Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Paper Towels

Active

Z4875State & Local

Response Deadline08/04/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of 2 ply paper towel rolls with a minimum sheet size of 11 inches by 8.75 inches and a minimum of 85 sheets per roll, packaged in cartons of 30 rolls each. Only products from approved manufacturers, specifically Georgia Pacific part number 27385 and Boardwalk part number 6272, are eligible for submission. The solicitation, identified by number Z4875, is issued by the Nashville Electric Service under the Tennessee state agency and is categorized as a SLED procurement. Proposals must be submitted by August 4, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 28, 2026. All deliveries are to be performed in Nashville, Tennessee, and inquiries can be directed to Procurement Contact Shanna Faulk via email at sfaulk@nespower.com or phone at 615-747-3578, with additional details available through the vendor portal link provided.

General Info

2-ply paper towels, 85+ sheets, 30 rolls/carton, Georgia Pacific 27385 or Boardwalk 6272 only, deliver to Nashville by Aug 4, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

424120 - Stationery and Office Supplies Merchant WholesalersView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(1)

Z4875_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedJul 28

Solicitation

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 07:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, US

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressNashville, TN, US

Contacts

Shanna FaulkProcurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

TOWEL PAPER ROLL ROLL PAPER TOWELS, 2-PLY. MINIMUM SHEET SIZE: 11" X 8.75". MINIMUM 85 SHEETS PER ROLL. PACKAGED 30 ROLLS PER CARTON. Approved Manufacturers and/or Part Numbers: GEORGIAGP-27385 BOARDWAL6272

Similar Contracts

Same NAICS industry code

Toner and Ink CartridgesLoudoun County Public Schools is seeking qualified suppliers through a competitive sealed bidding process to establish contracts for the supply of toner and ink cartridges to meet ongoing operational needs. The solicitation, identified as I27101, was posted on July 27, 2026, with a firm response deadline of August 26, 2026, at 7:00 PM Eastern Time. Bidders must submit sealed offers in accordance with the specified requirements to be considered for award. The contract will serve the educational institutions under the Loudoun County School Board, located in Virginia, with deliveries expected to be performed within the state. The primary point of contact for inquiries is the procurement office, reachable via email at lcpspurchase@lcps.org or by phone at 571-252-1270. All bidding information and submission details are available through the official procurement portal linked in the solicitation.

Loudoun County Public Schools

POSTED

DEADLINE

Supply of Colored Copy and Card Stock PaperThe contract involves the procurement and delivery of Neenah Astrobrights brand colored paper and card stock in specific weights, sizes, and colors to be used across Jordan School District schools. The items required are intended for educational use and must meet exact technical specifications to ensure consistency and quality in classroom materials and student projects. The opportunity is structured as a subcontract under NAICS code 424120, which pertains to office supplies and stationery merchant wholesalers, and is open for bidding with a response deadline of August 3, 2026. The solicitation was posted on July 27, 2026, and is administered by the state of Utah through its BonfireHub platform, with no designated point of contact or specific place of performance listed beyond general service to the district. The contract does not include set-aside provisions and is open to all eligible suppliers capable of fulfilling the stated requirements within the given timeline.

POSTED

DEADLINE

Neenah Astrobrights Color Papers & Card Stock for Central WarehouseThis solicitation, numbered 27BV09, issued by the Jordan School District in Utah, seeks a one-time purchase of Neenah Astrobrights Color Papers and Card Stock only, with no alternative brands accepted. Bidders must submit pricing strictly according to the unit of measure specified per line item, and all prices must be quoted in dollars and cents with no more than two decimal places—any extended pricing will be rounded up. All bids must include FOB Destination Freight Prepaid terms, and shipments must be delivered on shrink-wrapped pallets. Payment terms offering discounts are not permissible, and the contract’s terms and conditions are non-negotiable. All inquiries must be submitted through the Bonfire U3P platform during the designated Q&A period, and no other communication channels will be responded to. Submitted prices must be firm and accurate; failure to honor a bid after award will result in the next lowest responsive and responsible vendor being selected without negotiation. The contract requires delivery to a designated Jordan School District facility in Utah under FOB Destination terms, with title transferring upon acceptance at the final delivery point. Each package must bear the JSD purchase order number and include an itemized packing slip. The seller must provide a Certificate of Insurance with minimum coverage limits: $1 million bodily injury, $2 million general liability, $1 million auto liability, and a $5 million umbrella policy, with JSD named as additional insured. All personnel with student contact must pass a background check under Utah Code 53A-3-410, with costs borne by the seller. The seller must comply with Utah SB 81 regarding immigration verification, federal employment laws including Title VII and ADA, and must not subcontract or assign without prior written approval. The contract is subject to a non-appropriation clause, meaning JSD may terminate or reduce obligations if funds are not appropriated. Invoices must be mailed to JSD Accounting and include the PO number, and all documents are public records under GRAMA. The award will follow a lowest price technically acceptable model, with responsiveness determined by strict compliance with brand, pricing, freight, and documentation requirements—no trade-offs or qualitative evaluations will be conducted.

POSTED

DEADLINE

Supply of Unspecified Industrial Restock MaterialsThe Cherokee Nation is soliciting bids for the supply of unspecified industrial restock materials required for tribal operations, encompassing potential plumbing, electrical, or mechanical components not currently detailed in existing documentation. This subcontract opportunity, posted on July 27, 2026, with a response deadline of July 30, 2026, falls under NAICS code 424120, indicating a wholesale trade in industrial supplies. Bidders must be prepared to provide a range of miscellaneous items necessary to support ongoing tribal infrastructure and maintenance activities, though exact specifications remain undetermined at this stage. The place of performance and point of contact information are not provided, and no set aside type has been designated, making this an open opportunity for qualified suppliers to submit proposals. All submissions must be made through the Cherokee Nation’s procurement portal via the provided link.

Cherokee Nation

POSTED

DEADLINE

RFB - MISCELLANEOUS RESTOCK MATERIALS FOR THE CN MAIN WAREHOUSEThe Cherokee Nation is soliciting bids for miscellaneous restock materials to support operations at its Main Warehouse in Tahlequah, Oklahoma, under solicitation number Procurement #164801. Interested vendors must submit proposals offering products that meet or exceed the specified requirements outlined in the request, ensuring suitability for institutional use. The bid window is narrowly defined, with submissions due by 6:00 AM on July 30, 2026, following the posting of the solicitation on July 27, 2026. This procurement is classified under a state, local, or educational (SLED) agency type, with no set-aside provisions specified, making it open to all qualified bidders regardless of business size or demographic classification. All responses must be directed to Michelle Parsons, the designated point of contact, via email at michelle-parsons@cherokee.org or by phone at 918-453-5000. The place of performance is confirmed as the Cherokee Nation Main Warehouse in Oklahoma, and while specific delivery details or product quantities are not listed in the metadata, vendors are expected to adhere strictly to the technical and quality standards provided in the full solicitation document available on the Cherokee Nation bids portal. Bidders are encouraged to review the complete requirements prior to submission to ensure compliance and avoid disqualification.

Cherokee Nation

POSTED

DEADLINE

Packaging, Labeling, and Barcoding ServicesThe contract calls for final packaging, labeling, and barcode application services adhering strictly to Department of Defense standards, specifically MIL-STD-129 and MMS No. 1A, ensuring all items are properly prepared for military logistics and distribution. Barcodes must include both Data Matrix and UPC-A formats to guarantee compatibility across supply chain systems, with all work performed to meet the precise technical and regulatory requirements mandated by the agency. The services are intended for medical supply chain operations under the Medical Supply Chain MD Surg FSF, with performance obligations centered at Jacksonville NAS, zip code 32212. This is a subcontract solicitation posted on July 26, 2026, with responses due by August 3, 2026, and falls under NAICS code 424120 for medical and surgical equipment and supplies merchant wholesalers. While no set-aside type is specified, the contract is part of the Department of Defense’s procurement framework and is accessible via the DIBBS system. The place of performance is fixed, and all deliverables must comply fully with applicable military specifications without exception, emphasizing precision in labeling, packaging integrity, and barcode accuracy for seamless inventory management and field deployment.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Kubota RTVX2C-SKLH-1 Utility VehiclesThe contract seeks the procurement of three diesel-powered Kubota RTVX2C-SKLH-1 utility vehicles, each equipped with a factory-installed cab, full HVAC system, hydraulic dump bed, and full ROPS/OPS compliance to ensure operator safety. All vehicles must comply with SAE J2194 safety standards, OSHA 1928 agricultural equipment regulations, and current EPA emissions requirements to meet federal environmental and operational guidelines. The vehicles are to be delivered to a performance location in Washington, D.C., with a ZIP code of 20422, and must be sourced through a qualified Service-Disabled Veteran-Owned Small Business, as this is a set-aside procurement under the SDVOSBC program. The solicitation was posted on July 26, 2026, and responses are due by August 10, 2026, at 5:00 p.m. This is classified as a subcontract under NAICS code 424120, which pertains to wholesale trade of agricultural machinery and equipment, and is managed by the Department of Veterans Affairs through its 245-NETWORK Contract Office 5.

245-NETWORK Contract Office 5 (36C245)

POSTED

DEADLINE

Rite in Rain Notebooks Kits, (Tan) All-Weather Waterproof Writing or EqualThe contract is for the procurement of Rite in Rain Notebooks Kits in Tan, a total of 350 units, each containing four loose-leaf packs of 100 all-weather waterproof writing sheets designed for use in extreme conditions. The item is identified by the NSN number 7530-01-536-2652 and the specific product code Tan 9200T-Kit. This solicitation, numbered DJA-26-AEET-PR-0289, was posted on July 26, 2026, with a response deadline of August 5, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses. The North American Industry Classification System code is 424120, indicating the nature of the procurement relates to office supplies and equipment. The contracting agency is the ATF Acquisitions Management Division under the Department of Justice, located in Washington, D.C., with the place of performance specified as Huntsville, Alabama, zip code 35898. Primary point of contact for this opportunity is Charles Strickland, reachable via phone at 202-256-6989 or email at charles.strickland_jr@atf.gov. The solicitation is publicly accessible through the SAM.gov platform, with all procedural details and submission requirements directed through that official portal.

ATF | Acquisitions Management Division

POSTED

DEADLINE

Suppy and Delivery of Embossed Seals for Kingston and St. Andrew, Portland, St. Mary, Manchester, Trelawny and HanoverThe Ministry of Justice and Constitutional Affairs of the Government of Jamaica is seeking a qualified supplier to supply and deliver embossed seals for six parishes: Kingston and St. Andrew, Portland, St. Mary, Trelawny, Manchester, and Hanover. This procurement is funded through public resources and is being conducted under solicitation number 1518/436, with the opportunity posted on July 24, 2026, and a firm response deadline of August 21, 2026. The seals are essential official instruments used by parish-level government offices for authentication and administrative purposes, requiring precision, durability, and adherence to standardized security specifications. Interested suppliers must be capable of meeting the technical and logistical demands of delivering these seals to multiple locations across Jamaica, ensuring timely fulfillment and compliance with governmental requirements. All proposals must be submitted by the stated deadline, and inquiries or submissions should be directed through the official electronic procurement platform linked in the solicitation.

Ministry of Justice and Constitutional Affairs

POSTED

DEADLINE

Purchase of Twenty-five (25) Attendance Registers for the Ministry of National Security and Peace

Ministry of National Security

POSTED

DEADLINE

Laser Print Check StockThe County of Orange, through its Auditor-Controller office, is soliciting bids for the supply of Laser Print Check Stock on an as-needed basis throughout the contract term, with deliveries occurring no more than once per year unless required earlier due to operational needs. The contractor must adhere strictly to the specifications, terms, and conditions outlined in the Scope of Work, ensuring all checks meet the County’s technical and security standards. This procurement is open to qualified vendors responding to solicitation number 003-3083403-LS, with proposals due by August 13, 2026, at 11:00 PM Pacific Time. The solicitation was posted on July 23, 2026, and is targeted at suppliers capable of fulfilling the County’s check stock requirements without disruption to its financial operations. Performance is expected to be centered in Santa Ana, California, with all materials delivered to the designated County location. Point of contact for inquiries is Lorena Silva, Procurement Buyer, reachable via email or phone provided in the solicitation details.

Auditor-Controller

POSTED

DEADLINE

FY2026/DBH/SEH/Material Mngt/Star Office Supplies-TonerThe contract is forecasted for the procurement of toner supplies specifically for HP copiers under the Fiscal Year 2026 timeline, managed by the Behavioral Health department within the District of Columbia. It is listed under Star Office Supplies as the anticipated vendor and falls under the material management function to support office operations. The solicitation number is not yet assigned, and no set-aside type, NAICS code, or organization classification has been specified, indicating this is a preliminary planning notice rather than an active procurement. The place of performance and agency office address details are unavailable, and there is no designated point of contact listed in the public record. Information about the contract is accessible via a public portal link tied to the District’s contracting system, and while the intent to procure is clear, the exact scope, quantities, delivery schedules, and terms remain to be determined in future solicitations.

Behavioral Health (DBH)

POSTED

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Meter SealThe contract is for the procurement of SEAL PLASTIC ORANGE METER SEALS featuring an acrylic body with an orange insert, a regular padlock design, and a stainless steel hasp, each marked with NES. The seals are to be supplied loosely packed in boxes of 100 units. Approved manufacturers and part numbers include STARPOLYSPUNI2, INNER-TC-2070, and BROOKSM6085604-27. The solicitation is issued by Nashville Electric Service under solicitation number Z4871, with a response deadline of August 3, 2026 at 7:00 PM. The contract is classified under a SLED government type and does not specify a set-aside type or NAICS code. The place of performance and the agency's location are both in Nashville, Tennessee. All inquiries and submissions must be directed to Alan Martinez, the primary procurement contact, via email at amartinez@nespower.com or by phone at 615-747-3720. Further details and submission requirements can be accessed through the vendor portal at the provided UI link.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

Tire CleanerNashville Electric Service is soliciting tire cleaner under solicitation number Z4873, with a response deadline of August 3, 2026, at 7:00 PM Eastern Time. The product required is a 32 fluid ounce trigger spray bottle of Westleys Bleche-Wite White Wall/Blackwall Tire Cleaner, and only approved manufacturers and part numbers CMLTIRE19-100, WESTLEYS555, TRW640651, and NAPA800002224 are acceptable. The solicitation is classified under a State, Local, and Educational (SLED) organization type, and performance is required in Nashville, Tennessee. The procurement contact is Alan Martinez, who can be reached at 615-747-3720 or amartinez@nespower.com for inquiries. The contract portal for submissions and further details is accessible through the vendor portal at the provided web link.

Tire and Tube Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Fuel FilterNashville Electric Service is soliciting bids for a fuel filter designated as FILTER FUEL MC FG2 FUEL FILTER, with approval limited to the part number FLEETFF149. The solicitation, identified by number Z4869, was posted on July 28, 2026, and requires responses no later than August 3, 2026, at 7:00 PM Eastern Time. This procurement is categorized under state, local, and education (SLED) procurement and is being managed by the agency’s Tennessee operations in Nashville. The place of performance is also Nashville, Tennessee, with no specific zip code provided. Alan Martinez, Procurement Contact, serves as the primary point of contact and can be reached via email at amartinez@nespower.com or by phone at 615-747-3720. Interested vendors must submit their proposals through the official vendor portal linked via the provided UI link.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Relay SocketThe contract solicits a 8-pin screw terminal surface mount relay socket rated for 10 amperes, with approved manufacturers limited to YOUNGNDS-8, MAGNACRF70-464-1, and POTTERB27E122 or equivalent models. This item is being procured by Nashville Electric Service under solicitation number Z4874, which was posted on July 28, 2026, with responses due by August 4, 2026. The procurement falls under a State, Local, or Education (SLED) agency classification and is intended for performance in Nashville, Tennessee. All bids must comply with the specified technical requirements and approved part numbers, and no substitutes are permitted unless explicitly designated as equal. The primary point of contact for procurement inquiries is Shanna Faulk, reachable via email at sfaulk@nespower.com or phone at 615-747-3578, and additional details can be accessed through the vendor portal at the provided link.

Relay and Industrial Control Manufacturing

POSTED

about 22 hours ago

DEADLINE

Locking BandThe locking band is a one-piece band constructed of 304 stainless steel with a thickness of .022 inches, designed for quick, tool-free installation on electric meters. It features an integrated thumb screw with a flathead slot for manual tightening or loosening, and both the thumb screw and its receiver are permanently affixed to the ring to prevent loss of parts and enable one-handed operation. The band opens and closes by engaging the thumb screw into its receiver and can be secured with or without a barrel lock for added flexibility. A standardized slot is incorporated to accept a common seal, and the design allows side-entry installation from either side of the meter. The optional barrel lock includes a keyless insertion system, is compatible with Nashville Electric Service’s current keying standard, and features a weather seal to guard against dirt and debris. The barrel lock is standard length and ensures durability in outdoor conditions. The contract, titled Locking Band and identified by solicitation number Z4867, is issued by Nashville Electric Service under the Tennessee state agency and is open for bid through the vendor portal. The solicitation was posted on July 27, 2026, with a response deadline of August 3, 2026. The sole approved manufacturer and part number is DEWAL CH3001. Procurement inquiries should be directed to Alan Martinez, the primary contact, via email at amartinez@nespower.com or by phone at 615-747-3720. The performance location is Nashville, Tennessee, and the contract is targeted at state, local, and educational government entities under a SLED classification. Bidders must comply precisely with the material, dimensional, and functional specifications to meet the technical requirements for secure, long-term utility use.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of 22" Windshield Wiper Blades (TRICO 22-15B / MASTER P MP22B)Nashville Electric Service is seeking to procure 900 units of 22-inch windshield wiper blades, specifically the TRICO 22-15B or MASTER P MP22B models, with no installation or additional services required. The solicitation is classified as a subcontract under NAICS code 336370 and was posted on July 24, 2026, with responses due by July 30, 2026, at 7:00 PM. The place of performance is in Nashville, and interested parties must submit their bids through the vendor portal at the provided link. All units must meet the specified model requirements, and vendors are expected to deliver the product as-is without any added support services.

Motor Vehicle Metal Stamping

POSTED

DEADLINE

Supply of Approved Manufacturer Components (HUBBEL CBAB38 or ALUMA-FOBAB-38)The contract requires the supply of exclusively pre-approved pole band fastening components, specifically HUBBEL CBAB38 or ALUMA-FOBAB-38, with no substitutions permitted under any circumstances. Full product traceability and certification are mandatory, ensuring that every component delivered can be verified for authenticity and compliance with the specified standards. This is a subcontract solicitation issued by Nashville Electric Service under NAICS code 332215, with a response deadline of July 30, 2026 at 7:00 PM. The place of performance is tied to Nashville, and all deliveries must meet the strict requirements outlined without deviation. The solicitation was posted on July 24, 2026, and submissions must be made through the designated vendor portal linked in the contract details.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Supply of Galvanized Fasteners (Bolts, Nuts, Washers)Nashville Electric Service is soliciting bids for the supply of hot-dip galvanized carriage bolts in two sizes, 3/8 inch by 6 inches and 5/8 inch by 7-1/2 inches, along with Grade 5 nuts conforming to ASTM A-449, flat washers, and lock washers, all of which must be galvanized in accordance with ASTM A153 standards. The contract is structured as a subcontract with a response deadline of July 30, 2026, at 7:00 PM, and was posted on July 24, 2026, with the NAICS code 332996 indicating specialty trade contracting for other structural metal product manufacturing. Performance of the contract is expected to be centered in Nashville, Tennessee, with no specific set-aside classification indicated. Bidders must submit proposals through the vendor portal at the provided link, and all materials must meet the specified material and coating requirements to ensure corrosion resistance and mechanical compatibility for use in electrical infrastructure applications.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Supply of Aluminum Retainer ExtrusionsThe contract calls for the manufacture and supply of 0.75-inch fixed and sliding retainer extrusions made from 6061-T6 aluminum or an equivalent material that meets or exceeds minimum tensile strength of 38,000 PSI and yield strength of 35,000 PSI. The materials must be produced to precise dimensional and mechanical specifications to ensure compatibility and performance in their intended application. The work is being solicited as a subcontract under NAICS code 332322, which identifies the industry as Other Fabricated Metal Product Manufacturing. The solicitation was posted on July 24, 2026, with responses due by July 30, 2026, at 7:00 PM local time. The place of performance is in Nashville, and the awarding organization is Nashville Electric Service, a utility entity based in Tennessee. All submissions must be made through the vendor portal accessible via the provided link.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Supply of 1/2" Deep Well Impact Socket (6-Point, with Locking Pin)Nashville Electric Service is seeking the procurement of 20 units of a 1/2-inch drive, deep well, 6-point impact socket equipped with a hole for a positive locking pin, specifying that only genuine SNAP ON model 37316 or PROTO model J7316H units will be accepted. The requirement is issued under a subcontract solicitation with a response deadline of July 30, 2026, at 7:00 PM, and the solicitation was posted on July 24, 2026. The work is to be performed in Nashville, and the contract falls under NAICS code 332211, which corresponds to forgings and stampings manufacturing. Bidders must ensure full compliance with the exact part specifications and brand authenticity, as no substitutions or alternatives will be considered. Interested parties must submit proposals through the official vendor portal linked in the solicitation.

Cutlery and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Supply of 3/4 HP Single-Phase Capacitor Start Electric MotorsNashville Electric Service is seeking to procure six 3/4 HP, single-phase, capacitor-start electric motors operating at 220 volts with a 5/8 inch keyed shaft and Frame Size 56, to be supplied exclusively by approved manufacturers including WEG ELEC, MARATHON, or DAYTON. The solicitation, posted on July 24, 2026, requires responses no later than July 29, 2026, at 7:00 PM, and is structured as a subcontract under NAICS code 335312. All units must meet strict technical specifications and come from pre-qualified suppliers to ensure compatibility and performance standards. Performance of the contract is expected to occur in Nashville, Tennessee, with no additional set-aside provisions or specific organization type requirements stated. Interested parties must submit proposals through the official vendor portal linked in the solicitation.

Motor and Generator Manufacturing

POSTED

DEADLINE

in about 16 hours

Combination Wrench Set SupplyNashville Electric Service is seeking proposals for the supply of 4-piece combination wrench sets featuring a six-point design, specifically engineered to meet the mechanical and safety standards required for use in electrical utility operations. The contract is issued as a subcontract with a North American Industry Classification System code of 332216, indicating the focus on forged steel tool manufacturing. Proposals must be submitted by July 30, 2026, at 7:00 PM Eastern Time, following a posting date of July 24, 2026. The tools are intended for performance in Nashville, Tennessee, and must comply with industry-grade durability and precision requirements to ensure safe handling in high-risk electrical environments. Interested vendors can access further details and submit responses through the official bidding portal at the provided URL.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE