSIONAL ACCURACY AS OUTLINED IN ASME Y14.31. ACCURACY SHALL BE DETERMINED VERTICALLY, HORIZONTALLY AND DIAGONALLY. ENSURE THAT THE INDIVIDUAL GRID UNITS ARE WITHIN THE TOLERANCE OF (+,-) 0.005 INCHES AND (+,-) 0.007 INCHES DIAGONALLY. TOTAL GRID TOLERANCE SHALL BE (+,-) 0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY. DRAWINGS WITH DIMENSIONAL ACCURACY POINTS SUCH AS TRAMMEL POINTS SHALL BE MEASURED TO WITHIN CENTERLINE (+,-) 0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY. REGISTRATION MARKS SUCH AS THOSE USED ON CIRCUIT CARDS SHALL BE MEASURED TO WITHIN (+,-) 0.005 INCHES AND (+,-) 0.007 INCHES DIAGONALLY.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State
SPE4A7-26-R-X970
SECTION B
SUPPLY/SERVICE: 1680-01-168-3722 CONT'D
or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1680-01-168-3722 Quantity: 1 EA Delivery: 223 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
THERMOSTAT, FLOW CONThis contract is for the procurement of a thermostat, flow control, part number 9844X110, manufactured by AMOT Controls Corp with CAGE code 94607, under the NSN 6685-01-288-9802. A total of four units are required at a unit price of $4.00, resulting in a total contract value of $16.00. The item is classified as a critical application item, and mercury or mercury-containing compounds are strictly prohibited from being intentionally added to or coming into direct contact with the hardware, except for specified functional uses such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary, per NAVSEA 5100-003D. Packaging and shipping must fully comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and all packaging must adhere to DLA’s proprietary packaging requirements. Hazardous materials packaging regulations prohibit mercury in preservation, packaging, packing, or marking. The delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The delivery timeline is 78 days from the contract award, with the original required delivery date set for July 28, 2026. The contract is a total small business set-aside under NAICS code 334519, administered by the Department of Defense, with deliveries directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Technical and quality requirements referenced in the document are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
CONTROLLER, MOTORThe contract pertains to the procurement of a single unit of a motor controller identified by NSN 6110-01-286-5041, with a delivery requirement of five days after award. The solicitation number is SPE7M0-26-T-020H, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance location in Fife, Washington. The item does not require Unique Instrument Identification per customer request, and applicable DFARS provisions govern packaging and compliance. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with specified verification levels or AQLs for critical, major, and minor attributes; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only to determine sample size, not acceptance criteria. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified reagents, with portable mercury-containing devices requiring shock resistance and secondary containment per NAVSEA 5100-003D. Configuration control is enforced through engineering change proposals and variance requests, and the technical data package is not available from DLA. The contract was posted on July 28, 2026, with responses due by August 10, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
GENERATOR, TACHOMETEThe contract is for a single unit of a tachometer generator, part number 30A-0262, with NSN 6680-00-618-5821, procured under solicitation SPE4A5-26-T-310Q. Delivery is required within 20 days from the contract date, with FOB origin terms, zero variance in quantity allowed, and inspection and acceptance performed at the origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods designated, and palletization must adhere to DLA packaging requirements. The item is not hazardous, as confirmed by HMIC review, and requires no Safety Data Sheet. No shelf life applies to this item, and unit identification is not required per customer request. Sampling for quality assurance follows MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs as specified. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date. Marking and documentation must conform to contract specifications, and the final destination is the Taiwan Army’s Zuo-Ying Ammunition Subsite in Kaohsiung City. The contract is managed by the Department of Defense, with point of contact Hien-Van Trinh, and is classified for government use only.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
Federal
RM Young Wind Monitors and Shields Spare PartsThe contract solicitation titled RM Young Wind Monitors and Shields Spare Parts is issued under solicitation number 1305M226Q0226 and is set aside exclusively for small businesses as defined by the SBA under FAR 19.5. It is classified under NAICS code 334519 and is being procured by the National Oceanic and Atmospheric Administration, a division of the U.S. Department of Commerce. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, at 7:00 PM Eastern Time. The primary point of contact for inquiries is Kyle Lawrence, reachable at kyle.lawrence@noaa.gov or by phone at 757-441-3835, and the office is located in Norfolk, Virginia, with a zip code of 23510. The spares required are specific to RM Young wind monitoring equipment and associated shields, and performance is expected to support NOAA’s operational needs, though no specific delivery location beyond the office address is provided. All submissions must comply with the requirements outlined in the combined solicitation document accessible via the provided SAM.gov link.
Department Of Commerce Noaa

POSTED

about 11 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
Federal
48 CES -JCAD SimulatorsThe contract seeks the procurement of four Argon JCAD Simulators or equivalent systems for installation at RAF Lakenheath in Suffolk, UK, with all equipment required to meet the technical specifications and performance objectives detailed in the Salient Characteristics attachment. The solicitation, identified by number FA558726Q0039, was posted on July 28, 2026, and responses are due by August 11, 2026, at 2:00 p.m. Eastern Time. It is classified as a combined solicitation under NAICS code 334519, which pertains to other commercial and industrial machinery and equipment manufacturing, and no specific set-aside provisions are indicated. The contracting activity is led by the Department of Defense through the 48th Contracting Squadron, with the office listed as admin-only and no formal requirements office. The place of performance is clearly designated as RAF Lakenheath, and all delivered systems must be compatible with operational environments at this overseas location. Point of contact for inquiries is Senior Airman Veronica Batista Velez, reachable via email at veronica.batista_velez@us.af.mil.
FA5587 48 Cons (admin Only No Req)

POSTED

about 11 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUIDThe contract solicitation SPE4A6-26-T-07TK is for the procurement of one unit each of a liquid transmitter, identified by NSN 6680010875584, with delivery required within five days of order issuance to the receiving point in Silverdale, Washington. The item is subject to stringent technical and quality requirements referenced through DLA’s Master List, including provisions for measuring and test equipment, removal of government identification from non-accepted supplies, and physical bare item marking. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. The transmitter must not contain mercury or mercury compounds in any form except for functional uses in batteries, sensors, instruments, or chemical analysis reagents as approved by NAVSEA, and mercury is strictly prohibited in preservation, packaging, and marking per IP056. Packaging must comply with MIL-STD-2073-1E using clean/dry preservation method, unit packaging code U, and commercial shipping containers, with no preservation or wrap materials used. Marking must follow MIL-STD-129 with no special markings required, and palletization must meet DLA’s RP001 requirements. FOB origin applies, with title and risk transferring to the government upon delivery at the contractor’s facility; inspection and acceptance occur at the destination. Item Unique Identification is not required under DFARS 252.211-7003(c)(1)(i). Shipment must occur via the fastest traceable means and parcel post is explicitly prohibited. The contract incorporates multiple DFARS and FAR clauses addressing cybersecurity, trafficking in persons, employment eligibility, hazardous materials, safeguarding of covered defense information, and electronic payment submission through WAWF. The solicitation does not specify pricing, and no unit prices, extended prices, or contract value are provided in Section B, indicating the pricing may be determined later or the document is incomplete. Offerors must comply with socioeconomic representation rules, disclose UEI and CAGE codes if providing covered telecommunications equipment, and submit proposals electronically through DIBBS. No formal attachments or structured evaluation factors are included in the solicitation.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL INDThe contract is for a dial indicating compound pressure-vacuum gauge, identified by NSN 6685-01-520-3520, with a single unit required and a delivery timeline of 140 days from the contract award. The item must comply with technical specifications referenced in MIL-G-18997E and DI-DRPR-80651, and all quality, packaging, and inspection requirements are governed by a suite of DLA master requirements including RQ001, RQ009, RQ011, RT001, and RQ017, which mandate tailored quality controls, origin-based inspection and acceptance, proper identification marking, and certified test equipment. Sampling follows MIL-STD-1916 or ASQ H1331 with zero defect acceptance unless otherwise specified, and critical attributes are verified at the strictest levels. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking for delicate instruments and clean/dry preparation per MIL-G-18997. Delivery is FOB origin, with no quantity variance permitted, and shipping must occur via traceable freight, explicitly prohibiting parcel post. A separate first article test line item is included with one unit designated for testing; failure to quote a price for this item will result in it being assumed cost-free, and waivers may void the line item entirely. The performance address is NSWC Philadelphia Division, and the contract is managed under solicitation SPE4A5-26-T-309S with an awarded delivery date of July 21, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
PLATE, IMAGING, RADIATIOThis contract is for the procurement of 114 units of Plate, Imaging, Radiation, identified by NSN 6635016064999, under a total small business set-aside with a contract value of $12,996. The items must be delivered FOB origin to the receiving warehouse at 25600 S Chrismann Road, Tracy, CA 95304-5000, with a required delivery timeframe of 169 days from the award date, targeting shipment by January 13, 2027. All supplies must be packaged in strict compliance with MIL-STD-2073-1E, using preservation method 41 for controlled dry storage, and marked per MIL-STD-129 with no special marking required, including proper barcoding using Data Matrix ECC200. Inspection and acceptance occur at the destination, with sampling conducted under MIL-STD-1916 or ASQ Z1.4, assigning AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor attributes; unspecified attributes are treated as major. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for functional uses in batteries, fluorescent lamps, sensors, or weapon systems specified by NAVSEA, which must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. The contract incorporates numerous FAR and DFARS clauses ensuring compliance with employment equity, human trafficking prevention, cybersecurity safeguards, hazardous material identification, and sustainable product standards. Contractors must also adhere to DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, and 252.240-7997 for NIST SP 800-171 assessment requirements. Payment is processed exclusively through WAWF, and small business subcontractors are entitled to accelerated payments. The solicitation is administered by the Department of Defense, with all proposals submitted via DIBBS, and compliance with all technical, packaging, marking, and regulatory requirements is mandatory for acceptance.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETICThe contract pertains to the procurement of a magnetic contactor with NSN/Part Number 6110-01-534-1000, requiring one unit to be delivered within 150 days of award under Purchase Request 7017440572. The solicitation number is SPE7M1-26-T-234U, issued on July 27, 2026, with responses due by August 7, 2026, and falls under NAICS code 334519. All requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Mercury or mercury-containing compounds are strictly prohibited from being intentionally added to or coming into direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, and chemical analysis reagents designated by NAVSEA. Portable fluorescent lamps and portable instruments containing mercury must be shockproof and include a secondary containment barrier for the mercury or its compounds, in compliance with NAVSEA 5100-003D. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is Michael Reese, reachable via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334519
New
DIBBS
BEZEL, INSTRUMENT MOThe contract pertains to the procurement of a BEZEL, INSTRUMENT MO with NSN 6695-01-663-9275 and part number BZLOX40034 from OXLEY, INC. Three units are required at a unit price of $3.00, for a total contract value of $9.00, with delivery required within 76 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards unless otherwise specified. The item must be inspected and accepted at the destination, with zero non-conformances permitted in sampling unless explicitly stated otherwise. Sampling follows MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must meet DLA’s RP001 packaging requirements. All government identification must be removed from non-accepted supplies. The item must be physically identified per RQ017, and all packaging must adhere to the specified unit of issue and quantity per unit pack as defined in the contract. Delivery is to the DLA Distribution facility at New Cumberland, PA, with transportation protocols outlined in DLAD Proc Notes C19 and C20. The original required delivery date is March 8, 2027, and the solicitation number is SPE4A5-26-T-310M, issued under a federal procurement by the Department of Defense.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
BLOOD COLLECTING UNITThe blood collecting unit is a medical device featuring a 7-inch tubing with a Luer adapter and a 21-gauge needle measuring 0.75 inches, equipped with a manually activated safety shield designed to fully cover the needle upon use to enhance user safety. Each unit is sold in packages of 200, identified as one PG, and must comply with rigorous technical and quality standards as outlined in the DLA Master List of Technical and Quality Requirements, with specific references to R numbers for compliance. The item is subject to the DLA Packaging Requirements, must be marked in accordance with Medical Marking Standard No. 1 which replaces MIL-STD-129, and requires packaging in sealed, commercial-grade unit containers that ensure protection from damage, with exterior shipping containers suitable for safe and cost-effective delivery to the specified point of performance at Fort Bliss, Texas. The product has a non-extendable shelf life of 36 months, with no more than five months elapsed between the date of manufacture and the date of delivery to the government. All labeling must include the date of manufacture, expiration or retest date, and the contract or lot number, following the latest revision of MMS1C. The NSN 6630-01-411-6524 is linked to solicitation SPE2DH-26-T-5522, with bids due by August 3, 2026, and delivery required within 20 days of award. The acquisition is under the North American Industry Classification System code 334519, managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must provide the source and part number being offered and ensure all items meet applicable defense information handling protocols and government packaging and marking directives.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334519
New
DIBBS
MAGNETIC INSPECTIONThis contract pertains to the procurement of a portable magnetic inspection unit under solicitation SPE4A5-26-T-310G, with a total quantity of eight units identified by NSN 6635-01-117-7746 and part number 628556. The item is classified as a commercial off-the-shelf product with a non-extendable shelf life of 60 months from the manufacturing date, coded as Type I (S), and must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking. Special handling is required due to its delicate nature, indicated by marking code 05, and all packaging must adhere to DLA procurement requirements. The unit must be delivered FOB origin within 182 days, with inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania, and no quantity variance is permitted. Item Unique Identification is not required per customer request, and the item must be free from intentional mercury or mercury-containing compounds except in specific exempted applications such as batteries or sensors, which must include secondary containment per NAVSEA guidelines. The contract incorporates quality and technical requirements from the DLA Master List, with sampling and inspection governed by MIL-STD-1916 or ASQ H1331, Table 1, and zero non-conformances required unless otherwise stated. Attributes are assigned verification levels or AQLs based on criticality, and unspecified attributes are treated as major. The supplier, Illinois Tool Works, Inc., must ensure all shipments meet transportation directives outlined in DLAD Proc Notes C19 and C20, and all materials must be properly labeled and palletized per specified procedures. Delivery is scheduled for February 3, 2027, with the contract awarded under a federal solicitation managed by the Department of Defense’s ASC Supplier OEM Division, and technical oversight is assigned to Hien-Van Trinh. The item is subject to defense information controls and must comply with applicable provisions regarding the handling of sensitive data under RD003.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and NIST SP 800-171 Assessment Support
Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541611
New
DIBBS
Export Compliance and Technical Data Control
Administrative Management and General Management Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging, Marking, and Preservation
Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Source Inspection Services
Engineering Services

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332812
New
DIBBS
Precision Machining and Fabrication of Oil Cooler Duct Assembly
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332119
New
DIBBS
SPACER, STRAIGHTThe contract specifies the procurement of five straight spacers identified by NSN 5365-01-670-7905 and part number 92510A810 from McMaster-Carr Supply Company, with a unit price of five dollars per item and a total contract value of twenty-five dollars. Delivery is required within twenty days to the destination FPO AE 09577 aboard the USS LABOON DDG 58, with FOB destination terms, zero quantity variance allowed, and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E, marking must adhere to MIL-STD-129 without special markings, and palletization must follow DLA packaging requirements. Sampling for quality assurance follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and amendment dates. The shipment must be made using the fastest traceable means, prohibiting parcel post, and must reference DLA procedural notes for transportation logistics. The original delivery deadline is July 22, 2026, and all requirements are issued under solicitation SPE4A7-26-T-597T by the Department of Defense, with point of contact Channon Dillard at DLA.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
SEAL, INTERFACE AIRCThis contract pertains to the procurement of four units of a seal interface for a 25 mm gunport and mount, designated by NSN 1560-01-388-9484 and part number LE261-0122-0005, sourced from SEAL SCIENCE, INC. and RUBBERCRAFT CORPORATION OF CALIFORNIA. The item is classified as a critical application component and must comply with all applicable technical, quality, and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. Mandatory standards include MIL-STD-1916 or ASQ H1331 for sampling with zero non-conformances required unless otherwise specified, and verified attributes must adhere to specific verification levels or AQLs. Packaging must follow DLA requirements RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and IP025, while non-hazardous items must meet ASTM D3951, though DLA requirements override any conflicting commercial standards. The delivery is FOB origin with a firm fixed price and no variance allowed in quantity, and inspection and acceptance occur at the manufacturer’s facility. The item is not subject to Item Unique Identification as per customer request, though physical marking per RQ017 is required. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and documentation for source approval must be submitted per RC001. Delivery is due 330 days after award, with all shipments directed to DLA Distribution Warner Robbins, Georgia. The contract is issued under solicitation SPE4A7-26-Q-0894, with a response deadline in August 2026 and a required delivery date of September 25, 2027. The contract specifies detailed handling for packing and labeling and references transportation protocols per DLAD proc notes, with the DLA as the contracting authority and Shenita Tirado as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336419
New
DIBBS
COVER, ACCESS, AIRCRAThe contract pertains to the procurement of one access cover for aircraft, identified by NSN 1560-00-811-2903, under solicitation SPE4A7-26-Q-0899, with a response deadline of August 7, 2026, and a delivery requirement of 250 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item involves technical data subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including within the United States, and binding U.S. companies and their foreign subsidiaries. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD training on handling export-controlled technical data, and approved completion of the DLA Export-Controlled Technical Data Questionnaire. The contracting activity is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen listed as the primary point of contact, and the performance location remains unspecified but is governed under U.S. federal procurement protocols.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
FITTING, ORIFICE, TIPThe item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333, and delivery must be completed within 44 days after order date. The solicitation, identified as SPE4A7-26-Q-0895, was posted on July 28, 2026, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. The technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Commerce. This restriction applies to all entities, including U.S. companies and their foreign subsidiaries, as well as foreign national employees. Access to the controlled data is strictly limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have successfully submitted and been approved for the DLA Export-Controlled Technical Data Questionnaire. The point of contact for inquiries is NYA Currie, reachable via email and phone provided.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PLUG, MACHINE THREADThe contract pertains to the procurement of 432 units of a machine thread plug with NSN 5365-01-035-4899 under solicitation SPE4A7-26-Q-0906, with a delivery requirement of 160 days after award. Technical data associated with this item is subject to export control under either the International Traffic in Arms Regulations or the Export Administration Regulations, meaning any disclosure to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed mandatory DLA training on handling export-controlled technical data, and have been formally authorized by DLA. The solicitation was posted on July 28, 2026, with responses due by August 7, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Mykhara Robinson as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
PRODUCTION LOT TESTINGThe contract is for the procurement of 46 piston hydraulic accumulators with NSN 0001S00000062 under solicitation SPE4A7-26-Q-0901, with a delivery requirement of 134 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contractor must comply with stringent documentation standards including a Source Approval Request, DLA packaging specifications, and tailored higher-level quality requirements for both manufacturers and non-manufacturers. Inspection and acceptance must occur at origin, and government identification must be removed from non-accepted items. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal approval from DLA may access this controlled data, as mandated by DFARS 252.225-7048. The contract is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Destiny Stevenson as the primary point of contact, and responses are due by August 11, 2026.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332710
New
DIBBS
BRACKET, FEED TUBEThe item is a BRACKET, FEED TUBE with NSN 5342-01-128-1745, quantity of 32 units, under purchase request 7015852934, with a delivery requirement of 140 days after date of award. The solicitation number is SPE4A7-26-Q-0900, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 5, 2026, and a posting date of July 28, 2026. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, restricting its disclosure to foreign persons regardless of location and applying equally to foreign national employees and subsidiaries of U.S. companies. DFARS 252.225-7048 governs the handling of this controlled data. Contractors must hold an approved U.S./Canada Joint Certification Program certification, complete mandatory DLA training on handling export-controlled technical data, and submit the DLA Export-Controlled Technical Data Questionnaire to gain authorized access. Distribution is limited exclusively to DLA contractors who have received formal approval from the DLA controlling authority.
Machine Shops

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details