Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PARTS KIT, HYDRAULIC

Active
SPE4A1-26-T-2430Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a hydraulic-pneumatic linear parts kit designated by part number 4810-00-252-9078, with a quantity of 29 units, to be delivered within 171 days of award. The kit must comply with Air Force drawing 9672238-10 and adhere to specified material standards including AMS-P-83461, SAE AS83461/1, and NASM24693, with mandatory use of qualified products listed on QPL-83461. Ozone-depleting chemicals are strictly prohibited in all components, and any substitutions require prior approval unless explicitly permitted by the specification. The item is subject to export control under ITAR or EAR, with technical data restrictions applying to both foreign nationals within the U.S. and overseas entities; access is limited to DLA contractors with approved US/Canada Joint Certification Program status, completed export control training, and DLA authorization. No item unique identification is required per customer request, though physical marking standards and removal of government identification from non-accepted supplies apply. Packaging must meet DLA guidelines, and source approval documentation is required. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the controlling revision determined by acquisition type and solicitation date. The contract was issued under solicitation SPE4A1-26-T-2430 by the Department of Defense’s Aviation Supply Chain, with performance to occur at Hill AFB, Utah, and primary point of contact Scott Brunner.

General Info

Procure 29 hydraulic-pneumatic kits per Air Force drawing, comply with material specs, ITAR/EAR controls, DLA packaging, delivered in 171 days to Hill AFB.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A1-26-T-2430 for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Scott Brunner
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PARTS KIT,HYDRAULIC
PARTS KIT, HYDRAULIC-PNEUMATIC, LINEAR.
I.A.W. AIR FORCE (98748) DWG. 9672238-10
EXCEPTIONS:
USE AMS-P-83461 AND SAE AS83461/1 ILO M83461/1
USE QPL-83461
USE NASM24693 ILO AN507-632-5
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) "REFERENCE MATERIAL-INCLUDES HANDBOOKS, MANUALS, PRICE LISTS, REGISTRIES, DIRECTORIES, BOOKS, ETC." CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS
SPE4A1-26-T-2430
SECTION B
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4810-00-252-9078 Quantity: 29 EA Purchase Request: 7017487322QTY: 29 Delivery: 171 days ADO

Similar Contracts

NAICS: 332911
New
DIBBS
PISTON, VALVEThe contract pertains to the procurement of two piston valve units identified by NSN 4820-01-450-3625 and part number 21198-1005-1 furnished by Sargent Aerospace & Defense, LLC. The item is designated as a critical application component and must comply with rigorous technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited unless expressly exempted for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices required to have shockproof construction and secondary containment per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containment, and marking must follow MIL-STD-129 with no special identification codes. The units are to be delivered FOB origin within 21 days of contract award, with a required ship date of August 18, 2026, and an original delivery deadline of October 6, 2026. Quantity must be exact with zero tolerance for variance. Inspection and acceptance occur at the destination. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics must conform to DLAD Proc Note C19 for in-transit handling and C20 for initial destination. The contract was solicited under SPE7M5-26-T-327X, with a response deadline of July 27, 2026, and is managed by the Department of Defense’s Active Devices Division, with Daniel Zimmerman as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
Supply of Commercial TEE, TUBE for Diesel Engine ApplicationsThe contract pertains to the supply of fifteen commercial off-the-shelf TEE, TUBE components identified by NSN 4730011800751, specifically designed for integration into diesel engine fluid systems. These components must fully comply with military packaging requirements and hazardous material labeling standards to ensure safe handling, transportation, and operational readiness within defense environments. The procurement is structured as a subcontract under the NAICS code 332911, indicating involvement in other fabricated metal product manufacturing, and is intended to support the Fluid Handling Division of the Department of Defense. Performance of the contract will be executed at Tracy, California, with a zip code of 95304-5000, and all deliverables must be furnished in accordance with federal and military specifications. The solicitation was posted on July 14, 2026, with a firm response deadline of July 27, 2026, providing potential vendors a twelve-day window to submit proposals. The contract’s UI link directs to the DIBBS platform, the official portal for defense procurement activities, where detailed technical and administrative requirements are accessible to qualified contractors. Although no specific set-aside designation or point of contact is listed, bidders are expected to satisfy all technical, logistical, and compliance criteria outlined by the Department of Defense for military-grade fluid system components. Timely and complete submission adhering to labeling and packaging standards is critical to avoid disqualification.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVEThe contract pertains to the procurement of 12 units of SEAT, VALVE with NSN 4820-01-349-7094 under solicitation SPE7MC-26-T-135Q, with a response deadline of July 27, 2026, and delivery required within 103 days of award. Full and open competition applies, and the item is subject to stringent technical and quality requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition type. Packaging must comply with DLA standards, and all supplies must be free of Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval unless explicitly permitted by the specification. Mercury and mercury-containing compounds are strictly prohibited except in specific functional components such as batteries, fluorescent lights, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment barrier in accordance with Navsea 5100-003D. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, and distribution is limited exclusively to contractors with approved US/Canada Joint Certification Program status, completion of DLA-export control training, and formal approval from the DLA controlling authority. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted supplies. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Alex Xanthakis at DLA Dist San Joaquin.
DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
Gate Valve Supply (NSN 4820015695855)A commercial gate valve meeting NSN 4820015695855 specifications is being procured for delivery to DLA Land and Maritime under a subcontract awarded by the Department of Defense. The supplier is required to ensure full compliance with federal standards for packaging, labeling, and transportation to support the Defense Logistics Agency’s inventory and distribution requirements. The item falls under NAICS code 332911, indicating it involves the manufacturing of other fabricated metal products, and must be delivered in accordance with precise military logistics protocols. The opportunity was posted on July 14, 2026, and the contract is associated with the award reference SPE7M126P3517, though no specific place of performance or point of contact is listed. All deliverables must align with federal stock item regulations to ensure seamless integration into the Defense Department’s supply chain.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

N/A
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, TEThe contract pertains to the procurement of five Temperature Regulating Valves, Model D-26, with W and L Thermostat configurations, identified by NSN 4820-00-276-8966, under solicitation SPE7M1-26-T-209V. These valves must conform to the military specification MIL-DTL-3155D and are classified as a Critical Application Item, requiring strict adherence to technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements. The supplier must comply with sampling requirements per MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowable unless otherwise stated, and assign verification levels or AQLs as specified for critical, major, and minor attributes. All components must be free from intentional use of mercury or mercury-containing compounds, except for approved exceptions such as batteries, fluorescent lights, sensors, controls, weapon systems, or Navsea-specified reagents, with portable devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with packaging code U, preservation method AE, and no special marking required. Palletization must comply with DLA Packaging Requirements, and the delivery of items must be FOB origin, with inspection and acceptance occurring at the destination. The total quantity of five units must be delivered within 187 days from the contract award, with a required ship date of January 31, 2027, and no quantity variance permitted. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The item is listed on the Qualified Products List, ensuring only qualified manufacturers may supply, and full and open competition applies. The purchase unit is each, priced at $5.00 per unit, with payment tied to successful delivery and acceptance at the destination.
MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details