Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Phosphate Coating for Metal Components

Active

Federal

Response Deadline09/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, through the Strategic Acq Program Directorate, is seeking a subcontractor to provide phosphate coating services for metal components. These components are essential for the fabrication of military stowage boxes and must be processed in accordance with RQ036 and all applicable engineering specifications. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332812. The solicitation was posted on August 25, 2026, and requires a response by September 9, 2026.

General Info

DoD seeks SDVOSB subcontractor for phosphate coating services for military stowage boxes.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332812 - Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to ManufacturersView NAICS

Place of Performance

USA

Set-Aside

SDVOSBC

Documents

This scope was carved out of SPE7LX-26-U-9716.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOX, ACCESSORIES STOWAG

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 25

subcontract

Response DeadlineSep 9

Submission deadline

Response Deadline

09/09/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide phosphate coating services for metal components used in the fabrication of military stowage boxes, per RQ036 and applicable engineering specifications.

Similar Contracts

Same NAICS industry code

Engraving System

Solicitation # W8486-270864/A

The Department of National Defence is seeking a fully equipped Engraving System including a dual source laser engraver combining CO2 and fibre laser technologies, one mechanical rotary engraver, a dedicated workstation, and associated software under solicitation number W8486-270864/A. The requirement is posted on CanadaBuys for a 30-day period with a response deadline of August 17, 2026, and the equipment must be delivered by December 1, 2026. The goods are classified under GSIN N3611 and UNSPSC 27112718, and the place of performance is the National Capital Region (NCR) in Canada. The Contracting Authority for this procurement is Gabrielle Fugère, reachable at gabrielle.fugere@forces.gc.ca, and the solicitation is issued by the Government of Canada as a federal procurement opportunity with no set-aside provisions indicated.

Department of National Defence

POSTED

DEADLINE

Precision Metal Fabrication & Stamping for Vehicular Radiator Grille

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

NADCAP-Certified Special ProcessesThis subcontract opportunity with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, seeks a provider to perform NADCAP-approved special processes for the manufacturing of aerospace transformers. The required services include specialized tasks such as heat treating, non-destructive testing, and metal coating. The work is designated to be performed at Tinker AFB, zip code 73145-8000, under NAICS code 332812. The solicitation was posted on August 26, 2026, and requires a response by September 3, 2026. Interested parties can find further details through the DIBBS portal using the provided solicitation link.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Manufacturing of Aircraft Structural Support ComponentThis subcontract involves the precision manufacture of a mission-critical aircraft structural support component, identified by NSN 1560-01-643-3018, for the Department of Defense under the ASC Supplier Oper AE and AF Div. The contractor must adhere to strict military specifications regarding material, dimensional, and performance standards, with a mandatory First Article Testing phase required before full production begins. The project is categorized under NAICS code 332812 and will be performed at Tinker AFB in Oklahoma. Interested parties must submit their responses by September 3, 2026, following the solicitation posted on August 26, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Thermal Spray Coating Application

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

Electroplating and Surface Finishing ServicesThis subcontract for Electroplating and Surface Finishing Services is issued by the Department of Defense through the DLA Aviation office in Oklahoma City. The primary objective of the contract is the application of protective coatings, including passivation, anodizing, and cadmium plating, to ensure critical corrosion resistance for components used within aviation fuel system environments. The opportunity is categorized under NAICS code 332812 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of September 27, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

SSTG Lift Rod Thermal Spray

Solicitation # N4523A26Q0016

The Puget Sound Naval Shipyard IMF, acting for the Trident Refit Facility in Bangor, Washington, is soliciting commercial thermal spray services under solicitation N4523A26Q0016. This project involves the repair and modification of ten SSTG Lift Rods provided by NAVIMFACPACNORWEST. The objective is to apply a ceramic coating to the bushing seal area in accordance with EM 841/322M-11 and NAVSEA T9074-AA-GIB-010/1687 to reduce steam leakage and eliminate galling. The selected vendor will be responsible for pre-machining, surface preparation, applying the thermal spray, and rough grinding the coated rods to a diameter of 1.260 to 1.261 inches. This opportunity is a total small business set-aside under NAICS code 332812, with the place of performance located in Bremerton, Washington. Following Amendment 0001, the response deadline has been extended to August 31, 2026, at 8:00 AM PST. Primary coordination for this requirement is managed by Katherine Lauer and Edwin Baldoria.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

Manufacture of Drogue Parachute Fairing

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Phosphate Coating Application (Specialized Finishing)

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Surface Coating and Finishing Services

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

TREAD, METALLIC, NONSKID

Solicitation # SPE7L3-26-T-205G

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE7L3-26-T-205G for the procurement of 17 units of metallic nonskid tread, identified by NSN/Part Number 2540-01-227-8902. This federal requirement is tracked under purchase request 7017776929. The solicitation was posted on August 25, 2026, and the deadline for responses is September 8, 2026. Interested parties can find further details and submit responses through the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

Chrome Plating and CARC Painting of Calibration StandardsThis subcontract opportunity with the Department of Defense, specifically W6QK Acc Wva, requires the application of chrome plating to the internal diameter and Chemical Agent Resistant Coating paint to the external diameter of two out of four calibration standards. All work must be performed in accordance with military finish specifications at the place of performance in Watervliet, New York. The project is designated as a total Small Business Set Aside under NAICS code 332812. Interested parties must submit their responses by the deadline of September 1, 2026, following the posting date of August 25, 2026.

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

Solicitation # SPE7LX-26-U-9554

Solicitation SPE7LX-26-U-9554 is a total small business set-aside for the procurement of plain seals, identified by NSN 5330-01-576-3089 and part number A18-57398-000. Issued by the Department of Defense Strategic Acquisition Program Directorate, this is a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars and a guaranteed minimum quantity of 3 units. The estimated quantity is 21 units with a delivery requirement of 97 days after receipt of order. The contract is FOB Origin, though inspection and acceptance will occur at the destination. Technical requirements mandate that items be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1 to prevent UV deterioration. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Hazardous materials must be labeled according to 29 CFR 1910.1200 and IP025 guidelines. Administrative compliance includes electronic submission of payment requests via Wide Area WorkFlow and adherence to DFARS cybersecurity and telecommunications restrictions. Proposals are due by August 26, 2026, via the DLA BSM portal.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

CABLE, INPUT, AIRCRAF

Solicitation # SPE7LX-26-U-9456

This solicitation, issued by DLA Land and Maritime under number SPE7LX-26-U-9456, is a Request for Quotations for a one-year Indefinite Delivery Contract (IDC) to procure aircraft input cables (NSN 6130-01-562-5471). The contract is designated as a Small Business Set-Aside with a maximum contract value of $350,000. While the estimated annual quantity is 12 units, the contract includes a guaranteed minimum of 1 unit and a minimum delivery order quantity of 3 units. Quotations must be submitted via the DLA-BSM Internet Bid Board System (DIBBS) by the deadline of August 25, 2026. The procurement is subject to rigorous technical, quality, and security standards. Contractors must comply with CMMC Level 2 Self-Assessment and safeguard covered defense information. Quality assurance involves specific sampling methods such as MIL-STD-1916 or ASQ H1331, with strict attribute verification levels for critical, major, and minor characteristics. Packaging must adhere to ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Additionally, the contract mandates compliance with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment, and prohibits the intentional addition of mercury to hardware. Delivery is required within 77 days after order receipt, with inspection and acceptance occurring at the destination.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

CONTROL ASSEMBLY, TRANS

Solicitation # SPE7LX-26-U-9550

This solicitation, issued by DLA Land and Maritime Strategic Acquisition Program Directorate, is a Request for Quotations for an Indefinite Delivery Contract regarding a Transmission Control Assembly. The procurement is for NSN 2520-01-644-3979, specifically part number A5900WP3 manufactured by Allison Transmission Inc. This is a restricted source item that requires engineering source approval from the Government design control activity. The contract is a small business set-aside with an estimated annual quantity of 123 units and a guaranteed minimum of 18 units. The maximum contract value is capped at $350,000. Quotations are due by August 26, 2026, and the delivery requirement is set at 81 days after order acknowledgment. The contract incorporates rigorous technical, quality, and environmental standards. Contractors must adhere to the DLA Master List of Technical and Quality Requirements and are strictly prohibited from using Class I ozone-depleting chemicals. Packaging must comply with RP001 and FED-STD-313, with specific instructions for hazardous versus non-hazardous materials, while all marking and labeling must follow MIL-STD-129. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Additionally, the contract includes various federal regulations regarding cybersecurity, combating trafficking in persons, and domestic sourcing compliance, such as the Buy American Act.

Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

CONNECTING LINK, RIGID

Solicitation # SPE7LX-26-R-0029

Solicitation SPE7LX-26-R-0029 is a federal request for the procurement of a rigid connecting link, identified by NSN 3040-01-271-9547. Issued by the Department of Defense Strategic Acquisition Program Directorate, this opportunity is designated as a Total Small Business Set-Aside. The response deadline for this solicitation is September 28, 2026. Offerors must adhere strictly to the Product Item Description and the associated packaging and marking requirements, which remain in effect for the duration of the contract unless modified by the Contracting Officer. To be considered, bidders must complete all required contractor fill-ins within the solicitation body and fully address the Pricing and Delivery spreadsheet attachment.

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Solicitation # SPE7LX-26-U-9559

Solicitation SPE7LX-26-U-9559 is an Indefinite Delivery Contract (IDC) issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of gaskets (NSN 5330-01-054-9794). This total small business set-aside under NAICS 339991 has an estimated annual quantity of 88 units across approximately four orders per year, with a guaranteed minimum quantity of 13 units once the contract becomes binding. The contract has a maximum value ceiling of 350,000 dollars and a delivery requirement of 97 days after receipt of order, with shipping terms set as FOB Destination. The contract mandates strict adherence to military standards for packaging, marking, and preservation, including MIL-STD-129, MIL-STD-130N, and MIL-STD-2073-1E. Specific requirements include the use of MIL-DTL-117 for UV-sensitive materials and compliance with CMMC Level 2 cybersecurity standards. Technical data is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Inspection and acceptance are conducted by the government at the destination. Invoicing and payment must be processed through the Wide Area WorkFlow (WAWF) system. Quotations are due by August 27, 2026, via the DLA-BSM Internet Bid Board System.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9561

This solicitation, issued by DLA Land and Maritime Strategic Acquisition Program Directorate, is a Request for Quotations for an Indefinite Delivery Contract (IDC) to acquire Access Covers (NSN 5340-01-527-0114). The procurement is designated as a Total Small Business Set-Aside with an estimated maximum contract value of $350,000 and an estimated annual quantity of 10 units. The contract is intended for a one-year period, and although the solicitation mentions a delivery timeframe of 135 days, it is governed by the First Destination Transportation program with FOB Destination terms, while requesting that offers be submitted based on FOB Origin. The contract includes stringent technical, security, and environmental requirements. Contractors must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 standards and DFARS 252.204-7012 for safeguarding covered defense information. Technical data may be subject to ITAR or EAR export controls, requiring specific certifications for access. Quality assurance is critical, requiring manufacturers to maintain at least ISO 9001:2015 certification and adhere to specific zero-based sampling plans. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and mandates strict adherence to DLA packaging, marking (MIL-STD-129), and hazardous material labeling standards. Compliance with the Buy American Act and the Berry Amendment is also required.

Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9558

This solicitation, issued by DLA Land and Maritime Strategic Acquisition Program Directorate, is a Request for Quotations for an Indefinite Delivery Contract (IDC) to procure Angle Brackets (NSN 5340-01-102-3483). The procurement is a Total Small Business Set-Aside with a maximum contract value of $350,000. The estimated annual demand is 7 units, and the contract is intended for a one-year period. Quotations must be submitted by August 27, 2026, to Theodore Misiolek. The contract includes specific technical requirements, including adherence to drawings 19207 12344344 and 19207 12310688, and technical specification MIL-DTL-12560L(1). Key compliance and administrative requirements include strict adherence to export control regulations (ITAR/EAR), necessitating approved US/Canada Joint Certification Program certification for access to technical data. Contractors must comply with various domestic material restrictions, such as the Buy American Act and the Berry Amendment, and are prohibited from using additive manufacturing unless specifically authorized. Packaging and marking must follow MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. Additionally, the contract incorporates cybersecurity requirements, including NIST SP 800-171 assessment requirements and safeguarding covered defense information. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

CLEVIS, ROD END

Solicitation # SPE7LX-26-U-9563

This solicitation, issued by DLA Land and Maritime under solicitation number SPE7LX-26-U-9563, is a Request for Quotations for an Indefinite Delivery Contract to procure Clevis, Rod End components (NSN 5340-01-597-8698). The procurement is a total small business set-aside with a maximum contract value of $350,000. While the estimated annual quantity is 52 units, the contract includes a guaranteed minimum of 7 units. The specific part number identified is Daimler Truck North America LLC 64678 P/N TDA R810023. Delivery is required within 116 days of order, with terms set as FOB Origin and inspection and acceptance occurring at the destination. Technical and quality compliance is strictly governed by the DLA Master List of Technical and Quality Requirements. Packaging must adhere to specific standards: non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with TQ requirement IP025 per FED-STD-313. All packaging and marking must meet MIL-STD-129, and palletization must follow RP001 requirements. The contract incorporates various federal and defense regulations, including cybersecurity safeguarding for covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act. Offerors must submit quotations via the DLA DIBBS portal by the specified deadline, ensuring all representations regarding small business status and covered telecommunications are completed.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9565

This Request for Quotations (RFQ) issued by DLA Land and Maritime is for a one-year Indefinite Delivery Contract (IDC) to procure TEE, GRAME, identified by NSN 5340-01-603-1496. The solicitation is a Total Small Business Set-Aside with a contract maximum value of $350,000. While the estimated annual quantity is 56 units, the contract includes a guaranteed minimum of 8 units. Quotations must be submitted via the DIBBS portal by the deadline of August 27, 2026. The procurement is subject to various domestic material restrictions, including the Buy American Act and the Berry Amendment, and requires offerors to disclose if any non-domestic materials are being proposed. Technical and quality requirements are governed by the DLA Master List, and specific packaging standards apply based on the material's hazardous status. Non-hazardous items must follow ASTM D3951, while hazardous materials must comply with TQ requirement IP025 and include proper hazard warning labels and Material Safety Data Sheets. All packaging and marking must adhere to MIL-STD-129, and palletization must meet RP001 standards. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Contractors are required to use the Wide Area WorkFlow (WAWF) system for electronic invoicing and must comply with stringent cybersecurity and safeguarding requirements for covered defense information.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

SHAFT, SHOULDERED

Solicitation # SPE7LX-26-U-9557

This solicitation, issued by DLA Land and Maritime under number SPE7LX-26-U-9557, is a Request for Quotations for an Indefinite Delivery Contract (IDC) to procure Shouldered Shafts (NSN 3040-00-200-1392). The contract is intended for a one-year period with a maximum value of $350,000 and an estimated annual quantity of 15 units. Deliveries are required FOB Origin within 151 days of an order, with both inspection and acceptance occurring at the destination. The procurement falls under NAICS code 333613, and the contract incorporates strict cybersecurity requirements, specifically the CMMC Level 2 Self-Assessment, and mandates the safeguarding of covered defense information. Contractors must adhere to rigorous technical and quality standards, including specific sampling methods such as MIL-STD-1916 or ASQ H1331 to ensure zero non-conformances in sample lots. Packaging and marking must strictly comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001), with specific instructions for preservation, cushioning, and palletization. Additionally, the contract is subject to domestic sourcing restrictions, including the Buy American Act and the Berry Amendment, and requires compliance with hazardous material labeling standards. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

CHANNEL, LIFT, VEHICL

Solicitation # SPE7LX-26-U-9564

This solicitation, issued by DLA Land and Maritime Strategic Acquisition Program Directorate, is a Request for Quotations for an Indefinite Delivery Contract regarding the procurement of Vehicle Lift Channels (NSN 2540-01-576-6731). The contract is designated as a Total Small Business Set-Aside with an estimated annual quantity of 18 units and a maximum contract value of $350,000. Quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by the deadline of August 27, 2026. The procurement is subject to a one-year period of performance, with a required delivery lead time of 80 days from the order date. The contract includes stringent technical, quality, and packaging requirements. All packaging and marking must comply with MIL-STD-129, and palletization must follow DLA packaging requirements (RP001). If materials are deemed hazardous under FED-STD-313, they must be packaged according to TQ requirement IP025 and labeled in accordance with the Hazard Communication Standard. Delivery terms are FOB Origin under the First Destination Transportation program, with inspection and acceptance occurring at the destination. Contractors are required to use the Wide Area Workflow (WAWF) system for all invoicing and receiving reports. Additionally, the contract incorporates essential federal regulations, including the Buy American Act, cybersecurity safeguarding requirements for covered defense information, and compliance with anti-trafficking provisions.

Other Motor Vehicle Parts Manufacturing

POSTED

about 18 hours ago

DEADLINE

INSTALLATION KIT, VEHIC

Solicitation # SPE7LX-26-Q-0043

POSTED

about 18 hours ago

DEADLINE