This Award Notice opportunity from Department Of Defense was posted on October 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PIN, LOCK

Awarded

SPE4A626PG767Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A6-27-R-X216

Solicitation SPE4A6-27-R-X216 is a total small business set-aside for the procurement of cotter pins (NSN 5315-01-568-8946) by the Defense Logistics Agency Weapons Support ASC Commodities Division. The contract is structured as a Firm Fixed Price Indefinite Delivery Contract with a five-year base period and a maximum dollar value of 350,000.00. The primary requirement is for 1,197 units, with an estimated annual quantity of 886 units and delivery expected 143 days after order. Inspection and acceptance are both conducted at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and RP001 for palletization, while ASTM D3951 governs general packaging, though the DLA Master List of Technical and Quality Requirements takes precedence. Award decisions are based on best value, with a heavy emphasis on past performance, specifically SPRS assessments and delivery schedule compliance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including NIST SP 800-171 cybersecurity assessments and a one-year warranty from the date of delivery.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Filter Disk Fabrication

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Close Tolerance Screw ManufacturingThis subcontract involves the manufacture and supply of 2,072 close-tolerance screws for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The project requires the fabrication of precision fasteners under part number ST3M557-4-4, strictly adhering to Reference Drawing NR 76301 ST3M557, Revision L. Due to the nature of the components, the manufacturer must utilize precision machining and forming equipment to ensure all units meet Critical Application Item quality standards. The performance of this contract is centered at Hill AFB, zip code 84056-5734, and falls under NAICS code 339993. The solicitation was posted on November 12, 2026, with a response deadline of November 20, 2026. The primary objective is the successful delivery of the specified quantity of high-precision fasteners to support ongoing weapons support contracts.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machining and Assembly of Turnlock FastenersThis subcontract involves the precision machining and assembly of 104 Turnlock Fastener Assemblies for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The manufacturer is responsible for fabricating these components using CNC precision machining and turning in strict accordance with NASM17731 and NASM22978 part standards and TDP Rev B Gen 2. Due to the nature of the components, the work must adhere to Critical Application Item protocols. To be eligible, the contractor must maintain SAE AS9003 or ISO 9001 certification and ensure full DFARS cybersecurity compliance. The performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Hexagon Head Cap Screw SupplyThis subcontract involves the supply of new, non-remanufactured hexagon head cap screws, specifically Oshkosh Defense LLC part number 3271564, to support prime contractors delivering on DLA supply contracts. The provider is responsible for manufacturing or sourcing fasteners that strictly adhere to technical specifications and the DLA Master List of Technical and Quality Requirements. Compliance is mandatory regarding RP001 packaging, ASTM D3951, and MIL-STD-129 marking standards. Additionally, the contractor must meet cybersecurity and data protection requirements outlined in DFARS 252.204-7012 and NIST SP 800-171. This requirement is issued under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Close Tolerance Screw ManufacturingThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the manufacture and delivery of 778 close tolerance screws for prime contractors. The fasteners must be produced to strict specifications, specifically requiring that Class 3A and 3B threads undergo dimensional conformance inspection in accordance with System 22 of FED-STD-H28/20. To ensure structural integrity and precision, the use of additive manufacturing processes is strictly prohibited. The selected provider must maintain a quality management system that complies with either SAE AS9003 or ISO 9001 standards. Performance for this contract will take place at Robins Air Force Base. Interested parties should note the response deadline of November 20, 2026, for this specialized manufacturing requirement under NAICS code 339993.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Solid Rivets (NAS1097U3-8)This subcontract involves the supply of 715 units of NAS1097U3-8 solid rivets to prime contractors supporting the DLA Weapons Support ASC Commodities Division. These components are designated as Critical Application Items and must be manufactured in strict accordance with NAS1097 and NAS5674 standards. Quality assurance is maintained through inspection methods per MIL-STD-1916, while all marking and labeling must comply with MIL-STD-129. The contract requires full adherence to the Berry Amendment and the Buy American Act to ensure domestic sourcing. Performance for this requirement is centered in Tracy, California, under NAICS code 339993. The procurement process is managed by the Department of Defense with a response deadline set for November 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Close Tolerance Screw Manufacturing and SupplyThis subcontract involves the manufacture and supply of close-tolerance screws for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The contractor is responsible for producing 80 units of screws according to DLA Master List specifications using precision machining equipment. All products must be delivered to Hill AFB and accompanied by the necessary Safety Data Sheets. Strict adherence to quality and regulatory standards is required, including certification via SAE AS9003 or ISO 9001. Packaging must comply with ASTM D3951, while marking and labeling must follow MIL-STD-129 and MIL-STD-130N. Additionally, the contractor must ensure full compliance with the Buy American Act and the Berry Amendment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Turnlock Fastener Stud Assembly ManufacturingThis subcontract involves the manufacture of 1,557 Turnlock Fastener Stud Assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. Production must strictly adhere to Basic Drawing NR 81205 BACS21ED and Reference Drawing NR 98752 200415485, with a specific prohibition against the use of additive manufacturing processes. All finished assemblies are required to be packaged in accordance with MIL-STD-2073-1E and performed at Robins Air Force Base. To qualify, manufacturers must maintain SAE AS9003 or ISO 9001 quality systems and hold CMMC Level 2 certification. The opportunity is categorized under NAICS code 339993. Interested parties must respond by November 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Quick Release Pins (NSN 5315007024879)This subcontract involves the supply of 22 specialized quick release pins for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing pins that strictly adhere to the metallurgical and dimensional standards of NSN 5315007024879. Compliance with specific operational standards is required, including packaging per RP001, marking per RQ017, and quality control per RQ011. The project is categorized under NAICS code 339993 and will be performed in New Cumberland. To successfully manage the contract, the provider must be proficient in the DIBBS system for all quote submissions and delivery management. The response deadline for this requirement is November 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # W911S227U0169

Solicitation W911S227U0169 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the acquisition of new hardware components for United States Military Academy uniforms. The scope of work focuses on the procurement of buttons and hat hardware, including collar clasps, shako hooks, and tuck company buttons. All items must be new equipment, as used or remanufactured products are strictly prohibited. Key technical requirements mandate adherence to specific military standards, including MIL SPEC -DTL-1563/8D, MIL SPEC -DTL-1563/20D(IH), and MIL SPEC -DTL-01563C. The procurement is designated as a Total Small Business Set-Aside under NAICS code 339993. The government will award the contract to the responsible offeror whose proposal is most advantageous based on price and technical evaluations. This is a brand name or equal solicitation, meaning equal products must meet all salient physical and functional characteristics and be supported by descriptive literature. Deliveries are expected within 30 days on an F.O.B. destination basis. All quotes must be submitted via the PIEE Solicitation module, and offerors must include a completed certification of country of origin to avoid being rejected as nonresponsive. Payment will be processed through the Wide Area Workflow and Electronic Funds Transfer systems.

POSTED

DEADLINE

Supply of Straight Threaded PinsThis subcontract involves the manufacture or sourcing of 752 straight threaded pins for prime contractors working on government hardware contracts. The items must strictly adhere to the technical specifications associated with NSN 5315005970624. Additionally, the provider is required to supply Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The contract is issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division under NAICS code 339993. Performance for this contract will take place in San Diego, California. The solicitation was posted on November 11, 2026, with a response deadline set for November 19, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

Contract SPE4A626PG767 was awarded by the Defense Logistics Agency on October 14, 2026, to Argo Spring Manufacturing Co., Inc. for the procurement of lock pins and associated contractor first article testing. The award was managed through the Department of Defense and posted via the DIBBS system. However, Modification P00002 issued by DLA Weapons Support subsequently cancelled the purchase order at no cost to the government. This action was taken because the required delivery date of September 17, 2026, was not met. As a result, the value of CLIN 0001 was decreased by 7,364.40 dollars, reducing the total contract value to zero dollars.

General Info

DLA cancelled Argo Spring Manufacturing's lock pin contract due to missed delivery dates.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

339993 - Fastener, Button, Needle, and Pin Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

modification

High

amendment

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedOct 14

Award Notice

AwardedNov 13

Contract was awarded

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

ContactsNo contact information available

Full Description

DLA award SPE4A626PG767 posted on DIBBS. Awardee: ARGO SPRING MANUFACTURING CO., INC. (CAGE 30391) Total Contract Price: See Award Doc Award Date: 10-14-2026 Line items: - PIN, LOCK (NSN/Part 5315010338872) - CONTRACTOR FIRST ARTICLE TEST (NSN/Part 0001S00000053)