Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Energy was posted on September 12, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

PBN Heating Station

Closed
349702Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333414
New
DIBBS
PIPE, AIR CONDITIONING-
Solicitation # SPE8E8-27-T-0252
Solicitation SPE8E8-27-T-0252 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 951 units of air conditioning and heating pipe. The required material is round, blue annealed steel with a nominal length of 24 inches, identified by NSN 4520002778339 and piece number AA55536-004. The procurement is conducted under NAICS 333414 and utilizes the First Destination Transportation program. Delivery is required within 102 days, with an original required delivery date of October 16, 2026, shipping to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, specifically citing ASTM D3951 for general packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. Inspection and acceptance will occur at the destination. Offerors must comply with the Buy American Act and the Berry Amendment, with specific disclosure requirements for non-domestic materials. Additionally, the solicitation incorporates various FAR and DFARS clauses regarding cybersecurity, the safeguarding of covered defense information, and a price evaluation preference for certified HUBZone Small Business Concerns. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 4 days
NAICS: 333414
New
SLED
Simple Cycle Gauge Panel Heaters
Solicitation # IFQ 1100 BAS1106
Solicitation IFQ 1100 BAS1106 is issued by the City of Austin, Texas, for the procurement of heaters for simple cycle gauge panels. The required equipment must feature a built-in thermostat and meet specific technical specifications, including 750W power, 208V, 1Ph, and 50/60 Hz. Delivery is required FOB Destination to the Austin Energy-Sand Hill Energy Center, with the City emphasizing that time is of the essence. The contract will be awarded to the lowest offer that meets all minimum qualifications and technical requirements. Offers must be submitted via email to Bailie Shotwell by 2:00 PM on November 2, 2026, and must include a price sheet, a signed offer sheet, and any necessary descriptive literature or Safety Data Sheets for hazardous materials to avoid disqualification. The contract is governed by the City of Austin's specific terms and conditions, which include a 30-day payment window and a requirement for contractors to retain records for three years following final payment. The City maintains the right to terminate the contract for convenience and to reject goods that do not meet quality and workmanship standards. Awardees must comply with strict non-discrimination and non-retaliation certifications per Austin City Code, including the completion of Wage Theft Training within 30 days of the award. Additionally, contractors must provide non-discrimination policies on company letterhead and adhere to specific packaging and marking requirements, ensuring all shipments clearly display the City's name, address, contents, and the applicable contract number.
City of Austin

POSTED

about 16 hours ago

DEADLINE

N/A
NAICS: 333414
New
Federal
Cannon AFB - 4625 Boiler
Solicitation # FA485527Q0001
The Department of the Air Force, through the 27th Special Operations Contracting Squadron at Cannon Air Force Base, New Mexico, is seeking a one-time, brand-name purchase of two Lochinvar Armor Condensing Water Heaters, model AWH0500NPM 100. This procurement is designated as a total small business set-aside under NAICS code 333414 and product service code 4520. The equipment is required to replace existing boilers that have reached the end of their operational capacity to ensure continued sanitation and food preparation services for a dining facility. To avoid modifications to existing wiring, venting, and plumbing, the government specifically requires this brand and model. The contract, identified by solicitation number FA485527Q0001, requires delivery to Building 356 at Cannon AFB within 30 days of the order receipt, with delivery timelines under 25 days considered expedited. Award will be granted to the responsible offeror representing the best value, with evaluation based on technical compliance with salient characteristics, total price, and delivery speed. Prospective contractors must be registered in the System for Award Management and submit a complete package including a pricing worksheet, offeror certification, and a conflict of interest statement. Invoicing and payment will be processed electronically via the Wide Area WorkFlow system.
FA4855 27 Socons Lgc

POSTED

about 18 hours ago

DEADLINE

in 7 days

General Info

NAICS

333414 - Heating Equipment (except Warm Air Furnaces) Manufacturing

Place of Performance

Menlo Park, CA, 94025, USA

Set-Aside

NONE

Documents

2

Fixed Price Commercial Supplies and Services Subcontract (Aug 2023)

PDF, High priority: read this firstcontract-document
High

Buy American Act Certification Form

PDF, Low prioritycertification
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor
Contacts1 person available
OfficeMenlo Park, CA, 94025, USA
Office AddressMenlo Park, CA, 94025, USA

Full Description

Show more
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. SLAC has a requirement for a U.S. domestic end item source of the following product: PBN Heating Station for Flag Style Plates with Liner Travel & Rotation Liner travel 100mm retracted length 134mm PBNMD -0100-0134 The award will be made based upon the Lowest Price Acceptable method. Marking of Proprietary/Confidential Information. Offerors shall properly mark and identify with a restrictive legend or information markings on pages of the proposal that contain Proprietary/confidential information. For Offeror to be eligible for a subcontract award with the University and the U.S. Department of Energy (DOE), Offeror shall be registered with the System for Award Management (SAM). Entities may register at no cost directly at the SAM website: https://www.sam.gov. The resulting purchase order shall be performed in accordance with SLAC National Accelerator Laboratory's Terms and Conditions for Fixed Price Commercial Supplies and Services dated December 2016 NOTE: The following documents are attached in this solicitation. Buy American Act Certificate Terms & Conditions for Fixed Price Commercial Supplies and Services, March 2023 Please provide quoted price, delivery, technical compliance statement and certification to the attention of Barbara Garcia. Payment Terms: Net 30 days Freight terms: FOB Destination Prepaid and Add

More opportunities from Department Of Energy → Slac National Accel Labor -Doe Contractor

Same awarding agency

NAICS: 334111
New
Federal
Supermicro 1U rack-mount server assemblies
Solicitation # SLAC_368659_Supermicro_1U_Rack-mount_Server_Assemblies
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for twelve Supermicro 1U rack-mount server assemblies, model AS-1115HS-TNR. Each server must be configured with one AMD EPYC Turin 9255 CPU, 64GB of DDR5 ECC memory (2x 32GB), and a Supermicro DCMS license. Storage options include either no drive or one 240GB SATA drive, and network requirements specify either a 10GbE 4-port RJ45 or a combination of 2x SFP+ and 2x RJ45. This is a product-only procurement with no on-site services permitted. Quotes must be submitted by October 16, 2026, to Cheryl Stafford. The resulting purchase order will be a fixed-price contract with NET-30 payment terms. Source selection will be based on the Lowest Priced Technically Acceptable method and the best lead time. Domestic shipments are FOB Destination Prepaid and Add, while foreign shipments are CIP SLAC, Menlo Park, Duty Unpaid. Offerors must be registered in the System for Award Management and provide a completed Representations and Certifications Rider. Additionally, proposals must include the Harmonized Tariff Schedule code and Export Control Classification Number where applicable. Buy American Act certification is required for unit prices exceeding 15,000 dollars. While not direct Federal procurements, these subcontracts incorporate various FAR and DEAR clauses depending on the final contract value.
Electronic Computer Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 334517
New
Federal
X-ray imaging detector system
Solicitation # SLAC_369006_Xray_Imaging_Detector_System
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for an X-ray imaging detector system. The required equipment includes one XRD 4343CT-F22-C-000 imaging grade digital X-ray detector, an XRD-EPS 215W power supply, and associated AC, DC, extension, and PC connection cables, along with an XRD FG(E) OPTO PCIe Frame Grabber V4. Technical requirements specify a flat-panel detector configuration with an amorphous silicon sensor, a minimum active area of 40 cm x 40 cm, a 150 micron pixel size, and applicability for hard and high-energy X-ray diffraction greater than 20 keV. This is a product-only procurement with no on-site services permitted. Quotes are due by October 16, 2026, and will be evaluated based on the Lowest Priced Technically Acceptable method and the best lead time. The resulting purchase order will be a fixed-price contract with NET-30 payment terms. Domestic shipments are FOB Destination Prepaid and Add, while foreign shipments are CIP SLAC, Menlo Park, Duty Unpaid. Offerors must be registered in the System for Award Management and provide a completed Representations and Certifications Rider. Additionally, proposals should include HTS Codes, ECCNs, and a statement regarding duties and tariffs. Buy American Act certification is required for unit prices exceeding 15,000 dollars. While not direct Federal procurements, these subcontracts incorporate various FAR and DEAR clauses based on contract value thresholds, including specific regulations regarding equal opportunity, whistleblower rights, and export controls.
Irradiation Apparatus Manufacturing

POSTED

7 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 333248
Federal
BL18 In-Vacuum Undulator
Solicitation # 367893(RE)
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting proposals for the design, fabrication, assembly, tuning, and delivery of an In-Vacuum Undulator (IVU) for SSRL BL18. The project requires a U.S. domestic end item source to develop a system including a vacuum sub-system with entrance and exit taper sections, motion control, and a support frame. Technical specifications are governed by SSRL Engineering Note M927, with a reference design based on the BL17 IVU. Key technical requirements include a longitudinal envelope of 3798.3 plus or minus 2.0 mm and specific magnetic period counts depending on the magnet design. The proposal submission deadline is October 30, 2026, at 5:00 PM PDT, with all documentation directed to Ryan Enos. The requested delivery date is 19 months after receipt of order to align with an August 2028 installation window. Award will be based on the combination most advantageous to SLAC, utilizing a price/technical tradeoff and qualitative assessment of factors including past performance, technical design, and financial stability. Required submission documents include firm fixed pricing, a Quality Assurance Plan, a Dun and Bradstreet report, and various representation and certification supplements. Compliance with E-Verify and the Buy American Act is mandatory.
All Other Industrial Machinery Manufacturing

POSTED

24 days ago

DEADLINE

in about 18 hours
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS