This Solicitation opportunity from Department Of Defense was posted on September 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PARTS KIT, ACTUATOR,

Closed

SPE4A7-26-T-758JFederal

Submission Closed09/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

SLED

Hartzell Propeller Replacement Parts SupplyThis subcontract for the Texas Department of Transportation involves the supply of genuine OEM replacement parts and hardware necessary for the overhaul of Hartzell Propeller Assembly PN: HC-E4N-3G. The scope of work includes sourcing all components required for Service Bulletin compliance and ensuring that all parts are certified for aviation use with FAA Form 8130-3 or an equivalent certification. The selected provider is responsible for delivering all necessary replacement components directly to the overhaul facility, with all parts covered by the manufacturer's standard warranty. This procurement falls under NAICS code 336413 and supports prime contractors working on TxDOT aviation projects.

Texas Department of Transportation

POSTED

DEADLINE

Hartzell Propeller Overhaul and CertificationThis subcontract involves the complete overhaul and certification of a Left Hand Hartzell Propeller Assembly (PN: HC-E4N-3G) for prime contractors working on Texas Department of Transportation aviation projects. The selected provider must perform comprehensive diagnostic evaluations and overhaul procedures in strict accordance with Hartzell manufacturer specifications and Service Bulletins to ensure the assembly is restored to a fully airworthy condition. To qualify for this project, the contractor must operate an FAA-certified repair station and possess aviation-grade diagnostic tools. The final deliverable is one fully overhauled and certified propeller assembly. This opportunity is categorized under NAICS code 336411 and is associated with the Texas Department of Transportation.

Texas Department of Transportation

POSTED

DEADLINE

Aircraft Wing Trailing Edge Panel SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div, requires the manufacture or procurement of three aircraft wing trailing edge panels. The specific component is part number 34-1280-521, identified by NSN 1560008597725, and must be produced in strict accordance with Drawing NR 98748 9485265 Revision C and TDP Rev B Gen 2. Deliverables include the completed panels along with essential quality documentation, specifically Certificate of Quality Compliance and DD Form 1423s. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413, with the place of performance located at Tinker AFB. Interested parties must respond by November 6, 2026. This project supports prime contractors involved in aircraft component procurement to ensure the availability of critical wing assembly parts.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Aircraft Ground Servicing Covers (NSN 1730017235267)This subcontract involves the manufacture or procurement of nine aircraft ground servicing covers, identified by NSN 1730017235267, for prime contractors supporting Department of Defense DLA supply contracts. The provider must ensure all units adhere to the DLA Master List of Technical and Quality Requirements and follow ASTM D3951 and MIL-STD-129 standards for packaging and marking. Final delivery is required at DLA Distribution DDSP New Cumberland. Compliance requirements for this engagement include adherence to the Buy American Act and a completed CMMC Level 2 self-assessment. The contract falls under NAICS code 336413 and is managed through the Department of Defense. Interested parties must meet the response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Structural Aircraft Plates (NSN 1560-01-632-1615)This subcontract involves the supply of eight structural aircraft plates meeting NSN 1560-01-632-1615 specifications for prime contractors supporting DLA supply contracts. The selected provider must manufacture or source the plates and ensure they are packaged according to TQ IP025 or ASTM D3951 standards. Additionally, the contractor must maintain ISO 9001:2015 certification and guarantee strict compliance with DFARS 252.223-7008 regarding the use of hexavalent chromium. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. While the place of performance is listed in San Diego, the final delivery destination for the units is Cherry Point, North Carolina. Interested parties must submit their responses by November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Spring Tie Rods (NSN 1560-00-221-1214)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supplier of Aircraft Ground Servicing Shields (NSN 1730009334686)This subcontract, issued by Construction and Equipment MRO SVC I for the Department of Defense, requires the manufacture or procurement of 52 aircraft ground servicing shields identified by NSN 1730009334686. The selected supplier will support prime contractors delivering DLA supply contracts, with performance taking place at Tinker AFB. The project mandates strict adherence to packaging standards per DLA RP001 and the removal of government identification according to RQ011. The contract is designated as a Total Small Business Set-Aside under NAICS code 336413. Compliance is required for several critical federal regulations, including DFARS 252.204-7012, DFARS 252.223-7008 regarding Hexavalent Chromium, and the Buy American requirements of DFARS 252.225-7001. The response deadline for this opportunity is November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Actuating Cylinders (NSN 1650-0151-25143)This subcontract involves the manufacture or sourcing of six actuating cylinders, specifically identified by NSN 1650-0151-25143, to support prime contractors fulfilling Department of Defense requirements. Managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract mandates strict adherence to DLA quality standards for aerospace components to ensure operational reliability. Logistics for the delivery of these units are coordinated under First Destination Transportation program terms with shipping handled as FOB Origin. The place of performance is located in Tracy, California, and the procurement falls under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Doubler (NSN 1560LLNC09669)This subcontract involves the procurement of one Doubler, identified by NSN 1560LLNC09669, to support prime contractors fulfilling DLA supply contracts. The selected provider is responsible for manufacturing or sourcing the component in strict accordance with established technical specifications and the DLA Master List of Technical and Quality Requirements. Additionally, the item must be packaged and labeled according to RP001 DLA Packaging Requirements for Procurement. The contract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance taking place in Cherry Point. Eligible bidders must maintain a valid CAGE code and active SAM registration. The response deadline for this requirement is November 6, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Fuel Pump Housing Supplier (NSN 2910013515941)This subcontract involves the manufacture or procurement of one Fuel Pump Housing, identified by NSN 2910013515941, to support prime contractors under the DLA Weapons Support Land Supply Chain. The selected supplier is responsible for ensuring the component is properly marked according to MIL-STD-129 and packaged and palletized in compliance with RP001 DLA Packaging Requirements for Procurement. The project falls under NAICS code 336413 and is managed by the Department of Defense. Performance will take place in Mechanicsburg, Pennsylvania. Interested parties must respond by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Aircraft Structural Panels (NSN 1560016480313)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Fan Shroud Seals (NSN 2930011023491)This subcontract involves the procurement of 121 Fan Shroud Seals, identified by NSN 2930011023491, to support prime contractors fulfilling DLA supply contracts. The Department of Defense, specifically the DLA Weapons Support Land Supplier Opns Engines, requires these parts to be manufactured or sourced in strict accordance with the Buy American Act and the Berry Amendment. The selected provider must deliver all 121 units along with a Certificate of Quality Compliance prepared according to the Supplemental Quality Assurance Provision. Performance for this contract is designated for Texarkana, Texas, under NAICS code 336413.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 9 hours ago

DEADLINE

in 11 days

AI Contract Overview

Solicitation SPE4A7-26-T-758J is a fixed-price request for quotations issued by DLA Aviation for the procurement of six actuator parts kits, identified by NSN 1650-00-712-1687. The requirement specifies a delivery timeframe of 171 days after order, with a need ship date of March 16, 2027, and a final required delivery date of March 26, 2027. Shipping is FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to quality and technical standards, incorporating the DLA Master List of Technical and Quality Requirements and requiring packaging in accordance with ASTM D3951 and MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with specific AQL levels assigned for critical, major, and minor attributes. Additionally, the awardee must comply with CMMC Level 2 self-assessment requirements and various FAR and DFARS clauses, including those regarding the Buy American Act, the Berry Amendment, and the safeguarding of covered defense information. Quotations are due by September 25, 2026.

General Info

DLA Aviation seeks six actuator parts kits by March 2027 via fixed-price quotation.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

SPE4A7-26-T-758J Request for Quotations

18 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 17

Solicitation

Response DeadlineSep 25

Deadline has passed

Submission Closed

09/25/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Office AddressUSA

Contacts

Shelbye Booker

contact@example.gov

+1 (555) 000-0000

Full Description

PARTS KIT,ACTUATOR,
PARTS KIT, ACTUATOR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
ITT CORPORATION
CAGE 73760
P/N 104685AN
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
ITT AEROSPACE CONTROLS LLC 73760 P/N 104685AN
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A7-26-T-758J
SECTION B
PR: 7018391809 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018391809 0001 EA 6.000
NSN/MATERIAL:1650007121687
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML +1 (555) 000-0000
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:03/16/2027 Original Required Delivery Date:03/26/2027
SPE4A7-26-T-758J NSN/Part Number: 1650-00-712-1687 Quantity: 6 EA Purchase Request: 7018391809QTY: 6 Delivery: 171 days ADO