Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Pavement Marking & Striping (MMA & Thermoplastic)

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Pavement Marking and Striping involves providing specialized roadway striping services for prime contractors on Caltrans District 3 projects within the Marysville and Sacramento areas. The scope of work includes the application of MMA striping, the restriping of parking stalls with MMA, and the placement of new 6-inch thermoplastic EWNV striping. To ensure proper surface preparation, high-pressure water blasting will be utilized for the removal of existing thermoplastic. All operations must strictly adhere to Caltrans Standard Specification Section 14-8 to deliver high-quality rehabilitated pavement markings. The project is categorized under NAICS code 326130 and is managed by the California Department of Transportation, District 3.

General Info

Subcontract for MMA and thermoplastic pavement marking services on Caltrans District 3 projects.

Agency

California → Caltrans, District 3 - Marysville/Sacramento

NAICS

326130 - Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

Place of Performance

CA

Set-Aside

NONE

Documents

This scope was carved out of HM-4 Safety: Run-Off-Road Prevention, EA 03 4G030, EFIS 0326000092.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 18

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Caltrans, District 3 - Marysville/Sacramento

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Caltrans, District 3 - Marysville/Sacramento

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized roadway striping for prime contractors on Caltrans District 3 projects. Applies MMA striping, restripes parking stalls with MMA, removes existing thermoplastic, and places new 6-inch thermoplastic (EWNV) striping. Utilizes high-pressure water blasting for surface preparation. Must comply with Caltrans Standard Specification Section 14-8. Delivers rehabilitated pavement markings.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E5-27-T-0291

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Manufacture of Nonmetallic Special Shaped Section SealsThis subcontract involves the manufacture of ten nonmetallic special shaped section seals for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is responsible for fabricating NSN 5330-01-500-8725 in accordance with Basic Drawing 53711_6402616 and Reference Drawing 53711_8612484, ensuring full compliance with MIL-PRF-15624H and MIL-STD-2073-1E packaging standards. To be eligible, the manufacturer must utilize asbestos-free materials and maintain either SAE AS9003 or ISO 9001 certification, along with CMMC Level 2 cybersecurity compliance. The work is designated for performance in Bremerton, Washington, under NAICS code 326130, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Nonmetallic Rubber Bushing ManufacturerThis subcontract involves the manufacture and supply of six nonmetallic rubber bushings, specifically NSN 5365-00-598-7845, for prime contractors supporting DLA Weapons Support ASC projects. The production must utilize non-additive processes in strict accordance with Naval Ordnance Systems Command specifications. All deliverables must comply with RP001 packaging, RQ017 marking, and MIL-STD-129 standards. The project is managed under the Department of Defense and requires the supplier to hold CJCP certification as well as ITAR/EAR approval. Performance will take place in San Diego, California. Interested parties must respond by October 30, 2026, regarding this requirement categorized under NAICS code 326130.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Cellular Rubber Sheet SupplierThis subcontract involves the supply of eight cellular rubber sheets, identified by NSN 9320001809995, for prime contractors delivering to the DDSP New Cumberland Facility. The required materials must be 1.0 inch thick, 36 inches wide, and 36 inches long, featuring a smooth finish on both sides. All items must be manufactured or sourced in compliance with the Buy American Act and the Berry Amendment, and must be certified as mercury-free. The supplier is responsible for packaging and marking all materials in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. This procurement falls under NAICS code 326130 and is managed by the Department of Defense. The place of performance is located in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Pavement Marking and StripingThis subcontract for Pavement Marking and Striping involves the application of thermoplastic pavement markings for prime contractors working on road maintenance projects within Alachua County. The scope of work requires the installation of 4-inch and 6-inch solid and skip lines in both white and yellow, ensuring all materials and applications adhere strictly to FDOT standards for resurfaced road sections. Managed by the Florida Public Works agency, the opportunity is categorized under NAICS code 326130. The solicitation was posted on October 21, 2026, with a response deadline set for November 25, 2026.

POSTED

DEADLINE

in about 1 month

Supply of Nonmetallic Special Shaped Rubber SectionsThis subcontract, managed by Construction & Equipment MRO SVC I for the Department of Defense, involves the supply of 142 nonmetallic special shaped rubber sections to support DLA Troop Support contracts. The required components must meet NSN 9390-00-554-9674 and technical standard ASTM D 2000 M 3 BE 610 A14 E014 F19 Z32Z. Performance will take place at Tinker AFB, with all deliverables adhering to NAICS code 326130. The contractor is responsible for manufacturing or sourcing the rubber sections and ensuring all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129. Additionally, the provider must supply Material Safety Data Sheets for any hazardous compounds in accordance with 29 CFR 1910.1200. The response deadline for this requirement is October 30, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Rubber Rod Separator FabricationThis subcontract involves the molding and fabrication of 47,000 rubber rod separators for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The components must be manufactured from Buna-N Nitrile rubber in accordance with material specification MIL-R-6855 Class 1, Grade 60. The project requires the use of industrial rubber molding equipment to produce finished units under NSN 2040010595673. The contract mandates strict compliance with the Berry Amendment and the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must adhere to the timeline established by the October 15, 2026, posting date and the October 26, 2026, response deadline.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

in about 19 hours

Supply of High-Performance Rubber O-Rings (NSN 5331-01-478-9901)This subcontract involves the manufacture or procurement of 507 high-performance rubber O-rings for the DLA Weapons Support Land Supply Chain. The required parts must match NSN 5331-01-478-9901, Apple Rubber P/N AS-568A-248, or Oshkosh Corp P/N 3018994. All supplied materials must be certified as asbestos-free and adhere to strict military standards, specifically MIL-DTL-117 Type II Class C Style 1 for packaging and MIL-STD-129 for marking. The completed and certified units are to be delivered to DLA Distribution San Joaquin in Tracy, California. This requirement falls under NAICS code 326130 and is intended for prime contractors fulfilling Department of Defense supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

in about 19 hours

Manufacture and Supply of Preformed Packing (NSN 5330-01-521-6934)This subcontract involves the manufacture and supply of three preformed packing units, identified by NSN 5330-01-521-6934, for prime contractors supporting the DLA Weapons Support Land Supplier. The selected provider must fabricate the units according to specific technical drawings and ensure all products undergo quality assurance testing in accordance with MIL-STD-1916 or ASQ H1331 standards. The project is managed under the Department of Defense and requires strict adherence to ITAR and EAR compliance regulations. Additionally, the contractor must hold CMMC Level 2 certification to be eligible. The response deadline for this requirement is October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

in about 19 hours

ANG A5 BPA - Purchase of Poly Plates (FY27)The Federal Acquisition Service, under the General Services Administration, has issued a forecast for the ANG A5 BPA regarding the purchase of Poly Plates for fiscal year 2027. This procurement action is intended to establish a Blanket Purchase Agreement to streamline the acquisition of these specific materials. Interested parties may seek further information by contacting Harvelle Fuller, the primary point of contact, or Alex Stutzman, the Small Business Specialist. Additional details regarding the requirement can be accessed through the Acquisition Gateway portal.

Federal Acquisition Service

POSTED

DEADLINE

Butyl Rubber Seal & O-Ring Fabrication (PN 76D41637P1)This small business set-aside subcontract involves the manufacture and supply of preformed butyl rubber packing seals for Department of the Air Force projects. The contractor is responsible for the precision molding and machining of Part Number 76D41637P1, which serves as a critical seal between the mid and aft sections of the MK12A RV. Performance will take place in Ogden, Utah, under the oversight of the Department of Defense agency FA8206 Afsc Pzaca. Key deliverables include one First Article seal, a comprehensive Test Report generated according to DI-NDTI-80809B/T standards, and a Counterfeit Prevention Plan. The contract requires rigorous First Article testing to ensure technical compliance. Interested parties must respond by October 29, 2026, for this specialized fabrication effort categorized under NAICS code 326130.

FA8206 Afsc Pzaca (icbm)

POSTED

DEADLINE

53--MOLDED INSERT

Solicitation # N0010425QFF37

This solicitation is for the procurement of Molded Inserts to be used in crucial shipboard systems. Due to the high risk associated with material failure, these items are designated as Special Emphasis material, requiring strict adherence to quality control, toxicity, and flammability requirements. The contract mandates a comprehensive quality system compliant with ISO-9001 or MIL-I-45208, along with rigorous traceability from raw material to the finished component. All deliverables must be mercury-free and accompanied by a detailed Certificate of Compliance and objective quality evidence. Key administrative details include a response deadline of October 30, 2026, at 4:30 PM EST. The delivery schedule requires the submission of certification data 20 days prior to delivery, followed by a review period and final delivery within 210 days. Government source inspection is required, and all certification documentation must be submitted via Wide Area Workflow for review and acceptance by the Portsmouth Naval Shipyard before any material is shipped. The contract also establishes strict protocols for configuration control, requiring formal Engineering Change Proposals for any modifications affecting form, fit, or function.

Navsup Weapon Systems Support Mech

POSTED

about 2 months ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS