Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, QUICK RELEASE

Active
SPE4A6-26-T-28AYFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one quick release pin, identified by NSN 5315-00-878-5959 and part number NAS1355DS7S20D. The item must be manufactured according to the current revision of the applicable non-government standards, specifically NAS1353 through 1366 and NAS1332. Delivery is required within 20 days after order, with the final destination being Minot AFB in North Dakota. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, as well as DLA packaging requirements for procurement. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots. Shipping must be conducted via traceable means, and the contract specifies a zero percent quantity variance.

General Info

Procurement of one quick release pin for delivery to Minot AFB within 20 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

341 BOMBER BLVD BLDG 527, MINOT AFB, ND, 58705-5001, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-28AY.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Ahoefa Simons De Fanti
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,QUICK RELEASE
PIN, QUICK RELEASE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
TDP Rev B Gen 2 IAW BASIC NON GOVT STD NAS1353 THRU 1366 REVISION NR 8 DTD 02/28/2025 PART PIECE NUMBER: P/N NAS1355DS7S20D
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD NAS1332 REVISION NR 9 DTD 10/31/2012 PART PIECE NUMBER:
SPE4A6-26-T-28AY
SECTION B
PR: 7018185548 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018185548 0001 EA 1.000
NSN/MATERIAL:5315008785959
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB4528
FB4528 5 LRS LGRMR
CP 701 723 6106
341 BOMBER BLVD BLDG 527
MINOT AFB ND 58705-5001
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4528
FB4528 5 LRS LGRMR
CP 701-723-6106
341 BOMBER BLVD BLDG 527
MINOT AFB ND 58705
US
M/F: (TCN) FB452862400126
RDD:
PROJ: TP 3
SUPP ADD: SIG: A
SPE4A6-26-T-28AY
SECTION B
PR: 7018185548 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 11
DIC: A0A DIST: 01 ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:09/02/2026
SPE4A6-26-T-28AY NSN/Part Number: 5315-00-878-5959 Quantity: 1 EA Purchase Request: 7018185548QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-25BD
Solicitation SPE4A6-26-T-25BD, issued by the DLA Aviation ASC Commodities Division on September 1, 2026, is a total small business set-aside under NAICS code 332618 for the procurement of 105 quick release pins. Identified as critical application items, the required parts correspond to Avibank Mfg. Inc. P/N ADP305-1 or SPS Technologies LLC P/N SL55067. The contract specifies a delivery timeline of 105 days after order, with a need ship date of December 23, 2026, and a final required delivery date of March 11, 2027. Delivery and inspection are set as FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to rigorous quality and technical standards, including MIL-STD-1916 and MIL-STD-105/ASQ Z1.4 for sampling and inspection, with a requirement for zero non-conformances in sample lots. Packaging and marking must adhere to MIL-STD-129 and MIL-STD-2073-1E, alongside specific DLA requirements for packaging and bare item marking. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with CMMC Level 2 self-assessment. Additionally, the contract mandates adherence to the Buy American Act and Berry Amendment for domestic sourcing, as well as various DFARS and FAR clauses regarding cybersecurity, hazardous materials, and the prohibition of certain telecommunications equipment.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADLESS
Solicitation # SPE4A7-26-T-726Q
This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Division, is for the procurement of four headless grooved pins under NSN 5315-01-669-8148. The contract requires delivery within 171 days after receipt of order and is categorized under NAICS code 332618. Performance is designated for New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality standards as defined by the DLA Master List, including specific packaging requirements and the removal of government identification from non-accepted supplies. Notably, the contract involves covered defense information and is subject to ITAR and EAR export controls. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed Department of Defense export-control training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-08F5
This contract is for the procurement of one O-ring, identified by NSN 5331-01-471-6187 and Caterpillar part number 0773064. The delivery is required within five days after order, with the shipment destined for Joint Base Elmendorf Richardson in Alaska. The agreement specifies a zero percent quantity variance and designates the point of inspection and acceptance at the destination. The supplier must adhere to strict technical and quality requirements, including the prohibition of class I ozone depleting chemicals and the intentional addition of mercury. Due to the potential for ultraviolet ray deterioration, the item must be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117. Additionally, the contractor is required to maintain supply chain traceability documentation and follow specific DLA packaging and marking standards.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
LINK, CHAIN, END
Solicitation # SPE4A5-26-T-415P
This contract is a solicitation for the procurement of 35 units of end chain links, identified by NSN 4010-99-174-5741 and Pearson Engineering Limited part number PE23155. The agreement is issued by the Department of Defense under solicitation number SPE4A5-26-T-415P. Delivery is required within 171 days, with a need date of March 8, 2027, and shipping is designated as FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Technical and quality requirements are further defined by the DLA Master List, and the contract specifies that inspection and acceptance will occur at the destination.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-24WA
This contract is for the procurement of one retaining pin, identified by NSN 5315-01-455-2626 and part number HM-46 from Rentfrow, Incorporated. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-24WA, with a required delivery date of August 21, 2026, and a delivery timeframe of five days. The item is designated as a critical application item and must be shipped FOB Origin to the Naval Air Support Equipment Facility in San Diego, California, using the fastest traceable means. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for source approval, packaging, and item marking. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with zero non-conformances required for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 requirements. Inspection and acceptance will take place at the destination.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
PIN, SPRING
Solicitation # SPE4A6-26-T-14CL
This contract is for the procurement of 15 spring pins, identified by NSN 5315-01-737-3711 and part number 9510-003. The items are designated as critical application items and must be manufactured according to the Velan Valve United States OPCO technical drawing and TDP Rev A Gen 2. Delivery is required by April 29, 2027, with a delivery window of 257 days. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Additionally, the supplier must comply with environmental restrictions prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required by specified systems.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-27JN
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 82 headless straight pins under National Stock Number 5315-00-119-9341. The contract requires delivery within 171 days after the order is received and specifies performance at Hill AFB. The procurement is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be shared with foreign persons without prior authorization from the Department of State or Commerce. Eligible contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-controlled technical data training and questionnaires to access the necessary data.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, SHOULDER, HEADLE
Solicitation # SPE4A6-26-T-25FM
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-25FM, is for the procurement of 20 headless shoulder pins identified by NSN 5315-00-908-9364. The contract requires delivery within five days after receipt of order and falls under NAICS code 332618. Quotations are due by September 8, 2026, and must be submitted via the DIBBS electronic system. The procurement is subject to strict technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DOD export-control training to access the data.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADLES
Solicitation # SPE4A6-26-T-27HB
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-27RN
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A7-26-T-725E
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
KEY, MACHINE
Solicitation # SPE7L4-26-U-1235
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335931
New
DIBBS
Manufacture and Supply of Special Purpose Electrical Cable Assemblies (NSN 5995-01-113-6852)
Current-Carrying Wiring Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWER, E
Solicitation # SPE4A6-26-T-28AU
This contract is for the procurement of 27 electrical power cable assemblies under solicitation number SPE4A6-26-T-28AU for the Department of Defense. The items are identified by NSN 6150-01-736-3850 and are associated with purchase request 7018247687. Delivery is required within 171 days after the order, with a need ship date of March 8, 2027, and an original required delivery date of July 2, 2027. The terms specify that delivery, inspection, and acceptance will all occur at the point of origin. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with a specific prohibition on the use of mercury or mercury compounds. The final destination for the shipment is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SPACER, BALL
Solicitation # SPE4A6-26-T-24RC
This contract is a solicitation for the procurement of 313 ball spacers, identified as NSN 1440-00-961-5057 and Boeing part number 29-13703-3. The item is designated as a critical application item. Delivery is required within 81 days after order, with a need ship date of November 29, 2026, and an original required delivery date of December 4, 2027. The shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 standards for manufacturers. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Quality assurance and sampling must be conducted according to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Inspection and acceptance will occur at the destination.
Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-27HP
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of one machine screw, identified by NSN 5305-01-722-7744. The contract requires delivery within 20 days after receipt of order and specifies that the place of performance is in Mechanicsburg, Pennsylvania. The contractor must adhere to strict quality and security standards, including CMMC Level 2 certification and compliance with DLA packaging and marking requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 standards. Additionally, the item is subject to ITAR and EAR export controls, requiring the contractor to have an approved US/Canada Joint Certification Program certification and completed export-control training to access technical data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-27KW
This contract is for the procurement of 158 machine screws under NSN 5305006196447. The items are designated as critical application items and must adhere to specific technical standards, including NAS623 Revision 8 and NAS498 Revision 14. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a strict requirement for zero non-conformances in sample lots unless otherwise specified. Delivery is required within 535 days, with a need ship date of March 6, 2028, and a final delivery date of March 14, 2028. The items are to be shipped FOB Origin to DLA Distribution Jacksonville, Florida. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination.
Nonferrous Forging

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-27YR
This solicitation, numbered SPE4A6-26-T-27YR, is issued by the Department of Defense ASC Commodities Division for the procurement of 138 socket head cap screws under NSN 5305-01-661-2446. The contract is designated as a Total Small Business Set-Aside with a delivery requirement of 171 days after the order is placed. Performance is centered in New Cumberland, Pennsylvania, under NAICS code 332722. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and physical item marking. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract requires CMMC Level 2 certification and strict compliance with ITAR and EAR export controls, limiting the distribution of technical data to approved contractors with US/Canada Joint Certification Program certification.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
THERMOCOUPLE, IMMERSION
Solicitation # SPE4A6-26-T-24TL
This contract is for the procurement of two immersion thermocouples, identified by NSN 6685-01-321-3326 and part number TC45000-1 from Semco Instruments, Inc. The order is managed by the ASC Commodities Division of the Department of Defense under solicitation SPE4A6-26-T-24TL. Delivery is required within five days, with FOB, inspection, and acceptance all occurring at the point of origin. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 for marking, while specifying that Item Unique Identification is not required. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Technical and quality standards are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, POWER, E
Solicitation # SPE4A6-26-T-28CL
This contract is for the procurement of one electrical power cable assembly, identified by NSN 5995-01-671-3482 and part number 90-005-0021-12 from SATCOM and Antenna Technologies Inc. The item is designated as a critical application item and requires adherence to specific DLA technical and quality requirements, including physical identification and bare item marking. The material has no shelf life requirement, and sampling must comply with MIL-STD-1916 or ASQ H1331. Delivery is required within five days of order, with the original required delivery date set for September 3, 2026. The shipment is FOB Origin and will be inspected and accepted at the destination. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with palletization adhering to DLA packaging requirements. The final delivery destination is the Commanding Officer at Cherry Point, North Carolina.
Current-Carrying Wiring Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-27ZD
This contract, identified as solicitation SPE4A6-26-T-27ZD, is issued by the Department of Defense ASC Commodities Division for the procurement of 162 plain hexagon nuts under NSN 5310-01-675-7527. The delivery is required within 171 days after the order, with a need ship date of March 8, 2027, and an original required delivery date of April 20, 2027. The shipment is designated as FOB Origin, with both inspection and acceptance occurring at the destination. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Additionally, the contract prohibits the use of mercury or mercury compounds in the preservation, packaging, and marking processes. There is no quantity variance permitted for this order.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-26-T-27HV
This contract, identified as solicitation SPE4A6-26-T-27HV, is for the procurement of 1,343 self-locking plate nuts under NSN 5310-01-054-0840. The order is issued by the Department of Defense through the ASC Commodities Division with a required delivery timeframe of 83 days after receipt of order. Performance is designated for San Diego, California. The agreement mandates strict adherence to quality and security standards, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Technical and quality requirements are governed by the DLA Master List, and sampling must follow MIL-STD-1916 or ASQ H1331. Additionally, the contract requires specific physical identification marking, DLA packaging standards, and strict configuration change management protocols.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
BUS, CONDUCTOR
Solicitation # SPE4A6-26-T-27WT
This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of one conductor bus, identified as a commercial off the shelf item under NSN 6150-01-559-9742. The contract requires delivery within 171 days after the order is placed and specifies that the item must be delivered to New Cumberland, Pennsylvania. The agreement includes strict adherence to DLA master lists for technical and quality requirements, as well as specific packaging and documentation standards for source approval requests. It explicitly prohibits the intentional addition of mercury or mercury containing compounds, except in specific functional cases like batteries or sensors. Additionally, the contract notes that covered defense information applies and that item unique identification is not required for this specific service customer.
Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-27UP
This contract for PIN-RIVET (NSN 5320-01-477-5839) involves the procurement of 31 units under solicitation SPE4A6-26-T-27UP. The agreement specifies a delivery timeframe of 171 days after the order, with a required delivery date of November 23, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance is governed by tailored higher level requirements, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. The item is designated as a critical application item, with approved part numbers and manufacturers including The Boeing Company, Fastener Innovation Technology, and Howmet Global Fastening Systems, among others.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS