This Government Contract opportunity from Texas was posted on May 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Patch Plate Installation

Closed

State & Local

Submission Closed06/02/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238220

New

SLED

Optional Upgrades and Technology Integration ServicesThe contract calls for the installation and integration of optional technology upgrades on school buses, including GPS tracking systems, onboard video cameras, Wi-Fi connectivity, wheelchair lifts, and telematics platforms. These enhancements are intended to improve student safety, operational efficiency, and accessibility, with all equipment requiring seamless integration into existing bus infrastructure. Vendors must demonstrate technical expertise in deploying these systems, ensuring compatibility, reliability, and compliance with industry standards for educational transportation environments. This is a subcontract under the Local Government Purchasing Cooperative d/b/a BuyBoard, governed by NAICS code 238220 for electrical and wiring installations, and is open for proposal submissions with both the posting and response deadline set for July 30, 2026. The work is to be performed across Texas, though specific locations are not detailed, and participation is facilitated through the BuyBoard procurement portal. Contractors are expected to provide comprehensive support throughout implementation, including training, documentation, and ongoing system maintenance as part of their service delivery.

The Local Government Purchasing Cooperative d/b/a BuyBoard

POSTED

DEADLINE

Water Storage Tank ReplacementThe contract is for the removal of an existing 2,000-gallon hydropneumatics tank and the installation of a new 4,000-gallon water storage tank at a location in Roaring Gap, North Carolina, with a ZIP code of 28668. This is a subcontract under the NAICS code 238220, which corresponds to plumbing, heating, and air-conditioning contractors. The work is being procured by the N.C. Department of Natural and Cultural Resources, Division of Parks and Recreation. The opportunity was posted on July 22, 2026, and responses are due by August 5, 2026, at 5:00 p.m. There is no specified set-aside designation or additional details regarding the point of contact or delivery address beyond the place of performance.

N.C. Department of Natural and Cultural Resources, Division of Parks and Recreation

POSTED

DEADLINE

Plumbing System Installation and ModificationsThe contract entails the installation of new plumbing lines and necessary modifications to integrate a new water tank and well into the existing water distribution system at a park located in Roaring Gap, North Carolina. The work is focused on enhancing the park’s water infrastructure by ensuring seamless connectivity and functionality between new and existing components, thereby improving water supply reliability and efficiency. The project falls under NAICS code 238220, indicating it is classified as plumbing, heating, and air-conditioning contracting, and is structured as a subcontract under the N.C. Department of Natural and Cultural Resources, Division of Parks and Recreation. The solicitation was posted on July 22, 2026, with a response deadline of August 5, 2026, giving interested parties approximately two weeks to submit proposals. Performance of the work is specifically required at the park in Roaring Gap, with a ZIP code of 28668, and no set-aside preferences have been designated. Although no point of contact information is provided, the agency overseeing the contract is explicitly identified as the state’s Division of Parks and Recreation, emphasizing the public nature and importance of maintaining recreational facility infrastructure. All work must comply with the technical requirements of integrating the new water storage and extraction systems with the current distribution network to ensure operational safety and regulatory compliance.

N.C. Department of Natural and Cultural Resources, Division of Parks and Recreation

POSTED

DEADLINE

Install New 97th IS Air Handling Unit, B301 - Offutt AFB, NEThis solicitation mandates the design and construction of a new independent HVAC system for the 97th Information Squadron at Offutt Air Force Base in Nebraska, under a small business set-aside classified under NAICS code 238220 for Plumbing, Heating, and Air-Conditioning Contractors. All prospective offerors must be registered in the System for Award Management and comply with the Davis Bacon Act wage determination NE-20260059. A mandatory site visit is scheduled for July 20, 2026, at 10:00 AM CDT, with access restricted to Offutt AFB; non-authorized individuals must submit the NCIC Screening and Pass Request Spreadsheet by July 13, 2026, 4:30 PM CDT to request entry, though base access is not guaranteed. Questions regarding the solicitation must be submitted in writing by July 27, 2026, at 1:00 PM CDT, and all responses will be disseminated via official amendment on SAM.gov. Offers are due by August 7, 2026, at 4:30 PM CDT. The contracting office is managed by SSgt Gustavo Davila and SrA Dean White, who serve as the primary and secondary points of contact respectively. The government has clarified that the contractor will be provided and required to generate Controlled Unclassified Information, specifically as-built drawings and structural schematics of Offutt AFB, which must be handled under CMMC Level 2 self-assessment requirements. This certification is mandatory due to tasks involving the secure receipt and storage of base schematics, HVAC system design using restricted technical data, and development of derivative engineering documents. These activities necessitate that the contractor’s unclassified information systems meet cybersecurity standards to protect Department of Defense infrastructure data, and guidance for achieving CMMC Level 2 compliance is provided through official DoD resources.

POSTED

DEADLINE

Medical Vacuum Pump ReplacementThe Department of Veterans Affairs is seeking a certified Service-Disabled Veteran-Owned Small Business to perform the removal of existing Ohio Medical vacuum system components and install three new Ohio Medical vacuum pumps and one control panel at the Olin E. Teague VA Medical Center in Temple, Texas. The work must be completed within 60 days of the Notice to Proceed, following strict compliance with VA Infection Control Risk Assessment protocols including the use of HEPA filtration, barriers, and dust control measures. The scope includes inspecting the existing system, submitting a detailed removal and installation plan to VA Engineering, disconnecting and removing all prior components, installing specified equipment including two new vacuum pumps with motors, a triplex touch screen control panel, temperature switches, and performing comprehensive operational testing for leaks, vacuum performance, alarms, and electrical functions. A written commissioning report must be submitted, along with on-site training for VA maintenance staff and complete OEM operation and maintenance manuals, wiring diagrams, and schematics. The Contractor must provide a minimum 12-month manufacturer’s warranty covering defects in materials and workmanship, with on-site repair or replacement at no cost to the Government. All personnel must pass background checks, present valid government-issued photo ID, be escorted on site, and comply with facility security protocols. Offerors must hold current federal, state, and local trade certifications and be certified as a Small Disadvantaged Veteran-Owned Small Business in the SBA database. The solicitation requires submission of a signed SF-1449, completed VAAR 852.219-75 certification on limitations on subcontracting, an SBA SDVOSB certification, and a capability statement not to exceed three pages detailing technical approach and methodology. Proposals must be submitted via email by July 10, 2026, at 1:00 PM CDT, and all invoices must be submitted exclusively through the Tungsten Network portal at http://www.fsc.va.gov/einvoice.asp with the term “FAST PAY” prominently displayed on invoices and shipping containers. The procurement is a competitive best value selection with technical capability as a pass/fail gate, followed by evaluation of past performance and price reasonableness. The Contracting Officer, Melanie Williams, is located in San Antonio, Texas, and the contract will be administered under FAR and VAAR clauses including whistleblower protections, prohibition of confidentiality agreements, security prohibitions, fast payment procedures, and strict compliance with socioeconomic set-aside requirements.

257-NETWORK Contract Office 17 (36C257)

POSTED

about 7 hours ago

DEADLINE

in 2 days

AI Contract Overview

The contract entails the fabrication and installation of square or round patch plates ranging from 6 to 12 inches in size to repair damaged areas of a tank structure. The work is classified under NAICS code 238220, indicating it falls under the specialty trade contracting category, specifically for structural steel and iron work. The contract is issued as a subcontract under the jurisdiction of Water Engineering in Texas, with a posted date of May 1, 2026, and a final response deadline of June 2, 2026, at 3:00 PM. The place of performance and specific physical location details are not provided, and no set-aside provisions or agency point of contact information are included in the data. All work must be completed in accordance with the technical requirements for patch plate dimensions, material specifications, and installation standards to ensure structural integrity of the tank.

General Info

Fabrication and installation of 6-12 inch patch plates for tank repair, Texas subcontract opportunity.

Agency

Texas → Water EngineeringView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 1

subcontract

Response DeadlineJun 2

Deadline has passed

Submission Closed

06/02/2026, 03:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas → Water Engineering

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas → Water Engineering

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Fabrication and installation of 6”–12” square or round patch plates to repair damaged sections of the tank structure.