Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

PIN, QUICK RELEASE

Active
SPE4A6-27-T-6025Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-27-T-6025, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 45 quick release pins (NSN 5315012806564). The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of April 20, 2027, and a final required delivery date of June 15, 2027. Delivery, inspection, and acceptance are all established as FOB Origin. The procurement is not a small business set-aside, although a price evaluation preference is available for SBA-certified HUBZone small business concerns. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, with specific adherence to ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Quality assurance involves inspection at the origin using zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, and Certificate of Conformance procedures under FAR 52.246-15 are authorized. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and strict compliance with domestic sourcing regulations, including the Buy American Act and the Berry Amendment.

General Info

DLA procurement of 45 quick release pins for delivery by June 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332510 - Hardware Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1

RFQ SPE4A6-27-T-6025

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
Christina Pyle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,QUICK RELEASE
PIN, QUICK RELEASE
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SPE4A6-27-T-6025
SECTION B
TDP Rev B Gen 2 IAW BASIC DRAWING NR 18876 11458408 REVISION NR DTD 06/06/1978 PART PIECE NUMBER: 11458408
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 18876 11458270 REVISION NR B DTD 01/04/1983 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 18876 11458408 REVISION NR A DTD 12/08/1982 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 18876 11458408 REVISION NR DTD 03/22/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018834967 0001 EA 45.000
NSN/MATERIAL:5315012806564
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
SPE4A6-27-T-6025
SECTION B
PR: 7018834967 PRLI: 0001 CONT’D
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:04/20/2027 Original Required Delivery Date:06/15/2027
SPE4A6-27-T-6025 NSN/Part Number: 5315-01-280-6564 Quantity: 45 EA Purchase Request: 7018834967QTY: 45 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
Federal
53--HOIST STRAP
Solicitation # N0010426QAB90
This fixed-price solicitation, number N0010426QAB90, is issued by the Navsup Weapon Systems Support Mech for the manufacture and procurement of three hoist strap assemblies, part number 5641754-303, under CAGE code 53711. The contract is a total small business set-aside and requires the contractor to adhere strictly to the regulations and specifications detailed in drawing 5641754 REV_E. Delivery is required within 90 days on an FOB destination basis. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations considering item, price, and supplier risk via SPRS assessments. Quality assurance is a critical component of this requirement, necessitating government source inspection per FAR 52.246-2 and the maintenance of inspection records for 365 days following final delivery. The contractor must comply with stringent packaging and marking standards, including MIL-STD-2073-1 for preservation and MIL-STD-129 for labeling. Administrative requirements include electronic invoicing through the Wide Area Workflow system and compliance with cybersecurity standards under DFARS 252.204-7012. Additionally, the contractor must provide Safety Data Sheets and GHS-compliant labels for any hazardous materials and follow specific procedures for engineering change proposals and variance requests.
Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in 18 days
View Details
NAICS: 332510
New
SLED
Supply of Rail Fastening SystemsThis subcontract involves the supply of rail fastening systems and associated accessories for prime contractors working on Maryland Transit Administration light rail projects. The scope of work requires the provision of fasteners and tie anchor systems that are fully compatible with both standard and restraining rail concrete ties, ensuring all materials adhere to MTA and AREMA specifications. The specific deliverable for this contract is the provision of complete rail fastener sets for 1,000 concrete ties. Interested parties must submit their responses by November 17, 2026, in accordance with the solicitation posted on October 27, 2026.
Maryland Transit Administration

POSTED

about 19 hours ago

DEADLINE

in 20 days
View Details
NAICS: 332510
New
SLED
BABAA Compliant Reclamation Materials SupplierThis subcontract opportunity is for a supplier to provide specialized reclamation materials for prime contractors working on Virginia Department of Energy projects. The required supplies include 1/4 inch and 5/16 inch galvanized steel wire rope, galvanized earth and rock anchors from MacLean Power Systems or an equivalent brand, and certified seed and agricultural limestone. All materials must be delivered directly to the project site located in Blacksburg, Virginia. A critical requirement for this contract is the provision of formal certification ensuring all materials comply with the Build America, Buy America Act. Interested parties must submit their responses by November 2, 2026, to be considered for this procurement under NAICS code 332510.
Virginia Department of Energy

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
Supplier of Retaining Rings (NSN 5325-01-321-3445)This subcontract involves the manufacture or procurement of 112 retaining rings under NSN 5325-01-321-3445 to support prime contractors for the DLA Weapons Support ASC. The selected supplier is responsible for delivering the units to DLA Distribution DDSP in New Cumberland, Pennsylvania, ensuring all items are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Compliance with the Buy American Act and the Berry Amendment is mandatory for all materials used. Additionally, the contractor must maintain cybersecurity standards in accordance with NIST SP 800-171. The opportunity falls under NAICS code 332510 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Manufacture and Supply of T-Bolt ChocksThis subcontract involves the manufacture and supply of 247 T-Bolt Chocks for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier operations. The project requires precision machining and forming to meet Oshkosh Defense LLC part number 3361032 and NSN 5340014799208 specifications. Production must be carried out using CNC lathes and threading machines, ensuring all materials adhere to strict grade and alloy requirements. The contractor is obligated to comply with the Buy American Act and the DLA Master List of Technical and Quality Requirements. Performance of the contract will take place in New Cumberland, Pennsylvania. The procurement falls under NAICS code 332510, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
Manufacturer of Headless Straight Pins (Critical Safety Item)This subcontract involves the manufacture of 15 headless straight pins for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires precision machining and forming according to NSN 5315-00-182-5721 specifications, with performance taking place in Tracy, California. Due to the nature of the components, the manufacturer must adhere to Air Force Critical Safety Item quality standards and maintain SAE AS9100 or an equivalent aerospace quality management system certification. Additionally, all production must comply with the Berry Amendment and Buy American Act regarding domestic sourcing.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Supply of Mounting Brackets (NSN 5340017253800)This subcontract involves the manufacture or procurement of four mounting brackets under NSN 5340017253800 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all items undergo FAA Bare Item Marking per RQ046, with packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129 standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. Strict compliance is required regarding zero-based sampling plans and supply chain traceability as outlined in DLAD Procurement Note C03. Additionally, the provider must meet all requirements of the Buy American Act and NIST SP 800-171. The final deliverable consists of four marked and packaged brackets delivered in accordance with the specified Department of Defense guidelines.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
Supply of NSN 5340016806874This subcontract through the Department of Defense DLA Weapons Support Land Supply Chain requires the provision of 100 units of hardware component NSN 5340016806874. The selected vendor is responsible for manufacturing or sourcing the material and ensuring all items are packaged and marked in strict accordance with MIL-STD-2073-1E, RP001, MIL-STD-129, and RQ011 standards. Delivery of the components is required FOB Origin. Eligible bidders must hold Small Business certification and operate under NAICS code 332510. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026. This contract supports prime contractors fulfilling broader DLA supply obligations.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
Supply of Lever Brackets (NSN 5340016707390)This subcontract involves the manufacture and supply of lever brackets, identified by NSN 5340016707390, for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The selected provider is responsible for sourcing or producing the brackets according to strict technical specifications and ensuring all materials are packaged in compliance with TQ requirement IP025 and FED-STD-313 for hazardous materials. The contract operates under FOB Origin delivery terms, with a final delivery deadline of March 4, 2027. Performance will take place in Tracy, California, under NAICS code 332510. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
Supply of Mortise Latches (NSN 5340-00-794-0722)This subcontract involves the supply of 64 mortise latches, identified by NSN 5340-00-794-0722, for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The selected provider is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality control standards per MIL-STD-1916 or ASQ H1331 Table 1. All items must be packaged and marked according to MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. The final delivery of the 64 packaged and labeled units is designated as FOB Origin, with the place of performance located at Tinker AFB.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
Turnlock Fastener Stud SupplierThis subcontract involves the precision manufacture and supply of turnlock fastener studs, specifically NSN 5325010273515, to support prime contractors fulfilling DLA supply contracts. The production must strictly adhere to Reference Drawing 76301 6M148, Revision H and TDP Rev B Gen 3 for part numbers 3M303C5W-14 and 192015-5-14. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. The supplier is required to maintain compliance with several critical defense and security standards, including MIL-STD-129, DFARS 252.223-7008, and NIST SP 800-171. This engagement is managed through the Department of Defense via the DLA Weapons Support ASC Commodities Division, with a response deadline set for November 4, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Manufacturing and Supply of Clamp Loops (NSN 5340011313132)This subcontract involves the manufacture and supply of 437 Clamp Loops (NSN 5340011313132) for prime contractors supporting the DLA Weapons Support Active Devices Division. The project requires strict adherence to MIL-DTL-85052/1C Revision C and MIL-DTL-85052B Revision B specifications, as well as TDP Rev A Gen 1. All units must be of domestic origin and classified as Critical Application Items, with the supplier maintaining Qualified Products List approval. The contract is managed under NAICS code 332510 for the Department of Defense, with the place of performance located at Robins Air Force Base. Delivery of the 437 units is required on a FOB Origin basis. Interested parties must respond by the deadline of November 9, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 331110
New
DIBBS
Supply of Fastener-Grade Steel/AlloyThis HUBZone set-aside subcontract involves the supply of fastener-grade steel or alloy raw metal stock, provided as wire or bar, for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the metallurgical specifications of NSN 5310-01-137-6955 and be sourced domestically in compliance with the Buy American Act. The selected provider is responsible for delivering the raw metal stock directly to the manufacturer and providing Material Test Reports to verify that all technical standards have been met. This opportunity falls under NAICS code 331110 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 15 days
View Details
NAICS: 488510
New
DIBBS
Military-Grade Packaging and Marking ServicesThis HUBZone set-aside subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the packaging of small hardware components in strict accordance with MIL-STD-2073-1E and RP001 standards, ensuring all items are prepared for First Destination Transportation shipping. The contractor is responsible for applying shipping labels per MIL-STD-129 and utilizing military-specification materials to guarantee hardware survival during transit. The final deliverable consists of packaged and marked hardware ready for FOB Origin shipment. Interested parties must respond by November 12, 2026, under NAICS code 488510.
Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
Manufacturing of Plain Extended Washer Hexagon NutsThis HUBZone set-aside subcontract involves the manufacture and supply of 2,950 plain extended washer hexagon nuts for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the nuts according to NSN 5310-01-137-6955 and the DLA Master List of Technical and Quality Requirements RA001. Strict adherence to quality and regulatory standards is required, including quality control sampling per MIL-STD-1916 or ASQ H1331 and marking per MIL-STD-129. Additionally, all materials used in production must be compliant with the Buy American Act. The response deadline for this opportunity is November 12, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 15 days
View Details
NAICS: 488510
New
DIBBS
Defense-Compliant Packaging and Labeling ServicesThis subcontract for Defense-Compliant Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized packaging, marking, and labeling of hardware to ensure all shipments are ready for FOB Origin transport. All activities must strictly adhere to RP001 and ASTM D3951 packaging standards, with markings applied according to MIL-STD-129 using approved MIL-SPEC materials and compliant labeling systems. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed at Tinker AFB. Interested parties should note the response deadline of November 4, 2026, for this opportunity categorized under NAICS code 488510.
Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 313113
New
DIBBS
Manufacturer of Threaded Pin-Rivets (NSN 5320-01-451-8479)This subcontract involves the manufacture and delivery of 187 threaded pin-rivets meeting NSN 5320-01-451-8479 specifications for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work is performed at Tinker AFB and strictly prohibits the use of additive manufacturing. The contractor must adhere to rigorous regulatory and quality standards, including the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements. Additionally, strict security and trade compliance are required, specifically CMMC Level 2, DFARS 252.204-7012, ITAR, and EAR standards.
Thread Mills

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Supply of Keyway Washers (NSN 5310001162378)This subcontract involves the procurement of seven aerospace-grade keyway washers, specifically Boeing part number 114S1903-84 and NSN 5310001162378, to support prime contractors under DLA Weapons Support supply contracts. The selected supplier is responsible for sourcing or manufacturing the components in strict accordance with DFARS 252.223-7008 and DFARS 252.225-7001 regulations, with all packaging and marking requirements adhering to MIL-STD-129. The contract is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division under NAICS code 336413. Delivery of the units is designated as FOB Origin, with the place of performance located in New Cumberland, Pennsylvania. The solicitation period opens on October 27, 2026, with a response deadline of November 4, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves supplying packaging materials and performing final marking for components to ensure they are fully prepared for shipment to Tinker AFB. All work must be executed in strict accordance with MIL-STD-129, MIL-STD-130N, and DLA requirement RP001, with additional compliance required for hazardous materials under TQ requirement IP025 when applicable. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract falls under NAICS code 488510. The place of performance is located at Tinker AFB, zip code 73145-8000. Interested parties should note the response deadline of November 4, 2026.
Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332813
New
DIBBS
NADCAP Accredited Special Process ServicesThis subcontract involves the provision of NADCAP accredited special process services for the DLA Weapons Support ASC Commodities Division, with performance taking place at Tinker AFB. The scope of work requires the execution of specialized aerospace processes, specifically heat treating, chemical processing, and Non-Destructive Testing, in strict accordance with Drawing 20145214 and requirement RQ040. To be eligible, the contractor must maintain NADCAP accreditation for all performed processes and hold JCP certification to ensure authorized access to necessary technical data. The final deliverables for this engagement include the processed aerospace components along with the corresponding certification reports.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Precision Machining and Fabrication of Aircraft Structural SupportsThis subcontract involves the precision machining and fabrication of six aircraft structural component supports for the DLA Weapons Support ASC Commodities Division, with performance taking place at Tinker AFB. The contractor is responsible for manufacturing components to strict dimensional tolerances in accordance with Drawing 43999 L2102067 and ASME Y14.31 standards, while implementing zero-based sampling plans as mandated by MIL-STD-1916. To qualify for the contract and gain necessary access to ITAR data, the provider must maintain ISO 9001:2015, CMMC Level 2, and JCP certifications. The project falls under NAICS code 336413 and requires adherence to rigorous Department of Defense quality and security specifications.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493110
New
DIBBS
Defense-Compliant Packaging and PalletizationThis subcontract involves providing specialized packaging and palletization services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging of 64 bushing units using MIL-SPEC materials and equipment, ensuring strict adherence to ASTM D3951, MIL-STD-129, and RP001 palletization standards, as well as the DLA Master List of Technical and Quality Requirements. The completed units are to be marked and delivered to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. This requirement falls under NAICS code 493111 and is managed by the Department of Defense.
General Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Manufacture of Sleeve Bushings (NAS537B5P024)This subcontract involves the manufacture of 64 precision sleeve bushings, part number NAS537B5P024, for the DLA Weapons Support ASC Commodities Division. The project requires the use of traditional machining processes, as additive manufacturing is strictly prohibited. All materials used in production must adhere to the Buy American Act and the Berry Amendment to ensure domestic compliance. The selected contractor must hold ISO 9001:2015 and SAE AS9003 certifications to ensure quality standards are met. The final deliverable consists of 64 finished and inspected units to be performed at Tinker AFB. The response deadline for this requirement is November 4, 2026.
Machine Shops

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332510
New
DIBBS
CATCH, FLUSH
Solicitation # SPE7L1-27-T-2074
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-27-T-6019
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
WINDSHIELD ASSEMBLY, AI
Solicitation # SPE4A5-27-T-1687
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-27-T-6126
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
PIVOT, PIN
Solicitation # SPE4A6-27-T-6432
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
FIXED LIGHT ASSEMBLY
Solicitation # SPE7M4-27-T-1711
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L5-27-T-0316
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-27-T-1846
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-27-T-2005
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 332510
Awarded
DIBBS
HOOK, SCREW
Solicitation # SPE7L1-27-T-1691
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 332510
New
DIBBS
KEY, MACHINE
Solicitation # SPE4A6-27-T-6421
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
BOOT, DUST AND MOISTURE
Solicitation # SPE7L1-27-T-2268
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 5 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS