Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

15--PANEL,STRUCTURAL,AIRCRAFT

Awarded
SPE4A7-26-R-0596Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to a structural panel designated for the B-52 aircraft, identified by NSN 1560-007962338 and part number 4-5001-502, which is manufactured by a list of fourteen certified suppliers including major defense contractors such as Boeing, Pratt & Whitney, Rohr, and Nordam. The procurement is structured as an indefinite quantity contract with a three-year base period and no option periods, targeting an estimated annual requirement of forty units, with production deliveries mandated to occur within 300 days. All transfers are FOB origin with inspection and acceptance also conducted at the point of manufacture. Access to technical data associated with this item is restricted to contractors certified under Department of Defense Directive 5220.22M, requiring submission of DD Form 2345 to obtain authorized access to unclassified technical data. The solicitation, issued as a total small business set-aside, will be released on or about June 17, 2026, via the DLA Internet Bid Board System, with no paper copies available. Proposals must be submitted by July 17, 2026, and the contracting activity is administered by the Defense Logistics Agency Aviation in Richmond, Virginia, with primary point of contact Ryan Loeffelholz.

General Info

IQC for structural panels for B-52, small business set-aside, three-year base, delivery 300 days.

Contract Value

$2,499,999.99

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

VA, USA

Set-Aside

NONE

Award Issued Date

Documents

3

Contract SPE4A7-27-D-0012 - Malones CNC Machining Inc

PDF, High priority: read this firstaward
High

Solicitation SPEA47-26-R-0596 Sealed Bid for Aircraft Fairing

PDF, High priority: read this firstifb
High

SPE4A726R0596 Packaging and Marking Data for Aircraft Structural Panel

PDF, High priority: read this firstsow
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Presolicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeRICHMOND, VA, 23237, USA
Office AddressRICHMOND, VA, 23237, USA
Contacts

Full Description

Show more
DLA award SPE4A727D0012 posted on DIBBS. Awardee: MALONES CNC MACHINING INC (CAGE 2V045) Total Contract Price: $2,499,999.99 Award Date: 10-05-2026 Solicitation: SPE4A7-26-R-0596 Line items: - PANEL, STRUCTURAL, AIRCRAFT (NSN/Part 1560007962338, PR 1000232831)

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
BEAM ASSY, DOOR
Solicitation # SPE4A7-27-T-1609
Solicitation SPE4A7-27-T-1609 is a fixed-price contract issued by the Defense Logistics Agency (DLA) Weapons Support ASC for the procurement of 18 units of BEAM ASSY, DOOR (NSN 1560-01-103-9449). The contract is managed by DLA Distribution Warner Robins, with a need ship date of August 6, 2027, and a final required delivery date of December 15, 2027. Delivery is set as FOB Destination to Robins Air Force Base, Georgia. The procurement incorporates the DLA Master Solicitation for Automated Simplified Acquisitions and may be eligible for automated award. The contract mandates strict adherence to quality and technical standards, including inspection at origin and acceptance at destination. Manufacturers must comply with SAE AS9003 or ISO 9001 standards, and sampling must follow MIL-STD-1916 or ASQ H1331. Packaging and marking must align with RP001 and MIL-STD-129, with specific requirements for bare item marking per RQ017. Cybersecurity compliance is critical, requiring CMMC Level 2 certification and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Export control is a primary concern, as the technical data is subject to ITAR or EAR regulations and requires prior authorization for export or disclosure to foreign nationals. Additionally, the contract enforces domestic sourcing requirements through the Buy American Act and the Berry Amendment. Offerors must be registered in the System for Award Management (SAM) and utilize the Wide Area WorkFlow (WAWF) system for electronic invoicing. A price evaluation preference is available for certified HUBZone small business concerns, while the use of additive manufacturing is prohibited unless specifically authorized.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 325520
New
DIBBS
RESIN EPOXY
Solicitation # SPE8ES-27-T-0148
Solicitation SPE8ES-27-T-0148 is a total small business set-aside request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 72 cases of Resin Epoxy, identified by NSN 8040-01-664-1544. Each case must contain 12 units. The requirement is for delivery FOB Destination to the HAZMINCEN Naval Base Ventura County in Port Hueneme, California, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after the order is placed. The material is classified as a Type I (Code K) item with a non-extendable shelf life of 18 months, calculated from the date of shipment. Due to the hazardous nature of the material, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels for review and approval prior to the award, adhering to 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific storage instructions to maintain a temperature between 60 and 80 degrees Fahrenheit. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates several critical federal and defense clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination point.
Adhesive Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS